Assessment of the biomechanical stability of a dental implant with quantitative ultrasound: A three-dimensional finite element study

Journal of the Acoustical Society of America

Volumn 139, Issue 2, 2016, Pages 773-780

  Vayron, Romain ^a   Nguyen, Vu Hieu ^a   Bosc, Romain ^b   Naili, Salah ^a   Haïat, Guillaume ^c,d  

^a Centre National de la Recherche Scientifique   (France)

^b UNIVERSITÉ PARIS EST CRÉTEIL   (France)

^c CNRS   (France)

^d ÉCOLE DE TECHNOLOGIE SUPÉRIEURE   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMECHANICS; BONE; FINITE ELEMENT METHOD; IMPLANTS (SURGICAL); THERMOELECTRICITY; TISSUE; ULTRASONIC APPLICATIONS;

BIOMECHANICAL PROPERTIES; BIOMECHANICAL STABILITY; CLINICAL PRACTICES; QUANTITATIVE ULTRASOUND TECHNIQUES; QUANTITATIVE ULTRASOUNDS; THREE DIMENSIONAL FINITE ELEMENT MODEL; THREE DIMENSIONAL FINITE ELEMENTS; ULTRASONIC RESPONSE;

DENTAL PROSTHESES;

TOOTH IMPLANT;

BIOMECHANICS; COMPARATIVE STUDY; COMPUTER SIMULATION; DEVICES; DIAGNOSTIC IMAGING; ECHOGRAPHY; FINITE ELEMENT ANALYSIS; HUMAN; JAW; MATHEMATICAL COMPUTING; MOTION; OSSEOINTEGRATION; PROCEDURES; PROSTHESIS DESIGN; PROSTHESIS IMPLANTATION; REPRODUCIBILITY; SIGNAL PROCESSING; SURGERY; TOOTH IMPLANT; VALIDATION STUDY;

BIOMECHANICAL PHENOMENA; COMPUTER SIMULATION; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; FINITE ELEMENT ANALYSIS; HUMANS; JAW; MOTION; NUMERICAL ANALYSIS, COMPUTER-ASSISTED; OSSEOINTEGRATION; PROSTHESIS IMPLANTATION; REPRODUCIBILITY OF RESULTS; SIGNAL PROCESSING, COMPUTER-ASSISTED; ULTRASONOGRAPHY;

EID: 84958555106     PISSN: 00014966     EISSN: None     Source Type: Journal    
DOI: 10.1121/1.4941452     Document Type: Article

References (52)

