Long-term durability of fiber-reinforced polymer-matrix composite materials for infrastructure applications: A review

Journal of Advanced Materials

Volumn 30, Issue 4, 1998, Pages 3-40

  Liao, Kin ^a   Schultheisz, Carl R ^b   Hunston, Donald L ^b   Brinson, L Catherine ^c  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^c Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 2442701667     PISSN: 10709789     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (402)

1. Chambers, R. E., "Structural Fiber Glass-Reinforced Plastics for Building Applications," Plastics in Buildings, I. Skeist Ed., Reinhold Publishing Co., New York, 1965, pp. 72-118.
2. Hollaway, L., Glass Reinforced Plastics in Construction: Engineering Aspects, John Wiley & Sons, New York, 1978.
3. Cheremisinoff, N. P. and Cheremisinoff, P. N., Fiberglass-Reinforced Plastics Deskbook, Ann Arbor Science, Ann Arbor, 1978.
4. Makowski, Z. S., "Symbiosis of Architecture and Engineering in the Development of Structure Uses of Plastics," in Plastics in Material and Structural Engineering, R. A. Bares, et al., Eds., Elsevier Scientific Publishing Company, New York, 1982, pp. 59-72.
5. Dunkers, K. F., Klaiber, F. W., and Sanders, W. W., Jr., Bridge Strengthening Needs in the United States, Transportation Research Record 1118, Transportation Research Board, Washington, D. C., 1987.
6. Ballinger, C. A., "Development of Composites for Civil Engineering," Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer and R. Sen Eds., American Society of Civil Engineers, New York, 1991, pp. 288-301.
7. High-Performance Construction Materials and Systems: An Essential Program for America and Its Infrastructure, Executive Report 93-5011.E, The Civil Engineering Research Foundation, April, 1993.
8. Zelinski, R., "Bridge Retrofit Concepts," SAMPE Journal, Vol. 32, No. 3, May/June 1996, pp. 50-56.
9. Polymers and Polymer Composites in Construction, L. Hollaway, Ed., Thomas Telford Ltd, London, 1990.
10. Barbero, E. and Ganga Rao, H. V. S., "Structural Applications of Composites in Infrastructure, Part I," SAMPE Journal, Vol. 27, No, 6, November/December 1991, pp. 9-16.
11. Barbero, E. and Ganga Rao, H. V.S., "Structural Applications of Composites in Infrastructure, Part II," SAMPE Journal, Vol. 28, No. 1, January/February 1992, pp. 9-16.
12. Ganga Rao, H. V. S. and Barbero, E. in International Encyclopedia of Composites, S. M. Lee Ed., Vol. 6, VCH, New York, 1991, pp. 173-187.
13. Eckold, G., Design and Manufacture of Composite Structures, McGraw-Hill, Inc., New York, 1993.
14. "Infrastructure: New Materials and Methods of Repair," Proceedings of the Third Materials Engineering Conference, K. D. Basham Ed., San Diego, CA, November 13-16, 1994.
15. Brailsford, B., Milkovich, S. M., Prine, D. W., Fildes, J. M., Hopwood, T., and Harik, L, Definition of Infrastructure Specific Markets for Composite Materials, Project P93-121/A573, Industrial Research Laboratory, Northwestern University, July, 1995.
16. Loud, S., "Three Steps Toward a Composites Revolution in Construction," SAMPE Journal, Vol. 32, No. 1, January/ February, 1996, pp. 30-35.
17. Fiber Composites in Infrastructure, Proceedings of the First International Conference on Composites in Infrastructure (ICCI 96), H. Saadatmanesh and M. R. Ehsani Eds., Tucson, AZ, January 15-17, 1996.
18. Proceedings of Composites Institute's 51st Annual Conference, Cincinnati, OH, February 5-7, 1996.
19. Glass Fiber Reinforced Plastics: Building Applications (Feb 72 - Present), Citations from the RAPRA Technology Limited, National Technical Information Service, Springfield, VA, January, 1995.
20. Pultrusion of Reinforced Plastics (July 90 - Present), Citations from the RAPRA Technology Limited, National Technical Information Service, Springfield, VA. January, 1995.
21. Ohama, Y, "Polymer-Based Materials for Repair and Improved Durability: Japanese Experience," Construction and Building Materials, Vol. 10, No. 1, 1996, pp. 77-82.
22. "Hand Laminated FRP Beams Hold Tolerance on Amex Building," Plastics Design & Processing, April, 1980, pp. 40-41.
23. Ainsworth, L., "Fibre-Reinforced Plastic Pipes and Applications," Composites, July, 1981, pp. 185-190.
24. Meier, U., "Proposal for a Carbon Fibre Reinforced Composite Bridge Across the Strait of Gibraltar at Its Narrowest Site," Proceedings of the Institution of Mechanical Engineers, Vol. 201, No. B2, 1987, pp. 73-78.
25. Starr, T. F., "Structural Applications for Pultruded Profiles," Composite Structures, Vol. 2, I. H. Marshall Ed, Applied Science Publishers, New York, 1983, pp. 192-211.
26. Starr, T. F., "FRP Geodesic Domes: One Example," Composite Structures, Vol. 3, I. H. Marshall Ed., Elsevier Applied Science, New York, 1985, pp. 164-177.
27. Iyer, S. L., "Advanced Composite Demonstration Bridge Deck," Proceedings of International Symposium on Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, A. Nanni and C. W. Dolan Eds., American Concrete Institute, pp. 831-852.
28. GangaRao, H. V. S. and Sotiropoulos, S. N., Development of FRP Bridge Superstructural Systems, Report for West Virginia Department of Transportation, June, 1991.
29. Meier, U., "Carbon Fiber-Reinforced Polymers: Modern Materials in Bridge Engineering," Structural Engineering International, 1/92, pp. 7-12.
30. Meier, U., and Kaiser, H., "Strengthening of Structures with CFRP Laminates," Advanced Composites Materials in Civil Engineering Structures, S. L. Iyer and R. Sen Eds., American Society of Civil Engineers, 1991, pp. 224-233.
31. Meier, U., Deuring, M., Meier, H., and Schwegler, G., "Strengthening of Structures with CFRP Laminates: Research and Applications in Switzerland," Advanced Composite Materials in Bridges and Structures, K. W. Neale and P. Labossiere Eds., Canadian Society for Civil Engineering, 1992, pp. 243-251.
32. Kim, P. and Meier, U., "CFRP Cables for Large Structures," Advanced Composite Materials in Civil Engineering Structures Proceedings, MT Div/ASCE, Las Vegas, NV, January 31, 1991, pp. 233-244.
33. Miesseler, H. J., and Wolff, R., "Experience with Fiber Composite Materials and Monitoring with Optical Fiber Sensors," Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer and R. Sen Eds., American Society of Civil Engineers, New York, 1991, pp. 167-180.
34. Muto, N., Yanagida, H., Nakatsuji, T., Sugita, M., Ohtsuka, Y., and Arai, Y., "Self-Diagnosis of Fracture in CFGFRP Composites and CFGFRP-Reinforced Concrete," Journal of the Ceramic Society of Japan, Vol. 100, No. 12, 1992, pp. 1429-1434.
35. Muto, N., Yanagida, H., Nakatsuji, T., Sugita, M., Ohtsuka, Y., Arai, Y., and Takada, K., "Self-Diagnosis Performance of Fracture in CFGFRP-Reinforced Concrete," Journal of the Ceramic Society of Japan, Vol. 101, No. 8, 1993, pp. 860-866.
36. Handbook of Composites, G. Lubin Ed., Van Nostrand Reinhold Co., New York, NY, 1982.
37. Jones, R. M., Mechanics of Composite Materials, Scripta Book Company, Washington, D. C., 1975.
38. Tsai, S. W. and Hahn, H. T., Introduction to Composite Materials, Technomic Publishing Co. Inc., Lancaster, PA, 1980.
39. Falat, L., "Choosing Cost-Effective Applications for Fiber-Reinforced Plastics in the Pulp and Paper Industry," Modern Plastics, June, 1990, pp. 54-60.
40. Chiu, A. and Franco, R. J., "FRP Linepipe for Oil and Gas Production," Modern Plastics, June, 1990, pp. 21-27.
41. Karbhari, V. M., "Composites and Infrastructure: A Perspective Influence by a Panel Study in Japan," SAMPE Journal, Vol. 29, No. 3, May/June, 1993.
42. Green, A., Bisarnsin, T., and Love, E. A., "Pultruded Reinforced Plastics for Civil Engineering Structural Applications," Proceedings of the 47th Annual Conference, Composites Institute, The Society of the Plastics Industry, Inc., February, 1992, section 15-B.
43. Green, A. "Glass-Fiber-Reinforced Composites in Building Construction," Transportation Research Record 1118, Transportation Research Board, Washington, D. C., 1987.
44. Tsuji, Y., Kanda, M., and Tamura, T., "Applications of FRP Materials to Prestressed Concrete Bridges and Other Structures in Japan," PCI Journal, July/August 1993, pp. 50-58.
45. Kaempten, C. E., "Structural Applications of Composite Materials to Highway Tunnels," Transportation Research Record 1223, Transportation Research Board, Washington, D. C., 1992.
46. Kelley, D. H., "FRP Equipment for Treating Waste Incineration Gases," Modern Plastics, January, 1994, pp. 72-75.
47. Dively, R. W., II, and Moore, S., "Designing with Pultruded FRP Shapes for Corrosion Control," Modern Plastics, January, 1994, pp. 68-71.
48. Harik, I. E., Robson, B. N., and Hopwood, T., II, "FRP Structures for Infrastructural Applications," Proceedings of the 10th Annual ASM/ESD Advanced Composites Conference, Dearborn, MI, November 7-10, 1994, pp. 1-4.
49. Proceedings of the International Symposium on Fiber-Reinforced-Plastic Reinforcement for Concrete Structure, A. Nanni and C. W. Dolan Eds., American Concrete Institute, 1993.
50. Bank, L., "Questioning Composites," Civil Engineering, January 1993, pp. 64-65.
51. "Image Building for Pultruded Products," Reinforced Plastics, Vol. 38, No. 10, 1994, pp. 32-34.
52. "Studies Reflect Growing Interest in Pultrusions for Civil Engineering Uses," Advanced Materials, Vol. 16, No. 6, March 28, 1994.
53. Dawson, D. K., "Composite Vessels Meet Corrosion Challenges," Composites Technology, November/December, 1995, pp. 23-30.
54. Salama, M. M., "Advanced Composites for the Offshore Industry: Applications and Challenges," Revue De L Institut Francais Du Petrole, Vol. 50, No. 1, Janvier- Fevrier, 1995, pp. 19-26.
55. "Pultruded Bridge Carries the Heaviest Trucks," British Plastics and Rubber, April, 1995, p. 35.
