Characterization of Jatropha curcas L. Protein Cast Films with respect to Packaging Relevant Properties

International Journal of Polymer Science

Volumn 2015, Issue , 2015, Pages

  Gofferje, Gabriele ^a   Schmid, Markus ^a,b   Stäbler, Andreas ^a  

^a FRAUNHOFER INSTITUTE FOR PROCESS ENGINEERING AND PACKAGING IVV   (Germany)

^b TECHNICAL UNIVERSITY OF MUNICH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDING MATERIALS; COATINGS; DAIRIES; EXTRACTION; OILS AND FATS; PACKAGING; PETROLEUM INDUSTRY; ZEIN;

EXTRACTION AND PURIFICATIONS; JATROPHA SEED CAKES; MECHANICAL RESISTANCE; PACKAGING APPLICATIONS; SUSTAINABLE RAW MATERIALS; SUSTAINABLE UTILIZATION; WATER VAPOUR BARRIER; WHEY PROTEIN ISOLATE;

GAS PERMEABLE MEMBRANES;

EID: 84944265742     PISSN: 16879422     EISSN: 16879430     Source Type: Journal    
DOI: 10.1155/2015/630585     Document Type: Article

References (53)

1. K. Becker and H. Makkar, "Jatropha curcas: a potential source for tomorrow's oil and biodiesel, " Lipid Technology, vol. 20, no. 5, pp. 104-107, 2008.
2. J. Heller, Physic nut. Jatropha curcas L. Promoting the Conservation and Use of Underutilized and Neglected Crops, Institute of Plant Genetics and Crop Plant Research, Gatersleben, Germany; International Plant Genetic Resources Institute, Rome, Italy, 1996.
3. J. C. Juan, D. A. Kartika, T. Y. Wu, and T. Y. Hin, "Biodiesel production from jatropha oil by catalytic and non-catalytic approaches: an overview, " Bioresource Technology, vol. 102, no. 2, pp. 452-460, 2011.
4. N. Nazir, N. Ramli, D. Mangunwidjaja et al., "Extraction, transesterification and process control in biodiesel production from Jatropha curcas, " European Journal of Lipid Science and Technology, vol. 111, no. 12, pp. 1185-1200, 2009.
5. H. P. S. Makkar, K. Becker, F. Sporer, and M. Wink, "Studies on nutritive potential and toxic constituents of different provenances of Jatropha curcas, " Journal of Agricultural and Food Chemistry, vol. 45, no. 8, pp. 3152-3157, 1997.
6. M. Bonk, "Chancen fur die Nutzung pflanzlicher Proteine, " in Naturwissenschaftliche Rundschau, pp. 485-487, 1999.
7. R. K. Devappa and B. Swamylingappa, "Biochemical and nutritional evaluation of Jatropha protein isolate prepared by steam injection heating for reduction of toxic and antinutritional factors, " Journal of the Science of Food and Agriculture, vol. 88, no. 5, pp. 911-919, 2008.
8. H. P. S.Makkar, G. Francis, and K. Becker, "Protein concentrate from Jatropha curcas screw-pressed seed cake and toxic and antinutritional factors in protein concentrate, " Journal of the Science of Food and Agriculture, vol. 88, no. 9, pp. 1542-1548, 2008.
9. D. Saetae, T. Kleekayai, W. Suntornsuk, and V. Jayasena, "Functional properties of protein isolate obtained from physic nut (Jatropha curcas L.) seed cake, " Food Science and Biotechnology, vol. 20, no. 1, pp. 29-37, 2011.
10. P. R. Foster, P. Dunnill, and M. D. Lilly, "The kinetics of protein salting out: precipitation of yeast enzymes by ammonium sulfate, " Biotechnology and Bioengineering, vol. 18, no. 4, pp. 545-580, 1976.
11. A. A. Kozinski and E. N. Lightfoot, "Protein ultrafiltration: a general example of boundary layer filtration, " AIChE Journal, vol. 18, no. 5, pp. 1030-1040, 1972.
12. Y. F. Maa, P. Nguyen, J. D. Andya et al., "Effect of spray drying and subsequent processing conditions on residual moisture content and physical/biochemical stability of protein inhalation powders, " Pharmaceutical Research, vol. 15, no. 5, pp. 768-775, 1998.
13. B. Ersson, L. Rydén, and J.-C. Janson, "Introduction to protein purification, " in Protein Purification - Principles, High ResolutionMethods, and Applications, J.-C. Janson, Ed., pp. 3-21, John Wiley & Sons, New Jersey, NJ, USA, 2011.
14. R. K. Scopes, Protein Purification: Principles and Practise, Springer Science and Business Media, LLC, NewYork, NY, USA, 3rd edition, 1994.
15. J. E. Kinsella, "Functional properties of soy proteins, " Journal of the American Oil Chemists' Society, vol. 56, no. 3, pp. 242-258, 1979.
