Electronic waste recycling

Electronic Waste: Recycling Techniques

Volumn , Issue , 2015, Pages 87-127

  Kasper, Angela Cristina ^a   Gabriel, Adjanara Preis ^a   De Oliveira, Erich Lopes Braitback ^a   De Freitas Juchneski, Nichele Cristina ^a   Veit, Hugo Marcelo ^a  

^a FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTOMERS; ELECTRONIC EQUIPMENT; ELECTRONIC WASTE; RECYCLING; WASTES;

ELECTRONIC WASTE RECYCLING; GENERAL RECYCLING; METAL FRACTIONS; NON-METALLIC; RECYCLING PROCESS;

PLASTIC RECYCLING;

EID: 84934971317     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-15714-6_9     Document Type: Chapter

References (178)

1. Wang R, Xu Z (2014) Recycling of non-metallic fractions from wasteelectrical andelectronicequipment (WEEE): a review. Waste Manag 34(8):1455-1469
2. Widmer R, Oswald-Krapf H, Sinha-Khetriwal D, Schnellmann M, Heinz BH (2005) Global perspectives one-waste.Environ Impact Assess Rev 25:436-458
3. Oguchi M, Murakami S, Sakanakura S, Kida A, Kameya T (2011) A preliminary categorization ofend-of-lifeelectrical andelectronicequipment as secondary metal resources. Waste Manag 31:2150-2160
4. UNEP & UNU (United NationsEnvironment Programme & United Nations University)Sustainable innovation and technology transfer industrial sector studies-recycling fromewaste to resources. Berlin, Germany
5. Sustainable innovation and technology transfer industrial sector studies-recycling frome waste to resources. Berlin, Germany
6. Jang YC (2010) Wasteelectrical andelectronicequipment (WEEE) management in Korea: generation, collection, and recycling systems. J Mater Cycles Waste Manag 12:283-294
7. Tanskanen P (2013) Management and recycling ofelectronic waste. Acta Mater 61:1001-1011
8. Li J, Shrivastava P, Gao Z, Zhang HC (2004) Printed Circuit board recycling: a state-of-the-art survey. IEEE TransElectron Packag Manuf 27(1):33-42
9. Jang YC, Kim M (2010) Management of used &end-of-life mobile phones in Korea: a review. Resour Conserv Recycl 55:11-19
10. Hageluken C (2005) Recycling ofelectronic scrap at Umicore’s integrated metals smelter and refinery. In: Proceedings ofEMC
11. Cui J, Zhang L (2008) Metallurgical recovery of metals fromelectronic waste: a review. J Hazard Mater 158:228-256
12. Besiou M, Georgiadis P, Van Wassenhove LN (2012) Official recycling and scavengers: symbiotic or conflicting?Eur J Oper Res 218:563-576
13. Kang HY, Schoenung JM (2005)Electronic waste recycling: a review of U.S. infrastructure and technology options. Resour Conserv Recycl 45:368-400
14. Fisher M (2006) Feedstock recycling technologies in the sustainable recycling of plastics fromend-of-lifeelectrical andelectronic products. In: IEEE international symposium onelectronics and theenvironment, American Chemistry Council, Arlington, USA
15. Jung SH, Kim SJ, Kim JS (2012) Thermal degradation of acrylonitrile-butadiene-styrene (ABS) containing flame retardants using a fluidized bed reactor: theeffects of Ca-based additives on halogen removal. Fuel Process Technol 96:265-270
16. Astm (2000) D5033-00: standard guide for development of ASTM standards relating to recycling and use of recycled plastics
17. Gabriel AP (2012) Caracterizafaoe Reciclagem da Carcafa Polimerica de Monitores de Tubos de Raios Catodicos Pos-Consumo. Universidade Federal do Rio Grande do SulUFRGS, Dissertafao de mestrado
18. Tsydenova O, Bengtsson M (2011) Chemical hazards associated with treatment of wasteelectrical andelectronicequipment. Waste Manag 31:45-58
19. Perez JG, Navarro PF, Castello A, Cima MFL, Ramis R, BoldoE, Abente GL (2013) Cancer mortality in towns in the vicinity of incinerators and installations for the recovery or disposal of hazardous waste.Environ Int 51:31-44
20. Vilaplana F, Karlsson S, Ribes-Greus A (2007) Changes in the microstructure and morphology of high-impact polystyrene subjected to multiple processing and thermo-oxidative degradation.Eur Polymer J 43:4371-4381
21. SanchesEMS, Felisberti MI, Costa CAR, Galembeck F (2003) Avaliafao da Degradafao Termicae Fotooxidativa do ABS para Fins de Reciclagem. Polimeros: Cienciae Tecnologia 13(3):166-172
22. Santos ASF, Agnelli JAM, Manrich S (1999)Estudo da Influencia de Residuos Cataliticos na Degradafao de Plasticos Reciclados (Blenda HDPE/PPe PET) Provenientes de Lixo Urbano. Polimeros: Cienciae Tecnologia 9(4):189-194
23. Santana RC, Manrich S (2002) Studies on thermo-mechanical properties of post-consumer high impact polystyrene in five reprocessing steps. Prog Rubber Plast Recycl Technol 18(2):99-110
24. Soriano F, Morales G, Diaz De Leon R (2006) Recycling of high impact polystyrene in coextruded sheet: influence of the number of processing cycles on the microstructure and macroscopic properties. PolymEng Sci 46(12):1698-1705
25. Vilaplana F, Ribes-Greus A, Karlsson S (2006) Degradation of recycled high-impact polystyrene. simulation by reprocessing and thermo-oxidation. Polym Degrad Stab 91:2163-2170