56. Loud, S., " 'Spaces' Bridge Design," Composites Technology, July/August 1995, pp. 40-42.
57. Composites Technology, May/June 1995, pp. 5-11.
58. Composites News: Infrastructure, Issue No. 22, 17 March, 1995.
59. Composites News: Infrastructure, Issue No. 23, 31 March, 1995.
60. Composites News: Infrastructure, Issue No. 29, 17July, 1995.
61. Composites News: Infrastructure, Issue No. 46, May 31, 1996.
62. High Performance Composites, January/February, 1995, p. 8.
63. Loud, S., "California Prepares for 'The Big One' With Composite Retrofitting," Composites Technology, November/December, 1995, pp. 32-35.
64. Hart, G. C., "Composites Are the Future for Seismic Design of Building," Composites Technology, November/December, 1995, p. 15.
65. "Building Bridges to Wider Markets," The Engineer, 10 June, 1993, pp. 33-34.
66. "Pultrusion - Unlimited Potential?" Advanced Materials News, May 1995, pp. 10-11.
67. "Composites in the Building Industry," Advanced Composites Bulletin, July, 1991, pp. 11-12.
68. Composites Industry Monthly, Issue No. 68, May 1995.
69. Tarricone, P., "Composite Sketch," Civil Engineering, May, 1995, pp. 52-55.
70. "All-Composite Navy Pier Ready for Testing," High Performance Composites, January/February, 1995, p. 8.
71. CONMAT News, Civil Engineering Research Foundation, No. 4, Spring, 1996.
72. FRP Composites in Construction Applications, A Profile in Progress, The SPI Composites Institute, 1995.
73. "Carbon Plate Stops the Cracks," Reinforced Plastics, Vol. 39, No. 7/8, 1995, pp. 34-37.
74. McConnell, V. P., "Demo Bridge Benchmarks Composites," High-Performance Composites, July/August, 1996, pp. 37-41.
75. Dawson, D. K., "Architectural Composites are Now Primary Structures," Composites Technology, September/October 1996, pp. 48-50.
76. Composites Technology, September/ October 1996, p. 8.
77. Holmes, M. and Al-Khayatt, Q. J., "Structural Properties of GRP," Composites, Vol. 6, July, 1975, pp. 157-165.
78. Sonti, S. S. and Barbero, E. J., "Detemination of Shear Properties for RP Pultruded Composites," Journal of Reinforced Plastics and Composites, Vol. 14, April 1995, pp. 390-401.
79. Mottram, J. T., "Compression Strength of Pultruded Flat Sheet Material," Journal of Materials in Civil Engineering, Vol. 6, No. 2, May, 1994, pp. 185-200.
80. Bank, L. C., "Properties of Pultruded Fiber Reinforced Plastic Structural Members," Transportation Research Record 1223, Washington, D.C., 1992, pp. 117-124.
81. Barbero, E. J., "Pultruded Structural Shapes - From the Constituents to the Structural Behavior," SAMPE Journal, Vol. 27, No. 1, January/February 1991, pp. 25-30.
82. Mosallam, A. S. and Bank, E. C., "Short-Term Behavior of Pultruded Fiber-Reinforced Plastic Frame," Journal of Structural Engineering, Vol. 118, No. 7, July, 1992, pp. 1937-1954.
83. Mosallam, A. S., Abdelhamid, M. K., and Conway, J. H., "Performance of Pultruded FRP Connections under Static and Dynamic Loads," Journal of Reinforced Plastics and Composites, Vol. 13, May 1994, pp. 386-407.
84. Bank, E. C., Mosallam, A. S., and McCoy, G.T., "Design and Performance of Connections for Pultruded Frame Structures," Journal of Reinforced Plastics and Composites, Vol. 13, March 1994, pp. 199-212.
85. Lee, J., Hollaway, E., Thorne, A., and Head, P.,"The Structural Characteristic of a Polymer Composite Cellular Box Beam in Bending," Construction and Building Materials, Vol. 9, No. 6, 1995, pp. 333-340.
86. Yen, S. C., Gopal, P., and Dharani, E. R., "Fabrication and Characterization of Tapered Graphite/Epoxy Box Beams," SAMPE Quarterly, April, 1993, pp. 47-50.
87. Nagaraj, V. and GanagRao, V.S., "Characterization of GFRP Pultruded Box Beams Under Static and Fatigue Loads," SAMPE Quarterly, July, 1993, pp. 3-9.
88. Bank, E. C., Yin, J., and Nadipelli, M., "Local Buckling of Pultruded Beams - Nonlinearity, Anisotropy and Inhomogeneity," Construction and Building Materials, Vol. 9, No. 6, 1995, pp. 325-331.
89. Barbero, E. J. and Raftoyiannis, I. G., "Euler Buckling of Pultruded Composite Columns," Composite Structures, Vol. 24, 1993, pp. 139-147.
90. Barbero, E. J. and Raftoyiannis, I. G., "Local Buckling of FRP Beams and Columns," Journal of Materials in Civil Engineering, Vol. 5, No. 3, August 1993, pp. 339-355.
91. Hollaway, L., and Ishakian, V. G., " The Analysis of G. R. P. Skeletal / Continuum Structures," Plastics in Material and Structural Engineering, R. A. Bares, et al., Eds., Elsevier Scientific Publishing Company, New York, 1982, pp. 183-194.
92. Nanni, A., Bakis, C. E., and Boothby, T. E., "Test Methods for FRP-Concrete Systems Subjected to Mechanical Loads: State of the Art Review," Journal of Reinforced Plastics and Composites, Vol. 14, June, 1995, pp. 524-558.
93. Saadatmanesh, H. and Ehsani, M. R., "RC Beams Strengthened with GFRP Plates, I: Experimental Study," Journal of Structural Engineering, Vol. 117, No. 11, November, 1991, pp. 3417-3433.
94. Gentry, T. R., and Bank, L. C., "Application of FRP Reinforcement in Structural Precast Concrete," Infrastrucure: New Materials and Methods of Repair, Proceedings of the 3rd Materials Engineering Conference, K. D. Basham Ed., San Diego, CA, November 13-16, 1994, pp. 575-582.
95. An, W., Saadatmanesh, H., Ehsani, M. R., "RC Beams Strengthened with GFRP Plates, II: Analysis and Parametric Study," Journal of Structural Engineering, Vol. 117, No. 11, November, 1991, pp. 3434-3455.
96. Sharif, A., Al-Sulaimani, G. J., Basunbul, I. A., Baluch, M. H., and Ghaleb, B. N., "Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP Plates," ACI Structural Journal, March-April, 1994, pp. 160-168.
97. Chajes, M. J., Januszka, T. F., Mertz, D. R., Thomson, T. A., Jr., and Finch, W. W., Jr., "Shear Strengthening of Reinforced Concrete Beams Using Externally Applied Composite Fabrics," ACI Structural Journal, May-June, 1995, pp. 295-303.
98. Triantafillou, T. C. and Meier, U., "Innovative Design of FRP Combined with Concrete," Advanced Composite Materials in Bridges and Structures, 1992, pp. 491-500.
99. Deskovic, N., Triantafillou, T. C., and Meier, U., "Innovative Design of FRP Combined with Concrete: Short-Term Behavior," Journal of Structural Engineering, July 1995, pp. 1069-1078.
100. Triantafillou, T. C. and Deskovic, N., "Innovative Prepressing with FRP Sheets: Mechanics of Short-Term Behavior," Journal of Engineering Mechanics, Vol. 117, No. 7, July 1991, pp. 1652-1672.
101. Faza, S. S., "Bending and Bond Behavior of Concrete Beams Reinforced with Fiber-Reinforced Plastic Rebars," Dissertation, College of Engineering, West Virginia University, Morgantown, WV, 1991.
102. Plevris, N. and Triantafillou, T. C., "FRP-Reinforced Wood as Structural Material," Journal of Materials in Civil Engineering, Vol. 4, No. 3, August, 1992, pp. 300-317.
103. Fardis, M. N. and Khalili, H. H., "FRP-Encased Concrete as a Structural Materials," Magazine of Concrete Research,Vol. 34,No. 121, December, 1982, pp. 191-202.
104. Ritchie, P. A., Thomas, D. A., Lu, L., and Connely, G. M., "External Reinforcement of Concrete Beams Using Fiber Reinforced Plastics," ACI Structural Journal, July-August, 1991, pp. 490-500.
105. Triantafillou, T. C., Deskovic, N., and Deuring, M., "Strengthening of Concrete Structures with Prepressed Fiber Reinforced Plastic Sheets," ACI Structural Journal, May-June, 1992, pp. 235-244.
106. Nanni, A. and Norris, M. S., "FRP Jacketed Concrete Under Flexural and Combined Flexural Compression," Construction and Building Materials, Vol. 9, No. 5, 1995, pp. 273-281.
107. Hoppel, C. P. R., Bogetti, T. A., and Gillespie, J. W., Jr., Design and Analysis of Composite Wraps for Concrete Columns, U. S. Army Research Laboratory Report, ARL-TR-794, June, 1995.
108. Wu, W., "Thermomechanical Properties of Fiber Reinforced Plastics (FRP) Bars," Dissertation, College of Engineering, West Virginia University, Morgantown, WV, 1990.
109. Bank, L. C., Xi, Z., and Mosallam, A. S., "Experimental Study of FRP Grating Reinforced Concrete Slabs," Advanced Composites Materials in Civil Engineering Structures, S. L. Iyer and R. Sen Eds., American Society of Civil Engineers, 1991, pp. 111-122.
110. Ahmad, S. H., Khaloo, A. R., and Irshaid, A., "Behavior of Concrete Spirally Confined by Fibreglass Filaments," Magazine of Concrete Research, Vol. 43, No. 156, 1991, pp. 143-148.
111. Nanni, A. and Bradford, N. M., "FRP Jacketed Concrete Under Uniaxial Compression," Construction and Building Materials, Vol. 9, No. 2, 1995, pp. 115-124.
112. Antoon, M. K. and Koening, J. L., "The Structural and Moisture Stability of the Matrix Phase in Glass-Reinforced Epoxy Composites," Journal of Macromolecular Science - Review Marcromolecular Chemistry, Vol. C19, No. 1, 1980, pp. 135-173.
113. Parvatareddy, H., Wang, J. Z., Dillard, D. A., Ward, T. C., and Rogalski, M. E., "Environmental Aging of High-Performance Polymeric Composites: Effects on Durability," Composites Science and Technology, Vol. 53, 1995, pp. 399-409.
114. Tsotsis, T. K., "Thermo-Oxidative Aging of Composite Materials," Journal of Composite Materials, Vol. 29, No.3, 1995, pp. 410-422.