16. A. Moure, J. Sineiro, H. Domínguez, and J. C. Parajó, "Functionality of oilseed protein products: a review, " Food Research International, vol. 39, no. 9, pp. 945-963, 2006.
17. A. I. Hamarneh, H. J. Heeres, A. A. Broekhuis, and F. Picchioni, "Extraction of Jatropha curcas proteins and application in polyketone-based wood adhesives, " International Journal of Adhesion and Adhesives, vol. 30, no. 7, pp. 615-625, 2010.
18. D. Lestari, W. J. Mulder, and J. P. M. Sanders, "Jatropha seed protein functional properties for technical applications, " Biochemical Engineering Journal, vol. 53, no. 3, pp.297-304, 2011.
19. D. Saetae and W. Suntornsuk, "Toxic compound, antinutritional factors and functional properties of protein isolated from detoxified Jatropha curcas seed cake, " International Journal of Molecular Sciences, vol. 12, no. 1, pp. 66-77, 2011.
20. P. Gupta and K. K. Nayak, "Characteristics of protein-based biopolymer and its application, " Polymer Engineering & Science, 2014.
21. M. Schmid, K.Müller, S. Sängerlaub et al., "Mechanical and barrier properties of thermoplastic whey protein isolate/ethylene vinyl acetate blends, " Journal of Applied Polymer Science, 2014.
22. M. Schmid, B. Krimmel, U. Grupa, and K. Noller, "Effects of thermally induced denaturation on technological-functional properties of whey protein isolate based films, " Journal of Dairy Science, vol. 97, no. 9, pp. 5315-5327, 2014.
23. P. Cinelli, M. Schmid, E. Bugnicourt et al., "Whey protein layer applied on biodegradable packaging film to improve barrier properties whilemaintaining biodegradability, " Polymer Degradation and Stability, 2014.
24. M. Schmid, L. Hinz, F. Wild, and K. Noller, "Effects of hydrolysed whey proteins on the techno-functional characteristics of whey protein-based films, " Materials, vol. 6, no. 3, pp. 927-940, 2013.
25. M. Schmid, "Properties of cast films made from different ratios of whey protein isolate, hydrolysed whey protein Isolate and Glycerol, " Materials, vol. 6, no. 8, pp. 3254-3269, 2013.
26. E. Bugnicourt, M. Schmid, O.M. Nerney et al., "Processing and validation of whey-protein-coated films and laminates at semiindustrial scale as novel recyclable food packaging materials with excellent barrier properties, " Advances in Materials Science and Engineering, vol. 2013, Article ID 496207, 10 pages, 2013.
27. M. Schmid, K. Dallmann, E. Bugnicourt et al., "Properties of whey-protein-coated films and laminates as novel recyclable food packaging materials with excellent barrier properties, " International Journal of Polymer Science, vol. 2012, Article ID 562381, 7 pages, 2012.
28. M. Schmid, S. Sängerlaub, L.Wege, and A. Stäbler, Properties of Transglutaminase CrosslinkedWhey Protein Isolate Coatings and Cast Films, Packaging Technology and Science, 2014.
29. M. Schmid, K. Dallmann, E. Bugnicourt et al., "Properties of whey protein coated films and laminates as novel recyclable food packaging materials with excellent barrier properties, " International Journal of Polymer Science, vol. 2012, Article ID 562381, 7 pages, 2012.
30. T. H. McHugh, J. F. Aujard, and J. M. Krochta, "Plasticized whey-protein edible films: water-vapor permeability properties, " Journal of Food Science, vol. 59, no. 2, pp. 416-419, 1994.
31. R. Sothornvit and J. M. Krochta, "Oxygen permeability and mechanical properties of films from hydrolyzed whey protein, " Journal of Agricultural and Food Chemistry, vol. 48, no. 9, pp. 3913-3916, 2000.
32. M. B. Perez-gago and J. M. Krochta, "Denaturation time and temperature effects on solubility, tensile properties, and oxygen permeability of whey protein edible films, " Journal of Food Science, vol. 66, no. 5, pp. 705-710, 2001.
33. M. Schmid, K.Noller, F.Wild et al., "Whey protein coated films, " WO Patent 2, 013, 014, 493, 2013.
34. M. Schmid, F. Hammann, and H. Winkler, "Technofunctional properties of films made from ethylene vinyl acetate/whey protein isolate compounds, " Packaging Technology and Science, vol. 27, no. 7, pp. 521-533, 2014.
