Energy consumption reduction technology in manufacturing - A selective review of policies, standards, and research

International Journal of Precision Engineering and Manufacturing

Volumn 10, Issue 5, 2009, Pages 151-173

  Park, Cheol Woo ^a   Kwon, Kye Si ^b   Kim, Wook Bae ^a   Min, Byung Kwon ^c   Park, Sung Jun ^d   Sung, In Ha ^e   Yoon, Young Sik ^f   Lee, Kyung Soo ^c   Lee, Ong Hang ^a   Seok, Jongwon ^g  

^a Korea Polytechnic University   (South Korea)

^b Soonchunhyang University   (South Korea)

^c Yonsei University   (South Korea)

^d Chungju National University   (South Korea)

^e Hannam University   (South Korea)

^f Konyang University   (South Korea)

^g Chung Ang University   (South Korea)

Author keywords

Co2 emission; Efficiency; Energy; Greenhouse Gases (GHG); Manufacturing; Productivity

Indexed keywords

EID: 77349111324     PISSN: 12298557     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12541-009-0107-z     Document Type: Article

References (159)

1. The Department for Business, Enterprise and Regulatory Reform, "Manufacturing: New Challenges, New Opportunities," 2008.
2. Evans, L. B., "Saving Energy in Manufacturing with Smart Technology," World Energy, Vol. 6, No. 2, pp. 112-118, 2003.
3. National Association of Manufacturers, "Efficiency and Innovation In U.S. Manufacturing Energy Use," 2005.
4. U. S. Energy Information Administration, "2002 Energy Consumption by Manufacturers -Data table," 2002.
5. Natural Resources Canada's Office of Energy Efficiency, "Energy Use in the Canadian Manufacturing Sector," Cat. No. M144-164/2007, 2008.
6. th CIRP International Conference on Life Cycle Engineering, pp. 623-628, 2006.
7. Commission of the European Communities, "An Energy Policy for Europe," COM 1, 2007.
8. Commission of the European Communities, "A European Strategic Energy Technology Plan (SET-PLAN): Towards a low carbon future," COM 723, 2007.
9. The European Parliament and the Council, "Directive 2006/32/EC," Official Journal of the European Union, 2006.
10. The European Parliament and the Council, "Directive 2005/32/EC," Official Journal of the European Union, 2005.
11. EPTA Ltd., "Study for preparing the first Working Plan of the EcoDesign Directive," Report No. ENTR/06/026, 2007.
12. Itoh, S., "Japan's Energy Strategy and Development of Energy Cooperation in the Asia-Pacific," ERINA Report, Vol. 77, pp. 35-48, 2007.
13. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, "Energy Conservation Policy & Measures in Japan," 2007.
14. Minami, N., "Japan's Energy Conservation Initiatives: Highlighting the Energy Conservation Policy," IEEJ Transactions on Electrical and Electronic Engineering, Vol. 3, No. 1, pp. 5-9, 2007.
15. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, "Energy in Japan 2006," pp. 7-12, 2006.
16. Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry, "New National Energy Strategy," 2006.
17. New Energy and Industrial Technology Development Organization, "Technology Strategy Map," 2008.
18. Bladh, I., "Energy Efficiency in Manufacturing," European Commission, 2009.
19. Draganescu, F., Gheorghe, M. and Doicin, C. V., "Models of Machine Tool Efficiency and Specific Consumed Energy," Journal of Materials Processing Technology, Vol. 141, No. 1, pp. 9-15, 2003.
20. Bolliger, M., Gallestey, E., Crosley, G. and Kiener, M., "Energy Optimization in Cement Manufacturing," ABB Review, Vol. 2, pp. 53-57, 2007.