115. Bott, T. R. and Barker, A. J., "The Behaviour of Model Composites in Contact with Different Environments," Transactions of the Institute of Chemical Engineers, Vol. 47, 1969, pp. T188-T193.
116. Weitsman, Y. J., Effects of Fluids on Polymeric Composites - A Review, Contract Report for Office of Naval Research, No. N00014-90-J-1556, July, 1995.
117. Hartley, G. S. and Crank, J., "Some Fundamental Definitions and Concepts in Diffusion Processes," Transactions of the Faraday Society, Vol. 45, 1949, pp. 801-818.
118. Fujita, H., "Diffusion in Polymer-Diluent Systems," Fortschr. Hochpolym.-Forsch., Bd. 3, 1961, pp. 1-47.
119. Weitsman, Y., "A Continuum Diffusion Model for Viscoelastic Materials," Journal of Physical Chemistry, Vol. 94, 1990, pp. 961-968.
120. Weitsman, Y. "Stress Assisted Diffusion in Elastic and Viscoelastic Materials," Journal of Mechanics and Physics of Solids, Vol. 35, No. 1, 1987, pp. 73-93.
121. Shen, C. and Springer, G. S., in Environmental Effects on Composite Materials, Vol. 1, G. S. Springer Ed., Technomic Publishing Inc., Westport, CT, 1981, pp. 15-33.
122. Loos, A. C. and Springer, G. S., in Environmental Effects on Composite Materials, Vol.1, G. S. Springer Ed., Technomic Publishing, Westport, CT, 1981, pp. 34-62.
123. Environmental Effects on Composite Materials, Vol.1, G. S. Springer Ed., Technomic Publishing, Westport, CT, 1981.
124. Gillat, O., and Broutman, L. J., "Effect of an External Stress on Moisture Diffusion and Degradation in a Graphite-Reinforced Epoxy Laminate," Advanced Composite Materials - Environmental Effects, ASTM STP 658, J. R. Vinson Ed., American Society for Testing and Materials, 1978, pp. 61-83.
125. Lagrange, A., Melennec, Ch., and Jacquemet, R., " Influence of Various Stress Conditions of the Moisture Diffusion of Composite in Distilled Water and in Natural Sea-Water," in Durability of Polymer Based Composite Systems for Structural Applications, A. H. Cardon and G. Verchery Eds., Elsevier Applied Science, 1991, pp. 385-392.
126. Pritchard, G. and Taneja, N., "Water Damage in Polyester/Glass Laminates. Part II: Microscopic Evidence," Composites, Vol. 4, September, 1973, pp. 199-202.
127. Tucker, W. C., "Degradation of Graphite/Polymer Composites in Seawater," Composite Material Technology 1990, D. Hui and T. J. Kozik Eds., The American Society of Mechanical Engineers, 1990, pp. 95-99.
128. Pollard, A., Baggott, R., Wostenholm, G. H., Yates, B., and George, A. P., "Influence of Hydrostatic Pressure on the Moisture Absorption of Glass Fibre-Reinforced Polyester," Journal of Materials Science, Vol. 24, 1989, pp. 1665-1669.
129. Avena, A., and Bunsell, A. R., "Effect of Hydrostatic Pressure on the Water Absorption of Glass Fibre-Reinforced Epoxy Resin," Composites, Vol. 19, No. 5, September, 1988, pp. 355-357.
130. Wright, W. W., "The Effect of Diffusion of Water into Epoxy Resins and Their Carbon-Fibre Reinforced Composites," Composites, July, 1981, pp. 201-205.
131. Bonniau, P. and Bunsell, A. R., "Water Absorption by Glass Fibre Reinforced Epoxy Resin," Composite Structures, Vol. 1, I. H. Marshall Ed., 1981, pp. 92-104.
132. Krolikowski, W., "Stress-Strain Characteristics of Glass Fiber Reinforced Polyester," SPE Journal, September, 1964, pp. 1031-1035.
133. Apicella, A., Migliaresi, C., Nicolais, L., Iaccarino, L., and Roccotelli, S., "Water Sorption and Mechanical Properties of a Glass-Reinforced Polyester Resin," Composites, October, 1982, pp. 406-410.
134. Apicella, A., Migliaresi, C., Nicolais, L., Iaccarino, L., and Roccotelli, S., "The Water Aging of Unsaturated Polyester-Based Composites: Influence of Resin Chemical Structure," Composites, October, 1983, pp. 387-392.
135. Ishai, O., "Environmental Effects on Deformation, Strength, and Degradation of Unidirectional Glass-Fiber Reinforced Plastics. I. Survey," Polymer Engineering and Science, July, 1975, Vol. 15, No. 17, pp. 491-499.
136. Ishai, O., "Environmental Effects on Deformation, Strength, and Degradation of Unidirectional Glass-Fiber Reinforced Plastics. II. Experimental Study," Polymer Engineering and Science, July, 1975, Vol. 15, No. 17, pp. 486-490.
137. Schutte, C. L., "Environmental Durability of Glass-Fiber Composites," Materials Science and Engineering, R13, No. 7, November 15, 1994, pp. 256-323.
138. Gaur, U., Chou, C. T., and Miller, B., "Effect of Hydrothermal Aging on Bond Strength," Composites, Vol. 35, No. 7, 1994, pp. 609-612.
139. Wagner, H. D. and Lustiger, A., "Effect of Water on the Mechanical Adhesion of the Glass/Epoxy Interface," Composites, No. 7, 1994, pp. 613-616.
140. Xu, Z. R. and Ashbee, K. H. G., "Photoelastic Study of the Durability of Interfacial Bonding of Carbon Fibre-Epoxy Resin Composites," Journal of Materials Science, Vol. 29, 1994, pp. 394-403.
141. Morri, T., Tanimoto, T., Maekawa, Z., Hamada, H., and Kiyosumi, K., "Effect of Surface Treatment on Degradation Behavior of GFRP in Hot Water," in Durability of Polymer Based Composite Systems for Structural Applications, A. H. Cardon and G. Verchery Eds., Elsevier Applied Science, 1991.
142. Martin, J. R. and Gardener, R. J., "Effect of Long Term Humid Aging on Plastics," Polymer Engineering and Science, Vol. 21, No. 9, June, 1981, pp. 557-565.
143. Ishai, O., Garg, A., and Nelson, H. G., "Hygrothermal Effects on the Mechanical Behaviour of Graphite Fibre-Reinforced Epoxy Laminates Beyond Initial Failure," Composites, Vol. 17, No. 1, January, 1986, pp. 23-32.
144. Collings, T. A. and Stone, D. E. W., "Hygrothermal Effects in CFRP Laminates: Strains Induced by Temperature and Moisture," Composites, Vol. 16, No. 4, October, 1985, pp. 307-316.
145. Collings, T. A., "The Use of Resin Hybrids to Control Moisture Absorption in Fibre-Reinforced Plastics," Composites, Vol. 22, No. 5, September, 1991, pp. 369-372.
146. Atkinson, H. E., "Engineering Basis for RP Chemical-Resistant Tanks," Modern Plastics, June, 1969, pp. 108-123.
147. Bhatnagar, A. and Lakkad, S. C., "Temperature and Orientation Dependence of the Strength and Moduli of Glass Reinforced Plastics," Fibre Science and Technology, Vol. 14, 1981, pp. 213-219.
148. Dewimille, B. and Bunsell, A. R., " Accelerated Aging of a Glass Fibre-Reinforced Epoxy Resin in Water," Composites, January 1983, pp. 35-40.
149. Joshi, OM. K., "The Effect of Moisture on the Shear Properties of Carbon Fibre Composites," Composites, Vol. 14, No. 3, July, 1983, pp. 196-200.
150. Environmental Effects on Composite Materials, Vol.2, G. S. Springer Ed., Technomic Publishing, Westport, CT, 1984.
151. Heebink, B. G. and Stevens, Gordon, "How Storage Conditions of Glass Fabric Affects Strength of Reinforced Laminates," SPE Journal, January, 1960, pp. 39-45.
152. Bishop, S. M., "Effect of Moisture on the Notch Sensitivity of Carbon Fibre Composites," Composites, Vol. 14, No. 3, July, 1983, pp. 201-205.
153. Myhre, S. H., Labor, J. D., and Aker, S. C., "Moisture Problems in Advanced Composite Structural Repair," Composites, July, 1982, pp. 289-296.
154. Kasturiarachchi, K. A. and Prichard, G., "Water Absorption of Glass/Epoxy Laminates Under Bending Stresses," Composites, Vol. 14, No. 3, July, 1983, pp. 244-250.
155. Potter, R. T. and Purslow, D., "The Environmental Degradation of Notched CFRP in Compression," Composites, Vol. 14, No.3, July, 1983, pp. 206-225.
156. Rege, S. K. and Lakkad, S. C., "Effect of Salt water on Fibre Reinforced Plastics," Fibre Science and Technology, Vol. 19, 1983, pp. 317-324.
157. Garg, A. C. and Pawar, S. K., "Environmental Effect on Fracture Behavior of Glass Fibre Reinforced Polyester," Fibre Science and Technology, Vol. 17, 1982, pp. 133-139.
158. Lou, A. Y. and Murtha, T. P., "Environmental Effects on Glass Fiber Reinforced PPS Stampable Composites," Journal of Composite Materials, Vol. 21, October, 1987, pp. 910-924.
159. Romanenkov, I. G., "Dependence of the Mechanical Properties of GRPs on Their Water Absorption," Soviet Plastics, No. 2, 1967, pp. 74-75.
160. Grami, M. E., Moilanen, M. J., and Rosenow, M. W. K., "Environmental Degradation of Glass Fibers in Polyurethane Matrix Composites," Proceedings of the 10th International Conference on Composite Materials (ICCM/10), Vol. VI, Whistler, B. C., Canada, August, 1995, pp. 207-214.
161. Soutis, C. and Turkmen, D., "Hygrothermal Effects on the Compressive Strength of T800/924 CFRP Laminates," Proceedings of ICCM-10,Vol. VI, Whistler, B. C., Canada, August, 1995, pp. 231-238.
162. Johnson, A. F., "Comparison of the Mechanical Properties of SMC with Laminated GRP Materials," Composites, Vol. 17, No. 3, July, 1986, pp. 233-239.
163. Hong, G., Yalizis, A., and Frantziskonis, G. N., "Hygrothermal Degradation in Glass/ Epoxy - Evaluation Via Stress Wave Factors," Composite Structures, Vol. 30, 1995, pp. 407-417.
164. Ono, S., Tsuda, K., Kubouchi, M., Nishiyama, T., and Hojo, H., "Degradation Behavior of Amine Cured Epoxy Resin and FRP in Acid Solutions," Proceedings of the 10th International Conference on Composite Materials (ICCM/10), Vol. VI, Whistler, B. C., Canada, August, 1995, pp. 215-222.
