Modification of Gums: Synthesis Techniques and Pharmaceutical Benefits

Handbook of Polymers for Pharmaceutical Technologies

Volumn 3, Issue , 2015, Pages 299-364

  Rana, Vikas ^a   Kamboj, Sunil ^a   Sharma, Radhika ^a   Singh, Kuldeep ^a  

^a PUNJABI UNIVERSITY   (India)

Author keywords

Carbamoyl ethylation; Carboxymethylation; Differential scanning calorimetry; Grafting; Gum modification; Phosphorylation; Rheology; Sulfation; Thiolation; X ray powder diffraction

Indexed keywords

ACCIDENT PREVENTION; BIOCOMPATIBILITY; BIODEGRADABILITY; BIODEGRADABLE POLYMERS; CHEMICAL MODIFICATION; CONTROLLED DRUG DELIVERY; CROSSLINKING; DIFFERENTIAL SCANNING CALORIMETRY; DRUG DOSAGE; EMULSIFICATION; GRAFTING (CHEMICAL); PHOSPHORYLATION; RHEOLOGY; X RAY POWDER DIFFRACTION;

CARBAMOYL; CARBOXYMETHYLATION; GUM MODIFICATION; SULFATION; THIOLATION;

TARGETED DRUG DELIVERY;

EID: 85019499943     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119041450.ch10     Document Type: Chapter

References (159)

1. P. Goyal, V. Kumar, and P. Sharma, Carboxymethylation of tamarind kernel powder, Carbohydr. Polym., 69 (2), 251-255, 2007.
2. B.R. Sharma, V. Kumar, and P. Soni, Carbamoylethylation of guar gum, Carbohydr. Polym., 58 (4), 449-453, 2004.
3. B.R. Sharma, V. Kumar, and P. Soni, Carbamoylethylation of Cassia tora gum, Carbohydr. Polym., 54 (2), 143-147, 2003.
4. L. Yang, T. Zhao, H. Wei, M. Zhang, Y. Zou, G. Mao, and X. Wu, Carboxymethylation of polysaccharides from Auricularia auricula and their antioxidant activities in vitro, Int. J. Biol. Macromol., 49 (5), 1124-1130, 2011.
5. D.A. Silva, R. de Paula, J. Feitosa, A.C. de Brito, J.S. Maciel, and H.C. Paula, Carboxymethylation of cashew tree exudate polysaccharide, Carbohydr. Polym., 58 (2), 163-171, 2004.
6. A. Kumar, and M. Ahuja, Carboxymethyl gum kondagogu: Synthesis, characterization and evaluation as mucoadhesive polymer, Carbohydr. Polym., 90 (1), 637-643, 2012.
7. H. Bidgoli, A. Zamani, and M. J. Taherzadeh, Effect of carboxymethylation conditions on the water-binding capacity of chitosan-based superabsorbents, Carbohydr. Res., 345 (18), 2683-2689, 2010.
8. J. Xu, W. Liu, W. Yao, X. Pang, D. Yin, and X. Gao, Carboxymethylation of a polysaccharide extracted from Ganoderma lucidum enhances its antioxidant activities in vitro, Carbohydr. Polym., 78 (2), 227-234, 2009.
9. S. Gupta, P. Sharma, and P. Soni, Chemical modification of Cassia occidentalis seed gum: carbamoylethylation, Carbohydr. Polym., 59 (4), 501-506, 2005.
10. P.R. Rai, A. Tiwary, and V. Rana, Superior disintegrating properties of calcium cross-linked Cassia fistula gum derivatives for fast dissolving tablets, Carbohydr. Polym., 87 (2), 1098-1104, 2012.
11. M. Jindal, V. Rana, V. Kumar, R.S. Singh, J.F. Kennedy, and A.K. Tiwary, Sulfation of Aegle marmelos gum: Synthesis, physico-chemical and functional characterization, Carbohydr. Polym., 92 (2), 1660-1668, 2013.
12. S. Bo, T. Muschin, T. Kanamoto, H. Nakashima, and T. Yoshida, Sulfation and biological activities of konjac glucomannan, Carbohydr. Polym., 94 (2), 899-903, 2013.
13. J. Wang, B. Zhao, X. Wang, J. Yao, and J. Zhang, Structure and antioxidant activities of sul-fated guar gum: Homogeneous reaction using DMAP/DCC catalyst, Int. J. Biol. Macromol., 50 (5), 1201-1206, 2012.
14. J. Wang, B. Zhao, X. Wang, and J. Zhang, Preparation and characterization of sulfated galactomannan from guar gum: Optimization of reaction conditions by BBD and molecule conformational studies, J. Taiwan Inst. Chem. Eng., 43 (6), 889-896, 2012.
15. S. Niu, J. Wang, B. Zhao, M. Zhao, M. Nie, X. Wang, J. Yao, and J. Zhang, Regioselective synthesis and antioxidant activities of phosphorylated guar gum, Int. J. Biol. Macromol., 62, 741-747, 2013.
16. A. Bernkop-Schnürch, U. Brandt, and A. Clausen, Synthesis and in vitro evaluation of chitosan-cysteine conjugates, Sci. Pharm., 67, 196-208, 1999.
