Towards greener machine tools - A review on energy saving strategies and technologies

Renewable and Sustainable Energy Reviews

Volumn 48, Issue , 2015, Pages 870-891

  Yoon, Hae Sung ^a   Kim, Eun Seob ^a   Kim, Min Soo ^a   Lee, Jang Yeob ^a   Lee, Gyu Bong ^b   Ahn, Sung Hoon ^a,c  

^a Seoul National University   (South Korea)

^b Korea Institute of Industrial Technology   (South Korea)

^c Seoul National University   (South Korea)

Author keywords

Efficiency; Energy consumption; Energy saving; Machine tool; Machining process

Indexed keywords

ECONOMICS; ENERGY EFFICIENCY; MACHINE COMPONENTS; MACHINE TOOLS; MACHINING; MANUFACTURE;

ENERGY; ENERGY SAVINGS; ENERGY EFFICIENT; ENERGY SAVINGS STRATEGIES; ENERGY SAVINGS TECHNOLOGIES; ENERGY-CONSUMPTION; ENERGY-SAVINGS; MACHINING PROCESS; MANUFACTURING SECTOR; WORLD ENERGY CONSUMPTION;

ENERGY UTILIZATION;

EID: 84938152138     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2015.03.100     Document Type: Review

References (154)

1. U.S. Energy Information Administration. International Energy Outlook 2013 [homepage on the Internet]. c2013 [updated 2013 June; cited 9.10.13]. Available from (http://www.eia.gov/forecasts/ieo/pdf/0484) (2013).pdf.
2. Renewable Energy Policy Network for the 21st Century (REN21). Global status report 2006-2013 [homepage on the Internet]. [cited 9.10.13]. Available from (http://www.ren21.net/REN21Activities/GlobalStatusReport.aspx).
3. C.-W. Park, K.-S. Kwon, W.-B. Kim, B.-K. Min, S.-J. Park, I.-H. Sung, and et al. Energy consumption reduction technology in manufacturing - a selective review of policies, standards, and research Int J Precis Eng Manuf 10 2009 151 173
4. 2 emission [homepage on the Internet]. c2007 [updated 2007 June; cited 09.10.13]. Available from (http://www.iea.org/publications/freepublications/publication/tracking-emissions.pdf).
5. International Energy Agency (IEA). Worldwide Trends in Energy use and efficiency - key insights from IEA indicator analysis [homepage on the Internet]. c2008 [cited 09.10.13]. Available from (http://www.iea.org/publications/freepublications/publication/Indicators-2008-1.pdf).
6. E.A. Abdelaziz, R. Saidur, and S. Mekhilef A review on energy saving strategies in industrial sector Renew Sustain Energy Rev 15 2011 150 168
7. T.A. Napp, A. Gambhir, T.P. Hills, N. Florin, and P.S. Fennell A review of the technologies, economics and policy instruments for decarbonizing energy-intensive manufacturing industries Renew Sustain Energy Rev 30 2014 616 640
8. K. Tanaka Assessment of energy efficiency performance measures in industry and their application for policy Energy Policy 36 2008 2887 2902
9. K. Tanaka Review of policies and measures for energy efficiency in industry sector Energy Policy 39 2011 6532 6550
10. A. Hasanbeigi, M. Arens, and L. Price Alternative emerging ironmaking technologies for energy-efficiency and carbon dioxide emissions reduction: a technical review Renew Sustain Rev 33 2014 654 658
11. Gardner Research. The world machine tool output & consumption survey 2013 [homepage on the Internet]. c2013 [updated 2013 February; cited 04.11.13]. Available from (https://www.gardnerweb.com/cdn/cms/uploadedFiles/2013wmtocs-SURVEY.pdf)
12. Cantonfair trading. The overview of the high-end Chinese machine tool market in 2012 [homepage on the Internet]. c2013 [updated 2013 July; cited 04.11.13]. Available from (http://www.cantonfairtrading.com/news/The-overview-of-the-high-end-Chinese-machine-tool-market-in-2012-256.html).
13. Fraunhofer IZM, Fraunhofer IPK Eco Machine tools task 3 report - user requirements [homepage on the Internet]. c2012 [Updated 2012 August; cited 09.10.13]. Available from (http://www.ecomachinetools.eu/typo/reports.html?file=tl-files/pdf/EuP-Lot5-Task3-August2012-FINAL.pdf).
