The single-fibre pull-out test. 1: Review and interpretation

Composites Part A: Applied Science and Manufacturing

Volumn 27, Issue 8 PART A, 1996, Pages 597-612

  DiFrancia, Célene ^a   Ward, Thomas C ^b   Claus, Richard O ^b  

^a Loctite Corp   (United States)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Interpretation; Load extension trace; Review; Single fibre pull out test

Indexed keywords

CHEMICAL BONDS; CRACK INITIATION; CRACK PROPAGATION; FAILURE (MECHANICAL); FIBER REINFORCED PLASTICS; FRICTION; LOADS (FORCES); MATHEMATICAL MODELS; OPTICAL FIBERS; POLYMERS; SHEAR STRESS; STRAIN RATE;

CRITICAL STRAIN ENERGY RELEASE RATE; FRICTION COEFFICIENT; INTERFACIAL SHEAR STRESS; LOAD EXTENSION TRACE; SINGLE FIBRE PULL OUT TEST;

MECHANICAL TESTING;

EID: 0029699654     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/1359-835X(95)00069-E     Document Type: Article

References (75)

1. Chambers, R.E. and McGarry, F.J. Paper presented at '14th Annual Technology and Management Conf.', Reinforced Plastics Division, SPI, February 1957, Section 12-B
2. Haslett, W.H. and McGarry, F.J. Paper presented at '17th Annual Technology and Management Conf.', Reinforced Plastics Division, SPI, February 1962, Section 14-D
3. Kelly, A. and Tyson, W.R. Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum. J. Mech. Phys. Solids 1965, 13, 329
4. Broutman, L.J. Glass-resin joint strengths and their effect on failure mechanisms in reinforced plastics. Polym. Eng. Sci. 1966, 263
5. Broutman, L.J. Measurement of the fiber-polymer matrix interfacial strength. In 'Interfaces in Composites', ASTM STP 452, American Society for Testing and Materials, Philadelphia, PA, 1969, p. 2741
6. Greszczuk, L.B. Theoretical studies of the mechanics of the fiber-matrix interface in composites. In 'Interfaces in Composites', ASTM STP 452, American Society for Testing and Materials, Philadelphia, PA, 1969, pp. 42-58
7. Outwater, J.O. and Murphy, M.C. On the fracture energy of unidirectional laminates. Paper presented at '24th Annual Techical Conf.', Reinforced Plastics/Composites Division, The Society of the Plastics Industry, Inc., 1969, Section 11-C, pp. 1-8
8. Kelly, A. Interfacial effects and the work of fracture of a fibrous composite. Proc. Roy. Soc. 1970, A319, 95
9. Favre J.P. and Perrin J. Carbon fibre adhesion to organic matrices. J. Mater. Sc.. 1972, 7, 1113
10. Lawrence, P. Some theoretical considerations of fibre pull-out from an elastic matrix. J. Mater. Sci. 1972, 7, 1
11. Takaku, A. and Arridge, R.G.C. The effect of interfacial radial and shear stress on fibre pull-out in composite material. J. Phys. D: Appl. Phys. 1973, 6, 2038
12. Morton, J. and Groves, G.W. The effect of metal wires on the fracture of a brittle-matrix composite. J. Mater. Sci. 1976, 11, 617
13. Hadjis, N. and Piggott, M.R. The effect of matrix stresses on fibre pull-out forces. J. Mater. Sci. 1977, 12, 358
14. Bowling, J. and Groves, G.W. The debonding and pull-out of ductile wires from a brittle matrix. J. Mater. Sci. 1979, 14, 431
15. Bowling, J. and Groves, G.W. The propagation of cracks in composites consisting of ductile wires in a brittle matrix. J. Mater. Sci. 1979, 14, 443
16. Drzal, L.T., Rich, M.J. and Lloyd, P.F. Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment. J. Adhes. 1982, 16, 1
17. Emadipour, H., Chiang, P. and Koenig, J. L. Interfacial strength studies of fibre-reinforced composites. Res. Mechanics 1982, 5, 165
18. Drzal, L.T., Rich, M.J., Koenig, M.F. and Lloyd, P.F. Adhesion of graphite fibers to epoxy matrices: II. The effect of fiber finish. J. Adhes. 1983, 16, 133
19. Bascom, W.D., Boll, D.J., Fuller, B. and Phillips, P.J. Fractography of the interlaminar fracture of carbon fibre epoxy composites. J. Mater. Sci. 1985, 20, 3184
20. Chua, P.S. and Piggott, M.R. The glass fibre-polymer interface: I - Theoretical considerations for single fiber pull-out tests. Compos. Sci. Technol. 1985, 22, 33
21. Chua, P.S. and Piggott, M.R. The glass fibre-polymer interface: II - Work of fracture and shear stress. Compos. Sci. Technol. 1985, 22, 107