17. A. Bernkop-Schnurchand, T.E. Hopf, Synthesis and in vitro evaluation of chitosan-thioglycolic acid conjugates, Scientia Pharmaceutica, 69 (2), 109-118, 2001.
18. A. Bernkop-Schnürch, C.E. Kast, and M.F. Richter, Improvement in the mucoadhesive properties of alginate by the covalent attachment of cysteine, J. Controlled Release., 71 (3), 277-285, 2001.
19. A. Bernkop-Schnürch, M. Hornof, and T. Zoidl, Thiolated polymers-thiomers: Synthesis and in vitro evaluation of chitosan-2-iminothiolane conjugates, Int. J. Pharm., 260 (2), 229-237, 2003.
20. R. Sharmaand M. Ahuja, Thiolated pectin: Synthesis, characterization and evaluation as a mucoadhesive polymer, Carbohydr. Polym., 85 (3), 658-663, 2011.
21. S. Yadav, M. Ahuja, A. Kumar, and H. Kaur, Gellan-thioglycolic acid conjugate: Synthesis, characterization and evaluation as mucoadhesive polymer, Carbohydr. Polym., 99, 601-607, 2014.
22. H.S. Mahajan, V.K. Tyagi, R.R. Patil, and S.B. Dusunge, Thiolated xyloglucan: Synthesis, characterization and evaluation as mucoadhesive in situ gelling agent, Carbohydr. Polym., 91 (2), 618-625, 2013.
23. R. Singh, T. Tripathy, G. Karmakar, S. Rath, N. Karmakar, S. Pandey, K. Kannan, S. Jain, and N. Lan, Novel biodegradable flocculants based on polysaccharides, Current Science-Bangalore, 78 (7), 798-803, 2000.
24. R. Gref, J. Rodrigues, and P. Couvreur, Polysaccharides grafted with polyesters: Novel amphiphilic copolymers for biomedical applications, Macromolecules, 35 (27), 9861-9867, 2002.
25. Y. Ohya, S. Maruhashi, T. Hirano, and T. Ouchi, "Preparation of poly (lactic acid)-grafted polysaccharides as biodegradable amphiphilic materials," in: Biomedical Polymers and Polymer Therapeutics, pp. 139-148, 2002.
26. V. Singh, A. Tiwari, D.N. Tripathi, and R. Sanghi, Microwave assisted synthesis of guar-gpolyacrylamide, Carbohydr. Polym., 58 (1), 1-6, 2004.
27. M.M. Fares, A.S. El-faqeeh, and M.E. Osman, Graftcopolymerization onto starch-I. Synthesis and optimization of starch grafted with N-tert-butylacrylamide copolymer and its hydrogels, J. Polym. Res., 10 (2), 119-125, 2003.
28. B.R. Sharma, V. Kumar, and P. Soni, Ce (IV)-ion initiated graftcopolymerization of methyl methacrylate onto guar gum, J. Macromol. Sci. Part A, 40 (1), 49-60, 2003.
29. E. Ikhuoria, A. Folayan, and F. Okieimen, Studies in the graftcopolymerization of acrylonitrile onto cassava starch by ceric ion induced initiation, Int.J. Biotech. Mol. Biol. Res., 1 (1), 10-14, 2010.
30. M. Celik, Preparation and characterization of starch-g-polymethacrylamide copolymers, J. Polym. Res., 13 (5), 427-432, 2006.
31. A. Tiwariand V. Singh, Microwave-induced synthesis of electrical conducting gum acacia-graft-polyaniline, Carbohydr. Polym., 74 (3), 427-434, 2008.
32. G. Sen, R.P. Singh, and S. Pal, Microwave initiated synthesis of polyacrylamide grafted sodium alginate: Synthesis and characterization, J. Appl. Polym. Sci., 115 (1), 63-71, 2010.
33. J. Zhang, S. Zhang, K. Yuan, and Y. Wang, Graftcopolymerization of artemisia seed gum with acrylic acid under microwave and its water absorbency, J. Macromol. Sci. Part A: Pure Appl Chem., 44 (8), 881-885, 2007.
34. G. Huacai, P. Wan, and L. Dengke, Graftcopolymerization of chitosan with acrylic acid under microwave irradiation and its water absorbency, Carbohydr. Polym., 66 (3), 372-378, 2006.
35. V. Singh, A. Tiwari, D.N. Tripathi, and R. Sanghi, Grafting of polyacrylonitrile onto guar gum under microwave irradiation, J. Appl. Polym. Sci., 92 (3), 1569-1575, 2004.
36. V. Singh, A.K. Sharma, and S. Maurya, Efficient cadmium(ii) removal from aqueous solution using microwave synthesized guar gum-graft-poly(ethylacrylate), Ind. Eng. Chem. Res., 48 (10), 4688-4696, 2009.
37. A. Mishra, J.H. Clark, A. Vij, and S. Daswal, Synthesis of graftcopolymers of xyloglucan and acrylonitrile, Polym. Adv. Technol., 19 (2), 99-104, 2008.
38. C. Ramkissoon-Ganorkar, F. Liu, M. Baudyš, and S.W. Kim, Modulating insulin-release profile from pH/thermosensitive polymeric beads through polymer molecular weight, J. Control. Release, 59 (3), 287-298, 1999.