14. Energy Software Tools for Sustainable Machine Design (ESToMaD). Task 3.3 design for energy efficiency [homepage on the Internet]. c2010 [updated 2010 September; cited 09.10.13]. Available from (http://www.estomad.org/documenten/Deliverable-D3-3.pdf)
15. Comité Européen de Coopération des Industries de la Machine-Outil (CECIMO). The eco design and CECIMO self-regulatory initiative [homepage on the Internet]. [cited 09.10.13]. Available from (http://www.cecimo.eu/site/publications/magazine/cecimo-self-regulatory-initiative/).
16. European Commission. Framework directive - ECODESIGN DIRECTIVE 2009/125/EC [homepage on the Internet]. c2009 [updated 2009 October; cited 09.10.13]. Available from (http://ec.europa.eu/enterprise/policies/sustainable-business/documents/eco-design/legislation/framework-directive/).
17. European Commission. Energy Labelling of Products -DIRECTIVE 2010/30/EU [homepage on the Internet]. c2010 [updated 2010 May; cited 09.10.13]. Available from (http://ec.europa.eu/energy/efficiency/labelling/labelling-en.htm).
18. European Commission. Energy Efficiency Directive - DIRECTIVE 2012/27/EU [homepage on the Internet]. c2012 [updated 2012 December; cited 22.07.14]. Available from (http://ec.europa.eu/energy/efficiency/eed/eed-en.htm).
19. Katholieke Universiteit Leuven. Cooperative effort on process emissions in manufacturing CO2PE! [homepage on the Internet] [cited 09.10.13]. Available from (http://www.co2pe.org/).
20. College International Pour la Recherche en Productique (CIRP). Collaborative Working Group EREE: energy and resource efficiency & effectiveness [homepage on the Internet]. c2009 [cited 09.10.13]. Available from (https://www.tu-braunschweig.de/iwf).
21. The White house. FACT SHEET: U.S.-China Joint Announcement on Climate Change and Clean Energy Cooperation [homepage on the Internet]. c2014 [cited 17.01.14]. Available from (http://www.whitehouse.gov/the-press-office/2014/11/11/fact-sheet-us-china-joint-announcement-climate-change-and-clean-energy-c).
22. Technische Universität Chemnitz. Energy-efficient product and process innovation in production technologies [homepage on the Internet]. c2013 [cited 09.10.13]. Available from (http://www.eniprod.tu-chemnitz.de/vision-ziele.php.en).
23. Fraunhofer IZM, Fraunhofer IPK. Eco machine tools [homepage on the Internet]. c2010 [cited 09.10.13]. Available from (http://www.ecomachinetools.eu/typo/home.html).
24. S. Kalpakjian, and S.R. Schmid Manufacturing processes for engineering materials 5th ed 2008 Pearson Education Singapore
25. The International Organization for Standardization. Standards [homepage on the Internet]. [cited 04.11.13]. Available from (http://www.iso.org/iso/home.html).
26. J.-W. Kim, H.-S. Yoon, and S.-H. Ahn Effect of repeated insertions into a mesoscale pinhole assembly: case of interference fit Int J Precis Eng Manuf 14 2013 1651 1654
27. J.C. Aurich, I.G. Reichenbach, and G.M. Schuler Manufacture and application of ultrasmall micro end mills CIRP Ann-Manuf Technol 61 2012 83 86
28. M.-H. Kim, H.-J. Kim, N. Kim, H.-S. Yoon, and S.-H. Ahn A rotational ablation tool for calcified atherosclerotic plaque removal Biomed Microdevices 13 2011 963 971
29. Fraunhofer IZM, Fraunhofer IPK. Eco Machine Tools Task 4 report - assessment of base case [homepage on the Internet]. c2012 [updated 2012 August; cited 16.09.13]. Available from (http://www.ecomachinetools.eu/typo/reports.html?file=tl-files/pdf/EuP-Lot5-Task4-Aug2012.pdf).
30. J.W. Kim, H.-S. Yoon, H.-S. Lee, K.-E. Lee, and S.-H. Ahn Defects of wave patterns from tungsten carbide/stainless steel brazed micro-end-milling for printed circuit board machining Proc Inst Mech Eng Part B: J Eng Manuf 227 2013 1743 1747