165. Carlsson, L. A., and Pomies, F., "Influence of Seawater on Transverse Tensile Properties of PMC," Composite Materials for Offshore Operations: Proceedings of the First International Workshop, National Institute of Standards and Technology Special Publication No. 887, S. S. Wang and D. W. Fitting Eds., August, 1995, pp. 203-211.
166. Grant, T. S. and Bradley, W. L., "InSitu Observation in SEM of Degradation of Graphite/Epoxy Composite Materials Due to Seawater Immersion," Journal of Composite Materials, Vol. 29, No. 7, 1995, pp. 852-867.
167. Isham, A. B., "The Influence of Chemical Exposure and Temperature on the Design Properties of Reinforced Plastic Chemical Storage Tanks," Proceedings of the 22nd SPIRP Conference, 1967, Section 16-E.
168. McCormick, F. C., "Moisture Effects Upon the Dimensional Stability of an S-Glass/Epoxy Composite," Polymer Engineering and Science, Vol. 19, No. 5, April, 1979, pp. 359-364.
169. Garg, A. C. and Paliwal, V., "Effect of Water on the Fracture Behavior of Glass Fibre Reinforced Polyester," Fibre Science and Technology, Vol. 17, 1982, pp. 63-69.
170. Han, K. S. and Koutsky, J., "Effect of Water on the Interlaminar Fracture Behavior of Glass Fibre-Reinforced Polyester Composite," Composites, January, 1983, pp. 67-70.
171. Sekine, H., Shimomura, K., and Hamana, N., "Strength Deterioration and Degradation Mechanism of Glass Chopped Reinforced Plastics in Water Environment," ISME International Journal, Series I, Vol. 31,No. 3, 1988, pp. 619-626.
172. Ferry, J. D. Viscoelastic Properties of Polymers, John Wiley & Sons, Inc., New York, New York, 1961.
173. Chambers, R. E. and Mosallam, A. S., "Design Basis for Creep in Composite Structures," Infrastructure: New Materials and Methods of Repair, Proceedings of the 3rd Materials Engineering Conference, K. D. Basham Ed., San Diego, CA, November 13-16, 1994, pp. 265-271.
174. Scott, D. W., Lai, J. S., and Zureick, A. H., "Creep Behavior of Fiber-Reinforced Polymeric Composites: A Review of the Technical Literature," Journal of Reinforced Plastics and Composites, Vol. 14, June, 1995, pp. 588-616.
175. Bhatnagar, A., Lakkad, S. C., and Ramesh, C. K., "Creep in High Glass Content Unidirectional and Bidirectional GRP Laminated," Fibre Science and Technology, Vol. 15, 1981, pp. 13-25.
176. Wang, C. S. and Wang, A. S. D., "Creep Behavior of Glass-Epoxy Composite Laminates Under Hygrothermal Conditions," Proceedings of the Third International Conference on Composite Materials (ICCM/3), A. R. Bunsell, C. Bathias, A. Martrenchar, D. Menkes, and G. Verchery, Eds., Vol. 1, August, 1980, pp. 569-583.
177. Findley, W. N., "Mechanism and Mechanics of Creep of Plastics," SPE Journal, January, 1960, pp. 57-65.
178. Weidmann, G. W. and Ogorkiewicz, R. M., "Tensile Creep of a Unidirectional Glass Fibre-Epoxy Laminate," Composites, May, 1974, pp. 117-121.
179. Spence, B. R., "Compressive Viscoelastic Effects (Creep) of a Unidirectional Glass/Epoxy Composite Material," Proceedings of the 35th International SAMPE Symposium, April 2-5, 1990, pp. 1490-1493.
180. Sullivan, J. L., Blais, E. J., and Houston, D., "Physical Aging in the Creep Behavior of Thermosetting and Thermoplastic Composites," Composites Science and Technology, Vol. 47, 1993, pp. 389-404.
181. Dillard, D. A., Straight, M. R., and Brinson, H. F., "The Nonlinear Viscoelastic Characterization of Graphite/Epoxy Composites," Polymer Engineering and Science, January, 1987, Vol. 27, No. 2, pp. 116-123.
182. Dillard, D. A., "Viscoelastic Behavior of Laminated Composite Materials," in Fatigue of Composite Materials, K. L. Reifsnider Ed., Elsevier Science Publishers B.V., New York, 1991, pp. 339-384.
183. Yen, S., Williamson, F. L., "Accelerated Characterization of Creep Response of an Off-Axis Composite Material," Composite Science and Technology, Vol. 38, 1990, pp. 103-119.
184. Augl, J. M. "Nonlinear Creep Effects of Physical Aging, Temperature and Moisture of an Epoxy Resin," Journal of Rheology, Vol. 31, No. 1, 1987, pp. 1-36.
185. Bank, L. C. and Mosallam, A. S., "Creep and Failure of a Full-Size Fiber Reinforced Plastic Pultruded Frame," Composite Material Technology, D. Hui and T. J. Kozik Eds., The American Society of Mechanical Engineers, 1990, pp. 49-56.
186. Findley, W. N., "26-Year Creep and Recovery of Poly(Vinyl Chloride) and Polyethylene," Polymer Engineering and Science, April, 1987, Vol. 27, No. 8, pp. 582-585.
187. Maksimov, R. D., Mochalov, V. P., and Urzhumtsev, Yu. S. "Time-Moisture Superposition," Mekhanika Polimerov, No. 5, September-October, 1972, pp. 780-786.
188. Maksimov, R. D., Sokolov, E. A., and Mochalov, V. P., "Effect of Temperature and Moisture on the Creep of Polymeric Materials 1. One-Dimensional Extension Under Stationary Temperature-Moisture Conditions," Mekhanika Polimerov, No. 3, MayJune, 1975, pp. 393-399.
189. Maksimov, R. D., Sokolov, E. A., and Mochalov, V. P., "Effect of Temperature and Moisture on the Creep of Polymeric Materials 2. Uniaxial Elongation Under Variable Temperature-Humidity Conditions," Mekhanika Polimerov, No. 6, November-December, 1975, pp. 976-982.
190. Maksimov, R. D., Sokolov, E. A., and Mochalov, V. P., "Effect of Temperature and Moisture on the Creep of Polymeric Materials 3. Shear, and Shear and Tensile Strain Acting Together," Mekhanika Polimerov, No. 4, July-August, 1976, pp. 627-632.
191. Maksimov, R. D.,Mochalov,V P., and Sokolov, E. A., "Influence of Temperature and Moisture on the Creep of Polymeric Materials 4. Prediction on the Basis of Field Test Results," Mekhanika Polimerov, No. 6, November-December, 1976, pp. 982-987.
192. Maksimov, R. D., and Urzhumtsev, Yu. S. "Prediction of the Long-Term Durability of Polymer Materials. A Review," Mekhanika Polimerov, No. 4, July, 1977, pp. 631-664.
193. Koltunov, M. A. and Troyanovskii, I. E., "Method of Elastic Solutions of Problems of Thermoviscoelasticity," Mekhanika Polimerov, No. 4, July-August, 1970, pp. 603-614.
194. Morland, L. W. and Lee, E. H., "Stress Analysis for Linear Viscoelastic Materials with Temperature Variation," Transactions of the Society of Rheology, Vol. IV, 1960, pp. 233-263.
195. Lee, E. H. and Rogers, T. G., "Solution of Viscoelastic Stress Analysis Prob-lems Using Measured Creep or Relaxation Functions," Journal of Applied Mechanics, March, 1963, pp. 127-133.
196. Tricomi, F. G., Integral Equations, Interscience Publishers, Inc., New York, 1957.
197. Schapery, R. A., "On the Characterization of Nonlinear Viscoelastic Materials," Polymer Engineering and Science, July, 1969, Vol. 9, No. 4, pp. 295-310.
198. Lou, Y. C. and Schapery, R. A., "Viscoelastic Characterization of a Nonlinear Fiber-Reinforced Plastic," Journal of Composite Materials, Vol. 5, 1971, pp. 208-234.
199. Findley, W. N. and Lai, J. S. Y, "A Modified Superposition Principle Applied to Creep of Nonlinear Viscoelastic Material Under Abrupt Changes in State of Combined Stress," Transactions of the Society of Rheology, Vol. 11, No. 3, 1967, pp. 361-380.
200. Weitsman, Y., "Moisture in Composites: Sorption and Damage," in Fatigue of Composite Materials, K. L. Reifsnider Ed., Elsevier Science Publishers B. V., New York, 1991, pp. 385-431.
201. Weitsman, Y., "A Continuum Diffusion Model for Viscoelastic Materials," Journal of Physical Chemistry, Vol. 94, 1990, pp. 961-968.
202. Upadhyay, P. C. and Mishra, A., "Parametric Modeling of Moisture Assisted Creep in Polymeric Composites," Journal of Reinforced Plastics and Composites, Vol. 13,-December, 1994, pp. 1056-1070.
203. Panasyuk, V. E., Delyavskii, M. V., and Berezhnitskii, L. T., "Creep of Unidirectional Glass-Reinforced Plastics Under the Effect of Liquid Media and Elevated Temperatures," Mekhanika Kompozitnykh Materialov, No. 5, September-October, 1987, pp. 910-914.
204. Cessna, L. C., Jr., "Stress-Time Superposition of Creep Data for Polypropylene and Coupled Glass-Reinforced Polypropylene," Polymer Engineering and Science, May, 1971, Vol. 11, No. 3, pp. 211-219.
205. Howard, C. M. and Hollway, L., "The Characterization of the Non-linear Viscoelastic Properties of a Randomly Oriented Fibre/Matrix Composite," Composites, September, 1987, pp. 317-323.
206. Zhang, S. and Zhao, B., "Creep Behavior of Woven Roving GRP Beam in Three-Point Bending," Composite Structures, Vol. 13, 1989, pp. 217-234.
207. Levy, A. R. and Murray, P. J., "Creep Response of Pultruded FRP Materials," Proceedings of the Society of Plastics Engineers 51st Technical Conference, New Orleans, LO 1993, pp. 2720-2723.
208. Chapskii, K. A., "Creep of Certain Types of Glass-Reinforced Plastics (GRP) in Bending," Mekhanika Polimerov, Vol. 1, No. 4, 1965, pp. 67-75.
209. Thomas, D. A., "Uniaxial Compressive Creep of Polytetrafluorethylene," Polymer Engineering and Science, November, 1969, Vol. 9, No. 6, pp. 415-422.
210. Irion, M. N. and Adams, D. F., "Compression Creep Testing of Unidirectional Composite Materials," Composites, April, 1981, pp. 117-123.
211. Veazie, D. R. and Gates, T. S., "Compressive Creep of IM7/K3B Composite and the Effects of Physical Aging on Viscoelastic Behavior," Proceedings of the Spring Conference of the Society for Experimental Mechanics, 1995, pp. 491-498.