21. Sutherland, J. W., Adler, D. P., Haapala, K. R. and Kumar, V., "A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production," CIRP Annals - Manufacturing Technology, Vol. 57, No. 1, pp. 5-8, 2008.
22. Dietmair, A. and Verl, A., "Energy Consumption Forecasting and Optimisation for Tool Machines," Modern Machinery Science Journal, pp. 62-67, 2009.
23. Herrmann, C. and Thiede, S., "Process Chain Simulation to Foster Energy Efficiency in Manufacturing," CIRP Journal of Manufacturing Science and Technology, Vol. 1, No. 4, pp. 221-229, 2009.
24. Wolters, W. T. M., Lambert, A. J. D. and Claus, J., "Sequencing problems in designing energy efficient production systems," International Journal of Production Economics, Vol. 41, No. 1-3, pp. 405-410, 1995.
25. David, J. L., "The Smart Grid in 2010 - Market Segments, Applications and Industry Players," GTM Research, pp. 10-45, 2009.
26. Anastasopoulos, M. P., Voulkidis, A. C., Vasilakos, A. V. and Cottis, P. G., "A secure network management protocol for SmartGrid BPL networks: Design, implementation and experimental results," Computer Communications, Vol. 31, No. 18, pp. 4333-4342, 2008.
27. Coll-Mayor, D., Paget, M. and Lightner, E., "Future intelligent power grid: Analysis of the vision in the European Union and the United States," Energy Policy, Vol. 35, No. 4, pp. 2453-2465, 2007.
28. Chassin, D. P. and Kiesling, L., "Decentralized Coordination through Digital Technology, Dynamic Pricing, and Customer-Driven Control: The GridWise Testbed Demonstration Project," The Electricity Journal, Vol. 21, No. 8, pp. 51-59, 2008.
29. Battaglini, A., Lilliestam, J., Haas, A. and Patt, A., "Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources," Journal of Cleaner Production, Vol. 17, No. 10, pp. 911-918, 2009.
30. Nair, N. K. C. and Zhang, L., "SmartGrid: Future networks for New Zealand power systems incorporating distributed generation," Energy Policy, Vol. 37, No. 9, pp. 3418-3427, 2009.
31. Kim, T. H., "Korea to Save Power Through Smart Grid," The Korea Times, 2009.
32. Chan, T., "Korea to create huge smart grid industry," Greentelecomlive, 2009.
33. Koizawa, K., "Smart Grid related R&D in NEDO," New Energy and Industrial Technology Development Organization, 2009.
34. Saha, A. K., Chowdhury, S., Chowdhury, S. P. and Crossley, P. A., "Microturbine Based Distributed Generator in Smart Grid Application," IET Digest, Vol. 2008, No. 12380, pp. 11-14, 2008.
35. Agafiotis, C. and Tsoutsos, T., "Energy saving technologies in the European ceramic sector: a systematic review," Applied Thermal Engineering, Vol. 21, No. 12, pp. 1231-1249, 2001.
36. Worrell, E., Faaij, A. P. C., Phylipsen, G. J. M. and Blok, K., "An approach for analysing the potential for material efficiency improvement," Resources, Conservation and Recycling, Vol. 13, No. 3, pp. 215-232, 1995.
37. Hekkert, M. P., Joosten, L. A. J., Worrell, E. and Turkenburg, W. C., "Reduction of CO2 emissions by improved management of material and product use: the case of primary packaging," Resources, Conservation and Recycling, Vol. 29, No. 1, pp. 33-64, 2000.
38. Behrens, B. A., Suchmann, P. and Schott, A., "Warm forging: new forming sequence for the manufacturing of long flat pieces," Production Engineering, Vol. 2, No. 3, pp. 261-268, 2008.
39. European Commission, "EU energy research," 2008.
40. th framework programme," 2007.
41. European Commission, "Work Programme 2010, Cooperation THEME 4-NMP," 2009.
42. AIAG FoF PPP, "Factories of the Future PPP - Draft Strategic Multi-annual Roadmap," 2009.
