Evaluation of ionic liquids as lubricants in micro milling - Process capability and sustainability

Journal of Cleaner Production

Volumn 76, Issue , 2014, Pages 167-173

  Pham, Minh Quan ^a   Yoon, Hae Sung ^a   Khare, Varsha ^a   Ahn, Sung Hoon ^a,b  

^a Seoul National University   (South Korea)

^b Seoul National University   (South Korea)

Author keywords

Eco friendly; Ionic liquid; Lubricant; Micro milling; Sustainable

Indexed keywords

ENVIRONMENTAL PROTECTION; FRICTION; LUBRICANTS; MILLING (MACHINING); SURFACE ROUGHNESS; SUSTAINABLE DEVELOPMENT; TUNGSTEN CARBIDE; VISCOSITY;

ECO-FRIENDLY; LOW VAPOR PRESSURES; LUBRICATION CONDITION; MICRO MILLING; PROCESS CAPABILITIES; RESEARCH COMMUNITIES; SUSTAINABLE; WORKPIECE MATERIALS;

IONIC LIQUIDS;

EID: 84901856764     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2014.04.055     Document Type: Article

References (43)

1. A. Adhvaryu, S.Z. Erhan, and J.M. Perez Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants Wear 257 2004 359 367
2. L.G. Beng, and B. Omar Integrating axiomatic design principles into sustainable product development Int. J. Precis. Eng. Manufact. Green Technol. 1 2014 107 117
3. M.D. Bermudez, A.E. Jimenez, J. Sanes, and F.J. Carrion Ionic liquids as advanced lubricant fluids Molecules 14 2009 2888 2908
4. G. Byrne, D. Dornfeld, and B. Denkena Advancing cutting technology CIRP Ann. Manuf. Technol. 52 2003 483 507
5. P.J. Carvalho, C.M.S.S. Neves, and J.A.P. Coutinho Surface tensions of Bis(trifluoromethylsulfonyl) imide anion-based ionic liquids J. Chem. Eng. Data 55 2010 3807 3812
6. W.S. Chu, C.I. Baek, S.H. Ahn, and T.H. Cho Rapid prototyping of 3D micro rockets using mechanical micro machining J. Mech. Sci. Technol. 20 2006 2405 2413
7. V. Derflinger, H. Brandle, and H. Zimmermann New hard/lubricant coating for dry machining Surf. Coat. Technol. 113 1999 286 292
8. N.R. Dhar, M.T. Ahmed, and S. Islam An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills Int. J. Mach. Tools Manuf. 47 2007 748 753
9. D. Dornfeld, S. Min, and Y. Takeuchi Recent advances in mechanical micromachining CIRP Ann. - Manuf. Technol. 55 2006 745 768
10. H.J. Kang, and S.H. Ahn Fabrication and characterization of micro parts by mechanical micro machining: precision and cost estimation Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 221 2007 231 240
11. V. Khare, Z. Li, A. Mantion, A.A. Ayi, S. Sonkaria, A. Voelkl, A.F. Thunemann, and A. Taubert Strong anion effects on gold nanoparticle formation in ionic liquids J. Mater. Chem. 20 2010 1332 1339
12. V. Khare, A. Kraupner, A. Mantion, A. Jelicic, A.F. Thunemann, C. Giordano, and A. Taubert Stable iron carbide nanoparticle dispersions in [EMIM][SCN] and [EMIM][N(CN)2] ionic liquids Langmuir 26 2010 10600 10605
13. V. Khare, C. Ruby, and S. Sonkaria A green and sustainable nanotechnology: role of ionic liquids Int. J. Precis. Eng. Manuf. 13 2012 1207 1213
14. C.J. Kim, M. Bono, and J. Ni Experimental analysis of chip formation in micro-milling Trans. NAMRI/SME XXX 2002 247 254
15. K.S. Kim, D. Demberelnyamba, B.K. Shin, S.H. Yeon, S. Choi, J.H. Cha, H. Lee, C.S. Lee, and J.J. Shim Surface tension and viscosity of 1-butyl-3-methylimidazolium iodide and 1-butyl-3-methylimidazolium tetrafluoroborate, and solubility of lithium bromide+1-butyl-3-methylimidazolium bromide in water Korean J. Chem. Eng. 23 2006 113 116
16. Y. Kondo, S. Yagi, T. Koyama, R. Tsuboi, and S. Sasaki Lubricity and corrosiveness of ionic liquids for steel-on-steel sliding contacts Proc. Inst. Mech. Eng. Part J. J. Eng. Tribol. 226 2012 991 1006 November
17. P.H. Lee, J.S. Nam, C. Li, and S.W. Lee An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL) Int. J. Precis. Eng. Manuf. 13 2012 331 338
18. K.M. Li, and S.Y. Chou Experimental evaluation of minimum quantity lubrication in near micro-milling J. Mater. Process. Technol. 210 2010 2163 2170