39. I.G. Needleman, and F.C. Smales, In vitro assessment of bioadhesion for periodontal and buccal drug delivery, Biomaterials, 16 (8), 617-624, 1995.
40. R.A. Siegel, M. Falamarzian, B.A. Firestone, and B.C. Moxley, pH-controlled release from hydrophobic/polyelectrolyte copolymer hydrogels, J. Control. Release, 8 (2), 179-182, 1988.
41. P.M. Torre, Y. Enobakhare, G. Torrado, and S. Torrado, Release of amoxicillin from polyionic complexes of chitosan and poly (acrylic acid). Study of polymer/polymer and polymer/drug interactions within the network structure, Biomaterials, 24 (8), 1499-1506, 2003.
42. P. Goyal, V. Kumar, and P. Sharma, Graftcopolymerization of acrylamide onto tamarind kernel powder in the presence of ceric ion, J. Appl. Polym. Sci., 108 (6), 3696-3701, 2008.
43. B. Raj Sharma, V. Kumar, and P. Soni, Ceric ammonium nitrate initiated graftcopolymerization of acrylamide onto Cassia tora gum, J. Appl. Polym. Sci., 86 (13), 3250-3255, 2002.
44. M. George, and T. Abraham, pH sensitive alginate-guar gum hydrogel for the controlled delivery of protein drugs, Int. J. Pharm., 335 (1), 123-129, 2007.
45. K.S. Soppimath, A.R. Kulkarni, and T.M. Aminabhavi, Controlled release of antihypertensive drug from the interpenetrating network poly (vinyl alcohol)-guar gum hydrogel microspheres, J. Biomater. Sci. Polym. Ed., 11 (1), 27-43, 2000.
46. S. Kaity, J. Isaac, and A. Ghosh, Interpenetrating polymer network of locust bean gumpoly (vinyl alcohol) for controlled release drug delivery, Carbohydr. Polym., 94 (1), 456-467, 2013.
47. K.S. Soppirnath, and T.M. Aminabhavi, Water transport and drug release study from cross-linked polyacrylamide grafted guar gum hydrogel microspheres for the controlled release application, Eur. J. Pharm. Biopharm., 53 (1), 87-98, 2002.
48. I. Gliko-Kabir, B. Yagen, M. Baluom, and A. Rubinstein, Phosphated crosslinked guar for colon-specific drug delivery: II. In vitro and in vivo evaluation in the rat, J. Control. Release, 63 (1), 129-134, 2000.
49. V. Dulong, S. Lack, D. Le Cerf, L. Picton, J. Vannier, and G. Muller, Hyaluronan-based hydrogels particles prepared by crosslinking with trisodium trimetaphosphate. Synthesis and characterization, Carbohydr. Polym., 57 (1), 1-6, 2004.
50. V. Rana, P. Rai, A.K. Tiwary, R.S. Singh, J.F. Kennedy, and C.J. Knill, Modified gums: Approaches and applications in drug delivery, Carbohydr. Polym., 83 (3), 1031-1047, 2011.
51. I. Gliko-Kabir, B. Yagen, A. Penhasi, and A. Rubinstein, Phosphated crosslinked guar for colon-specific drug delivery: I. Preparation and physicochemical characterization, J. Control. Release, 63 (1), 121-127, 2000.
52. A. Shalviri, Q. Liu, M.J. Abdekhodaie, and X.Y. Wu, Novel modified starch-xanthan gum hydrogels for controlled drug delivery: Synthesis and characterization, Carbohydr. Polym., 79 (4), 898-907, 2010.
53. S. Bajpai, S.K. Saxena, and S. Sharma, Swelling behavior of barium ions-crosslinked bipolymeric sodium alginate-carboxymethyl guar gum blend beads, React. Funct. Polym., 66 (6), 659-666, 2006.
54. S.S. Bhattacharya, S. Banerjee, P. Chowdhury, A. Ghosh, R.R. Hegde, and R. Mondal, Tranexamic acid loaded gellan gum-based polymeric microbeads for controlled release: In vitro and in vivo assessment, Colloid. Surface. B: Biointerfaces., 112, 483-491, 2013.
55. D.A. Silva, J. Feitosa, J.S. Maciel, H.C. Paula, and R. de Paula, Characterization of cross-linked cashew gum derivatives, Carbohydr. Polym., 66 (1), 16-26, 2006.
56. J. Song, C.H. Suh, Y.B. Park, S.H. Lee, N.C. Yoo, J.D. Lee, K.H. Kim, and S.K. Lee, A phase I/IIa study on intra-articular injection of holmium-166-chitosan complex for the treatment of knee synovitis of rheumatoid arthritis, Eur. J. Nucl. Med., 28 (4), 489-497, 2001.
57. J. Berger, M. Reist, J. Mayer, O. Felt, and R. Gurny, Structure and interactions in chitosan hydrogels formed by complexation or aggregation for biomedical applications, Eur. J. Pharm. Biopharm., 57 (1), 35-52, 2004.
