Mode III cleavage of a coin-shaped titanium implant in bone: Effect of friction and crack propagation

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 8, Issue , 2012, Pages 194-203

  Mathieu, Vincent ^a   Vayron, Romain ^b   Barthel, Etienne ^a   Dalmas, Davy ^a   Soffer, Emmanuel ^a,c   Anagnostou, Fani ^a,c   Haiat, Guillaume ^b  

^a CNRS   (France)

^b Centre National de la Recherche Scientifique   (France)

^c PITIÉ SALPÊTRIÈRE HOSPITAL   (France)

Author keywords

Bone; Cleavage; Implant; Mode III; Osseointegration

Indexed keywords

BONE TISSUE; BONE-IMPLANT INTERFACES; CEMENTLESS; CLEAVAGE; DEBONDING PROCESS; EXPERIMENTAL APPROACHES; IMPLANT SURFACE; MECHANICAL DEVICE; MEDICAL TREATMENT; MICROSCOPY IMAGES; MODE III; NEW ZEALAND WHITE RABBIT; OSSEOINTEGRATION; TITANIUM IMPLANTS; TORSIONAL LOADINGS; TORSIONAL STIFFNESS;

ADHESION; BIOMECHANICS; IMPLANTS (SURGICAL); STRUCTURAL LOADS; TISSUE; TITANIUM;

BONE;

TITANIUM;

ADHESION; ANIMAL EXPERIMENT; ANIMAL TISSUE; ARTICLE; BONE REGENERATION; ELASTICITY; EXPERIMENTAL RABBIT; FEMALE; FRICTION; IMPLANT; MECHANICAL TORSION; MODEL; NONHUMAN; PRIORITY JOURNAL; RIGIDITY; SHEAR STRESS; TIBIA;

ALUMINUM; ANIMALS; FRICTION; MATERIALS TESTING; MODELS, THEORETICAL; PROSTHESES AND IMPLANTS; RABBITS; TIBIA; TITANIUM; TORQUE; VANADIUM;

EID: 84857802798     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2011.12.012     Document Type: Article

References (70)