1. Aparicio, C., Lang, N. R., and Rangert, B. (2006). " Validity and clinical significance of biomechanical testing of implant/bone interface," Clin. Oral Implants Res. 17, 2-7. 10.1111/j.1600-0501.2006.01365.x
2. Arndt, C., Voigt, C., Steinke, H., von Salis-Soglio, G., and Scholz, R. (2012). " Experimental evidence of impingement induced strains at the interface and the periphery of an embedded acetabular cup implant," J. Biomech. Eng. 134, 011007. 10.1115/1.4005686
3. Bardyn, T., Gedet, P., Hallermann, W., and Buchler, P. (2009). " Quantifying the influence of bone density and thickness on resonance frequency analysis: An in vitro study of biomechanical test materials," Int. J. Oral Maxillofac. Implants 24, 1006-1014.
4. Blanco, J., Alvarez, E., Munoz, F., Linares, A., and Cantalapiedra, A. (2011). " Influence on early osseointegration of dental implants installed with two different drilling protocols: A histomorphometric study in rabbit," Clin. Oral Implants Res. 22, 92-99. 10.1111/j.1600-0501.2010.02009.x
5. Blanes, R. J., Bernard, J. P., Blanes, Z. M., and Belser, U. C. (2007). " A 10-year prospective study of ITI dental implants placed in the posterior region. I: Clinical and radiographic results," Clin. Oral Implants Res. 18, 699-706. 10.1111/j.1600-0501.2006.01306.x
6. Chang, M. C., Ko, C. C., Liu, C. C., Douglas, W. H., DeLong, R., Seong, W. J., Hodges, J., and An, K. N. (2003). " Elasticity of alveolar bone near dental implant-bone interfaces after one month's healing," J. Biomech. 36, 1209-1214. 10.1016/S0021-9290(03)00113-1
7. de Almeida, M. S., Maciel, C. D., and Pereira, J. C. (2007). " Proposal for an ultrasonic tool to monitor the osseointegration of dental implants," Sensors 7, 1224-1237. 10.3390/s7071224
8. Franchi, M., Bacchelli, B., Giavaresi, G., De Pasquale, V., Martini, D., Fini, M., Giardino, R., and Ruggeri, A. (2007). " Influence of different implant surfaces on peri-implant osteogenesis: Histomorphometric analysis in sheep," J. Periodont. 78, 879-888. 10.1902/jop.2007.060280
9. Frost, H. M. (2003). " Bone's mechanostat: A 2003 update," Anat. Rec., Part A 275A, 1081-1101. 10.1002/ar.a.10119
10. Gill, A., and Shellock, F. G. (2012). " Assessment of MRI issues at 3-Tesla for metallic surgical implants: Findings applied to 61 additional skin closure staples and vessel ligation clips," J. Cardiov. Magn. Reson. 14, 3. 10.1186/1532-429X-14-3
11. Haïat, G., and Naili, S. (2011). " Independent scattering model and velocity dispersion in trabecular bone," Biomech. Model Mechanobiol. 10, 95-108. 10.1007/s10237-010-0220-z
12. Haiat, G., Naili, S., Ba Vu, M., Desceliers, C., and Soize, C. (2011). " Equivalent contributing depth investigated by a lateral wave with axial transmission in viscoelastic cortical bone," J. Acoust. Soc. Am. 129, 114-120. 10.1121/1.3554719
13. Haiat, G., Naili, S., Grimal, Q., Talmant, M., Desceliers, C., and Soize, C. (2009). " Influence of a gradient of material properties on ultrasonic wave propagation in cortical bone: Application to axial transmission," J. Acoust. Soc. Am. 125, 4043-4052. 10.1121/1.3117445
14. Haiat, G., Padilla, F., Peyrin, F., and Laugier, P. (2007). " Variation of ultrasonic parameters with microstructure and material properties of trabecular bone: A 3D model simulation," J. Bone Miner. Res. 22, 665-674. 10.1359/jbmr.070209
15. Haïat, G., Padilla, F., Peyrin, F., and Laugier, P. (2008). " Fast wave propagation in trabecular bone: Numerical study of the influence of porosity and structural anisotropy," J. Acoust. Soc. Am. 123, 1684-1705. 10.1121/1.2832611
16. Haiat, G., Wang, H. L., and Brunski, J. B. (2014). " Effects of biomechanical properties of the bone-implant interface on dental implant stability: From in silico approaches to the patient's mouth," Annu. Rev. Biomed. Eng. 16, 187-213. 10.1146/annurev-bioeng-071813-104854
17. Huja, S. S., Katona, T. R., Burr, D. B., Garetto, L. P., and Roberts, W. E. (1999). " Microdamage adjacent toendosseousimplants," Bone 25, 217-222. 10.1016/S8756-3282(99)00151-9
18. Luo, G. M., Sadegh, A. M., Alexander, H., Jaffe, W., Scott, D., and Cowin, S. C. (1999). " The effect of surface roughness on the stress adaptation of trabecular architecture around a cylindrical implant," J. Biomech. 32, 275-284. 10.1016/S0021-9290(98)00172-9