58. J. Knapczyk, S. Majewski, B. Pawlik, and G. Wisniewska, "Preclinical study of antimycotic chitosan hydrogel efficacy," in: Chitin World, Wirtschaftsverlag, Bremerhaven, pp. 504-511, 1994.
59. J. Kanapczyk, Z. Karnicki, M. Brzeski, P. Bykowski, and A. Woytasz-Pajak, "Some aspects of chitosan hydrogel ointment base formulation," in: Z.S. Karnicki, M.M. Brzeski, P.J. Bykowski, eds., Chitin World, pp. 512-519, 1994.
60. N.A. Peppasand A.G. Mikos, Preparation methods and structure of hydrogels, Hydrogels in Medicine and Pharmacy, 1, 1-27, 1986.
61. H. Brack, S. Tirmizi, and W. Risen, Jr., A spectroscopic and viscometric study of the metal ion-induced gelation of the biopolymer chitosan, Polymer, 38 (10), 2351-2362, 1997.
62. O.A. Monteiro, Jr., and C. Airoldi, Some studies of crosslinking chitosan-glutaraldehyde interaction in a homogeneous system, Int. J. Biol. Macromol., 26 (2), 119-128, 1999.
63. W. Argüelles-Monal, F. Goycoolea, C. Peniche, and I. Higuera-Ciapara, Rheological study of the chitosan/glutaraldehyde chemical gel system, Polym. Gels Netw., 6 (6), 429-440, 1998.
64. M. Wang, Y. Fang, and D. Hu, Preparation and properties of chitosan-poly (N-isopropylacrylamide) full-IPN hydrogels, React. Funct. Polym., 48 (1), 215-221, 2001.
65. K.D. Yao, T. Peng, M. Goosen, J.M. Min, and Y.Y. He, pH sensitivity of hydrogels based on complex forming chitosan: Polyether interpenetrating polymer network, J. Appl. Polym. Sci., 48 (2), 343-354, 1993.
66. K.S. Soppimath, A.R. Kulkarni, and T.M. Aminabhavi, Chemically modified polyacryl-amide-g-guar gum-based crosslinked anionic microgels as pH-sensitive drug delivery systems: Preparation and characterization, J. Control. Release, 75 (3), 331-345, 2001.
67. S. Durmaz, and O. Okay, Acrylamide/2-acrylamido-2-methylpropane sulfonic acid sodium salt-based hydrogels: Synthesis and characterization, Polymer., 41 (10), 3693-3704, 2000.
68. K. Thakur, M. Ahuja, and A. Kumar, Carboxymethyl functionalization of amylopectin and its evaluation as a nanometric drug carrier, Int. J. Biol. Macromol., 62, 25-29, 2013.
69. S. Kaity, J. Isaac, P.M. Kumar, A. Bose, T.W. Wong, and A. Ghosh, Microwave assisted synthesis of acrylamide grafted locust bean gum and its application in drug delivery, Carbohydr. Polym., 98 (1), 1083-1094, 2013.
70. A. Kumar, K. Singh, and M. Ahuja, Xanthan-g-poly (acrylamide): Microwave-assisted synthesis, characterization and In vitro release behavior, Carbohydr. Polym., 76 (2), 261-267, 2009.
71. M. Ahuja, S. Singh, and A. Kumar, Evaluation of carboxymethyl gellan gum as a mucoadhesive polymer, Int. J. Biol. Macromol., 53, 114-121, 2013.
72. X. Peng, J. Ren, and R. Sun, An efficient method for the synthesis of hemicellulosic derivatives with bifunctional groups in butanol/water medium and their rheological properties, Carbohydr. Polym., 83 (4), 1922-1928, 2011.
73. S. Kaity, and A. Ghosh, Carboxymethylation of locust bean gum: Application in interpenetrating polymer network microspheres for controlled drug delivery, Ind. Eng. Chem. Res., 52 (30), 10033-10045, 2013.
74. V. Vijan, S. Kaity, S. Biswas, J. Isaac, and A. Ghosh, Microwave assisted synthesis and characterization of acrylamide grafted gellan, application in drug delivery, Carbohydr. Polym., 90 (1), 496-506, 2012.
75. R.C. Mundargi, S.A. Patil, and T.M. Aminabhavi, Evaluation of acrylamide-grafted-xan-than gum copolymer matrix tablets for oral controlled delivery of antihypertensive drugs, Carbohydr. Polym., 69 (1), 130-141, 2007.
76. A. Setia, and R. Kumar, Microwave assisted synthesis and optimization of Aegle marmelos-g-poly (acrylamide): Release kinetics studies, Int. J. Biol. Macromol., 65, 462-470, 2014.
77. R. Singh, S. Maity, and B. Sa, Effect of ionic crosslink on the release of metronidazole from partially carboxymethylated guar gum tablet, Carbohydr, Polym., 106, 414-421, 2014.
78. V.L. Campo, D.F. Kawano, D.B. da Silva, Jr., and I. Carvalho, Carrageenans: Biological properties, chemical modifications and structural analysis-A review, Carbohydr. Polym., 77 (2), 167-180, 2009.
79. D. Ekeberg, S.H. Knutsen, and M. Sletmoen, Negative-ion electrospray ionisation-mass spectrometry (ESI-MS) as a tool for analysing structural heterogeneity in kappa-carrageenan oligosaccharides, Carbohydr. Res., 334 (1), 49-59, 2001.