43. Zoz, H., Kaupp, G., Ren, H., Goepel, K. and Naimi-Jamal, M. R., "Recycling of EAF dust by semi-continuous high kinetic process," Metall, Vol. 59, No. 5, pp. 293-296, 2005.
44. European Commission, "SME FP6 Project Catalogue-A Collection of Co-operative and Collective Research Projects," p. 186, 2008.
45. Nodeszeloss, http://www.ucm.es/info/nodeszel/main.htm
46. RotoFlex, http://rotoflex-eu.org
47. Intelligent Manufacturing System, http://www.ims.org
48. IMS2020, http://www.ims2020.net
49. IMS2020-Supporting Global Research for 2020 Manufacturing Vision, http://ims2020net.wik.is
50. Energy Efficient Manufacturing, http://ims2020net.wik.is/Research_Topics_List/KAT_2
51. D'Addona, D., Teti, R. and Carbone, R., "Quick Response Manufacturing Approach for Lead Time Reduction in PCB Fabrication," IPROMS 2006, 2006.
52. Papagiannis, G., Dagoumas, A., Lettas, N. and Dokopoulos, P., "Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level," Energy Policy, Vol. 36, No. 1, pp. 163-180, 2008.
53. Unger, N., Schneider, F. and Salhofer, S., "A review of ecodesign and environmental assessment tools and their appropriateness for electrical and electronic equipment," Progress in Industrial Ecology - An International Journal, Vol. 5, No. 1-2, pp. 13-29, 2008.
54. Campatelli, G., "Analysis of the environmental impact for a turning operation of AISI 1040 steel," IPROMS 2009, 2009.
55. Zhu, Z. and Mekid, S., "Energy harvesting for wireless sensor nodes: investigation of architectures and sources of energy," International Journal of Computer Aided Engineering and Technology, Vol. 1, No. 2, pp. 239-249, 2009.
56. Kimura, F., "An approach to configuring environmentally conscious manufacturing systems," J. of JSPE, Vol. 71, No. 8, pp. 941-945, 2005.
57. Ohashi, T. and Kawaguchi, T., "Environment-conscious plant and process for vehicle manufacturing," J. of JSPE, Vol. 71, No. 8, pp. 946-948, 2005.
58. Abe, H., "Environmental conscious production system of RICOH group," J. of JSPE, Vol. 71, No. 8, pp. 949-953, 2005.
59. Sekiguchi, T., "Trend and next development of cutting tool for eco-machining," J. of JSPE, Vol. 75, No. 1, pp. 123-125, 2009.
60. Motonishi, S., "Progress of PVD coated tools," J. of JSPE, Vol. 75, No. 1, pp. 70-71, 2009.
61. Matsubara, T., "Present state and problems of eco-machining technology," J. of JSPE, Vol. 68, No. 7, pp. 885-889, 2002.
62. Yokota, H., "Current MQL machining and its next development," J. of JSPE, Vol. 68, No. 7, pp. 903-906, 2002.
63. Nakamura, T., "On film on water fog metalworking fluid," J. of JSPE, Vol. 68, No. 7, pp. 899-902, 2002.
64. Ukai, H., "Dry cutting technology by nitrogen gas," J. of JSPE, Vol. 68, No. 7, pp. 890-894, 2002.
65. Mukai, R., "Trend to reducing technology of environment load in grinding machine," J. of JSPE, Vol. 68, No. 7, pp. 911-914, 2002.
66. Tadashi, M., "Development and trend of machine tools for MQL," Tool Engineer, Vol. 47, No. 4, pp. 44-49, 2003.
67. Koji, O., "Environment-conscious technology in machine tool maker," Tool Engineer, Vol. 52, No. 8, pp. 15-19, 2008.
68. Tadashi, M., "Environment-conscious machine tools and its use in automotive parts machining," Tool Engineer, Vol. 52, No. 8, pp. 20-25, 2008.
69. Hayashida, K., "Technical trend of steering system and grinding machine," J. of JSPE, Vol. 75, No. 1, pp. 136-137, 2009.
70. Kubo, A., "Machine elements," J. of JSPE, Vol. 75, No. 1, pp. 85-86, 2009.
71. Nakamura, S. and Miyaguchi, K., "Technical development of precision bearing and ball screw," J. of JSPE, Vol. 75, No. 1, pp. 121-122, 2009.
