Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs

Journal of Cleaner Production

Volumn 54, Issue , 2013, Pages 41-48

  Yoon, Hae Sung ^a   Moon, Jong Seol ^a   Pham, Minh Quan ^a   Lee, Gyu Bong ^b   Ahn, Sung Hoon ^a,c  

^a Seoul National University   (South Korea)

^b Korea Institute of Industrial Technology ^*  (South Korea)

^c Seoul National University   (South Korea)

Author keywords

Energy saving; Manufacturing cost; Micro drilling; Printed circuit board; Sustainable machining

Indexed keywords

ENERGY AND COST SAVINGS; ENVIRONMENTAL FACTORS; INDUSTRIAL SECTOR; MACHINING PARAMETERS; MANUFACTURING COST; MICRO-DRILLING; PRINTED CIRCUIT BOARD MANUFACTURING; PROCESS PARAMETERS;

COSTS; DRILLS; ENERGY CONSERVATION; MANUFACTURE; POLYCHLORINATED BIPHENYLS; PRINTED CIRCUIT BOARDS;

ENERGY UTILIZATION;

EID: 84879843118     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2013.04.028     Document Type: Article

References (35)

1. J.C. Aurich, I.G. Reichenbach, and G.M. Schuler Manufacture and application of ultra-small micro end mills CIRP Annals - Manufacturing Technology 61 1 2012 83 86
2. O.I. Avram, and P. Xirouchakis Evaluating the use phase energy requirements of a machine tool system Journal of Cleaner Production 19 6-7 2011 699 711
3. V.A. Balogun, and P.T. Mativenga Modeling of direct energy requirements in mechanical machining process Journal of Cleaner Production 41 2013 179 186
4. R.K. Bhushan Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites Journal of Cleaner Production 39 2013 242 254
5. K. Bunse, M. Vodicka, P. Schonsleben, M. Brulhart, and F.O. Ernst Integrating energy efficiency performance in production management - gap analysis between industrial needs and scientific literature Journal of Cleaner Production 19 6-7 2011 667 679
6. L.B. Christoffersen, A. Larsen, and M. Togeby Empirical analysis of energy management in Danish industry Journal of Cleaner Production 14 5 2006 516 526
7. D.K. Chung, H.S. Shin, M.S. Park, B.H. Kim, and C.N. Chu Recent researches in micro electrical machining International Journal of Precision Engineering and Manufacturing 12 2 2011 371 380
8. A.M. Deif A system model for green manufacturing Journal of Cleaner Production 19 14 2011 1553 1559
9. N. Diaz, E. Redelsheimer, and D. Dornfeld Energy consumption characterization and reduction strategies for milling machine tool use Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, May 2-4, Braunschweig, Germany 2011 263 267
10. D. Dornfeld, S. Min, and Y. Takeuchi Recent advances in mechanical micro-machining CIRP Annals - Manufacturing Technology 55 2 2006 745 768
11. D. Fratila Macro-level environmental comparison of near-dry machining and flood machining Journal of Cleaner Production 18 10-11 2010 1031 1039
12. T. Gutowski, C. Murphy, D. Allen, D. Bauer, B. Bras, T. Powonka, P. Sheng, J. Sutherland, D. Thurston, and E. Wolff Environmentally benign manufacturing: observations from Japan, Europe and the United States Journal of Cleaner Production 13 1 2005 1 17
13. J.-C. Hsieh, P.-C. Chang, and L.-C. Hsu Scheduling of drilling operations in printed circuit board factory Computers & Industrial Engineering 44 3 2003 461 473
14. M. Jonsson, C. Andersson, and J.E. Stahl A general economic model for manufacturing cost simulation Proceedings of the 41st CIRP Conference on Manufacturing Systems, 26-28 May, Tokyo, Japan 2008 33 38
15. S. Kara, and W. Li Unit process energy consumption models for material removal processes CIRP Annals - Manufacturing Technology 60 1 2011 37 40
16. G.D. Kim, and B.G. Loh Direct machining of micro patterns on nickel alloy and mold steel by vibration assisted cutting International Journal of Precision Engineering and Manufacturing 12 4 2011 583 588