80. R.I. Montolalu, Y. Tashiro, S. Matsukawa, and H. Ogawa, Effects of extraction parameters on gel properties of carrageenan from Kappaphycus alvarezii (Rhodophyta), Journal of Applied Phycology, 20 (5), 71-76, 2008.
81. V. Spichtigand S. Austin, Determination of the low molecular weight fraction of food-grade carrageenans, J. Chromatogr. B, 861 (1), 81-87, 2008.
82. T. Hjerde, O. Smidsrød, and B.E. Christensen, Analysis of the conformational properties of κ-and ι-carrageenan by size-exclusion chromatography combined with low-angle laser light scattering, Biopolymers, 49 (1), 71-80, 1999.
83. S. Girod, P. Baldet-Dupy, H. Maillols, and J.-M. Devoisselle, On-line direct determination of the second virial coefficient of a natural polysaccharide using size-exclusion chromatography and multi-angle laser light scattering, J. Chromatogr. A, 943 (1), 147-152, 2002.
84. Y. Uno, T. Omoto, Y. Goto, I. Asai, M. Nakamura, and T. Maitani, Molecular weight distribution of carrageenans studied by a combined gel permeation/inductively coupled plasma (GPC/ICP) method, Food Addit. Contam., 18 (9), 763-772, 2001.
85. R.G. Beri, J. Walker, E.T. Reese, and J.E. Rollings, Characterization of chitosans via coupled size-exclusion chromatography and multiple-angle laser light-scattering technique, Carbohydr. Res., 238, 11-26, 1993.
86. M.L. Fishman, P.E. Pfeffer, R.A. Barford, and L.W. Doner, Studies of pectin solution properties by high-performance size exclusion chromatography, J. Agric. Food Chem., 32 (2), 372-378, 1984.
87. U.S. Toti, and, T.M. Aminabhavi, Modified guar gum matrix tablet for controlled release of diltiazem hydrochloride, J. Control. Release, 95 (3), 567-577, 2004.
88. M. Maruf, M. Saifee, J. Sangshetti, and Z. Zaheer, Synthesis and characterization of pH-sensitive poly (methacrylic acid)-graft-karaya gum as a matrix for controlled release tablets, Indo American J. Pharm. Res., 4 (2), 1224-1237, 2014.
89. A.K. Nayak, D. Pal, and K. Santra, Tamarind seed polysaccharide-gellan mucoadhesive beads for controlled release of metformin HCl, Carbohydr. Polym., 103, 154-163, 2014.
90. M. Ahuja, S. Singh, and A. Kumar, Evaluation of carboxymethyl gellan gum as a mucoadhesive polymer, Int. J. Biol. Macromol., 53, 114-121, 2013.
91. S. Malik, A. Kumar, and M. Ahuja, Synthesis of gum kondagogu-g-poly (N-vinyl-2-pyrrolidone) and its evaluation as a mucoadhesive polymer, Int. J. Biol. Macromol., 51 (5), 756-762, 2012.
92. V. Sinha, B. Mittal, K. Bhutani, and R. Kumria, Colonic drug delivery of 5-fluorouracil: An in vitro evaluation, Int. J. Pharm., 269 (1), 101-108, 2004.
93. M.A. Casadei, G. Pitarresi, R. Calabrese, P. Paolicelli, and G. Giammona, Biodegradable and pH-sensitive hydrogels for potential colon-specific drug delivery: Characterization and in vitro release studies, BioMacromolecules, 9 (1), 43-49, 2007.
94. S.R. Kumar, T. Piyush, R. Suman, and T. Akanksha, Preparation and characterization of cross-linked guar gum microspheres: Optimization using factorial design, Chem. Pharm. Bull. (Tokyo), 59 (2), 185, 2011.
95. M. Chourasia, and S. Jain, Design and development of multiparticulate system for targeted drug delivery to colon, Drug Delivery, 11 (3), 201-207, 2004.
96. A. Das, S. Wadhwa, and A. Srivastava, Cross-linked guar gum hydrogel discs for colon-specific delivery of ibuprofen: Formulation and in vitro evaluation, Drug Delivery, 13 (2), 139-142, 2006.
97. R.C. Mundargi, S.A. Patil, S.A. Agnihotri, and T.M. Aminabhavi, Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis, Drug Dev. Ind. Pharm., 33 (3), 255-264, 2007.
98. C. Ji, H. Xu, and W. Wu, In vitro evaluation and pharmacokinetics in dogs of guar gum and Eudragit FS30D-coated colon-targeted pellets of indomethacin, J. Drug Target., 15 (2), 123-131, 2007.
99. S.J. Aher, S. Jagdale, and D. Dhachinamoorthi, Formulation and evaluation of colon specific drug delivery of naproxen sodium using guar gum and xanthan gum, Indo American J. Pharm. Res., 4 (3), 1530-1538, 2014.
100. V. Kumar, A. Tiwary, and G. Kaur, Investigations on chitosan-carboxymethyl guar gum complexes interpolymer complexes for colon delivery of fluticasone, Inter. J. Drug Deliv., 2 (3), 2010.