19. W. Liu, C. Ye, Q. Gong, H. Wang, and P. Wang Tribological performance of room-temperature ionic liquids as lubricant Tribol. Lett. 13 2002 81 85
20. J. Liu, R. Han, and Y. Sun Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting Int. J. Mach. Tools Manuf. 45 2005 687 694
21. X. Liu, F. Zhou, Y. Liang, and W. Liu Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism Wear 261 2006 1174 1179
22. M.R. Lovell, M.A. Kabir, P.L. Menezes, and C.F. Higgs Influence of boric acid additive size on green lubricant performance Philos. Trans. Royal Soc. 368 2010 4851 4868
23. R. Lu, S. Mori, K. Kobayashi, and H. Nanao Study of tribochemical decomposition of ionic liquids on a nascent steel surface Appl. Surf. Sci. 255 2009 8965 8971
24. C. Mao, X. Tang, H. Zou, X. Huang, and Z. Zhou Investigation of grinding characteristic using nanofluid minimum quantity lubrication Int. J. Precis. Eng. Manuf. 13 2012 1745 1752
25. I. Minami Ionic liquids in tribology Molecules 14 2009 2286 2305
26. I. Minami, H. Kamimura, and S. Mori Thermo-oxidative stability of ionic liquids as lubricating fiuids J. Synth. Lubr. 24 2007 135 147
27. J.S. Nam, P.H. Lee, and S.W. Lee Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication Int. J. Mach. Tools Manuf. 51 2011 649 652
28. T.K. Nguyen, I. Do, and P. Kwon A tribological study of vegetable oil enhanced by nano-platelets and implication in MQL machining Int. J. Precis. Eng. Manuf. 13 2012 1077 1083
29. M. Nouari, G. List, F. Girot, and D. Coupard Experimental analysis and optimization of tool wear in dry machining of aluminum alloys Wear 255 2003 1359 1368
30. M. Palacio, and B. Bhushan A review of ionic liquids for green molecular lubrication in nanotechnology Tribol. Lett. 40 2010 247 268
31. J.B. Park, K.H. Wie, J.S. Park, and S.H. Ahn Evaluation of machinability in the micro end milling printed circuit boards Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 223 2009 1465 1474
32. K.H. Park, J. Olortegui-Yume, M.C. Yoon, and P. Kwon A study on droplets and their distribution for minimum quantity lubrication (MQL) Int. J. Mach. Tools Manuf. 50 2010 824 833
33. J.R.S. Prakash, M. Rahman, A.S. Kumar, and S.C. Lim Effect of Minimal Quantities of Lubricant in Micro Milling 10th International conference on precision engineering (ICPE), Yokohama, Japan 2002
34. J. Qu, M. Chi, H.M. Meyer, P.J. Blau, S. Dai, and H. Luo Nanostructure and composition of tribo-boundary films formed in ionic liquid lubrication Tribol. Lett. 43 2011 205 211
35. R.A. Reich, P.A. Stewart, J. Bohaychick, and J.A. Urbanski Base oil properties of ionic liquids Lubr. Eng. 59 2003 16 21
36. P.S. Sreejith, and B.K.A. Ngoi Dry machining: machining of the future J. Mater. Process. Technol. 101 2000 287 291
37. B. Tasdelena, T. Wikblomb, and S. Ekered Studies on minimum quantity lubrication (MQL) and air cooling at drilling J. Mater. Process. Technol. 200 2008 339 346
38. F. Vollerstsen, and F. Schmidt Dry metal forming: definition, chances and challenges Int. J. Precis. Eng. Manuf. Green Technol. 1 2014 59 62
39. H. Wang, Q. Lu, C. Ye, W. Liu, and Z. Cui Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact Wear 256 2004 44 48
40. M.A. Xavior, and M. Adithan Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel J. Mater. Process. Technol. 209 2009 900 909
41. H.S. Yoon, R. Wu, T.M. Lee, and S.H. Ahn Geometric optimization of micro drills using Taguchi methods and response surface methodology Int. J. Precis. Eng. Manuf. 12 2011 871 875
42. H.S. Yoon, J.S. Moon, M.Q. Pham, G.B. Lee, and S.H. Ahn Control of machining parameters for energy and cost savings in micro-scale drilling of PCBs J. Clean. Prod. 54 2013 41 48
43. S. Zhang, N. Sun, X. He, X. Lu, and X. Zhang Physical properties of ionic liquids: database and evaluation J. Phys. Chem. Ref. Data 35 2006 1475 1517