31. S. Kara, and W. Li Unit process energy consumption models for material removal processes CIRP Ann - Manuf Technol 60 2011 37 40
32. Q. Wang, F. Liu, and C. Li An integrated method for assessing the energy efficiency of machining workshop J Clean Prod 52 2013 122 133
33. A. Vijayaraghavan, and D. Dornfeld Automated energy monitoring of machine tools CIRP Ann - Manuf Technol 59 2010 21 24
34. J.R. Duflou, J.W. Sutherland, D. Dornfeld, C. Herrmann, J. Jeswiet, S. Kara, and et al. Towards energy and resource efficient manufacturing: a processes and systems approach CIRP Ann - Manuf Technol 61 2 2012 587 609
35. M. Jonsson, C. Andersson, and J.E. Stahl A general economic model for manufacturing cost simulation. In: Proceedings of the 41st CIRP conference on manufacturing systems, May 26-28, 2008. Tokyo, Japan 2008 Springer London 33
36. Statistics Korea (government). Status of Small and Medium Establishments (SMEs) (Korean) [homepage on the Internet]. c2013 [updated 2013 July; cited 09.10.13]. Available from (http://www.index.go.kr/egams/stts/jsp/potal/stts/PO-STTS-IdxMain.jsp?idx-cd=1181).
37. A. Zein, W. Li, C. Herrmann, and S. Kara Energy efficiency measures for the design and operation of machine tools: an axiomatic approach J. Hesselbach, C. Herrmann, Glocalized solutions for sustainability in manufacturing 2011 Springer Berlin, Heidelberg 274 279
38. D.A. Dornfeld Moving towards green and sustainable manufacturing Int J Precis Eng Manuf Technol - Green Technol 1 2014 63 66
39. Cho JH, Won JY, Ahn S-H, Yoon H-S, Lee JY, Kim M-S. Method for monitoring of cutting machine. South Korea patent file No. 10-2013-0104429. Hyundai WIA co. and Seoul National University R&DB; 2013
40. Z. Shan, S. Qin, Q. Liu, and F. Liu Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry Int J Precis Eng Manuf 13 2012 1095 1100
41. E. O'Driscoll, and G.E. O'Donnell Industrial power and energy metering - a state-of-the-art review J Clean Prod 41 2013 53 64
42. F. Apostolos, P. Alexios, P. Georgios, S. Panagiotis, and C. George Energy efficiency of manufacturing processes: a critical review Procedia CIRP 7 2013 628 633
43. W. Li, and S. Kara An empirical model for predicting energy consumption of manufacturing processes: a case of turning process Proc Inst Mech Eng Part B: J Eng Manuf 225 2011 1636 1646
44. R. Neugebauer, A. Schubert, B. Reichmann, and M. Dix Influence exerted by tool properties on the energy efficiency during drilling and turning operations CIRP J Manuf Sci Technol 4 2011 161 169
45. Y. He, F. Liu, T. Wu, F. Zhong, and B. Peng Analysis and estimation of energy consumption for numerical control machining Proc Inst Mech Eng Part B: J Eng Manuf 226 2012 255 266
46. K. Salonitis, and P. Ball Energy efficient manufacturing from machine tools to manufacturing systems Procedia CIRP 7 2013 634 639
47. H.-S. Yoon, J.-S. Moon, M.-Q. Pham, G.-B. Lee, and S.-H. Ahn Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs J Clean Prod 54 2013 41 48
48. W. Li, M. Winter, S. Kara, and C. Herrmann Eco-efficiency of manufacturing processes: a grinding case CIRP Ann - Manuf Technol 61 2012 59 62
49. C.L. William, and G.J. Plisga Standard handbook of petroleum & natural gas engineering 2004 Gulf Professional Publishing USA
50. J.R. Duflou, K. Kellens, Guo Y Renaldi, and W. Dewulf Critical comparison of methods to determine the energy input for discrete manufacturing processes CIRP Ann - Manuf Technol 61 2012 63 66
51. K. Kellens, W. Dewulf, M. Overcash, M. Hauschild, and J. Duflou Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI) - CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description Int J Life Cycle Assess 17 2012 69 78