72. Kobayashi, T., "Progress of NTN's bearing technology in the past quarter century and its future perspective," J. of JSPE, Vol. 75, No. 1, pp. 130-131, 2009.
73. Kurita, T. and Hattori, M., "Development of new concept desk top size machine tool," Int. J. of Machine Tools & Manufacture, Vol. 45, No. 7-8, pp. 959-965, 2005.
74. Yoshiaki, K., "Present and future of TMC multifunctional machine," Tool Engineer, Vol. 47, No. 11, pp. 18-22, 2003.
75. Tsuneo, K., Toshihiro, Y., Akkinori, K. and Hideki, T., "TOPEMS optimal operation system for energy saving in manufacturing plants," Toshiba review, Vol. 62, No. 8, pp. 45-48, 2007.
76. Caterpillar Japan, "Global warming prevention by factory integrity," The Energy Conservation Center in Japan, Case Studies of Excellent Energy Saving, pp. 1-8, 2008.
77. Masao, D., "Energy saving in heavy machine manufacturing shop," Tool Engineer, Vol. 52, No. 8, pp. 10-14, 2008.
78. Keisuke, K., "A new point of time energy saving by low pressurization," Tool Engineer, Vol. 52, No. 8, pp. 26-28, 2008.
79. Aoki, I., "Precision fine blanking," J. of JSPE, Vol. 75, No. 1, pp. 56-57, 2009.
80. Worrell, E. and Galitsky, C., "Energy efficiency improvement and cost saving opportunities for cement making; An energy star® guide for energy and plant managers," Lawrence Berkeley National Laboratory, LBNL-54036-Revision, 2008.
81. Jahanmir, S., Ives, L. K., Ruff, A. W. and Peterson, M. B., "Ceramic Machining: Assessment of Current Practice and Research Needs in the United States 1992," NIST Special Publication, Vol. 834, Shipping list no.: 92-2331-M, 1992.
82. Bentzen, J., "Estimating the rebound effect in US manufacturing energy consumption," Energy Economics, Vol. 26, No. 1, pp. 123-134, 2004.
83. Djassemi, M., "A parametric programming technique for efficient CNC machining operations," Computers & Industrial Engineering, Vol. 35, No. 1-2, pp. 33-36, 1998.
84. Schmitz, T., Davies, M., Dutterer, B. and Ziegert, J., "The application of high-speed CNC machining to prototype production," International Journal of Machine Tools and Manufacture, Vol. 41, No. 8, pp. 1209-1228, 2001.
85. Rakwal, D. and Bamberg, E., "Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining," Journal of Materials Processing Technology, Vol. 209, No. 8, pp. 3740-3751, 2009.
86. Miller, S. F., Shih, A. J. and Qu, J., "Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials," International Journal of Machine Tools & Manufacture, Vol. 44, No. 4, pp. 391-400, 2004.
87. Fox-Rabinovich, G. S., Yamomoto, K., Veldhuis, S. C., Kovalev, A. I. and Dosbaeva, G. K., "Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions," Surface & Coatings Technology, Vol. 200, No. 5-6, pp. 1804-1813, 2005.
88. Kovacevic, R., Cherukuthota, C. and Mazurkiewicz, M., "High pressure waterjet cooling/lubrication to improve machining efficiency in milling," International Journal of Machine Tools & Manufacture, Vol. 35, No. 10, pp. 1459-1473, 1995.
89. Calatoru, V. D., Balazinski, M., Mayer, J. R. R., Paris, H. and L'Espérance, G., "Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminium alloy with carbide end mills," Wear, Vol. 265, No. 11-12, pp. 1793-1800, 2008.
90. Anderson, M., Patwa, R. and Shin, Y. C., "Laser-assisted machining of Inconel 718 with an economic analysis," International Journal of Machine Tools & Manufacture, Vol. 46, No. 14, pp. 1879-1891, 2006.
91. Draganescu, F., Gheorghe, M. and Doicin, C. V., "Models of machine tool efficiency and specific consumed energy," Journal of Materials Processing Technology, Vol. 141, No. 1, pp. 9-15, 2003.