101. S. Das, A. Chaudhury, and K.-Y. Ng, Preparation and evaluation of zinc-pectin-chitosan composite particles for drug delivery to the colon: Role of chitosan in modifying In vitro and In vivo drug release, Int. J. Pharm., 406 (1), 11-20, 2011.
102. Z.-L. Liu, H. Hu, and R.-X. Zhuo, Konjac glucomannan-graft-acrylic acid hydrogels containing azo crosslinker for colon-specific delivery, J. Polym. Sci. Part A: Polym. Chem., 42 (17), 4370-4378, 2004.
103. L.-G. Chen, Z.-L. Liu, and R.-X. Zhuo, Synthesis and properties of degradable hydrogels of konjac glucomannan grafted acrylic acid for colon-specific drug delivery, Polymer, 46 (16), 6274-6281, 2005.
104. X. Wen, X. Cao, Z. Yin, T. Wang, and C. Zhao, Preparation and characterization of konjac glucomannan-poly (acrylic acid) IPN hydrogels for controlled release, Carbohydr. Polym., 78 (2), 193-198, 2009.
105. J. Liu, L. Zhang, W. Hu, R. Tian, Y. Teng, and C. Wang, Preparation of konjac glucomannan-based pulsatile capsule for colonic drug delivery system and its evaluation in vitro and in vivo, Carbohydr. Polym., 87 (1), 377-382, 2012.
106. B.N. Singhand, K.H. Kim, Characterization and relevance of physicochemical interactions among components of a novel multiparticulate formulation for colonic delivery, Int. J. Pharm., 341 (1), 143-151, 2007.
107. A. Jain, S.K. Jain, N. Ganesh, J. Barve, and A.M. Beg, Design and development of ligand-appended polysaccharidic nanoparticles for the delivery of oxaliplatin in colorectal cancer, Nanomedicine: Nanotechnology, Biology and Medicine, 6 (1), 179-190, 2010.
108. S. Hirsch, V. Binder, V. Schehlmann, K. Kolter, and K.H. Bauer, Lauroyldextran and cross-linked galactomannan as coating materials for site-specific drug delivery to the colon, Eur. J. Pharm. Biopharm., 47 (1), 61-71, 1999.
109. R. Kumar, M. Patil, S.R. Patil, and M.S. Paschapur, Polysaccharides based colon specific drug delivery: A review, Inter. J. PharmTech Res., 1 (2), 334-346, 2009.
110. R. Khurana, K. Singh, B. Sapra, A. Tiwary, and V. Rana, Tamarindus indica pectin blend film composition for coating tablets with enhanced adhesive force strength, Carbohydr. Polym., 102, 55-65, 2014.
111. J. Berger, M. Reist, J. Mayer, O. Felt, N. Peppas, and R. Gurny, Structure and interactions in covalently and ionically crosslinked chitosan hydrogels for biomedical applications, Eur. J. Pharm. Biopharm., 57 (1), 19-34, 2004.
112. L. Tan, L. Chan, and P. Heng, Effect of oil loading on microspheres produced by spray drying, J. Microencapsul., 22 (3), 253-259, 2005.
113. X. Zheng, Y. Huang, C. Zheng, S. Dong, and W. Liang, Alginate-Chitosan-PLGA composite microspheres enabling single-shot Hepatitis B vaccination, AAPS Pharmscitech, 12 (4), 519-524, 2010.
114. J.K. Sarmah, R. Mahanta, S.K. Bhattacharjee, R. Mahanta, and A. Biswas, Controlled release of tamoxifen citrate encapsulated in cross-linked guar gum nanoparticles, Int. J. Biol. Macromol., 49 (3), 390-396, 2011.
115. A. Kumarand, M. Ahuja, Carboxymethyl gum kondagogu-chitosan polyelectrolyte complex nanoparticles: Preparation and characterization, Int. J. Biol. Macromol., 62, 80-84, 2013.
116. R.S. Soumya, S. Ghosh, and E.T. Abraham, Preparation and characterization of guar gum nanoparticles, Int. J. Biol. Macromol., 46 (2), 267-269, 2010.
117. C.-M. Lee, S. Lim, G.-Y. Kim, D.-W. Kim, J. H. Rhee, and K.-Y. Lee, Rosin nanoparticles as a drug delivery carrier for the controlled release of hydrocortisone, Biotechnol. Lett., 27 (19), 1487-1490, 2005.
118. J.K. Sarmah, S.K. Bhattacharjee, R. Mahanta, and R. Mahanta, Preparation of cross-linked guar gum nanospheres containing tamoxifen citrate by single step emulsion in situ polymer cross-linking method, J. Inclusion Phenom. Macrocyclic Chem., 65 (3-4), 329-334, 2009.
119. G.A. Magalhães, Jr., C.M. Santos, D.A. Silva, J.S. Maciel, J. Feitosa, H.C. Paula, and R. de Paula, Microspheres of chitosan/carboxymethyl cashew gum (CH/CMCG): Effect of chitosan molar mass and CMCG degree of substitution on the swelling and BSA release, Carbohydr. Polym., 77 (2), 217-222, 2009.