35. T. H. McHugh and J. M. Krochta, "Water vapor permeability properties of edible whey protein-lipid emulsion films, " Journal of the American Oil Chemists Society, vol. 71, no. 3, pp. 307-312, 1994.
36. M. B. Pérez-Gago and J. M. Krochta, "Water vapor permeability of whey protein emulsion films as affected by pH, " Journal of Food Science, vol. 64, no. 4, pp. 695-698, 1999.
37. S. Hong, J. H. Han, and J. M. Krochta, "Optical and Surface Properties ofWhey Protein Isolate Coatings on Plastic Films as Influenced by Substrate, Protein Concentration, and Plasticizer Type, " Journal of Applied Polymer Science, vol. 92, no. 1, pp. 335-343, 2004.
38. M. Schmid, "Whey protein-based coatings as sustainable barrier material in food packaging applications, " in Proceedings of the IAPRI World Packaging Conference, DEStech Publications, San Luis Obispo, Calif, USA, 2012.
39. K. L. Dangaran and J. M. Krochta, "Preventing the loss of tensile, barrier and appearance properties caused by plasticiser crystallisation in whey protein films, " International Journal of Food Science and Technology, vol. 42, no. 9, pp. 1094-1100, 2007.
40. V. M. Hernandez-Lzquierdo and J. M. Krochta, "Thermal transitions and heat-sealing of glycerol-plasticized whey protein films, " Packaging Technology and Science, vol. 22, no. 5, pp. 255-260, 2009.
41. S.-I. Hong and J. M. Krochta, "Oxygen barrier properties of whey protein isolate coatings on polypropylene films, " Journal of Food Science, vol. 68, no. 1, pp. 224-228, 2003.
42. S. Hong and J. M. Krochta, "Whey protein isolate coating on LDPE film as a novel oxygen barrier in the composite structure, " Packaging Technology and Science, vol. 17, no. 1, pp. 13-21, 2004.
43. S. Hong and J. M. Krochta, "Oxygen barrier performance of whey-protein-coated plastic films as affected by temperature, relative humidity, base film and protein type, " Journal of Food Engineering, vol. 77, no. 3, pp. 739-745, 2006.
44. S.-Y. Lin and J. M. Krochta, "Plasticizer effect on grease barrier and color properties of whey-protein coatings on paperboard, " Journal of Food Science, vol. 68, no. 1, pp. 229-233, 2003.
45. J. I. Maté and J. M. Krochta, "Comparison of oxygen and water vapor permeabilities of whey protein isolate and betalactoglobulin edible films, " Journal of Agricultural and Food Chemistry, vol. 44, no. 10, pp. 3001-3004, 1996.
46. T. H. McHugh and J. M. Krochta, "Sorbitol-vs glycerolplasticized whey protein edible films: integrated oxygen permeability and tensile property evaluation, " Journal of Agricultural and Food Chemistry, vol. 42, no. 4, pp. 841-845, 1994.
47. K. S. Miller, S. K. Upadhyaya, and J. M. Krochta, "Permeability of d-limonene in whey protein films, " Journal of Food Science, vol. 63, no. 2, pp. 244-247, 1998.
48. M. B. Pérez-Gago, P. Nadaud, and J. M. Krochta, "Water vapor permeability, solubility, and tensile properties of heatdenatured versus native whey protein films, " Journal of Food Science, vol. 64, no. 6, pp. 1034-1037, 1999.
49. R. Sothornvit and J.M. Krochta, "Water vapor permeability and solubility of films from hydrolyzed whey protein, " Journal of Food Science, vol. 65, no. 4, pp. 700-703, 2000.
50. AOAC, "Protein (crude) in animal feed, " in Official Methods of Analysis of the Association of Official Analytical Chemists, AOAC, 15th edition, 1990.
51. H. M. Lai and G. W. Padua, "Water vapor barrier properties of zein films plasticized with oleic acid, " Cereal Chemistry, vol. 75, no. 2, pp. 194-199, 1998.
52. M. Schmid, B. Krimmel, U. Grupa, and K. Noller, "Effects of thermally induced denaturation on technological-functional properties of whey protein isolate-based films, " Journal of Dairy Science, 2014.
53. C. J. R. Verbeek and L. E. Van Den Berg, "Extrusion processing and properties of protein-based thermoplastics, "Macromolecular Materials and Engineering, vol. 295, no. 1, pp. 10-21, 2010.