92. Evans, L. B., "Saving Energy in Manufacturing with Smart Technology," World Energy, Vol. 6, No. 2, pp. 112-118, 2003.
93. Marksberry, P. W., "Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly," Journal of Cleaner Production, Vol. 15, No. 10, pp. 958-971, 2007.
94. Weinert, K., Inasaki, I., Sutherland, J. W. and Wakabayashi, T., "Dry Machining and Minimum Quantity Lubrication," CIRP Annals - Manufacturing Technology, Vol. 53, No. 2, pp. 511-537, 2004.
95. Dasch, J. M., Ang, C. C., Wong, C. A., Waldo, R. A., Chester, D., Cheng, Y. T., Powell, B. R., Weiner, A. M. and Konca, E., "The effect of free-machining elements on dry machining of B319 aluminum alloy," Journal of Materials Processing Technology, Vol. 209, No. 10, pp. 4638-4644, 2009.
96. Williams, J. and Shu, L. H., "Analysis of Remanufacturer Waste Streams Across Product Sectors," CIRP Annals - Manufacturing Technology, Vol. 50, No. 1, pp. 101-104, 2001.
97. Adler, D. P., Kumar, V., Ludewig, P. A. and Sutherland, J. W., "Comparing Energy and Other Measures of Environmental Performance in the Original Manufacturing and Remanufacturing of Engine Components," Proc. of the 2007 ASME International Manufacturing Science and Engineering Conference, pp. 1-10, 2007.
98. Amezquita, T., Hammond, R. and Bras, R., "Characterizing the Remanufacturability of Engineering Systems," Proc. Of 1995 ASME Adv. in Des. Automation Conference, pp. 271-278, 1995.
99. Lund, R. T. and Hauser, W., "The Remanufacturing Industry: Anatomy of a Giant," Department of Manufacturing Engineering, Boston University, 2003.
100. Bollinger, L., Frenkel, R., Grand, R., Kutta, R., Lund, R. and Stanovsky, C., "Remanufacturing Survey Findings," Center for Policy Alternatives, MIT, 1981.
101. Larsen, H. and Petersen, L. S., "Future options for energy technology," Riso Energy Report 6, Riso National Lab. Technical University of Denmark, 2007.
102. The NEED Project, "Intermediate Energy Infobook," 2009.
103. th Japan International SAMPE Symposium & Exhibition, 2009.
104. New Energy and Industrial Technology Development Organization, "Japanese Technologies for energy savings/GHG Emissions Reduction," 2008.
105. Rob, G. R., "Future transportation with smart grids & sustainable energy," Journal of Systemics, Cybernetics and Informatics, Vol. 7, No. 5, pp. 4-8, 2009.
106. Andrews, C. J. and Krogmann, U., "Technology diffusion and energy intensity in US commercial buildings," Energy Policy, Vol. 27, No. 2, pp. 541-553, 2009.
107. Sanches, M. C., Brown, R. E., Webber, C. and Homan G. K., "Savings estimates for the United States Environmental Protection Agency's Energy Star voluntary product labeling program," Energy Policy, Vol. 36, No. 6, pp. 2098-2108, 2008.
108. Barrett, M., Lowe, R., Oreszczyn, T. and Steadman P., "How to support growth with less energy," Energy Policy, Vol. 36, No. 12, pp. 4592-4599, 2008.
109. Jung, J.-W., Ko, S.-H., Jeong, Y.-H., Min, B.-K. and Lee, S. J., "Real-time Gap Control for Micro-EDM: Application in a Microfactory," IJPEM, Vol. 9, No. 1, pp. 3-6, 2008.
110. Okazaki, Y., Mishima, N. and Ashida, K., "Microfactory - Concept, history, and developments," Journal of Manufacturing Science and Engineering, Vol. 126, No. 4, pp. 837-844, 2004.
111. Mishima, N., Kondo, S. and Masui, K., "A Study on Efficiency Analysis of Micro Manufacturing Systems," Proc. of the 2007 IEEE, International Conference on Mechatronics and Automation, pp. 51-56, 2007.
