Energy modeling of machine tools for optimization of machine setups

IEEE Transactions on Automation Science and Engineering

Volumn 9, Issue 3, 2012, Pages 607-613

  Bi, Z M ^a   Wang, Lihui ^b  

^a INDIANA UNIVERSITY PURDUE UNIVERSITY FORT WAYNE   (United States)

^b UNIVERSITY OF SKÖVDE   (Sweden)

Author keywords

Dynamics; energy modeling; green manufacturing; kinematics; metrics; optimization; parallel kinematic machine

Indexed keywords

AIRCRAFT COMPONENTS; DESIGN VARIABLES; DRILLING OPERATION; DYNAMIC BEHAVIORS; ENERGY MODEL; ENERGY MODELING; GREEN MANUFACTURING; MACHINE SETUP; MANUFACTURING PROCESS; METRICS; MODELING PROCEDURE; PARALLEL KINEMATIC MACHINES; PROCESS PARAMETERS; SUSTAINABLE MANUFACTURING;

DYNAMICS; ENERGY UTILIZATION; FLEXIBLE MANUFACTURING SYSTEMS; KINEMATICS; MACHINE TOOLS; OPTIMIZATION;

COMPUTER SIMULATION;

EID: 84863452951     PISSN: 15455955     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASE.2012.2195173     Document Type: Article

References (40)