52. M.F. Rajemi, P.T. Mativenga, and A. Aramcharoen Sustainable machining: selection of optimum turning conditions based on minimum energy considerations J Clean Prod 18 2010 1059 1065
53. V.A. Balogun, and P.T. Mativenga Modelling of direct energy requirements in mechanical machining processes J Clean Prod 41 2013 179 186
54. N. Diaz, K. Ninomiya, J. Noble, and D. Dornfeld Environmental impact characterization of milling and implications for potential energy savings in industry Procedia CIRP 1 2012 518 523
55. F. Draganescu, M. Gheorghe, and C.V. Doicin Models of machine tool efficiency and specific consumed energy J Mater Process Technol 141 2003 9 15
56. Y. Guo, J. Loenders, J. Duflou, and B. Lauwers Optimization of energy consumption and surface quality in finish turning Procedia CIRP 1 2012 512 517
57. L. Li, J. Yan, and Z. Xing Energy requirements evaluation of milling machines based on thermal equilibrium and empirical modelling J Clean Prod 52 2013 113 121
58. P.T. Mativenga, and M.F. Rajemi Calculation of optimum cutting parameters based on minimum energy footprint CIRP Ann - Manuf Technol 60 2011 149 152
59. S. Hu, F. Liu, Y. He, and T. Hu An on-line approach for energy efficiency monitoring of machine tools J Clean Prod 27 2012 133 140
60. N. Diaz, E. Redelsheimer, and D. Dornfeld Energy consumption characterization and reduction strategies for milling machine tool use J. Hesselbach, C. Herrmann, Glocalized solutions for sustainability in manufacturing 2011 Springer Berlin, Heidelberg 263 267
61. D.N. Kordonowy A power assessment of machining tools: Bachelor of Science in Mechanical Engineering 2002 Massachusetts Institute of Technology
62. Branham M, Gutowski TG, Jones A, Sekulic DP. A thermodynamic framework for analyzing and improving manufacturing processes. In: Proceedings of the 2008 IEEE international symposium on electronics and the environment, May 19-21, 2008. San Francisco, CA, USA. Washington, DC, USA: Institute of Electrical and Electronic Engineers (IEEE) Computer Society; p. 1-6.
63. H.-S. Yoon, J.-Y. Lee, M.-S. Kim, E.-S. Kim, and S.-H. Ahn Empirical study of the power efficiency of various machining processes Procedia CIRP 14 2014 558 563
64. H.-S. Yoon, R. Wu, T.-M. Lee, and S.-H. Ahn Geometric optimization of micro drills using Taguchi methods and response surface methodology Int J Precis Eng Manuf 12 2011 871 875
65. R.K. Bhushan Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites J Clean Prod 39 2013 242 254
66. S. Newman, A. Nassehi, R. Imani-Asrai, and V. Dhokia Energy efficient process planning for CNC machining CIRP J Manuf Sci Technol 5 2012 127 136
67. B.Y. Lee, and Y.S. Tarng Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations J Mater Process Technol 105 2000 61 66
68. G. Quintana, J. Ciurana, and J. Ribatallada Modelling power consumption in ball-end milling operations Mater Manuf Process 26 2011 746 756
69. S. Anderberg, S. Kara, and T. Beno Impact of energy efficiency on computer numerically controlled machining Proc Inst Mech Eng Part B: J Eng Manuf 224 2010 531 541
70. D. Kong, S. Choi, Y. Yasui, S. Pavanaskar, D. Dornfeld, and P. Wright Software-based tool path evaluation for environmental sustainability J Manuf Syst 30 2011 241 247
71. A. Rangarajan, and D. Dornfeld Efficient tool paths and part orientation for face milling CIRP Ann - Manuf Technol 53 2004 73 76
72. Y. Oda, M. Mori, K. Ogawa, S. Nishida, M. Fujishima, and T. Kawamura Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-workpiece inclination CIRP Ann - Manuf Technol 61 2012 119 122
73. C.-H. Chu, and D. Dornfeld Tool path planning for avoiding exit burrs J Manuf Process 2 2000 116 123