17. D. Kong, S. Choi, Y. Yasui, S. Pavanaskar, D. Dornfeld, and P. Wright Software-based tool path evaluation for environmental sustainability Journal of Manufacturing Systems 30 4 2011 241 247
18. D.N. Kordonowy A Power Assessment of Machining Tools Bachelor of Science in Mechanical Engineering 2002 Department of Mechanical Engineering, Massachusetts Institute of Technology Cambridge, Massachusetts, USA
19. Korea Printed Circuit Association Worldwide PCB Industry Status 2012 Available on Online: kpca.or.kr/sub04-1-3.php (accessed. 03.12.13.)
20. J.L. Liow Mechanical micro-machining: a sustainable micro-device manufacturing approach? Journal of Cleaner Production 17 7 2009 662 667
21. D.A. Lucca, R.L. Rhorer, and R. Komanduri Energy dissipation in the ultraprecision machining of copper CIRP Annals - Manufacturing Technology 40 1 1991 69 72
22. J.S. Moon, H.S. Yoon, G.B. Lee, and S.H. Ahn Evaluation of backcstitch tool path strategy for stability and productivity in micro-drilling Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, Houston, Texas, USA 2012
23. T. Nagao, Y. Hatamura, and K. Uehara Investigation into drilling laminated printed circuit board using a torque-thrust-temperature sensor CIRP Annals - Manufacturing Technology 37 1 1988 79 82
24. E. O'Driscoll, and G.E. O'Donnell Industrial power and energy metering - a state-of-the-art review Journal of Cleaner Production 41 2013 53 64
25. C.H. Park, C.K. Song, J. Hwang, and B.S. Kim Development of an ultra precision machine tool for micro-machining on large surfaces International Journal of Precision Engineering and Manufacturing 10 4 2009 85 91
26. C.W. Park, K.S. Kwon, W.B. Kim, B.K. Min, S.J. Park, I.H. Sung, Y.S. Yoon, K.S. Lee, J.H. Lee, and J. Seok Energy consumption reduction technology in manufacturing - a selective review of policies, standards, and research International Journal of Precision Engineering and Manufacturing 10 5 2009 151 173
27. J.B. Park, K.H. Wie, J.S. Park, and S.H. Ahn Evaluation of machinability in the micro end milling printed circuit boards Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 223 11 2009 1465 1474
28. F. Pusavec, P. Krajnik, and J. Kopac Transitioning to sustainable production - part I: application on machining technologies Journal of Cleaner Production 18 2 2010 174 184
29. F. Pusavec, D. Kramar, P. Krajnik, and J. Kopac Transitioning to sustainable production - part II: evaluation of sustainable machining technologies Journal of Cleaner Production 18 12 2010 1211 1221
30. A. Rangarajan, and D. Dornfeld Efficient tool paths and part orientation for face milling CIRP Annals - Manufacturing Technology 53 1 2004 73 76
31. M.F. Rajemi, P.T. Mativenga, and A. Aramcharoen Sustainable machining: selection of optimum turning conditions based on minimum energy considerations Journal of Cleaner Production 18 10-11 2010 1059 1065
32. J.P. Santos, M. Oliveira, F.G. Almeida, J.P. Pereira, and A. Reis Improving the environmental performance of machine-tools: influence of technology and throughput on the electrical energy consumption of a press-brake Journal of Cleaner Production 19 4 2011 356 364
33. I.N. Tansel, T.T. Arkan, W.Y. Bao, N. Mahendrakar, B. Shisler, D. Smith, and M. McCool Tool wear estimation in micro-machining.: Part 1: tool usage-cutting force relationship International Journal of Machine Tools and Manufacture 40 4 2000 599 608
34. H. Weule, V. Huntrup, and H. Tritschler Micro-cutting of steel to meet new requirements in miniaturization CIRP Annals - Manufacturing Technology 50 1 2001 61 64
35. H.S. Yoon, R. Wu, T.M. Lee, and S.H. Ahn Geometric optimization of micro drills using Taguchi methods and response surface methodology International Journal of Precision Engineering and Manufacturing 12 5 2011 871 875