Low-pressure ethane/nitrogen gas mixture plasma surface modification effect on the wetting and electrochemical performance of polymeric separator for lithium-ion batteries

Journal of the Taiwan Institute of Chemical Engineers

Volumn 45, Issue 6, 2014, Pages 3046-3051

  Juang, Ruey Shin ^a   Liang, Chia Han ^b   Ma, Wei Chun ^b   Tsai, Ching Yuan ^b   Huang, Chun ^b  

^a CHANG GUNG UNIVERSITY   (Taiwan)

^b YUAN ZE UNIVERSITY   (Taiwan)

Author keywords

Electrochemical property; Plasma chemical vapor deposition; Polymeric separator; Surface analyses; Wettability

Indexed keywords

CHEMICAL ANALYSIS; CHEMICAL MODIFICATION; CONTACT ANGLE; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ELECTROCHEMICAL PROPERTIES; ELECTROLYTES; ETHANE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GAS MIXTURES; LITHIUM-ION BATTERIES; PLASMA CVD; POLYMERS; SEPARATORS; SURFACE ANALYSIS; X RAY PHOTOELECTRON SPECTROSCOPY;

CHEMICAL SPECIES; ELECTROCHEMICAL CHARACTERISTICS; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY MEASUREMENTS; ELECTROCHEMICAL PERFORMANCE; PLASMA CHEMICAL VAPOR DEPOSITION; PLASMA SURFACE MODIFICATIONS; POLAR COMPONENTS; POLYMERIC SEPARATOR;

WETTING;

EID: 85027939266     PISSN: 18761070     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jtice.2014.08.023     Document Type: Article

References (32)