112. Kurita, T. and Hattori, M., "Development of new-concept desk top size machine tool," International Journal of Machine Tools & Manufacture, Vol. 45, No. 7-8, pp. 959-965, 2005.
113. Nakano, S., Ashida, K., Park, J. and Akedo, J., "On demand manufacturing system ~a solution of ecological MEMS factory," 6th International Workshop on Microfactories, 2008.
114. Landymore, K. "Electrical Energy Reduction in Refrigeration and Air Conditioning," Smartcool Systems Inc., 2006.
115. Energy Information Administration, "International Energy Outlook 2009," U.S. Department of Energy, 2009.
116. International Energy Agency, "Tracking Industrial Energy Efficiency and CO2 Emissions," 2007.
117. International Energy Agency, "CO2 Emissions from Fuel Combustion (2003 Edition)," 2004.
118. Energy Information Administration, "International Energy Outlook 2006," U.S. Department of Energy, 2006.
119. Energy Information Administration, "International Energy Outlook 2007," U.S. Department of Energy, 2007.
120. Energy Information Administration, "International Energy Outlook 2008," U.S. Department of Energy, 2008.
121. Narita, H. and Fujimoto, H., "Analysis of Environmental Impact due to Machine Tool Operation," Int. J. of Automation Technology, Vol. 3, No.1, pp. 49-55, 2009.
122. IPCC 3rd Assessment Report - Climate Change 2001, "Chapter 6 - Radiative Forcing of Climate Change," Intergovernmental Panel on Climate Change, 2001.
123. Korea Energy Economics Institute, "Trends in the greenhouse gas emissions," 2006.
124. Energy Information Administration, "Emissions of Greenhouse Gases in the United States 2007," U.S. Department of Energy, 2008.
125. Stachowiak, G. W. and Batchelor, A. W., "Engineering tribology: 3rd ed.," Butterworth-Heinemann, pp. 709-710, 2005.
126. Korea Energy Economics Institute, "2008 Energy Consumption Survey," Korea Ministry of Knowledge Economy, 2009.
127. Energy Information Administration, "2006 Consumption of Energy for All Purposes (First Use) By Manufacturing Industry & Region," U.S. Department of Energy, 2009.
128. Industrial Consumption of Energy Survey, "Summary Report of Energy Use in the Canadian Manufacturing Sector 1995-2005," Canada Office of Energy Efficiency, 2008.
129. Canada Office of Energy Efficiency, "Energy Use Data Handbook Tables (Industrial sector)," Natural resources Canada, 2009.
130. Energy Information Administration, "International Energy Annual 2006," U.S. Department of Energy, 2008.
131. Energy Conservation Center in Japan, "Japan Energy Conservation Handbook 2005/2006," 2006.
132. MacLeay, I., Harris, K. and Michaels, C., "Digest of United Kingdom Energy Statistics 2007," Department for Business Enterprise and Regulatory Reform, 2007.
133. Norway Statistics, "Industrial energy use, temporary data, 2008 - Powerful increase in energy costs," 2009.
134. Welch, D., "Manufacturing Energy Use Survey: Year ended March 2006," Statistics New Zealand, 2007.
135. Dang, H., Tamayo, J. and Wilkinson, D., "New Zealand Energy in Brief," New Zealand Ministry of Economic Development, 2007.
136. Energy Information Administration, "Annual Energy Outlook 2008 With Projections to 2030," U.S. Department of Energy, 2008.
137. Briefing Note and referenced information, "BNXS01: Carbon Dioxide Emission Factors for UK Energy Use," 2009.
138. Point Carbon, http://www.pointcarbon.com.
139. Hoekstra, R. and van der Bergh, H., "Comparing structural and index decomposition analysis," Energy Economics, Vol. 25, No. 1, pp. 39-64, 2003.