74. Moon J-S, Yoon H-S, Lee G-B, Ahn S-H. Evaluation of backstitch tool path strategy for stability and productivity in micro-drilling. In: Proceedings of International Mechanical Engineering Congress & Exposition (IMECE); November 9-15, 2012. Houston, TX, USA: ASME (American Society of Mechanical Engineers); 2012. 3(A). p.199-204.
75. M. Mori, M. Fujishima, Y. Inamasu, and Y. Oda A study on energy efficiency improvement for machine tools CIRP Ann - Manuf Technol 60 2011 145 148
76. E. Alkaya, and G.N. Demirer Greening of production in metal processing industry through process modifications and improved management practices Resour Conserv Recycl 77 2013 89 96
77. P. Eberspächera, and A. Verla Realizing energy reduction of machine tools through a control-integrated consumption graph-based optimization method Procedia CIRP 7 2013 640 645
78. O.I. Avram, and P. Xirouchakis Evaluating the use phase energy requirements of a machine tool system J Clean Prod 19 2011 699 711
79. H. Narita, H. Kawamura, T. Norihisa, L.-Y. Chen, H. Fujimoto, and T. Hasebe Development of prediction system for environmental burden for machine tool operation (1st report, proposal of calculation method for environmental burden) JSME Int J Ser C Mech Syst Mach Elem Manuf 49 2006 1188 1195
80. W. Lee, C. Lee, and B.-K. Min Simulation-based energy usage profiling of machine tool at the component level Int J Precis Eng Manuf Technol - Green Technol 1 2014 183 189
81. H.-S. Yoon, B. Bhandari, J.-S. Moon, C.-S. Kim, G.-B. Lee, K. Park, and et al. Energy analysis of micro-drilling process used to manufacture printed circuit boards D.A. Dornfeld, B.S. Linke, Leveraging technology for a sustainable world 2012 Springer Berlin, Heidelberg 305 309
82. H.-S. Yoon, J.-Y. Lee, M.-S. Kim, and S.-H. Ahn Empirical power-consumption model for material removal in three-axis milling J Clean Prod 78 2014 54 62
83. J.-S. Moon, H.-S. Yoon, G.-B. Lee, and S.-H. Ahn Effect of backstitch tool path on micro-drilling of printed circuit board Precis Eng 38 2014 691 696
84. R.S. Lee, and S.P. Liang A strain energy minimization method for generating continuous NURBS-based motion curves in free-form surface machining Int J Adv Manuf Technol 28 2006 1136 1145
85. Gutowski T, Dahmus J, Thiriez A. Electrical energy requirements for manufacturing processes. In: Proceedings of the 13th CIRP international conference on life cycle engineering; May 31-June 2, 2006. Leuven, Belgium: The International Academy for Production Engineering (CIRP); p. 560-4.
86. D. Dornfeld, S. Min, and Y. Takeuchi Recent advances in mechanical micromachining CIRP Ann - Manuf Technol 55 2 2006 745 768
87. H.-S. Yoon, J.-Y. Lee, H.-S. Kim, M.-S. Kim, E.-S. Kim, Y.-J. Shin, and et al. A comparison of energy consumption in bulk forming, subtractive, and additive processes: review and case study Int J Precis Eng Manuf Technol - Green Technol 1 2014 261 279
88. M. Helu, B. Behmann, H. Meier, D. Dornfeld, G. Lanza, and V. Schulze Impact of green machining strategies on achieved surface quality CIRP Ann - Manuf Technol 61 2012 55 58
89. R. Neugebauer, W. Drossel, R. Wertheim, C. Hochmuth, and M. Dix Resource and energy efficiency in machining using high-performance and hybrid processes Procedia CIRP 1 2012 3 16
90. B. Rao Methodology for adapting metal cutting to a green economy Proc Inst Mech Eng Part B: J Eng Manuf 224 2010 1193 1205
91. E.M. Trent, and P.K. Wright Metal cutting 4th ed. 2000 Butterworth-Heinemann Massachusetts
92. J. Kim, S. Min, and D.A. Dornfeld Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts Int J Mach Tools Manuf 41 2001 923 936