1. Kim J.Y., Lee Y., Lim D.Y. Plasma-modified polyethylene membrane as a separator for lithium-ion polymer battery. Electrochim Acta 2009, 54:3714-3719.
2. Kim J.Y., Lim D.Y. Surface-modified membrane as a separator for lithium-ion polymer battery. Energies 2010, 3:866-885.
3. Fang J., Kelarakis A., Lin Y.W., Kang C.Y., Yang M.H., Cheng C.L., et al. Nanoparticle-coated separators for lithium-ion batteries with advanced electrochemical performance. Phys Chem Chem Phys 2011, 13:14457-14461.
4. Li J., Daniel C., Wood D. Materials processing for lithium-ion batteries. J Power Sources 2011, 196:2452-2460.
5. Zhang S.S. A review on the separators of liquid electrolyte Li-ion batteries. J Power Sources 2007, 164:351-364.
6. Ogumi Z., Abe T., Fukutsuka T., Yamate S., Iriyama Y. Lithium-ion transfer at interface between carbonaceous thin film electrode/electrolyte. J Power Sources 2004, 127:72-75.
7. Gilliam M.A., Yu Q.S. Surface characterization of low-temperature cascade arc plasma-treated low-density polyethylene using contact angle measurements. J Appl Polym Sci 2006, 99:2528-2541.
8. Gilliam M.A., Yu Q. Surface modification of a group of polymers using a low temperature cascade arc torch. J Appl Polym Sci 2007, 105:360-372.
9. 2 capture with large absorption flux enhancements. ChemSusChem 2013, 6:437-442.
10. Liu D., Zhou J., Fisher E.R. Correlation of gas-phase composition with film properties in the plasma-enhanced chemical vapor deposition of hydrogenated amorphous carbon nitride films. J Appl Phys 2007, 101:023304.
11. Chen K.S., Wei T.C., Li M.S., Wu H.M., Tang T.P., Wang C.Y., et al. Chemical characterization of plasma-polymerized films from acetylene and nitrogen-containing mixtures and their ethanol vapor sensitivity. Radiat Phys Chem 2007, 76:941-950.
12. Wang P., Takeno T., Adachi K., Miki H., Takagi T. Preparation and tribological characterization of amorphous carbon nitride coatings in a RF PECVD-DC PVD hybrid coating process. Appl Surf Sci 2012, 258:6576-6582.
13. 2 flow rate on the properties of CNx thin films prepared by radio frequency plasma enhanced chemical vapor deposition from ethane and nitrogen. Thin Solid Films 2013, 529:439-443.
14. Owens D.K., Wendt R.C. Estimation of the surface free energy of polymers. J Appl Polym Sci 1969, 13:1741-1747.
15. Yasuda H. Luminous chemical vapor deposition and interface engineering 2005, Marcel Dekker, New York.
16. Inagaki N., Tasaka S., Hibi K. Surface modification of kapton film by plasma treatments. J Polym Sci Part A 1992, 30:1425-1431.
17. Bhattacharyya S., Granier A., Turban G. Growth, microstructure and electronic properties of amorphous carbon nitride films investigated by plasma diagnostics. J Appl Phys 1999, 86:4668-4676.
18. Andrieux M., Badie J.M., Ducarroir M., Thomas L. Optical emission spectroscopy of RF and microwave plasmas used for chemical vapor deposition in the Si-C-H-Ar system. Ann Chim Sci Mat 1998, 23:743-752.
19. 2 rf plasmas using optical emission spectroscopy. J Appl Phys 1996, 79:7227-7233.
20. 2 plasma using emission spectroscopy. Thin Solid Films 1995, 266:8-13.
21. Liu X.W., Lin J.H., Tseng C.H., Shih H.C. Optical and structural properties of the amorphous carbon nitride by ECR-plasma. Mater Chem Phys 2001, 72:258-263.
22. Renevier N., Collignon P., Michel H., Czerwiec T. New trends on nitriding in low pressure arc discharges studied by optical emission spectroscopy. Surf Coat Technol 1996, 86-87:285-291.
23. Timmermans E.A.H., Jonkers J., Rodero A., Quintero M.C., Sola A., Gamero A., et al. Behavior of molecules in microwave-induced plasmas studied by optical emission spectroscopy. 2: Plasmas at reduced pressure. Spectrochim Acta Part B 1999, 54:1085-1098.
24. Jeong B.Y., Kim M.H. Effects of the process parameters on the layer formation behavior of plasma nitrided steels. Surf Coat Technol 2001, 141:182-186.
25. 2, and CH by spatially resolved optical emission in a diamond depositing dc-arcjet reactor. J Vac Sci Technol A 1998, 16:397-408.
26. Takadoum J., Rauch J.Y., Cattenot J.M., Martin N. Comparative study of mechanical and tribological properties of CNx and DLC films deposited by PECVD technique. Surf Coat Technol 2003, 174-175:427-433.
27. Khanis N.H., Ritikos R., Othman M., Rashid N.M.A., Gani S.M.A., Rahman S.A. Catalyst free carbon nitride nanostructures prepared by rf-PECVD technique on hydrogenated amorphous carbon template. Mater Chem Phys 2013, 138:514-518.
28. Stillahn J.M., Fisher E.R. CN surface interactions and temperature-dependent film growth during plasma deposition of amorphous, hydrogenated carbon nitride. J Phys Chem C 2009, 113:1963-1971.
29. 4 cathode in organic electrolyte solutions with different compositions at 55°C. Electrochim Acta 2002, 47:3483-3489.
30. Stepniak I., Ciszewski A. Grafting effect on the wetting and electrochemical performance of carbon cloth electrode and polypropylene separator in electric double layer capacitor. J Power Sources 2010, 195:5130-5137.
31. Cheng B., Jiao X., Kang W. Studies on grafting of acrylic acid onto polypropylene melt-blown nonwovens induced by electron-beam preirradiation. J Appl Polym Sci 2006, 102:4971-4977.
32. 4 flow ratio on microstructure and composition of hydrogenated carbon nitride films prepared by a dual DC-RF plasma system. J Non-Cryst Solids 2007, 353:136-142.