19. Mathieu, V., Anagnostou, F., Soffer, E., and Haiat, G. (2011a). " Numerical simulation of ultrasonic wave propagation for the evaluation of dental implant biomechanical stability," J. Acoust. Soc. Am. 129, 4062-4072. 10.1121/1.3586788
20. Mathieu, V., Anagnostou, F., Soffer, E., and Haiat, G. (2011b). " Ultrasonic evaluation of dental implant biomechanical stability: An in vitro study," Ultrasound Med. Biol. 37, 262-270. 10.1016/j.ultrasmedbio.2010.10.008
21. Mathieu, V., Fukui, K., Matsukawa, M., Kawabe, M., Vayron, R., Soffer, E., Anagnostou, F., and Haiat, G. (2011c). " Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant," J. Biomech. Eng. 133, 021006. 10.1115/1.4003131
22. Mathieu, V., Vayron, R., Barthel, E., Dalmas, D., Soffer, E., Anagnostou, F., and Haiat, G. (2012). " Mode III cleavage of a coin-shaped titanium implant in bone: Effect of friction and crack propagation," J. Mech. Behav. Biomed. Mater. 8, 194-203. 10.1016/j.jmbbm.2011.12.012
23. Mathieu, V., Vayron, R., Richard, G., Lambert, G., Naili, S., Meningaud, J. P., and Haiat, G. (2014). " Biomechanical determinants of the stability of dental implants: Influence of the bone-implant interface properties," J. Biomech. 47, 3-13. 10.1016/j.jbiomech.2013.09.021
24. Meredith, N., Alleyne, D., and Cawley, P. (1996). " Quantitative determination of the stability of the implant-tissue interface using resonance frequency analysis," Clin. Oral Implants Res. 7, 261-267. 10.1034/j.1600-0501.1996.070308.x
25. Meredith, N., Friberg, B., Sennerby, L., and Aparicio, C. (1998). " Relationship between contact time measurements and PTV values when using the Periotest to measure implant stability," Int. J. Prosthodont. 11, 269-275.
26. Merheb, J., Van Assche, N., Coucke, W., Jacobs, R., Naert, I., and Quirynen, M. (2010). " Relationship between cortical bone thickness or computerized tomography-derived bone density values and implant stability," Clin. Oral Implants Res. 21, 612-617. 10.1111/j.1600-0501.2009.01880.x
27. Naili, S., Vu, M. B., Grimal, Q., Talmant, M., Desceliers, C., Soize, C., and Haiat, G. (2010). " Influence of viscoelastic and viscous absorption on ultrasonic wave propagation in cortical bone: Application to axial transmission," J. Acoust. Soc. Am. 127, 2622-2628. 10.1121/1.3353091
28. Njeh, C. F., Hans, D., Wu, C., Kantorovich, E., Sister, M., Fuerst, T., and Genant, H. K. (1999). " An in vitro investigation of the dependence on sample thickness of the speed of sound along the specimen," Med. Eng. Phys. 21, 651-659. 10.1016/S1350-4533(99)00090-9
29. Nkenke, E., Hahn, M., Weinzierl, K., Radespiel-Troger, M., Neukam, F. W., and Engelke, K. (2003). " Implant stability and histomorphometry: A correlation study in human cadavers using stepped cylinder implants," Clin. Oral Implants Res. 14, 601-609. 10.1034/j.1600-0501.2003.00937.x
30. Pattijn, V., Jaecques, S. V. N., De Smet, E., Muraru, L., Van Lierde, C., Van der Perre, G., Naert, I., and Sloten, J. V. (2007). " Resonance frequency analysis of implants in the guinea pig model: Influence of boundary conditions and orientation of the transducer," Med. Eng. Phys. 29, 182-190. 10.1016/j.medengphy.2006.02.010
31. Pattijn, V., Van Lierde, C., Van der Perre, G., Naert, I., and Sloten, J. V. (2006). " The resonance frequencies and mode shapes of dental implants: Rigid body behaviour versus bending behaviour. A numerical approach," J. Biomech. 39, 939-947. 10.1016/j.jbiomech.2005.01.035
32. Sansalone, V., Bousson, V., Naili, S., Bergot, C., Peyrin, F., Laredo, J. D., and Haiat, G. (2012). " Anatomical distribution of the degree of mineralization of bone tissue in human femoral neck: Impact on biomechanical properties," Bone 50, 876-884. 10.1016/j.bone.2011.12.020
33. Sasso, M., Haiat, G., Talmant, M., Laugier, P., and Naili, S. (2008). " Singular value decomposition-based wave extraction in axial transmission: Application to cortical bone ultrasonic characterization," IEEE Trans. Ultrason. Ferroelectr. Freq. Control 55, 1328-1332. 10.1109/TUFFC.2008.795
34. Schulte, W., d'Hoedt, B., Lukas, D., Muhlbradt, L., Scholz, F., Bretschi, J., Frey, D., Gudat, H., Konig, M., and Markl, M. (1983). " Periotest-A new measurement process for periodontal function," Zahnarztl. Mitt. 73, 1229-1230.
35. Serra, G., Morais, L. S., Elias, C. N., Meyers, M. A., Andrade, L., Muller, C., and Muller, M. (2008). " Sequential bone healing of immediately loaded mini-implants," Am. J. Orthod. Dentofacial Orthop. 134, 44-52. 10.1016/j.ajodo.2006.09.057