93. B. Bhandari, Y.-S. Hong, H.-S. Yoon, J.-S. Moon, M.-Q. Pham, G.-B. Lee, and et al. Development of a micro-drilling burr-control chart for PCB drilling Precis Eng 38 2014 221 229
94. K. Bunse, M. Vodicka, P. Schönsleben, M. Brülhart, and F.O. Ernst Integrating energy efficiency performance in production management - gap analysis between industrial needs and scientific literature J Clean Prod 19 2011 667 679
95. Tampus V. Energy-saving tactics for machine tools [homepage on the Internet]. c2013 [updated 2013 March; cited 09.10.13]. Available from (http://www.sme.org/MEMagazine/Article.aspx?id=71489&taxid=1433)
96. B. Al-Najjar, and I. Alsyouf Improving effectiveness of manufacturing systems using total quality maintenance Integr Manuf Syst 11 2000 267 276
97. M. Dörr, S. Wahren, and T. Bauernhansl Methodology for energy efficiency on process level Procedia CIRP 7 2013 652 657
98. C.-H. Hwang, and AC-H. Wu A predictive system shutdown method for energy saving of event-driven computation ACM Trans Des Autom Electron Syst 5 2000 226 241
99. Z. Bi, and L. Wang Energy modeling of machine tools for optimization of machine setups IEEE Trans Autom Sci Eng 9 2012 607 613
100. Kim J-Y, Choi J-W, Choi K. Design of automatic energy saving-monitor for reducing the waste of PC electricity. In: Proceedings of the IEEE 7th International Conference on Networked Computing (INC), September 26-28, 2011. Gumi, Korea: Institute of Electrical and Electronics Engineers (IEEE); p. 28-31.
101. G. Papagiannis, A. Dagoumas, N. Lettas, and P. Dokopoulos Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level Energy Policy 36 2008 163 180
102. U. Götze, H.J. Koriath, A. Kolesnikov, R. Lindner, and J. Paetzold Integrated methodology for the evaluation of the energy- and cost-effectiveness of machine tools CIRP J Manuf Sci Technol 5 2012 151 163
103. Heidenhain Corporation. Aspects of energy efficiency in machine tools [homepage on the Internet]. c2010 [updated 2010 November; cited 09.10.13]. Available from (http://www.heidenhain.com/en-US/fundamentals/aspects-of-energy-efficiency-in-machine-tools/).
104. J.S. Park Motion profile planning of repetitive point-to-point control for maximum energy conversion efficiency under acceleration conditions Mechatronics 6 1996 649 663
105. D. Fratila Evaluation of near-dry machining effects on gear milling process efficiency J Clean Prod 17 2009 839 845
106. D. Fratila Macro-level environmental comparison of near-dry machining and flood machining J Clean Prod 18 2010 1031 1039
107. N. Suresh Kumar Reddy, M. Nouari, and M. Yang Development of electrostatic solid lubrication system for improvement in machining process performance Int J Mach Tools Manuf 50 2010 789 797
108. Suresh Kumar, N. Reddy, and P. Venkateswara Rao Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling Int J Mach Tools Manuf 46 2006 189 198
109. V. Khare, M.-Q. Pham, N. Kumari, H.-S. Yoon, C.-S. Kim, J.-I. Park, and et al. Graphene-ionic liquid based hybrid nanomaterials as novel lubricant for low friction and wear ACS Appl Mater Interfaces 5 2013 4063 4075
110. G. Germain, P. Dal Santo, and J.L. Lebrun Comprehension of chip formation in laser assisted machining Int J Mach Tools Manuf 51 2011 230 238
111. R.A. Rahman Rashid, S. Sun, G. Wang, and M.S. Dargusch The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining Int J Mach Tools Manuf 63 2012 41 43
112. F. Apostolos, S. Panagiotis, S. Konstantinos, and C. George Energy efficiency assessment of laser drilling process Phys Procedia 39 2012 776 783
113. F. Zhao, W.Z. Bernstein, G. Naik, and G.J. Cheng Environmental assessment of laser assisted manufacturing: case studies on laser shock peening and laser assisted turning J Clean Prod 18 2010 1311 1319