212. Mochalov, V. P., Aniskevich, N. I., and Maksimov, R. D., "Creep of Polyester Resin PN-3 Under Moisture-Absorption Conditions," Mekhanika Polimerov, No. 4, July-August, 1972, pp. 579-584.
213. Greenwood, J. H., " Creep and Fracture of CFRP at 180-200 CC," Composites, September, 1975, pp. 203-206.
214. Yeow, Y. T., Morris, D. H., and Brinson, H. F., "Time-Temperature Behavior of a Unidirectional Graphite/Epoxy Composite," Composite Materials: Testing and Design (Fifth Conference), ASTM STP 674, S. W. Tsai Ed., American Society for Testing and Materials, 1979, pp. 263-281.
215. Crossman, F. W., Mauri, R. E., and Warren, W. J., "Moisture-Altered Viscoelastic Response of Graphite/Epoxy Composites," Advanced Composite Materials - Environmental Effects, ASTM STP 658, J. R. Vinson, Ed., American Society for Testing and Materials, 1978, pp. 205-220.
216. Struik, L. C. E., "Physical Aging in Plastics and Other Glassy Materials," Polymer Engineering and Science, March 1977, Vol. 17, No. 3, pp. 165-173.
217. Janas, V. F. and McCullough, R. L., "The Effects of Physical Aging on the Viscoelastic Behavior of a Thermoset Polyester," Composite Science and Technology, Vol. 30, 1987, pp. 99-118.
218. Pasricha, A., Dillard, D. A., and Tuttle, M. E., "Physical Aging Effects on Polymeric Composites Subjected to Variable Stress History," Proceedings of the Society for Experimental Mechanics Spring Conference, 1995, pp. 386-394.
219. Wang, J. Z., Parvatareddy, H., Chang, T., Iyenger, N., Dillard, D. A., and Reifsnider, K. L., "Physical Aging Behavior of High-Performance Composites," Composites Science and Technology, Vol. 54, 1995, pp. 405-414.
220. Sullivan, J. L., "Creep and Physical Aging of Composites," Composites Science and Technology, Vol. 39, 1990, pp. 207-232.
221. Martirosyan, M. M., "Effect of Aging on Creep of SVAM Glass-Reinforced Plastics in Tension with Allowance for the Orientation of the Fibers," Mekhanika Polimerov, Vol. 1, No. 6, 1965, pp. 20-29.
222. Regel, V. R., Chernyi, N. N., Kryzhanovskii, V. G., and Boboev, T. B., " Effect of Ultraviolet Radiation on the Creep Rate of Polymers," Mekhanika Polimerov, Vol. 3, No. 4, pp. 615-618, 1967.
223. Regel, V. R., Chernyi, N. N., and Boboev, T. B., "The Effect of Ultraviolet Radiation on the Stress Relaxation Rate of Polymers," Mekhanika Polimerov, Vol. 3, No. 4, pp. 615-618, 1967.
224. Mosallam, A. S., Bank, L. C., "Creep and Recovery of a Pultruded FRP Frame," Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer and R. Sen Eds., American Society of Civil Engineers, 1991, pp. 24-35.
225. Mottram, J. T., "Short- and Long-Term Structural Properties of Pultruded Beam Assemblies Fabricated Using Adhesive Bonding," Composite Structures, Vol. 25, 1993, pp. 387-395.
226. Holmes, M. and Rahman, T. A., "Creep Behaviour of Glass Reinforced Plastic Box Beams," Composites, April, 1980, pp. 79-85.
227. Deskovic, N., Meier, U., and Triantafillou, T. C., "Innovative Design of FRP Combined with Concrete: Long-Term Behavior," Journal of Structural Engineering, July, 1995, pp. 1079-1089.
228. McCormick, F. C., Field Study of a Pedestrian Bridge of Reinforced Plastic, Virginia Highway and Transportation Research Council, VHTRC 86-R21, December, 1985.
229. McCormick, F. C., Fatigue Study of a GRP Pedestrian Bridge, Virginia Highway and Transportation Research Council, VHTRC 87-R7, December, 1986.
230. Budelmann, H. and Rostasy, F. S., "Creep Rupture Behavior of FRP Elements for Prepressed Concrete - Phenomenon, Results and Forecast Models," Proceedings of International Symposium on Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, A. Nanni and C. W. Dolan Eds., American Concrete Institute, SP-138, 1994, pp. 87-100.
231. Agarwal, B. D. and Broutman I.J., in Analysis and Performance of Fiber Composites, John Wiley & Sons, New York, 1980, pp. 223-287.
232. Hogg, P. J. and Hull, D., "Corrosion and Environmental Deterioration of GRP," in Developments in GRP Technology-1, B. Harris Ed., Applied Science Publishers, New York, 1983, pp. 37-90.
233. Price, J. N., "Stress Corrosion Cracking in Glass Reinforced Composites," Fractography and Failure Mechanisms of Polymers and Composites, A. C. Roulin-Moloney Ed., Elsevier Applied Science, New York, 1989, pp. 495-531.
234. Bascom, W. D., "The Surface Chemistry of Moisture-Induced Composite Failure," Interfaces in Polymer Matrix Composites, E. P. Plueddemann Ed., Academic Press, New York, 1974, pp. 79-108.
235. Charles, R. J., "Static Fatigue of Glass, I," Journal of Applied Physics, Vol. 29, No. II, November, 1958, pp. 1549-1553.
236. Charles, R. J., "Static Fatigue of Glass, II," Journal of Applied Physics, Vol. 29, No. 11, November, 1958, pp. 1554-1560.
237. Schmitz, G. K. and Metcalfe, A. G., "Stress Corrosion of E-Glass Fibers," I&EC Product Research and Development, Vol. 5, No. 1, March 1966, pp. 1-8.
238. Metcalfe, A. G. and Schmitz, G. K., "Mechanism of Stress Corrosion in E-Glass Filaments," Glass Technology, Vol. 13, No. 1, February, 1972, pp. 5-16.
239. Metcalfe, A. G., Gulden, M. E., and Schmitz, G. K., "Spontaneous Cracking of Glass Filaments," Glass Technology, Vol. 12, No. 1, February, 1972, pp. 15-23.
240. Aveston, J. and Sillwood, J. M., "LongTerm Strength of Glass-Reinforced Plastics in Dilute Sulphuic Acid," Journal of Materials Science, Vol. 17, 1982, pp. 3491-3498.
241. Wojnarovits, I., "Behavior of Glass Fibers in Strong Acidic and Alkaline Media," Journal of the American Ceramic Society, Vol. 66, No. 12, December, 1983, pp. 896-898.
242. White, R. J. and Philips, M. G., "Environmental Stress-Rupture Mechanisms in Glass Fiber/Polyester Laminates," Proceedings of the 5th International Conference on Composite Material (ICCM/5), 1985, pp. 1089-1099.
243. Hojo, H. and Tsuda, K., "Effects of Chemical Environments and Stress on Corrosion Behaviors of Glass Fiber Reinforced Plastics and Vinyl Ester Resin," Proceedings of the 34th Annual Technical Conference of SPI, 1979, section 13-B.
244. Ehrenstein, G. W. and Spaude, R., "A Study of the Corrosion Resistance of Glass Fibre Reinforced Polymers," Composite Structures, Vol. 2, 1984, pp. 191-200.
245. Matzeg, R. and Santrach, D., "Effects of Glass Fiber Type on Corrosion Resistance of FRP Laminates," SAMPE Quarterly, October, 1991, pp. 12-19.
246. Hogg, P. J., "Factors Affecting the Stress Corrosion of GRP in Acid Environments," Composites, Vol. 14, No. 3, July 1983, pp. 254-261.
247. van den Ende, C. A. M., and ven den Dolder, A., " Comparison of Environmental Stress Corrosion Cracking in Different Glass Fiber Reinforced Thermoset Composites," in Durability of Polymer Based Composite Systems for Structural Applications, A. H. Cardon and G. Verchery Eds., Elsevier Applied Science, 1991, pp. 408-417.
248. Hogg, P. J. and Hull, D.,"Micromechanisms of Crack Growth in Composite Materials under Corrosive Environments," Metal Science, August-September, 1980, pp. 441-449.
249. Ghosh, P. and Bose, N. R., "Comparative Evaluation of N-Glass and E-Glass Fibres with Special Reference to Their Use in FRP Composites," Journal of Materials Science, Vol. 26, 1991, pp. 4759-4764.
250. Farquhar, D. S., Mutrelle, F. M., Phoenix, S. L., "Lifetime Statistics for Single Graphite Fibres in Creep Rupture," Journal of Materials Science Letters, Vol. 24, 1989, pp. 2151-2164.
251. Chiao, T. T., Lepper, J. K., Heterhington, N. W., and Moore, R. L., Journal of Composite Materials, Vol. 6, 1972, pp. 358-370.
252. Hart, G. L. and Pritchard, G., "Mechanisms of Corrosion in Carbon Fibre-Reinforced Phenolic Resins," in Developments in Composite Materials, Vol.1, G. S. Holister Ed., Applied Science Publishers Ltd, London, 1977, pp. 1-15.
253. Friedrich, K., "Stress Corrosion Crack Propagation in Glass Fibre Reinforced/ Thermoplastic PET," Journal of Materials Science, Vol. 16, 1981, pp. 3292-3302.
254. Collins, H. H., "Strain-Corrosion Cracking of GRP Laminates," Plastics and Ruber:Materials and Applications, February, 1978, pp. 6-10.
255. Fujii, Y., Maekawa, Z., Hamada, H., Kubota, T., Murakami, A., and Yoshiki, T., "Evaluation of Initial Damage and Stress Corrosion of GFRP," Proceedings of the 9th International Conference on Composite Materials (ICCM/9), Madrid, Spain, July 12-16, 1993, pp. 562-568.
256. Jones, F. R., Rock, J. W., and Wheatley, A. R., "The Long Term Durability of Stressed GRP in Acidic Environments," Journal of Material Science Letters, Vol. 2, 1983, pp. 519-521.
257. Jones, F. R., Rock, J. W., and Wheatley, A. R., "Stress Corrosion Cracking and Its Implications for the Long-Term Durability of E-Glass Fibre Composites," Composites, Vol. 14, No. 3, July, 1983, pp. 262-269.
258. Menges, G. and Lutterbeck, K., "Stress Corrosion in Fibre-Reinforced Plastics in Aqueous Media," in Developments in Reinforced Plastics, Vol. 3, G. Pritchard Ed., Elsevier Applied Science, 1984, pp. 97-122.
259. Tsai, S. W., in Mechanics of Composite Materials, F.W. Wendt, H. Liebowitz, and N. Perrone, Eds., Pergamon, Oxford, 1970, p. 749.