22. Chua, P.S. and Piggott, M.R. The glass fibre-polymer interface: III - Pressure and the coefficient of friction. Compos. Sci. Technol. 1985, 22, 185
23. Bascom, W.D. and Jensen, R.M. Stress transfer in single fiber/ resin tensile tests. J. Adhes. 1986, 19, 219
24. DiBenedetto, A.T., Nicolais, L. Ambrosio, L. and Groeger, J. Stress transfer and fracture in single fiber/epoxy composites. In 'Composite Interfaces (Eds H. Ishida and J.L. Koenig), Elsevier Science Publishing Co. Inc., 1986, pp. 47-54
25. Piggott, M.R., Sanadi, A., Chua, P.S. and Andison, D. Mechanical interactions in the interphasial region of fibre reinforced thermosets. In 'Composite Interfaces' (Eds H. Ishida and J.L. Koenig), Elsevier Science Publishing Co. Inc., 1986, pp. 109-121
26. Miller, B., Muri, P. and Rebenfeld, L. A microbond method for determination of the shear strength of a fiber/resin interface. Compos. Sci. Technol. 1987, 28, 17
27. Parry, T.V., Wilson, J.M. and Leck, D.C. Pull-out of steel fasteners from a laminated composite subjected to external pressure. Compos. Sci. Technol. 1987, 28, 279
28. Piggott, M.R. Debonding and friction at fibre-polymer interfaces, I. Criteria for failure and sliding. Compos. Sci. Technol. 1987, 30, 295
29. Piggott, M.R. The effect of the interface/interphase on fiber composite properties. Polym. Compos. 1987, 8, 291
30. Piggott, M.R. and Andison, D. The carbon fibre-epoxy interface. J. Reinf. Plast. Compos. 1987, 6, 290
31. Piggott, M.R. and Chua, P.S. Recent studies of the glass fiber-polymer interphase. Ind. Eng. Chem. Res. 1987, 26, 672
32. Desio, G.P., Miller, B. and Rebenfeld, L. The microbond method for the evaluation of interfacial shear strengths of composites. Paper presented at 'AIChE Annual Meeting', Washington, DC, 28 November, 1988
33. Gao, Y-C., Mai, Y-W and Cotterell, B. Fracture of fiber-reinforced materials. J. Appli. Math. Phys. (ZAMP) 1988, 39, 550
34. McAlea, K.P. and Besio, G.J. Adhesion between PBT and E-glass measured with a microdebond technique. Polym. Compos. 1988, 9, 285
35. Morrison, J.K., Shah, S.P. and Jeng, Y.S. Analysis of fiber debonding and pull-out in composites. J. Eng. Mech. 1988, 114, 277
36. Narkis, M., Chen, J.H. and Pipes, R.B. Review of methods for characterization of interfacial fiber-matrix interaction. Polym. Compos. 1988, 9, 245
37. Piggott, M.R. Debonding and friction at fibre-polymer interfaces. II. Macroscopic model experiments. Compos. Sci. Technol. 1988, 31, 15
38. Waite, S.R. and Sage, G.N. The failure of optical fibers embedded in composite materials. Composites. 1988, 19, 288
39. Argawal, R.K. and Drzal, L.T. Effects of microwave processing on fiber-matrix adhesion in composites. J. Adhes. 1989, 29, 63
40. Cook, R.F., Thouless, M.D., Clarke, D.R. and Kroll, M.C. Stick-slip during fiber pull-out. Scripta Metall. 1989, 23, 1725
41. Guar, U. and Miller, B. Microdebond method for determination of the shear strength of a fiber resin interface: evaluation of experimental parameters. Compos. Sci. Technol. 1989, 34, 35
42. Latour, R.A., Black, J. and Miller, R. Fatigue behavior characterization of the fiber-matrix interface. J. Mater. Sci. 1989, 24, 477
43. Overton, B.J. and Taylor, C.R. Time temperature dependence of dual coated lightguide pull-out measurements. Polym. Eng. Sci. 1989, 29, 1169
44. Palley, I. and Stevens, D. A fracture mechanics approach to the single fiber pull-out problem as applied to the evaluation of the adhesion strength between the fiber and the matrix. J. Adhes. Sci. Technol. 1989, 3, 141
45. Penn, L.S. and Jutis, B. The effect of pendent groups at the fiber surface on interfacial adhesion. J. Adhes. 1989, 30, 67
46. Penn, L.S. and Lee, S.M. Interpretation of experimental results in the single pull-out filament test. J. Compos. Technol. Res. 1989, 11, 23
47. Piggott, M.R. and Roberedo, M.M. The properties of the interface between fibers and polymers. In 'Proc. 34th Int. SAMPE Symp. 8-11 May 1989, p. 1913
48. Sigl, L.S. and Evans, A.G. Effects of residual stress and frictional sliding on cracking and pull-out in brittle matrix composites. Mech. Mater. 1989, 8, 1