114. S. Skvarenina, and Y.C. Shin Laser-assisted machining of compacted graphite iron Int J Mach Tools Manuf 46 2006 7 17
115. P.A. Rebro, Y.C. Shin, and F.P. Incropera Design of operating conditions for crackfree laser-assisted machining of mullite Int J Mach Tools Manuf 44 2004 677 694
116. R. Bejjani, B. Shi, H. Attia, and M. Balazinski Laser assisted turning of titanium metal matrix composite CIRP Ann - Manuf Technol 60 2011 61 64
117. M. Anderson, R. Patwa, and Y.C. Shin Laser-assisted machining of Inconel 718 with an economic analysis Int J Mach Tools Manuf 46 2006 1879 1891
118. F.E. Pfefferkorn, Y.C. Shin, T. YINGGANG, and F.P. Incropera Laser-assisted machining of magnesia-partially-stabilized zirconia J Manuf Sci Eng 126 2004 42 51
119. G.A. Volkov, V.A. Bratov, A.A. Gruzdkov, V.I. Babitsky, Y.V. Petrov, and V.V. Silberschmidt Energy-based analysis of ultrasonically assisted turning Shock Vib 18 2011 333 341
120. F. Pusavec, P. Krajnik, and J. Kopac Transitioning to sustainable production - Part I: application on machining technologies J Clean Prod 18 2010 174 184
121. Lee J-Y, Kim M-S, Yoon H-S, Lee J-C, Moon J-S, Ahn S-H. Control of cutting parameters using relative vibration of milling tool to workpiece for chatter prediction. In: International Symposium on Green Manufacturing and Application (ISGMA 2013); June 25-29, 2013. Ohau, Hawaii, USA.
122. K. Weinert, I. Inasaki, J.W. Sutherland, and T. Wakabayashi Dry machining and minimum quantity lubrication CIRP Ann - Manuf Technol 53 2004 511 537
123. H. Yoshimura, F. Itoigawa, T. Nakamura, and K. Niwa Development of nozzle system for oil-on-water droplet metalworking fluid and its application to practical production line JSME Int J Ser C Mech Syst Mach Elem Manuf 48 2005 723 729
124. X. Liu, F. Zhou, Y. Liang, and W. Liu Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism Wear 261 2006 1174 1179
125. M.-Q. Pham, H.-S. Yoon, V. Khare, and S.-H. Ahn Evaluation of ionic liquids as lubricants in micro milling - process capability and sustainability J Clean Prod 76 2014 167 173
126. C. Donnet, and A. Erdemir Historical developments and new trends in tribological and solid lubricant coatings Surf Coat Technol 180-181 2004 76 84
127. C.R. Dandekar, Y.C. Shin, and J. Barnes Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining Int J Mach Tools Manuf 50 2010 174 182
128. S. Sun, M. Brandt, and M.S. Dargusch Thermally enhanced machining of hard-to-machine materials - a review Int J Mach Tools Manuf 50 2010 663 680
129. H.E. Cline, and T.R. Anthony Heat treating and melting materials with a scanning laser or electron beam J Appl Phys 48 1977 3895 3900
130. G. Chryssolouris, N. Anifantis, and S. Karagiannis Laser assisted machining: an overview J Manuf Sci Eng 119 1997 766 768
131. F.E. Pfefferkorn, S. Lei, Y. Jeon, and G. Haddad A metric for defining the energy efficiency of thermally assisted machining Int J Mach Tools Manuf 49 2009 357 365
132. F. Pusavec, D. Kramar, P. Krajnik, and J. Kopac Transitioning to sustainable production - part II: evaluation of sustainable machining technologies J Clean Prod 18 2010 1211 1221
133. R. Saidur, N.A. Rahim, and M. Hasanuzzaman A review on compressed-air energy use and energy savings Renew Sustain Energy Rev 14 2010 1135 1153
134. European Commission. Eco-design of Energy-Related Products [homepage on the Internet]. c2009 [updated 2009 October; cited 09.10.13]. Available from (http://ec.europa.eu/energy/efficiency/index-en.htm).
135. A.G.P. Garcia, A.S. Szklo, R. Schaeffer, and M.A. McNeil Energy-efficiency standards for electric motors in Brazilian industry Energy Policy 35 2007 3424 3439