36. Shalabi, M. M., Wolke, J. G. C., Cuijpers, V., and Jansen, J. A. (2007). " Evaluation of bone response to titanium-coated polymethyl methacrylate resin (PMMA) implants by X-ray tomography," J. Mater. Sci.: Mater. Med. 18, 2033-2039. 10.1007/s10856-007-3160-0
37. Souffrant, R., Zietz, C., Fritsche, A., Kluess, D., Mittelmeier, W., and Bader, R. (2012). " Advanced material modelling in numerical simulation of primary acetabular press-fit cup stability," Comput. Methods Biomech. Biomed. Eng. 15, 787-793. 10.1080/10255842.2011.561012
38. Turkyilmaz, I., Aksoy, U., and McGlumphy, E. A. (2008). " Two alternative surgical techniques for enhancing primary implant stability in the posterior maxilla: A clinical study including bone density, insertion torque, and resonance frequency analysis data," Clin. Implant Dent. Rel. Res. 10, 231-237. 10.1111/j.1708-8208.2008.00084.x
39. Turkyilmaz, I., Tozum, T. F., Tumer, C., and Ozbek, E. N. (2006). " Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement," J. Oral Rehabil. 33, 881-888. 10.1111/j.1365-2842.2006.01692.x
40. Turkyilmaz, I., Tumer, C., Ozbek, E. N., and Tozum, T. F. (2007). " Relations between the bone density values from computerized tomography, and implant stability parameters: A clinical study of 230 regular platform implants," J. Clin. Periodontol. 34, 716-722. 10.1111/j.1600-051X.2007.01112.x
41. Valderrama, P., Oates, T. W., Jones, A. A., Simpson, J., Schoolfield, J. D., and Cochran, D. (2007). " Evaluation of two different resonance frequency devices to detect implant stability: A clinical trial," J. Periodont. 78, 262-272. 10.1902/jop.2007.060143
42. Van Scotter, D. E., and Wilson, C. J. (1991). " The Periotest method for determining implant success," J. Oral Implantol. 17, 410-413.
43. Vayron, R., Barthel, E., Mathieu, V., Soffer, E., Anagnostou, F., and Haiat, G. (2011). " Variation of biomechanical properties of newly formed bone tissue determined by nanoindentation as a function of healing time," Comput. Methods Biomech. Biomed. Eng. 14, 139-140. 10.1080/10255842.2011.593770
44. Vayron, R., Barthel, E., Mathieu, V., Soffer, E., Anagnostou, F., and Haiat, G. (2012). " Nanoindentation measurements of biomechanical properties in mature and newly formed bone tissue surrounding an implant," J. Biomech. Eng. 134, 021007. 10.1115/1.4005981
45. Vayron, R., Karasinski, P., Mathieu, V., Michel, A., Loriot, D., Richard, G., Lambert, G., and Haiat, G. (2013). " Variation of the ultrasonic response of a dental implant embedded in tricalcium silicate-based cement under cyclic loading," J. Biomech. 46, 1162-1168. 10.1016/j.jbiomech.2013.01.003
46. Vayron, R., Mathieu, V., Michel, A., and Haiat, G. (2014a). " Assessment of the in vitro dental implant primary stability using an ultrasonic method," Ultrasound Med. Biol. 40, 2885-2894. 10.1016/j.ultrasmedbio.2014.03.035
47. Vayron, R., Matsukawa, M., Mathieu, V., Barthel, E., Soffer, E., Anagnostou, F., and Haiat, G. (2014b). " Evolution of bone biomechanical properties at the micrometer scale around titanium implant as a function of healing time," Phys. Med. Biol. 59, 1389-1406. 10.1088/0031-9155/59/6/1389
48. Vayron, R., Nguyen, V. H., Bosc, R., Naili, S., and Haiat, G. (2015). " Finite element simulation of ultrasonic wave propagation in a dental implant for biomechanical stability assessment," Biomech. Model. Mechanbiol. 14, 1021-1032. 10.1007/s10237-015-0651-7
49. Vayron, R., Soffer, E., Anagnostou, F., and Haiat, G. (2014c). " Ultrasonic evaluation of dental implant osseointegration," J. Biomech. 47, 3562-3568. 10.1016/j.jbiomech.2014.07.011
50. Wang, J. Y., Tozzi, G., Chen, J., Contal, F., Lupton, C., and Tong, J. (2010a). " Bone-cement interfacial behaviour under mixed mode loading conditions," J. Mech. Behav. Biomed. Mater. 3, 392-398. 10.1016/j.jmbbm.2010.03.001
51. Wang, Z. Q., Zhao, Z. H., Xue, J., Song, J. L., Deng, F., and Yang, P. (2010b). " Pullout strength of miniscrews placed in anterior mandibles of adult and adolescent dogs: A microcomputed tomographic analysis," Am. J. Orthod. Dentofac. Orthop. 137, 100-107. 10.1016/j.ajodo.2008.01.025
52. Zhao, L. X., Xu, Z. R., Yang, Z., Wei, X., Tang, T., and Zhao, Z. H. (2009). " Orthodontic mini-implant stability in different healing times before loading: A microscopic computerized tomographic and biomechanical analysis," Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 108, 196-202. 10.1016/j.tripleo.2009.03.023