260. Hogg, P. J., Hull, D., and Spencer, B., "Stress and Strain Corrosion of Glass Reinforced Plastics," Composites, July 1981, pp. 166-172.
261. Pritchard, G. and Speake, S. D., "Effects of Temperature on Stress-Rupture Times in Glass/Polyester Laminates," Composites, Vol. 19, No. 1, 1988, pp. 29-35.
262. Mandell, J. F., "Origin of Moisture Effects on Crack Propagation in Composites," Polymer Engineering and Science, Vol. 19, No. 5, April, 1979, pp. 353-358.
263. Plueddemann, E. P., Silane Coupling Agents, 2nd Ed., Plenum Press, New York, NY, 1991.
264. Ashbee, K. H. G., Frank, F. C., and Wyatt, R. C., "Water Damage in Polymer Resins," Proceedings of the Royal Society, A. 300, 1967, pp. 415-419.
265. Ashbee, K. H. G. and Wyatt, R. C., "Water Damage in Glass Fibre/Resin Composites," Proceedings of the Royal Society, A. 312, 1969, pp. 553-564.
266. Jones, F. R., Rock, J. W., and Bailey, J. E., "The Environmental Stress Corrosion Cracking of Glass Fibre-Reinforced Laminates and Single E-Glass Filaments," Journal of Materials Science, Vol. 18, 1983, pp. 1059-1071.
267. Diggwa, A. D. S., and Norman, R. H., Mechanism of Creep of GRP, 2, Microfailures, RAPRA Report No. 194.
268. Chateauminois, A., Chabert, B., Soulier, J. P., and Vincent, L., "Effects of Hygrothermal Aging on the Durability of Glass/Epoxy Composites. Physico-Chemical Analysis and Damage Mapping in Static Fatigue," Proceedings of the 9th International Conference on Composite Materials (ICCM/9), 1993, pp. 593-600.
269. Chateauminois, A., Chabert, B., Soulier, J. P., and Vincent, L., "Hygrothermal Aging Effects on the Static Fatigue of Glass/Epoxy Composites," Composites, Vol. 24, No. 7, 1993, pp. 547-554.
270. Hahn, H. T. and Chiao, T. T., "Long-Term Behavior of Composite Materials," Proceedings of the 3rd International Conference on Composite Materials (ICCM/3), Vol. 1, 26-29, August, 1980, Paris, pp. 585-596.
271. Thomas, D. A., "Long-Life Assessment of Graphite/Epoxy Materials for Space Station Freedom Pressure Vessels," Journal of Propulsion, Vol. 8, No. 1, Janurary-February, 1992, pp. 87-92.
272. French, M. A and Prichard, G., "Environmental Stress Corrosion of Hybrid Fibre Composites," Composite Science and Technology, Vol. 45, 1992, pp. 257-263.
273. Prichard, G. and French, M. A, "The Fracture Surface of Hybrid Fibre Composites," Composite Science and Technology, Vol. 47, 1993, pp. 217-223.
274. Bailey, J. E., Fryer, T. M. W., and Jones, F. N., in Advances in Composite Materials, Vol. 1, A. R. Bunsell et al Eds., Pergamon Press, Oxford, 1980, pp. 556-566.
275. Roberts, R. C., " Environmental Stress Cracking of GRP: Implications for Reinforced Plastics Process Equipment," Composites, October, 1982, pp. 389-392.
276. Sloan, F. E. and Seymour, R. J., "Environmental Testing Using a Compliant Load-Frame," Journal of Composite Materials, Vol. 24, July, 1990, pp. 727-738.
277. Phillips, M. G., "Prediction of LongTerm Stress-Rupture Life for Glass Fiber-Reinforced Polyester Composites in Air and in Aqueous Environment," Composites, July 1983, pp. 271-275.
278. Lyons, K. B. and Philips, M. G., "Creep-Rupture and Damage Mechanisms in Glass-Reinforced Plastics," Composites, October, 1981, pp. 265-271.
279. Zhurkov, S. N., "Kinetic Concept of the Strength of Solids," International Journal of Fracture Mechanics, Vol. 1, 1965, pp. 311-323.
280. Regel, V. R., Savitskii, A. V., and Sanfirova, T. P., "Temperature-Force Dependence of Lifetime of Composites," Mekhanika Polimerov, No. 6, November-December, 1976, pp. 1002-1009.
281. Smotrin, N.T. and Chebanov, V. M., "Long-Term Strength of Type SVAM(5:1)-B Laminate in Various Directions in the Sheet Plane," Mekhanika Polimerov, Vol. 2, No. 6, 1966, pp. 833-836.
282. Rosen, B.W., AIAA Journal, 1964, pp. 1985-1992.
283. Lifshitz, J. M., "Time-Dependent Fracture of Fibrous Composites," in Composite Materials Fracture and Fatigue, L. J. Broutman Ed., Academic Press, New York, 1974, pp. 249-311.
284. Slattery, K. T., "Mechanistic Model of the Creep-Rupture Process in Filamentary Composites," Infrastructure: New Materials and Method for Repair, Proceedings of the 3rd Materials Engineering Conference, San Diego, CA, November 13-16, 1994, pp. 215-222.
285. Slattery, K. T., "Computational Simulation of the Creep-Rupture Process in Filamentary Composite Materials," Journal of Reinforced Plastics and Composites, Vol. 10, March, 1991, pp. 184-197.
286. Schonhorn, H., Wang, T. T., Vazirani, H. N., and Frisch, H. L., "Static and Dynamic Fatigue of High-Strength Glass Fibers Coated with a UV-Curable Epoxy-Acrylate," Journal of Applied Physics, Vol. 49, No. 9, September, 1978, pp. 4783-4787.
287. Kelly, A., McCartney, L. N. M., "Failure by Stress Corrosion of Bundles of Fibres," Proceeding of the Royal Society of London, Vol. A 374, 1981, pp. 475-489.
288. Franke, L. and Meyer, H. J., "Predicting the Tensile Strength and Creep-Rupture Behaviour of Pultruded Glass-Reinforced Polymer Rods," Journal of Materials Science, Vol. 27, 1992, pp. 4899-4980.
289. Glaser, R. E., Moore, R. L., and Chiao, T. T, "Life Estimation of an S-Glass/Epoxy Composite Under Sustained Tensile Loading," Composites Technology Review, Vol. 5, No. 1, Spring 1983, pp. 21-26.
290. Dew-Hughes, D. and Way, J. L., "Fatigue of Fibre-Reinforced Plastics: a Review," Composites, July, 1973, pp. 167-173.
291. Owens, M. J., "Fatigue Damage in Glass-Fiber-Reinforced Plastics," in Composite Materials: Fracture and Fatigue (Vol. 5), L. Broutman, Ed., Academic Press, New York, 1974, pp. 313-341.
292. Harris, B., "Fatigue and Accumulation of Damage in Reinforced Plastics," Composites, October, 1977, pp. 214-220.
293. Stinchcomb, W. W., and Reifsnider, K. L., "Fatigue Damage Mechanisms in Composite Materials: A Review," Fatigue Mechanisms, ASTM STP 675, American Society for Testing and Materials, 1979, pp. 762-787.
294. Konur, O. and Matthews, F. L., "Effect of the Properties of the Constituents on the Fatigue Performance of Composites: a Review," Composites, Vol. 20, No. 4, July, 1989, pp. 317-328.
295. Fatigue of Composite Materials, K. L. Reifsnider ed., Elsevier, New York, New York, 1991.
296. Dharan, C. K. H., "Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material," Fatigue of Composite Materials, ASTM STP 569, American Society for Testing and Materials, 1975, pp.171-188.
297. Dharan, C. K. H., "Fatigue Failure in Graphite Fibre and Glass Fibre-Polymer Composites," Journal of Materials Science, Vol. 10, 1975, pp. 1665-1670.
298. Lorenzo, L. and Hahn, H. T., "Fatigue Failure Mechanisms in Unidirectional Composites," Composite Materials: Fatigue an Fracture, ASTM STP 907, H. T. Hahn Ed., American Society for Testing and Materials, Philadelphia, PA 1986, pp. 210-232.
299. Dally, J. W. and Carrillo, D. H., "Fatigue Behavior of Glass-Fiber Fortified Thermoplastics," Polymer Engineering and Science, November, 1969, Vol. 9, No. 6, pp. 434-444.
300. Mandell, J. F., Huang, D. D., and McGarry, F. J., "Tensile Fatigue Performance of Glass Fiber Dominated Composites," Composites Technology Review, Vol. 3, No. 3, Fall, 1981, pp. 96-102.
301. Mandell, J. F., McGarry, F. J., Hsieh, A. J. Y., and Li, C. G., "Tensile Fatigue of Glass Fibers and Composites with Conventional Surface Compressed Fibers," Polymer Composites, Vol. 6, No. 3, July, 1985, pp. 168-174.
302. Reifsnider, K. L., Schulte, K., and Duke, J. C., "Long-Term Fatigue Behavior of Composite Materials," Long-Term Behavior of Composites, ASTMSTP 813, T. K. O'Brien, Ed., American Society for Testing and Materials, 1983, pp. 136-159.
303. Echtermeyer, A. T., Buene, L., Engh, B., and Sund, O. E., "Significance of Damage Caused by Fatigue on Mechanical Properties of Composite Laminates," Proceedings of the 8th International Conference on Composite Materials (ICCM/8), Honolulu, HI, July, 15-19, 1991, Section 38B.
304. Echtermeyer, A. T., Engh, B., and Buene, L., "Lifetime and Young's Modulus Changes of Glass/Phenolic and Glass/Polyester Composites Under Fatigue," Composites, Vol. 26, No. 1, 1995.
305. Newaz, G. M., "Influence of Matrix Material on Flexural Fatigue Performance of Unidirectional Composites," Composites Science and Technology, Vol. 24, 1985, pp. 199-214.
306. Newaz, G. M., "Fatigue Damage Growth Rate in Unidirectional Composites in Flexural Loading," Journal of Materials Science Letters, Vol. 4, 1985, pp. 197-199.
307. Jessen, S. M. and Plumtree, A., "Fatigue Damage Accumulation in Pultruded Glass/Polyester Rod," Composites, Vol. 20, No. 6, November, 1989, pp. 559-567.
308. Hahn, H. T., "Fatigue Behavior and Life Prediction of Composite Laminates," Composite Materials: Testing and Design (5th Conference), ASTM STP 674, S. W. Tsai, Ed., American Society for Testing and Materials, 1979, pp. 383-417.
309. Nevadunsky, J. J. and Lucas, J. J., "Early Fatigue Damage Detection in Composite Materials," Journal of Composite Materials, Vol. 9, 1975, pp. 394-408.
310. Hahn, H. T. and Kim, R. Y., "Fatigue Behavior of Composite Laminate," Journal of Composite Materials, Vol. 10, 1976, pp. 156-180.