136. A.T. de Almeida, P. Fonseca, and P. Bertoldi Energy-efficient motor systems in the industrial and in the services sectors in the European Union: characterisation, potentials, barriers and policies Energy 28 2003 673 690
137. E. Abele, T. Sielaff, A. Schiffler, and S. Rothenbücher Analyzing energy consumption of machine tool spindle units and identification of potential for improvements of efficiency. Glocalized solutions for sustainability in manufacturing 2011 Springer Berlin, Heidelberg 280 285
138. R. Saidur A review on electrical motors energy use and energy savings Renew Sustain Energy Rev 14 2010 877 898
139. US Department of Energy. Energy conservation program: energy conservation standards for small electric motors final rule TSD. Market and technology assessment [homepage on the Internet]. c2010 [updated 2010 March; cited 09.10.13] [chapter 3]. Available from (https://www1.eere.energy.gov/buildings/appliance-standards/commercial/pdfs/smallmotors-tsd/sem-finalrule-ch3.pdf).
140. S. Hu, F. Liu, Y. He, and B. Peng Characteristics of additional load losses of spindle system of machine tools J Adv Mech Des Syst Manuf 4 2010 1221 1233
141. C.T. Raj, S. Srivastava, and P. Agarwal Energy efficient control of three-phase induction motor - a review Int J Comput Electr Eng 1 2009 1793 8198
142. R. Saidur, S. Mekhilef, M.B. Ali, A. Safari, and H.A. Mohammed Applications of variable speed drive (VSD) in electrical motors energy savings Renew Sustain Energy Rev 16 2012 543 550
143. R. Saidur, and S. Mekhilef Energy use, energy savings and emission analysis in the Malaysian rubber producing industries Appl Energy 87 2010 2746 2758
144. W. Li, A. Zein, S. Kara, and C. Herrmann An investigation into fixed energy consumption of machine tools. Glocalized solutions for sustainability in manufacturing 2011 Springer Berlin, Heidelberg 268 273
145. Diaz N, Helu M, Jarvis A, Tönissen S, Dornfeld D, Schlosser R. Strategies for minimum energy operation for precision machining. In: Proceedings of the Machine Tool Technologies Research Foundation (MTTRF) annual meeting 2009; July 8-9, 2009. Shanghai, China.
146. Fraunhofer IZM, Fraunhofer IPK. Eco Machine Tools Task 5 report - machine tools and related machinery [homepage on the Internet]. c2012 [updated 2012 August; cited 09.10.13]. Available from (http://www.ecomachinetools.eu/typo/reports.html?file=tl-files/pdf/EuP-Lot5-Task5-August2012-Approved-FINAL.pdf).
147. European Institute for Prospective Technological Studies (IPTS). Reference document on best avilable techniques for energy efficiency [homepage on the Internet]. c2009 [updated 2009 February; cited 09.10.13]. Available from (http://eippcb.jrc.ec.europa.eu/reference/BREF/ENE-Adopted-02-2009.pdf).
148. Bosh Rexroth US. Energy efficiency in machine tools - Presentation [homepage on the Internet]. [cited 09.10.13]. Available from (http://www.boschrexroth-us.com/country-units/america/united
149. E.L.J. Bohez Five-axis milling machine tool kinematic chain design and analysis Int J Mach Tools Manuf 42 2002 505 520
150. L. Kroll, P. Blau, M. Wabner, U. Frieß, J. Eulitz, and M. Klärner Lightweight components for energy-efficient machine tools CIRP J Manuf Sci Technol 4 2011 148 160
151. R. Neugebauer, M. Wabner, H. Rentzsch, and S. Ihlenfeldt Structure principles of energy efficient machine tools CIRP J Manuf Sci Technol 4 2011 136 147
152. T. Kurita, and M. Hattori Development of new-concept desk top size machine tool Int J Mach Tools Manuf 45 2005 959 965
153. J. Liow Mechanical micromachining: a sustainable micro-device manufacturing approach? J Clean Prod 17 2009 662 667
154. E. Abele, Y. Altintas, and C. Brecher Machine tool spindle units CIRP Ann - Manuf Technol 59 2010 781 802