1. B. M. Kramer, Support for Sustainable Manufacturing at the NSF, 2010. [Online]. Available: http://web.mit.edu/lmp/news/summit2010/kramer.pdf
2. S. A. Melnyk and R. T. Smith, "Green manufacturing," Soc. Manuf. Eng., pp. 1-25, 1996.
3. C.-W. Park, K.-S. Kwon, W.-B. Kwon, S.-J. Park, S.-Y. Yoon, K.-S. Lee, J.-H. Lee, and J. Seok, "Energy consumption reduction technology in manufacturing-A selective review of policies, standards, and research," Int. J. Precision Eng. Manuf., vol. 10, no. 5, pp. 151-173, 2009.
4. S. Kara and Q. Li, "Unit process energy consumption models for material removal processes," CIRP Ann.-Manuf. Technol., vol. 66, pp. 37-40, 2011.
5. M. F. Rajemi, P. T. Mativenga, and A. Aramcharoen, "Sustainable machining: Selection of optimum turning conditions based on minimum energy considerations," J. Cleaner Prod., vol. 18, pp. 1059-1065, 2010.
6. S. E. Anderberg, S. Kara, and T. Beno, "Impact of energy efficiency on computer numerically controlled machining," Proc. Inst. Mech. Eng., Part B, J. Eng. Manuf., vol. 224, no. 4, pp. 531-541, 2010.
7. A. E. Santo, M. R. A. Calado, and C. M. P. Cabrita, "Dynamic simulation of electromagnetic actuators based on the co-energy map," ACES Journal, vol. 25, no. 12, pp. 1118-1128, 2010.
8. J. Jeswiet and S. Kara, "Carbon emissions and CES in manufacturing," CIRP Ann.-Manuf. Technol., vol. 57, pp. 17-20, 2008.
9. F. Roman and B. Bras, "Toward environmental burden modelling of industrial cleaning processes for metal parts," Trans. North American Manuf. Res. Inst. SME, vol. 34, pp. 415-422, 2006.
10. F. E. Pfefferkorn, S. Lei, Y. Jeon, and G. Haddad, "A metric for defining the energy efficiency of thermally assisted machining," Int. J. Mach. Tools Manuf., vol. 49, pp. 357-365, 2009.
11. G. Quintana, J. Ciurana, and J. Ribatallada, "Modeling power consumption in ball-end milling operations," Mater. Manuf. Process., vol. 26, no. 5, pp. 746-756, 2011.
12. W. Li and S. Kara, "An empirical model for predicting energy consumption of manufacturing processes:Acase of turning process," Proc. IMechE, Part B: J. Eng. Manuf., vol. 225, pp. 1636-1646, 2011.
13. O. Avram, I. Stroud, and P. Xirouchakis, "A multi-criteria decision method for sustainability assessment of the use phase of machine tool systems," Int. J. Adv. Manuf. Technol., vol. 53, pp. 811-828, 2011.
14. J. L. Liow, "Mechanical micromachining: A sustainable micro-device manufacturing approach," J. Cleaner Prod., vol. 17, no. 7, pp. 662-667, 2009.
15. Y. Altintas and Y. Cao, "Virtual design and optimization of machine tool spindles," CIRP Ann.-Manuf. Technol., vol. 54, no. 1, pp. 379-382, 2005.
16. Y. Cao and Y. Altintas, "Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations," Int. J. Mach. Tools Manuf., vol. 47, pp. 1342-1350, 2007.
17. J. J. Zulaika, F. J. Campa, L. N. Lopez, and de Lacalle, "An integrated process-machine approach for designing productive and lightweight milling machines," Int. J. Mach. Tools Manuf., vol. 51, pp. 591-604, 2011.
18. G. L. Yang and I.-M. Chen, "Task-based optimization of modular robot configurations: Minimized degree-of-freedom approach," Mech. Mach. Theory, vol. 35, no. 4, pp. 517-540, 2000.
19. Z. M. Bi and W. J. Zhang, "Concurrent optimal design of modular robotic configuration," J. Robot. Syst., vol. 18, no. 20, pp. 77-87, 2001.
20. D. P. Gray and M. Kumar, "Optimization techniques applied to multiple manipulators for path planning and torque minimization," Eng. Appl. Artif. Intell., vol. 15, pp. 241-252, 2002.
21. R. UR-Rehman, S. Caro, D. Chablat, and P. Wenger, "Multi-objective path optimization of parallel kinematics machines based on energy consumption, shaking forces and maximum actuators torques: Application to the orthoglide," Mech. Mach. Theory, vol. 45, no. 8, pp. 1125-1141, 2011.
22. A. M. Lopes and E. J. S. Pires, "Optimization of the workpiece location in a machining robotic cell," Int. J. Adv. Robot. Syst., vol. 8, no. 6, pp. 37-46, 2011.
23. R. Balasubramanian and T. R. Balch, "Energy optimal trajectories for overactuatued robots" Carnegie Mellon Univ., Pittsburgh, PA, Tech. Rep., CMU-RI-TR-02-17, 2002, .
24. A. Smetanova, "Optimization of energy by robot movement," MM Sci. J., pp. 171-175, Mar. 2010.
25. H. Narita, K. Shirase, E. Arai, K. Nakamoto, L.-Y. Chen, and H. Fujimoto, "Proposal of a concept of future oriented machines tools for advanced manufacturing systems," Int. J. Prod. Res., vol. 42, no. 17, pp. 3657-3673, 2004.
26. H. Narita, K. Shirase, H.Wakamatsu, A. Tsumaya, and E. Arai, "Realtime cutting simulation system of a milling operation for autonomous and intelligent machine tools," Int. J. Prod. Res., vol. 40, no. 15, pp. 2805-3791, 2002.
27. H. Narita, L.-Y. Chen, H. Fujimoto, K. Shirase, and E. Arai, "Trial-less machining using virtual machining simulator for ball end mill operation," JSME Int. J. Series C, vol. 49, no. 1, pp. 50-55, 2006.
28. H. Narita, H. Kawamura, T. Norihisa, L.-Y. Chen, H. Fujimoto, and T. Hasebe, "Development of prediction system for environment burden for machine tool operation," JSME Int. J. Series C, vol. 49, no. 4, pp. 1188-1195, 2006.
29. J. P. Santos, M. Oliveira, F. G. Almeida, J. P. Pereira, and A. Reis, "Improving the environmental performance of machine-tools: Influence of technology and throughput on the electrical energy consumption of a press-brake," J. Cleaner Prod., vol. 19, pp. 356-364, 2011.
30. F. Draganescu, M. Gheorghe, and C. V. Doicin, "Models of machine tool efficiency and specific consumed energy," J. Mater. Process. Technol., vol. 141, pp. 9-15, 2003.
31. N. Diaz, M. Helu, A. Jarvis, S. Tonissen, D. Dornfeld, and R. Schlosser, "Strategies for minimum energy operation for precision machining," in Proc. MTTRF 2009 Annu. Meet., 2009, pp. 47-50.
32. R. S. Lee and S. P. Liang, "A strain energy minimization method for generating continuous NURBS-based motion curves in free-form surface machining," Int. J. Adv. Manuf. Technol., vol. 28, pp. 1136-1145, 2006.
33. Z. M. Bi, S. Y. T. Lang, P. Orban, and M.Verner, "An integrated design toolbox for tripod-based parallel kinematic machines," ASME J. Mech. Design, vol. 129, no. 8, pp. 799-807, 2007.
34. Z. M. Bi, L.Wang, and S. Y. T. Lang, "Current status of reconfigurable assembly systems," Int. J. Manuf. Res., vol. 2, no. 3, pp. 303-327, 2007.
35. Exechon AB,, 2011. [Online]. Available: http://www.exechon.com/
36. Applications in Aerospace, Auto, and Other Industries, ExechonWorld, 2009 [Online].Available: http://exechonworld.com/document/200902/article88.htm
37. Z. M. Bi and Y. Jin, "Kinematic modelling of parallel kinematic machine Exechon," Robot. Comput.-Integr. Manuf., vol. 27, no. 1, pp. 186-193, 2011.
38. O. Ibrahim and W. Khalil, "Inverse and dynamic models of hybrid robots," Mech. Mach. Theory, vol. 45, no. 4, pp. 627-640, 2010.
39. Y. J. Zhang and F. Gao, "Dynamic formulation and performance evaluation of the redundant parallel manipulator," Robot. Comput.-Integr. Manuf., vol. 25, no. 4, pp. 770-781, 2009.
40. M. Pirtini and I. Lazoglu, "Forces and hole quality in drilling," Int. J. Mach. Tools & Manuf., vol. 45, pp. 1271-1281, 2005.