120. G.M. Eichenbaum, P.F. Kiser, D. Shah, S.A. Simon, and D. Needham, Investigation of the swelling response and drug loading of ionic microgels: The dependence on functional group composition, Macromolecules, 32 (26), 8996-9006, 1999.
121. A.A. AL-Kahtani, and B. Sherigara, Semi-interpenetrating network of acrylamide-grafted-sodium alginate microspheres for controlled release of diclofenac sodium, preparation and characterization, Colloid. Surface. B: Biointerfaces, 115, 132-138, 2014.
122. Y. Huang, H. Yu, and C. Xiao, pH-sensitive cationic guar gum/poly (acrylic acid) polyelectrolyte hydrogels: Swelling and in vitro drug release, Carbohydr. Polym., 69 (4), 774-783, 2007.
123. B. Singh, and N. Sharma, Modification of sterculia gum with methacrylic acid to prepare a novel drug delivery system, Int. J. Biol. Macromol., 43 (2), 142-150, 2008.
124. S. Thakur, G.S. Chauhan, and J.-H. Ahn, Synthesis of acryloyl guar gum and its hydrogel materials for use in the slow release of l-DOPA and l-tyrosine, Carbohydr. Polym., 76 (4), 513-520, 2009.
125. A.V. Reis, M.R. Guilherme, O.A. Cavalcanti, A.F. Rubira, and E.C. Muniz, Synthesis and characterization of pH-responsive hydrogels based on chemically modified Arabic gum polysaccharide, Polymer., 47 (6), 2023-2029, 2006.
126. M. Liu, J. Fan, K. Wang, and Z. He, Synthesis, characterization, and evaluation of phosphated cross-linked konjac glucomannan hydrogels for colon-targeted drug delivery, Drug Delivery, 14 (6), 397-402, 2007.
127. V.D. Prajapati, G.K. Jani, N.G. Moradiya, and N.P. Randeria, Pharmaceutical applications of various natural gums, mucilages and their modified forms, Carbohydr. Polym., 92 (2), 1685-1699, 2013.
128. D.A. da Silva, R. de Paula, and J. Feitosa, Graftcopolymerisation of acrylamide onto cashew gum, Eur. Polym. J., 43 (6), 2620-2629, 2007.
129. S.R. Deshmukh, and R.P. Singh, Drag reduction effectiveness, shear stability and biodegradation resistance of guargum-based graftcopolymers, J. Appl. Polym. Sci., 33 (6), 1963-1975, 1987.
130. K. Behari, P. Pandey, R. Kumar, and K. Taunk, Graftcopolymerization of acrylamide onto xanthan gum, Carbohydr. Polym., 46 (2), 185-189, 2001.
131. U.S. Toti, K.S. Soppimath, N.N. Mallikarjuna, and T.M. Aminabhavi, Acrylamide grafted acacia gum polymer matrix tablets as erosion controlled drug delivery systems, J. Appl. Polym. Sci., 93 (5), 2245-2253, 2004.
132. T. Tripathy, and R. Singh, Characterization of polyacrylamide grafted sodium alginate: A novel polymeric flocculant, J. Appl. Polym. Sci., 81 (13), 3296-3308, 2001.
133. V. Singh, A. Tiwari, D.N. Tripathi, and R. Sanghi, Microwave enhanced synthesis of chitosan-graft-polyacrylamide, Polymer, 47 (1), 254-260, 2006.
134. S.K. Verma, V.S. Pandey, M. Yadav, and K. Behari, Grafting of N-(hydroxymethyl) acryl-amide on to κ-carrageenan: Synthesis, characterization and applications, Carbohydr. Polym., 102, 590-597, 2014.
135. M. Shahid, S.A. Bukhari, Y. Gul, H. Munir, F. Anjum, M. Zuber, T. Jamil, and K.M. Zia, Graftpolymerization of guar gum with acryl amide irradiated by microwaves for colonic drug delivery, Int. J. Biol. Macromol., 62, 172-179, 2013.
136. V.S. Pandey, S.K. Verma, M. Yadav, and K. Behari, Guar gum-g-N, N'-dimethylacrylamide: Synthesis, characterization and applications, Carbohydr. Polym., 99, 284-290, 2014.
137. S. Malik, and M. Ahuja, Gum kondagogu-g-poly (acrylamide): Microwave-assisted synthesis, characterisation and release behaviour, Carbohydr. Polym., 86 (1), 177-184, 2011.
138. H. Gong, M. Liu, J. Chen, F. Han, C. Gao, and B. Zhang, Synthesis and characterization of carboxymethyl guar gum and rheological properties of its solutions, Carbohydr. Polym., 88 (3), 1015-1022, 2012.
139. J. Pacheco-Aguirre, G. Rosado-Rubio, D. Betancur-Ancona, and L. Chel-Guerrero, Physicochemical properties of carboxymethylated flamboyant (Delonix regia) seed gum Propiedades fisicoquímicas de la goma carboximetilada de flamboyán (Delonix regia), CyTA-Journal of Food, 8 (3), 169-176, 2010.
140. S. Alban, A. Schauerte, and G. Franz, Anticoagulant sulfated polysaccharides: Part I. Synthesis and structure-activity relationships of new pullulan sulfates, Carbohydr. Polym., 47 (3), 267-276, 2002.