1. Albrektsson T., Dahl E., Enbom L., Engevall S., Engquist B., Eriksson A.R., Feldmann G., Freiberg N., Glantz P.O., Kjellman O., Kristersson L., Kvint S., Kondell P.A., Palmquist J., Werndahl L., Astrand P. Osseointegrated oral implants-a Swedish multicenter study of 8139 consecutively inserted nobelpharma implants. J. Periodontol. 1988, 59:287-296.
2. Barthel E. On the description of the adhesive contact of spheres with arbitrary interaction potentials. J. Colloid Interface Sci. 1998, 200:7-18.
3. Basire C., Fretigny C. Determination of viscoelastic moduli at a submicrometric scale. Eur. Phys. J. Appl. Phys. 1999, 6:323-329.
4. Berzins A., Shah B., Weinans H., Sumner D.R. Nondestructive measurements of implant-bone interface shear modulus and effects of implant geometry in pull-out tests. J. Biomed. Mater. Res. 1997, 34:337-340.
5. Bhushan B. Adhesion and stiction: mechanisms, measurement techniques, and methods for reduction. J. Vac. Sci. Technol. B 2003, 21:2262.
6. Bowden F.P., Tabor D. The Friction and Lubrification of Solids 2001, vol. 1. Oxford University Press.
7. Branemark R., Ohrnell L.O., Nilsson P., Thomsen P. Biomechanical characterization of osseointegration during healing: an experimental in vivo study in the rat. Biomaterials 1997, 18:969-978.
8. Branemark R., Ohrnell L.O., Skalak R., Carlsson L., Branemark P.I. Biomechanical characterization of osseointegration: an experimental in vivo investigation in the beagle dog. J. Orthop. Res. 1998, 16:61-69.
9. Branemark R., Skalak R. An in-vivo method for biomechanical characterization of bone-anchored implants. Med. Eng. Phys. 1998, 20:216-219.
10. Buser D., Dula K., Lang N.P., Nyman S. Long-term stability of osseointegrated implants in bone regenerated with the membrane technique-5-year results of a prospective study with 12 implants. Clin. Oral. Implants Res. 1996, 7:175-183.
11. Butz F., Aita H., Wang C.J., Ogawa T. Harder and stiffer bone osseointegrated to roughened titanium. J. Dent. Res. 2006, 85:560-565.
12. Chateauminois A., Fretigny C., Olanier L. Friction and shear fracture of an adhesive contact under torsion. Phys. Rev. E 2010, 81:12.
13. Cook S.D., Barrack R.L., Dalton J.E., Thomas K.A., Brown T.D. Effects of indomethacin on biologic fixation of porous-coated titanium implants. J. Arthroplasty 1995, 10:351-358.
14. de Moura M., Morais J.J.L., Dourado N. A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test. Eng. Fract. Mech. 2008, 75:3852-3865.
15. Duyck J., Vandamme K., Geris L., Van Oosterwyck H., De Cooman M., Vandersloten J., Puers R., Naert I. The influence of micro-motion on the tissue differentiation around immediately loaded cylindrical turned titanium implants. Arch. Oral Biol. 2006, 51:1-9.
16. Edwards J.T., Brunski J.B., Higuchi H.W. Mechanical and morphologic investigation of the tensile strength of a bone-hydroxyapatite interface. J. Biomed. Mater. Res. 1997, 36:454-468.
17. Ehart R.J.A., Stanzl-Tschegg S.E., Tschegg E.K. Mode III fracture energy of wood composites in comparison to solid wood. Wood Sci. Technol. 1999, 33:391-405.
18. Ellingsen J.E. Surface configurations of dental implants. J. Periodontol. 2000, 17:36-46.
19. Franchi M., Bacchelli B., Giavaresi G., De Pasquale V., Martini D., Fini M., Giardino R., Ruggeri A. Influence of different implant surfaces on peri-implant osteogenesis: histomorphometric analysis in sheep. J. Periodontol. 2007, 78:879-888.
20. Giavaresi G., Fini M., Cigada A., Chiesa R., Rondelli G., Rimondini L., Torricelli P., Aldini N.N., Giardino R. Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone. Biomaterials 2003, 24:1583-1594.
21. Goddenhenrich T., Muller S., Heiden C. A lateral modulation technique for simultaneous friction and topography measurements with the atomic-force microscope. Rev. Sci. Instrum. 1994, 65:2870-2873.
22. Goodacre C.J., Kan J.Y.K., Rungcharassaeng K. Clinical complications of osseointegrated implants. J. Prosthet. Dent. 1999, 81:537-552.
23. Gotfredsen K., Berglundh T., Lindhe J. Bone reactions adjacent to titanium implants subjected to static load of different duration. A study in the dog (III). Clin. Oral. Implants Res. 2001, 12:552-558.
