Development of electrostatic solid lubrication system for improvement in machining process performance

International Journal of Machine Tools and Manufacture

Volumn 50, Issue 9, 2010, Pages 789-797

  Reddy, Narala Suresh Kumar ^a   Nouari, Mohammed ^a   Yang, Minyang ^b  

^a NANCY UNIVERSITÉ   (France)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Drilling; Electrostatic solid lubrication; Graphite; Thrust force; Tool wear

Indexed keywords

AISI 4340 STEEL; APPLICATION METHOD; CHIP THICKNESS; CONVENTIONAL COOLANTS; CUTTING ZONE; EMPLOYEE HEALTH; ENVIRONMENTAL POLLUTIONS; ENVIRONMENTAL REQUIREMENT; EXPERIMENTAL SETUP; HIGH VELOCITY JET; HOLE DIAMETER; LIQUID LUBRICANTS; LOW COSTS; LOW FLOW; MACHINING PROCESS; NOVEL CONCEPT; PROCESS PERFORMANCE; SOLID LUBRICANT ASSISTED MACHINING; SOLID LUBRICATION; SURFACE FINISHES; THRUST FORCES; TOOL WEAR; WET AND DRY; WORK PIECES; ZONE TEMPERATURE;

COOLANTS; CUTTING FLUIDS; ELECTRIC FURNACES; ELECTROSTATICS; FUZZY CONTROL; GRAPHITE; LEAD; LUBRICATION; MACHINING; OPTIMIZATION; POLLUTION CONTROL; WEAR OF MATERIALS;

SOLID LUBRICANTS;

EID: 77955320558     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2010.05.007     Document Type: Article

References (20)

1. H.K. Tonshoff, and E. Brinkomeier Determination of the mechanical and thermal influences on machined surface by microhardness and residual stress analysis Annals of CIRP 29 2 1986 519 532
2. P. Leskover, and J. Grum The metallurgical aspect of machining Annals of CIRP 35 1 1986 537 550
3. F. Klocke, and G. Eisennbltter Dry cutting Annals of CIRP 46 2 1997 519 526
4. G. Byrne, and E. Scholta Environmentally clean machining processesa strategic approach Annals of CIRP 42 1 1993 471 474
5. Anselmo Eduardo Diniz, and Adilson Jos de Oliveira Optimizing the use of dry cutting in rough turning steel operations International Journal of Machine Tools & Manufacture 44 10 2004 1061 1067
6. P.S. Sreejith, and B.K.A. Ngoi Dry machining: machining of the future Journal of Materials Processing Technology 101 2000 287 291
7. A. Attanasio, M. Gelfi, C. Giardini, and C. Remino Minimal quantity lubrication in turning: effect on tool wear Wear 260 2006 333 338
8. C.H. Vikram, R. Kumar, and B. Ramamoorthy Performance of coated tools during hard turning under minimum fluid application Journal of Materials Processing Technology 185 2007 210 216
9. X.C. Tan, F. Liu, H.J. Cao, and H. Zhang A decision-making framework model of cutting fluid selection for green manufacturing and a case study International Journal of Machine Tools & Manufacture 129 2002 467 470
10. D. Nageswara Rao, and P. Vamsi Krishna The influence of solid lubricant particle size on machining parameters in turning International Journal of Machine Tools & Manufacture 48 2008 107 111
11. Alberts Matthew, Kalaitzidou Kyriaki, and Melkote Shreyes An investigation of graphite nanoplatelets as lubricant in grinding International Journal of Machine Tools & Manufacture 48 1213 2008 966 970
12. A. Venu Gopal, and P. Venkateswara Rao Performance improvement of grinding of SiC using graphite as a solid lubricant Materials and Manufacturing Processes 19 2 2004 177 186
13. G.S. Lathkar, U.S.K. Bas, Clean metal cutting process using solid lubricants, In: Proceedings of the 19th AIMTDR Conference, Narosa Publishing House, IIT Madras, 2000, pp. 1531.
14. Dilbagh Singh, and P.V. Rao Performance improvement of hard turning with solid lubricants International Journal of Advance Manufacturing Technology 38 2008 529 535
15. P. Vamsi Krishna, and D. Nageswara Rao Performance evaluation of solid lubricants in terms of machining parameters in turning International Journal of Machine Tools & Manufacture 48 2008 1131 1137
16. 2 additions in dry cutting International Journal of Machine Tools & Manufacture 46 9 2006 957 963
17. D. Mukhopadhyay, S. Banerjee, and N Suresh Kumar Reddy Investigation to study the application of solid lubricant in turning AISI 1040 steel Transactions of the ASME Journal of Manufacturing Science and Engineering 129 2007 520 526
18. N.Suresh Kumar Reddy, and P.V. Rao Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling International Journal of Machine Tools & Manufacture 46 2006 189 198
19. S. Shaji, and V. Radhakrishnan An investigation on solid lubricant moulded grinding wheels International Journal of Machine Tools & Manufacture 43 9 2003 965 972
20. S. Shaji, and V. Radhakrishnan An investigation on surface grinding using graphite as lubricant International Journal of Machine Tools & Manufacture 42 6 2002 733 740