141. A.A. Roos, U. Edlund, J. Sjoberg, A.C. Albertsson, and H. Stålbrand, Protein release from galactoglucomannan hydrogels: Influence of substitutions and enzymatic hydrolysis by β-mannanase, BioMacromolecules, 9 (8), 2104-2110, 2008.
142. G. Sen, S. Mishra, U. Jha, and S. Pal, Microwave initiated synthesis of polyacrylamide grafted guar gum (GG-g-PAM)-Characterizations and application as matrix for controlled release of 5-amino salicylic acid, Int. J. Biol. Macromol., 47 (2), 164-170, 2010.
143. M. Chaurasia, M.K. Chourasia, N.K. Jain, A. Jain, V. Soni, Y. Gupta, and S.K. Jain, Cross-linked guar gum microspheres: A viable approach for improved delivery of anticancer drugs for the treatment of colorectal cancer, AAPS Pharmscitech, 7 (3), E143-E151, 2006.
144. I. Gliko-Kabir, B. Yagen, A. Penhasi, and A. Rubinstein, Low swelling, crosslinked guar and its potential use as colon-specific drug carrier, Pharm. Res., 15 (7), 1019-1025, 1998.
145. S. Sharma, J. Kaur, G. Sharma, K.K. Thakur, G.S. Chauhan, and K. Chauhan, Preparation and characterization of pH-responsive guar gum microspheres, Int. J. Biol. Macromol., 62, 636-641, 2013.
146. M. Yamagar, V. Kadam, and R. Hirlekar, Design and evaluation of buccoadhesive drug delivery system of metoprolol tartrate, Inter. J. PharmTech Res., 2 (1), 2010.
147. M. Carafa, C. Marianecci, L. Di Marzio, F. Rinaldi, C. Di Meo, P. Matricardi, F. Alhaique, and T. Coviello, A new vesicle-loaded hydrogel system suitable for topical applications: Preparation and characterization, J. Pharm. Pharm. Sci., 14 (3), 336-346, 2011.
148. C.V. Raghavan, C. Muthulingam, J. Jenita, and T.K. Ravi, An in vitro and in vivo investigation into the suitability of bacterially triggered delivery system for colon targeting, Chem. Pharm. Bull. (Tokyo), 50 (7), 892-895, 2002.
149. S. Suzukiand J. Lim, Microencapsulation with carrageenan-locust bean gum mixture in a multiphase emulsification technique for sustained drug release, J. Microencapsul., 11 (2), 197-203, 1994.
150. R.V. Kulkarni, V.V. Nagathan, P.R. Biradar, and A.A. Naikawadi, Simvastatin loaded composite polyspheres of gellan gum and carrageenan: In vitro and in vivo evaluation, Int. J. Biol. Macromol., 57, 238-244, 2013.
151. M. Ahuja, M. Yadav, and S. Kumar, Application of response surface methodology to formulation of ionotropically gelled gum cordia/gellan beads, Carbohydr. Polym., 80 (1), 161-167, 2010.
152. J. Fan, K. Wang, M. Liu, and Z. He, In vitro evaluations of konjac glucomannan and xan-than gum mixture as the sustained release material of matrix tablet, Carbohydr. Polym., 73 (2), 241-247, 2008.
153. F. Alvarez-Manceñido, M. Landin, I. Lacik, and R. Martínez-Pacheco, Konjac glucomannan and konjac glucomannan/xanthan gum mixtures as excipients for controlled drug delivery systems. Diffusion of small drugs, Int. J. Pharm., 349 (1), 11-18, 2008.
154. A. Jaipal, M. Pandey, A. Abhishek, S. Vinay, and S. Charde, Interaction of calcium sul-fate with xanthan gum: Effect on in vitro bioadhesion and drug release behavior from xanthan gum based buccal discs of buspirone, Colloid. Surface. B: Biointerfaces, 111, 644-650, 2013.
155. B. Singh, G. Chauhan, S. Kumar, and N. Chauhan, Synthesis, characterization and swelling responses of pH sensitive psyllium and polyacrylamide based hydrogels for the use in drug delivery (I), Carbohydr. Polym., 67 (2), 190-200, 2007.
156. B. Singh, G. Chauhan, D. Sharma, and N. Chauhan, The release dynamics of salicylic acid and tetracycline hydrochloride from the psyllium and polyacrylamide based hydrogels (II), Carbohydr. Polym., 67 (4), 559-565, 2007.
157. B. Singhand N. Chauhan, Modification of psyllium polysaccharides for use in oral insulin delivery, Food Hydrocoll., 23 (3), 928-935, 2009.
158. B. Singh, N. Sharma, and N. Chauhan, Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery, Carbohydr. Polym., 69 (4), 631-643, 2007.
159. M.R. Avadi, A.M.M. Sadeghi, N. Mohammadpour, S. Abedin, F. Atyabi, R. Dinarvand, and M. Rafiee-Tehrani, Preparation and characterization of insulin nanoparticles using chitosan and Arabic gum with ionic gelation method, Nanomedicine: Nanotechnology, Biology and Medicine, 6 (1), 58-63, 2010.