24. Haiat G., Barthel E. An approximate model for the adhesive contact of rough viscoelastic surfaces. Langmuir 2007, 23:11643-11650.
25. Haiat G., Huy M.C.P., Barthel E. The adhesive contact of viscoelastic spheres. J. Mech. Phys. Solids 2003, 51:69-99.
26. Jager J. Axisymmetrical bodies of equal material in contact under torsion or shift. Arch. Appl. Mech. 1995, 65:478-487.
27. Jinno T., Goldberg V.M., Davy D., Stevenson S. Osseointegration of surface-blasted implants made of titanium alloy and cobalt-chromium alloy in a rabbit intramedullary model. J. Biomed. Mater. Res. 1998, 42:20-29.
28. Johansson L., Peng F., Simonson R. Mechanical fiber separation under torsional stress. Wood Sci. Technol. 1999, 33:43-54.
29. Johnson K.L. Adhesion and friction between a smooth elastic spherical asperity and a plane surface. Proc. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci. 1997, 453:163-179.
30. Johnson K.L., Greenwood J.A. An adhesion map for the contact of elastic spheres. J. Colloid Interface Sci. 1997, 192:326-333.
31. Koester K.J., Barth H.D., Ritchie R.O. Effect of aging on the transverse toughness of human cortical bone: evaluation by R-curves. J. Mech. Behav. Biomed. Mater. 2011, 4:1504-1513.
32. Laugier P., Haiat G. Bone Quantitative Ultrasound 2011, Springer.
33. Marin C., Granato R., Suzuki M., Janal M.N., Gil J.N., Nemcovsky C., Bonfante E.A., Coelho P.G. Biomechanical and histomorphometric analysis of etched and non-etched resorbable blasting media processed implant surfaces: an experimental study in dogs. J. Mech. Behav. Biomed. Mater. 2010, 3:382-391.
34. Mathieu V., Anagnostou F., Soffer J.E., Haïat G. Ultrasonic evaluation of dental implant biomechanical stability: an in vitro study. Ultrasound Med. Bio. 2011, 37:262-270.
35. Mathieu V., Anagnostou F., Soffer J.E., Haïat G. Numerical simulation of ultrasonic wave propagation for the evaluation of dental implant biomechanical stability. J. Acoust. Soc. Am. 2011, 129:4062-4072.
36. Mathieu V., Fukui K., Matsukawa M., Kawabe M., Vayron R., Soffer E., Anagnostou F., Haiat G. Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant. J. Biomech. Eng. 2011, 133:021006-1-021006-6.
37. Mathieu, V., Vayron, R., Soffer, E., Anagnostou, F., Haïat, G., Influence of healing time on the elastic properties of a flat bone-implant interface. Ultrasound Med. Bio. (in press).
38. Maugis D. Adhesion of spheres-the Jkr-Dmt transition using a dugdale model. J. Colloid Interface Sci. 1992, 150:243-269.
39. Maugis, D., 1999. Contact, adhesion and rupture of elastic solids.
40. Maugis D. Frictionless Elastic Contact, Contact Adhesion and Rupture of Elastic Solids 2000, Springer, 236.
41. Miller M.A., Race A., Waanders D., Cleary R., Janssen D., Verdonschot N., Mann K.A. Multi-axial loading micromechanics of the cement-bone interface in postmortem retrievals and lab-prepared specimens. J. Mech. Behav. Biomed. Mater. 2011, 4:366-374.
42. Morais J.J.L., de Moura M., Pereira F.A.M., Xavier J., Dourado N., Dias M.I.R., Azevedo J.M.T. The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue. J. Mech. Behav. Biomed. Mater. 2010, 3:446-453.
43. Muller M., Hennig F.F., Hothorn T., Stangl R. Bone-implant interface shear modulus and ultimate stress in a transcortical rabbit model of open-pore Ti6Al4V implants. J. Biomech. 2006, 39:2123-2132.
44. Nakamura T., Yamamuro T., Higashi S., Kokubo T., Itoo S. A new glass-ceramic for bone replacement: evaluation of its bonding to bone tissue. J. Biomed. Mater. Res. 1985, 19:685-698.
45. O'Brien F.J., Taylor D., Lee T.C. An improved labelling technique for monitoring microcrack growth in compact bone. J. Biomech. 2002, 35:523-526.
46. O'Brien F.J., Taylor D., Lee T.C. Microcrack accumulation at different intervals during fatigue testing of compact bone. J. Biomech. 2003, 36:973-980.
47. Ogawa T., Ozawa S., Shih J.H., Ryu K.H., Sukotjo C., Yang J.M., Nishimura I. Biomechanical evaluation of osseous implants having different surface topographies in rats. J. Dent. Res. 2000, 79:1857-1863.
48. Ogiso M., Yamamura M., Kuo P.T., Borgese D., Matsumoto T. Comparative push-out test of dense HA implants and HA-coated implants: findings in a canine study. J. Biomed. Mater. Res. 1998, 39:364-372.