140. Ang, B. W. and Liu, N., "Energy decomposition analysis: IEA model versus other methods," Energy Policy, Vol. 35, No. 3, pp. 1426-1432, 2007.
141. Ang, B. W. and Liu, N., "Handling zero values in the logarithmic mean Divisia index decomposition approach," Energy Policy, Vol. 35, No. 1, pp. 238-246, 2007.
142. Ang, B. W. and Zhang, F. Q., "A survey of index decomposition analysis in energy and environmental studies," Energy, Vol. 25, No. 12, pp. 1149-1176, 2000.
143. Liu, F. L. and Ang, B. W., "Eight methods for decomposing the aggregate energy intensity of industry," Applied Energy, Vol. 76, No. 1-3, pp. 15-23, 2003.
144. Boyd, G. A. and Roop, J. M., "A note on the Fisher ideal index decomposition for structural change in energy intensity," The Energy Journal, Vol. 25, No. 1, pp. 87-101, 2004.
145. Ang, B. W., Liu, F. L. and Chung, H. S., "A generalized Fisher index approach to energy decomposition analysis," Energy Economics, Vol. 26, No. 5, pp. 757-763, 2004.
146. Boer, P., "Generalized Fisher index or Siegel-Shapley decomposition?," Energy Economics, Vol. 31, No. 5, pp. 810-814, 2009.
147. Lenzen, M., "Decomposition analysis and the mean-rate-of-change index," Applied Energy, Vol. 83, No. 3, pp. 185-198, 2006.
148. Chung, H. S. and Lee, H. C., "A residual-free decomposition of the sources of carbon-dioxide emissions: a case of the Korean industries," Energy, Vol. 26, No. 1, pp. 15-30, 2001.
149. Lescaroux, F., "Decomposition of US manufacturing energy intensity and elasticities of components with respect to energy prices," Energy Economics, Vol. 30, No. 3, pp. 1068-1080, 2008.
150. Unander, F., "Decomposition of manufacturing energy-use in IEA countries, How do recent developments compare with historical long-term trends?," Applied Energy, Vol. 84, No. 7-8, pp. 771-780, 2007.
151. Weber, C. L., "Measuring structural change and energy use: Decomposition of the US economy from 1997 to 2002," Energy Policy, Vol. 37, No. 4, pp. 1561-1570, 2009.
152. Sun, J., "Changes in energy consumption and energy intensity: a complete decomposition model," Energy Economics, Vol. 20, No. 1, pp. 85-100, 1998.
153. Diakoulaki, D. and Mandaraka, M., "Decomposition analysis for assessing the progress in decoupling industrial growth from CO2 emissions in the EU manufacturing sector," Energy Economics, Vol. 29, No. 4, pp. 636-664, 2007.
154. Papagiannaki, K. and Diakoulaki, D., "Decomposition analysis of CO2 emissions from passenger cars: The cases of Greece and Denmark," Energy Policy, Vol. 37, No. 8, pp. 3259-3267, 2009.
155. Greening, L. A., Ting, M. and Davis, W. B., "Decomposition of aggregate carbon intensity for freight: trends from 10 OECD countries for the period 1971-1993," Energy Economics, Vol. 21, No. 4, pp. 331-361, 1999.
156. Schipper, L., Scholl, L. and Price, L., "Energy use and carbon emissions from freight in 10 industrialised countries: an analysis of trends from 1973 to 1992," Transportation Research Part D: Transport and Environment, Vol. 2, No. 1, pp. 57-76, 1997.
157. Scholl, L., Schipper, L. and Kiang, N., "CO2 emissions from passenger transport: a comparison of international trends from 1973 to 1992," Energy Policy, Vol. 24, No. 1, pp. 17-30, 1996.
158. Schipper, L., Steiner, R., Duerr, P., An, F. and Strøm, S., "Energy use in passenger transport in OECD countries: changes since 1970," Transportation, Vol. 19, No. 1, pp. 25-42, 1992.
159. Kwon, T.-H., "Decomposition of factors determining the trend of CO2 emissions from car travel in Great Britain (1970-2000)," Ecological Economics, Vol. 53, No. 2, pp. 261-275, 2005.