49. Gaur, U. and Miller, B. Effects of environmental exposure on fiber/epoxy interfacial shear strength. Polym. Compos. 1990, 11, 217
50. Hutchinson, J.W. and Jensen, H.M. Model of fiber debonding and pull-out in brittle composites with friction. Mech. Mater. 1990, 9, 139
51. Lee, S.M. and Holguin, S. A new single fiber/resin interface test for high crosslinked resin systems. J. Adhes. 1990, 31, 91
52. Leung, C.K.Y. and Li, V.C. Applications of a two-way debonding theory to short fibre composites. Composites 1990, 21, 305
53. Mäder, E. and Freitag, K.-H. Interface properties and their influence on short fibre composites. Composites 1990, 21, 397
54. Penn, L.S. and Chou, C.T. Identification of factors affecting single filament pull-out test results. J. Compos. Technol. Res. 1990, 12, 164
55. Pitkethly, M.J. and Doble, J.B. Characterizing the fiber/matrix interface of carbon fibre-reinforced composites using a single fiber pull-out test. Composites 1990, 21, 389
56. Biro, D.A., McLean, P. and Deslandes, Y. Application of the microbond technique: characterization of carbon-epoxy interfaces, Polym. Eng. Sci. 1991, 37, 1250
57. Chou, CT. and Penn, L.S. Chemical bonding and physical interaction by attached chains at the fiber-matrix interface. J. Adhes. 1991, 36, 1125
58. Désarmot, G. and Favre, J.-P. Advances in pull-out testing and data analysis. Compos. Sci. Technol. 1991, 42, 151
59. DiFrancia, C.D., Claus, R.O., Hellgeth, J.W. and Ward, T.C. Characterization of polyimide-coated optical fibers for embedding in epoxy resin for the development of smart composite structures. In 'Proc. Adhesion Society Fourteenth Annual Meeting', Clearwater, FL, 1991
60. Hughs, J.D.-H. The carbon fibre/epoxy interface - a review. Compos. Sci. Technol. 1991, 41, 13
61. Marshall, P. and Price, J. Fibre/matrix interface property determination. Composites 1991, 22, 53
62. Miller, B., Gaur, U. and Hirt, D. Measurement and mechanical aspects of the microbond pull-out technique for obtaining fiber/ resin interfacial strength. Compos. Sci. Technol. 1991, 42, 207
63. Piggott, M.R. Failure processes in the fibre-polymer interphase. Compos. Sci. Technol. 1991, 42, 57
64. Qui, Y. and Schwartz, P. A new method for study of the fiber-matrix interface in composites: single fiber pull-out from a microcomposite. J. Adhes. Sci. Technol. 1991, 5, 741
65. Rao, V. and Drzal, L.T. The dependence of internal shear strength on matrix and interphase properties. Polymer Composites 1991, 12, 48
66. Wang, S.J., Baptiste, D., Bompard, P. and François, D. Microscopic failure mechanism of a unidirectional glass fiber composite. Fatigue Fract. Eng. Mater. 1991, 14, 391
67. Jiang, K.R. and Penn, L.S. Improved analysis and experimental evalution of the single filament pull-out test. Compos. Sci. Technol. 1992, 45, 89
68. Moon, C.K., Lee, J.O., Cho, H.H. and Kim, K.S. Effect of diameter and surface treatment of fiber on ISS in glass fiber/epoxy and HDPE. J. Appl. Polym. Sci. 1992, 45, 443
69. Piggott, M.R. Interfaces properties and their influence of fiber-reinforced polymers. In 'Composite Applications The Role of Matrix, Fiber, and Interface' (Eds T. Vigo and B. Kinzig, VCH Publishers, Inc., 1992, pp. 221-265
70. Personal communication with L.S. Penn
71. DiFrancia, C., Ward, T.C. and Claus, R.O. The single-fiber pull-out test. 2: The quantitative evaluation of an uncatalysed TGDDM/DDS epoxy cure study. Composites Part A: Appl. Sci. Manuf. 1996, 27A,
72. DiFrancia, C. The single fiber pull-out test: a study of fiber/ matrix interactions. Dissertation, Virginia Polytechnic Insitute and State University, 1992
73. Hampe, A. and Marotzke, C. Adhesion of polymers to reinforcing fibers. Polym. Int. 1992, 28, 313
74. Marshall, P. and Leonard, J. The dependence of data from single fiber pull-out tests on the loading direction. J. Mater. Sci. Lett. 1992, 11, 1401
75. Jurek, M.J. and McGrath, J.E. Synthesis and characterization of amine terminated poly(arylene ether sulfone) oligomers. Polymer 1989, 30, 1551