49. Orlik J., Zhurov A., Middleton J. On the secondary stability of coated cementless hip replacement: parameters that affected interface strength. Med. Eng. Phys. 2003, 25:825-831.
50. Pattijn V., Jaecques S.V.N., De Smet E., Muraru L., Van Lierde C., Van der Perre G., Naert I., Sloten J.V. Resonance frequency analysis of implants in the guinea pig model: influence of boundary conditions and orientation of the transducer. Med. Eng. Phys. 2007, 29:182-190.
51. Ronold H.J., Ellingsen J.E. Effect of micro-roughness produced by TiO2 blasting-tensile testing of bone attachment by using coin-shaped implants. Biomaterials 2002, 23:4211-4219.
52. Ronold H.J., Ellingsen J.E. The use of a coin shaped implant for direct in situ measurement of attachment strength for osseointegrating biomaterial surfaces. Biomaterials 2002, 23:2201-2209.
53. Ronold H.J., Ellingsen J.E., Lyngstadaas S.P. Tensile force testing of optimized coin-shaped titanium implant attachment kinetics in the rabbit tibiae. J. Mater. Sci. Mater. Med. 2003, 14:843-849.
54. Ronold H.J., Lyngstadaas S.P., Ellingsen J.E. Analysing the optimal value for titanium implant roughness in bone attachment using a tensile test. Biomaterials 2003, 24:4559-4564.
55. Ronold H.J., Lyngstadaas S.P., Ellingsen J.E. A study on the effect of dual blasting with Tio(2) on titanium implant surfaces on functional attachment in bone. J. Biomed. Mater. Res. Part A 2003, 67A:524-530.
56. Royer, D., Dieulesaint, E., 1996. Elastic waves in solids I: free and guided propagation.
57. Schwartz, Z., Nasazky, E., Boyan, B.D., 2005. Surface microtopography regulates osteointegration: the role of implant surface microtopography in osteointegration. Masson, Paris.
58. Seong W.J., Kim U.K., Swift J.Q., Hodges J.S., Ko C.C. Correlations between physical properties of Jawbone and dental implant initial stability. J. Prosthet Dent. 2009, 101:306-318.
59. Shalabi M.M., Gortemaker A., Van't Hof M.A., Jansen J.A., Creugers N.H. Implant surface roughness and bone healing: a systematic review. J. Dent. Res. 2006, 85:496-500.
60. Shirazi-Adl A. Finite element stress analysis of a push-out test. Part 1: fixed interface using stress compatible elements. J. Biomech. Eng. 1992, 114:111-118.
61. Skripitz R., Aspenberg P. Tensile bond between bone and titanium: a reappraisal of osseointegration. Acta Orthop. Scand. 1998, 69:315-319.
62. Skripitz R., Aspenberg P. Attachment of PMMA cement to bone: force measurements in rats. Biomaterials 1999, 20:351-356.
63. Soncini M., Baena R.R., Pietrabissa R., Quaglini V., Rizzo S., Zaffe D. Experimental procedure for the evaluation of the mechanical properties of the bone surrounding dental implants. Biomaterials 2002, 23:9-17.
64. Stoppie N., Van Oosterwyck H., Jansen J., Wolke J., Wevers M., Naert I. The influence of Young's modulus of loaded implants on bone remodeling: an experimental and numerical study in the goat knee. J. Biomed. Mater. Res. Part A 2008, 9:9.
65. Taborelli M., Jobin M., Francois P., Vaudaux P., Tonetti M., Szmukler-Moncler S., Simpson J.P., Descouts P. Influence of surface treatments developed for oral implants on the physical and biological properties of titanium. (I) surface characterization. Clin. Oral. Implants Res. 1997, 8:208-216.
66. Taylor D., O'Reilly P., Vallet L., Lee T.C. The fatigue strength of compact bone in torsion. J. Biomech. 2003, 36:1103-1109.
67. Vercaigne S., Wolke J.G., Naert I., Jansen J.A. Histomorphometrical and mechanical evaluation of titanium plasma-spray-coated implants placed in the cortical bone of goats. J. Biomed. Mater. Res. 1998, 41:41-48.
68. Younesi M., Bahrololoom M.E., Fooladfar H. Development of wear resistant NFSS-HA novel biocomposites and study of their tribological properties for orthopaedic applications. J. Mech. Behav. Biomed. Mater. 2010, 3:178-188.
69. Zimmermann E.A., Launey M.E., Barth H.D., Ritchie R.O. Mixed-mode fracture of human cortical bone. Biomaterials 2009, 30:5877-5884.
70. Zimmermann E.A., Launey M.E., Ritchie R.O. The significance of crack-resistance curves to the mixed-mode fracture toughness of human cortical bone. Biomaterials 2010, 31:5297-5305.