311. Talreja, R., "Fatigue of Composite Materials: Damage Mechanisms and Fatigue-Life Diagrams," Proceeding of the Royal Society of London, A 378, 1981, pp. 461-475.
312. Harris, B., Reiter, H., Adam, T., Dickson, R. F., and Fernando, G., "Fatigue Behaviour of Carbon Fibre Reinforced Plastics," Composites, Vol. 21, No. 3, May, 1990, pp. 232-242.
313. Boller, K. H., "Fatigue Characteristics of RP Laminates Subjected to Axial Loading," Modern Plastics, June, 1964, pp. 145-188.
314. Boller, K. H., "Fatigue Fundamentals for Composite Materials," Composite Materials: Testing and Design, ASTM STP 460, American Society for Testing and Materials, 1969, pp. 217-235.
315. Davis, J. W. and Sundsrud, G. J., "Fatigue Data on a Variety of Nonwoven Glass Composites for Helicopter Rotor Blades," Composite Materials: Testing and Design (Fifth Conference), ASTM STP 674, S. W. Tsai Ed., American Society for Testing and Materials, 1979, pp. 137-148.
316. Donaldson, S. L. and Kim R. Y., "Life Prediction of Glass/Vinlyester and Glass/ Polyester Composites Under Fatigue Loading," Proceedings of the 10th International Conference on Composite Materials (ICCM/ 10), Vol. I, Whistler, B. C., Canada, August, 1995, pp. 577-584.
317. Hofer, K. E., Jr., Benett, L. C., and Stander, M., "Effect of Various Fiber Surface Treatments on the Fatigue Behavior of Glass Fabric Composites in High Humidity Environment," Proceedings of the 31st Annual Technical Conference of SPI, Washington, D. C., February, 1976, Section 6-A.
318. Shih, G. C. and Ebert, L. J., "The Effect of the Fiber/Matrix Interface on the Flexural Fatigue Performance of Unidirectional Fiberglass Composites," Composites Science and Technology, Vol. 28, 1987, pp. 147-161.
319. Bevan, L. G., "Axial and Short Beam Shear Fatigue Properties of CFRP Laminates," Composites, October, 1977, pp. 227-232.
320. Watanabe, M., "Effect of Water Environment on Fatigue Behavior of Fiberglass Reinforced Plastics," Composite Materials: Testing and Design (Fifth Conference), ASTMSTP 674, S. W. Tsai, Ed., American Society for Testing and Materials, 1979, pp. 345-367.
321. Xiao, J. and Bathias, C., "Fatigue Behavior of Unnotched and Notched Woven Glass/Epoxy Laminates," Composites Science and Technology, Vol. 50, 1994, pp. 141-148.
322. Mallkick, P. K., Little, R. E., and Thomas, J., "Fatigue Damage in Notched Pultruded Composite Rods," Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn, Ed., American Society for Testing and Materials, Philadelphia, PA, 1986, pp. 197-209.
323. Fesko, D. G., "Flexural Fatigue of Unidirectional Fiberglass-Reinforced Polyester," Polymer Engineering and Science, Vol. 17, No. 4, April, 1977, pp. 242-245.
324. Sumsion, H. T. and Williams, D. P., "Effects of Environment on the Fatigue of Graphite-Epoxy Composites," Fatigue of Composite Materials, ASTM STP 569, American Society for Testing and Materials, 1975, pp. 226-247.
325. Jones, C. J., Dickson, R. F., Adam, T., Reiter, H., and Harris, B., "Environmental Fatigue of Reinforced Plastics," Composites, Vol. 14, No. 3, July, 1983, pp. 288-293.
326. Jones, C. J., Dickson, R. F., Adam, T., Reiter, H., and Harris, B., "The Environmental Fatigue Behaviour of Reinforced Plastics," Proceeding of the Royal Society of London, A 396, 1984, pp. 315-338.
327. Agarwal, B. D. and Joneja, S. K., "Strain-Controlled Flexural Fatigue of Unidirectional Composites," Composites Technology Review, Vol. 4, No. 1, Spring, 1982, pp. 6-13.
328. Smith, E. W. and Pascoe, K. J., "The Role of Shear Deformation in the Fatigue Failure of a Glass Fibre-Reinforced Composites," Composites, October, 1977, pp. 237-243.
329. Sims, D. F. and Brogdon, V. H., "Fatigue Behavior of Composites Under Different Loading Modes," Fatigue of Filamentary Composite Materials, ASTM STP 636, K. L. Reifsnider and K. N. Lauraitis, Ed., American Society for Testing and Materials, 1977, pp. 185-205.
330. Fried, N., "Degradation of Composite Materials: The Effect of Water on Glass-Reinforced Plastics," Mechanics of Composite Materials, Proceedings of the Fifth Symposium on Naval Structural Mechanics, F. W. Wendt, H. Liebowitz, and N. Perrone Eds., 1967, pp. 813-837.
331. Phillips, D. C. and Scott, J. M., "The Shear Fatigue of Unidirectional Fibre Composites," Composites, October, 1977, pp. 233-236.
332. Han, K. S., "Compressive Fatigue Behaviour of a Glass Fibre-Reinforced Polyester Composite at 300 K and 77 K," Composites, April, 1983, pp. 145-150.
333. Amijima, S. and Tanimoto, T., "The Effect of Glass Content and Environment Temperature on the Fatigue Properties of Laminated Glass Fiber Composite Materials," Mechanical Behavior of Materials, Proceedings of the 1971 International Conference on Mechanical Behavior of Materials, Vol. V, The Society of Materials Science, Japan, 1972, pp. 269-278.
334. Ellyin, F. and Kujawski, D., "Tensile and Fatigue Behaviour of Glassfibre/Epoxy Laminates," Construction and Building Materials, Vol. 9, No. 6, 1995, pp. 425-430.
335. Jessen, S. M. and Plumtree, A. "Continuum Damage Mechanics Applied to Cyclic Behavior of a Glass Fibre Composite Pultrusion," Composites, Vol. 22, No. 3, May, 1991, pp. 181-190.
336. Carswell, W. S. and Roberts, R. C., "Environmental Fatigue Stress Failure Mechanism for Glass Fibre Mat Reinforced Polyester," Composites, April, 1980, pp. 95-99.
337. Vauthier, E., Chateauminois, A., and Bailliez, T., "Hygrothermal Aging and Durability of Unidirectional Glass-Epoxy Composites," Proceedings of the 10th International Conference of Composite Materials (ICCM/10), Vol. VI, August, 1995, pp. 185-192.
338. Hashin, Z. And Rotem, A., "A Fatigue Failure Criterion for Fiber Reinforced Materials," Journal of Composite Materials, Vol. 7, 1973, pp. 448-464.
339. Hofer, K. E., Skaper, G. N., and Bennett, L. C., "Effect of Moisture on Fatigue and Residual Strength Losses for Various Composites," Journal of Reinforced Plastics and Composites, Vol. 6, January 1987, pp. 53-65.
340. Dally, J. W. and Broutman, L. J., "Frequency Effects on the Fatigue of Glass Reinforced Plastics," Journal of Composite Materials, Vol. 1, 1967, pp. 424-442.
341. Mandell, J. F. and Meier, U., "Effects of Stress Ratio, Frequency, an Loading Time on the Tensile Fatigue of Glass-Reinforced Epoxy," Long-Term Behavior of Composites, ASTM STP 813, T. K. O'Brien, Ed., American Society for Testing and Materials, 1983, pp. 55-77.
342. Sun, C. T. and Chan, W. S., "Frequency Effect on the Fatigue Life of a Laminated Composite," Composite Materials: Testing and Design (5th Conference), ASTM STP 674, S. W. Tsai Ed., American Society for Testing and Materials, 1979, pp. 418-430.
343. Bradley, W. L., Chiou, P. B., and Grant, T. S., "The Effect of Sea Water on Polymeric Composite Materials," Composite Materials for Offshore Operations: Proceedings of the First International Workshop, National Institute of Standards and Technology Special Publication 887, S. S. Wang and D. W. Fitting, Eds., August, 1995, pp. 193-202.
344. McConnell, V. P., "Demo Bridge Benchmarks Composites," High-Performance Composites, July/August, 1996, pp. 37-41.
345. Romans, J. B., Sands, A. G., and Cowling, J. E., "Fatigue Behavior of Glass-Filament-Wound Epoxy Composites in Water," Naval Research Laboratory Report 7246, April, 1971.
346. Kosuri, R. and Weitsman, Y., "Sorption Process and Immersed-Fatigue Response of GR/EP Composites in Sea Water," Proceedings of the 10th International Conference on Composite Materials (ICCM/ 10), Vol. VI, Bristler, B. C., Canada, August, 1995, pp. 177-184.
347. Hofer, K. E., Jr., Stander, M., and Bennett, L. C., "Degradation and Enhancement of the Fatigue Behavior of Glass/ Graphite/Epoxy Hybrid Composites After Accelerated Aging," Proceedings of the 32nd Annual Technical Conference, The Society of the Plastics Industries, Inc., 1977, Secion 11-F.
348. Hofer, K. E., Jr., Bennett, L. C., and Stander, M., "Effec of Moisture and Fatigue on the Residual Mechanical Properties of S-Glass/Graphite/Epoxy Hybrid Composites," Fatigue of Filamentary Composite Materials, ASTMSTP 636, K. L. Reifsnider and K. N. Lauraitis, Eds., American Society for Testing and Materials, 1977, pp. 103-122.
349. Liao, K., Altkorn, R. I., Milkovich, S. M., Gomez, J., Schultheisz, C. R., Brinson, L. C., Fildes, J. M., and Hunston, D. L., "Long-Term Durability of Glass-Fiber Reinforced Composites in Infrastructure Applications," Journal of Advanced Materials, April, 1997, pp. 54-63.
350. Liao, K., Schultheisz, C. R., Hunston, D. L., and Brinson, L. C., "Environmental Fatigue of Pultruded Glass-Fiber Reinforced Composites," presented at ASTM 7th Symposium on Composite Materials: Fatigue and Fracture, St. Louis, MO, May 7-8, 1997.
351. Life Prediction Methodologies for Composite Materials, Committee on Life Prediction Methodologies for Composite Materials, National Materials Advisory Board, National Research Council, 1992.
352. Sendeckyj, G. P., "Life Prediction for Resin-Matrix Composite Materials," in Fatigue of Composite Materials, K. L. Reifsnider, Ed., Elsevier, New York, New York, 1991.
353. Reifsnider, K. L. and Stinchcomb, W. W., "A Critical Element Model of the Residual Strength and Life of Fatigue-Loaded Composite Coupons," Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn Ed., 1986, pp. 233-251.
354. Kachanov, L. M., Introduction to Continuum Damage Mechanics, The Hague: Martinus Nijhoff Publishers, 1986.
355. Lemaitre, J., "How to Use Damage Mechanics," Nuclear Engineering and Design, Vol. 80, 1984, pp. 233-245.
356. Lemaitre, J. and Chaboche, J. L., "A Non-Linear Model of Creep-Fatigue Damage Cumulation and Interaction," Mechanics of Visco-Elastic Media and Bodies, J. Huit Ed., Springer-Verlay, 1975.
357. Chorbel, I., Valentin, D., Yriex, M. C., and Grattier, J., "Damage Propagation Law in Glass Fibre Reinforced Polymer Tubes Under Hygrothermal Loading Conditions," in Durability of Polymer Based Composite Systems for Structural Applications, A. H. Cardon and G. Verchery, Eds., Elsevier Applied Science, New York, 1992.
358. Frost, S. R., "Predicting the Long Term Fatigue Behavior of Filament Wound Glass Fibre/Epoxy Matrix Pipes," Proceedings of the 10th International Conference on Composite Materials (ICCM/10), A. Poursartip and K. Street Eds., Whistler, B. C., Canada, August 1995.
359. Beaumont, P. W. R., "The Mechanics of Fatigue Damage in Structural Composite Materials," in Composite Material Technology 1990, D. Hui and T. J. Kozik Eds., American Society of Mechanical Engineers, 1990.
360. Kamal, M. R. and Saxon, R., "Recent Development in the Analysis and Prediction of the Weatherability of Plastics," Applied Polymers Symposia, No. 4, 1967, pp. 1-28.
361. Mark, H. F., "Degradation of Polymers in Hostile Environments," in The Effects of Hostile Environments on Coatings and Plastics, D. P. Garner and G. A. Stahl, Eds., American Chemical Society, Washington, D. C., 1983, pp. 11-15.
362. Handbook of Plastics Testing Technology, V. Shah, Ed., Wiley-Interscience, New York, New York, 1984.
363. White, J. R. and Turnbull, A., "Wheathering of Polymers: Mechanisms of Degradation and Stabilization, Testing Strategies and Modelling," Journal of Materials Science, 1994, pp. 584-613.
364. Scott, K. A. and Paul, K. T, "Weathering Resistance of Plastics Composites," Composites, September 1974, pp. 201-208.
365. Davis, A. and Sims, D., Weathering of Polymers, Applied Science Publishers, New York, New York, 1983.
366. Blaga, A. and Yamasaki, R. S., "Mechanism of Breakdown in the Interface Region of Glass Reinforced Polyester by Artificial Weathering," Journal of Materials Science, Vol. 8, 1973, pp. 654-666.
367. Blaga, A., "Weathering Study of Glass-Fiber Reinforced Polyester Sheets by Scanning Electron Microscopy," Polymer Engineering and Science, Vol. 12, No.1, January, 1972, pp. 52-58.
368. Chester, R. J. and Baker, A. A., "Environmental Durability of F/A-18 GR/EP Composites," Proceedings of the 10th International Conference on Composite Materials (ICCM/IO), Vol. VI, Whistler, B. C., Canada, August, 1995.
369. The Weathering of Plastics Materials in the Tropics: 7-Evaluation of the Weathering Behaviour of a Variety of Glass Reinforced Polyester and Epoxy Systems, Procurement Executive, Ministry of Defense/ British Federation Joint Working Party on the Aging and Weathering of Polymers and Composites, 1982.
370. Bulmanis, V. N., Gunyaev, G. M., Krivonos, V. V., Mashinskaya, G. P., Merkulova, V. M., Milyutin, G. I., Gerasimov, A. A., and Kuzmin, S. A., "Atmospheric Durability of Polymer -Fiber Composites in Cold Climates," Mechanics of Composite Materials, Vol. 27, No. 6, 1991, pp. 698-705.
371. Yamasaki, R. S., "Surface Weatherability of Glass-Fiber-Reinforced Polyester Sheeting. I. Effect of Modification of Resin Chemical Composition," Composite Technology Review, Vol. 4, No. 3, Fall 1982, pp. 84-87.
372. Yamasaki, R. S., "Surface Weatherability of Glass-Fiber-Reinforced Polyester Sheeting. I. Effect of Constituents," Composite Technology Review, Vol. 4, No. 3, Fall 1982, pp. 84-87.
373. Williams, J. G., "The Effects of Tropical Weathering on Glass-Reinforced Epoxy Resins," Composites, July, 1977, pp. 157-160.
374. Norris, J. F., Crowder, J. R., and Probert, C., "The Weathering of Glass-Reinforced Polyester under Stress - Short Term Behavior," Composites, July, 1976, pp. 165-172.
375. Jain, R. K., Goswamy, S. K., and Asthama. K. K., "A study of the Effect of Natural Weathering on the Creep Behavior of Glass Fibre-Reinforced Polyester Laminates," Composites, January, 1979, pp. 39-43.
376. Gomez, J. and Casto, B., "Freeze-Thaw Durability of Composite Materials," Fiber Composites in Infrastructure, Proceedings of the First International Conference on Composites in Infrastructure, H. Saadatmanesh and M. R. Ehsani Eds., Tucson, AZ, 15-17 January, 1996, pp. 947-955.
377. Vishwanath, B., Verma, A. P., and Kameswara-Rao, C. V. S., "Effect of Matrix Content on Strength and Wear of Woven Roving Glass Polymeric Composites," Composites Science and Technology, Vol. 44, 1992, pp. 77-86.
378. Lindheim, T., "Erosion Performance of Glass Fibre Reinforced Plastics (GRP)," Revue De L'Institut Francais Du Petrole, Vol. 50, No. 1, 1995, pp. 83-95.
379. Hager, A., Friedrich, K., Dzenis, Y. A., and Paipetis, S. A., "Study of Erosion Wear of Advanced Polymer Composites," Proceedings of the 10th International Conference on Composite Materials (ICCM/10), Whistler, British Columbia, Canada, August 1995, Vol. IV, pp. 155-162.
380. Chin, J., Materials Aspects of Fiber-Reinforced Polymer Composites in Infrastructure, NISTIR 5888, National Institute of Standards and Technology, August, 1996.
381. Karbhari, V. M. and Shulley, S. B., "Use of Composites for Rehabilitation of Steel Structures - Determination of Bond Durability," Journal of Materials in Civil Engineering, November, 1995, pp. 239-245.
382. Karbhari, V. M. and Engineer, M., "On the Use of a Modified Peel Test for Determination of Concrete-Composite Bond Durability," Proceedings of the 40th International SAMPE Symposium, May 8-11, 1995, pp. 1953-1970.
383. Bourban, P. E., McKnight, S. H., Shulley, S. B., Karbhari, V. M., and Gillespie, J. W., Jr., "Durability of Steel/ Composites Bonds for Rehabilitation of Structural Components," Infrastructure: New Materials and Methods of Repair, Proceedings of the 3rd Materials Engineering Conference, K. D. Basham Ed., San Diego, CA, November 13-16, 1994, pp. 295-302.
384. Xie, M., Hoa, S. V., and Xiao, X. R., "Bonding Steel Reinforced Concrete with Composites," Journal of Reinforced Plastics and Composites, Vol. 14, September, 1995, pp. 949-964.
385. Chajes, M. J., Mertz, D. R., Thomson, T. A., Jr., and Farschman, C. A., "Durability of Composite Materials Reinforcement," Infrastructure: New Materials and Methods of Repair, Proceedings of the 3rd Materials Engineering Conference, K. D. Basham Ed., San Diego, CA, November 13-16, 1994, pp. 598-605.
386. Chajes, M. J., Thomson, T. A., Jr., and Farschman, C. A., "Durability of Concrete Beams Externally Reinforced with Composite Fabrics," Construction and Building Materials, Vol. 9, No. 3, 1995, pp. 141-148.
387. Muszynski, L. C. and Sierakowski, R. L., "Durability of Carbon Fiber Reinforced Plastics (CFRPs) as External Reinforcement of Concrete Beams," Proceedings of the 50th Annual Conference, Composite Institute, 1995, p. 4-C/1.
388. Su, N., Mackie, R. I., and Harvey, W. J., "The Effect of Ageing and Environment on the Fatigue Life of Adhesive Joints," International Journal of Adhesion and Adhesives, Vol. 12, No. 2, April, 1992, pp. 85-93.
389. Summerscales, J. and Short, D., "Carbon Fibre and Glass Fibre Hybrid Reinforced Plastics," Composites, July, 1978, pp. 157-166.
390. Zhu, X., Li, Z., Jin, Y., and Shaw, W. J. D., "Creep Behavior of a Hybrid Fibre (Glass/Carbon)-Reinforced Composite and Its Application," Composite Science and Technology, Vol. 50, 1994, pp. 431-439.
391. Profile, Quarterly Newsletter from Morrison Molded Fiber Glass Company, Summer, 1996, p. 4.
392. Wells, H. and Hancox, N. L., "Stiffening and Strengthening GRP Beams with CFRP," Composites, September, 1971, pp. 147-151.
393. French, M. A. and Pritchard, G., "The Fracture Surfaces of Hybrid Fibre Composites," Composites Science and Technology, Vol. 47, 1993, pp. 217-223.
394. French, M. A. and Pritchard, G., "Strength Retention of Glass/Carbon Hybrid Laminate in Aqueous Media," Durability of Polymer Based Composite Systems for Structural Applications, A. H. Cardon and G. Verchery Eds., Elsevier Applied Science, New York, 1992, pp. 345-354.
395. Manders, P. W. and Bader, M. G., "The Strength of Hybrid Glass/Carbon Fibre Composites, Part 1," Journal of Materials Science, Vol. 16, 1981, pp. 2233-2245.
396. Manders, P. W. and Bader, M. G., "The Strength of Hybrid Glass/Carbon Fibre Composites, Part 2," Journal of Materials Science, Vol. 16, 1981, pp. 2246-2256.
397. Bunsell, A. R. and Harris, B., "Hybrid Carbon and Glass Fibre Composites," Composites, July, 1974, pp. 157-164.
398. Chang, D. C., "Hybrid-Fiber-Reinforced Sheet Molding Compound Composite," Composite Materials: Testing and Design (6th Conference), ASTM STP 787, I. M. Daniel, Ed., American Society for Testing and Materials, 1982, pp. 58-100.
399. Zweben, C, "Tensile Strength of Hybrid Composites," Journal of Materials Science,Vol. 12, 1977, pp. 1325-1337.
400. Wang, S. S., Personal Communication, March, 1997.
401. Hitchon, J. W., and Phillips, D. C., "The Effect of Specimen Size on the Strength of CFRP," Composites, April, 1978, pp. 119-124.
402. Zweben, C., "Is There a Size Effect in Composites?" Composites, Vol. 25, No. 6, 1994, pp. 451-454.