26. Gabriel AP, Santana RMC, Veit HM (2013) Recycling of frames from CRT monitors with different years of manufacture. In: ISWA World Congress, 2013, Vienna
27. Kasper AC, Berselli GBT, Freitas BD, Bernardes AM, Veit HM (2010)Estudo da reciclagem das Blendas PC + ABSe PC + ABS +EPOXI provenientes de sucataseletronicas. Revista Brasileira de Ciencias Ambientais 16:26-35
28. Kasper AC, Bernardes AM, Veit HM (2010) Characterization and recovery of polymers from mobile phone scrap. Waste Manage Res 29(7):714-726
29. Taurino R, Pozzi P, Zanasi T (2010) Facile characterization of polymer fractions from wasteelectrical andelectronicequipment (WEEE) for mechanical recycling. Waste Manag 30:2601-2607
30. Juchneski NCF, Scherer J, Grochau IH, Veit HM (2013) Disassembly and characterization of liquid crystal screens. Waste Manag Res 31(6):549-558
31. Ravi V (2012)Evaluating overall quality of recycling ofe-waste fromend-of-life computers. J Clean Prod 20:145-151
32. Buchanan R (2004) Ceramic materials forelectronics, 3rdedn. Marcel Dekker Inc., New YorK
33. Callister WD (2007) Materials science andengineering: an introduction, 7thedn. Wiley, New York
34. Morris PR (1990) A history of the world semiconductor industry. Peter Peregrinus Ltd, London
35. Assefa S (2012) A 90 nm CMOS integrated nano-photonics technology for 25 Gbps WDM optical communications applications. IEEE IntElectr Devices Meeting, Maryland
36. Coombs C (2008) Printed circuits handbook, 6thedn. The McGraw-Hill Ltd, New York
37. Jawitz M (1997) Printed circuit board materials handbook. McGraw-Hill Ltd, New York
38. Wu J (2008)Electrostatic separation for recovering metals and nonmetals from waste printed circuit board: problems and improvements.Environ Sci Technol 42:5272-5276
39. Yokoyama S, Iji M (1997) Recycling of printed wiring boards with mountedelectronic parts. In: Proceedings of the 1997 IEEE international symposium, pp 109-114
40. Guo B (2008) A plate produced by nonmetallic materials of pulverized waste printed circuit boards.Environ Sci Technol 42:5267-5271
41. Sohaili J, Muniyandi SK, Mohamad SS (2012) A review on printed circuit boards waste recycling technologies and reuse of recovered nonmetallic materials. Int J SciEng Res 3(2):138-144
42. Crompton T (2000) Battery reference book, 3rdedn. ReedEducational and Professional Publishing, Woburn
43. Verhaeghe F (2011) Valorisation of battery recycling slags. 2nd International Slag Valorization Symposium. Leuven, Belgium
44. Niu X, Li Y (2007) Treatment of waste printed wire boards inelectronic waste for safe disposal. J Hazard Mater 145:410-416
45. Guo J (2008) Phenolic molding compound filled with nonmetals of waste PCBs.Environ Sci Technol 42:624-628
46. Guo J (2009) Manufacturing process of reproduction plate by nonmetallic materials reclaimed from pulverized printed circuit boards. J Hazard Mater 163:1019-1025
47. Zheng Y (2009) The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. J Hazard Mater 163:600-606
48. WorrellE, Reuter MA (2014) Handbook of recycling: state of the art for practitioners, analysts, and scientists.Elsevier Inc., Amsterdam
49. Hancock P (2011) Fluxing issues-container glass in sanitaryware applications. Asian Ceramics 50-53
50. Tucci A, Esposito L, Palmonari C, RambaldiE (2004) Use of soda-lime scrap glass as a fluxing agente in porcelain stoneware tile mix. JEur Ceram Soc 24:83-92
51. Benjarungroj P, Harrison P, Vaughan S, Ren XJ, Morgan M (2012) Investigation of thermally treated recycled glass as a vibratory mass finishing media. KeyEng Mater 496:104-109
52. Cui J, ForssbergE (2003) Mechanical recycling of wasteelectric andelectronicequipment: a review. J Hazard Mater 99:243-263
53. Kasper AC, Berselli GBT, Freitas BD, Tenorio JAS, Bernardes AM, Veit HM (2011) Printed wiring boards for mobile phones: characterization and recycling of copper. Waste Manag 31:2536-2545
54. Ladou J (2006) Printed circuit board industry. Int J HygieneEnviron Health 209:211-219
55. Hall WJ, Williams PT (2007) Separation and recovery of materials from scrap printed circuit boards. Resour Conserv Recycl 51:691-709
56. Zeng X, Zheng L, Xie HH, Lu B, Xia K, Chao K, Li W, Yang J, Lin S, Li J (2012) Current status and future perspective of waste printed circuit boards recycling. ProcediaEnviron Sci 16:590-597
57. Schlummer M, Gruber L, Maurer A, Wolz G, VanEldik R (2007) Characterization of polymer fractions from wasteelectrical andelectronicequipment (WEEE) and implications for waste management. Chemosphere 67:1866-1876
58. Lim SR, Schoenung JM (2010) Toxicity potentials from waste cellular phones, and a waste management policy integrating consumer, corporate, and government responsibilities. Waste Manag 30:1653-1660
59. Sepulveda A, Schluep M, Renaud FG, Streicher M, Kuehr R, Hageluken C, Gerecke AC A review of theenvironmental fate andeffects of hazardous substances released fromelectrical andelectronicequipments during recycling:examples from China and India.Environ Impact Assess Rev 30:28-41
60. Tsydenova O, Bengtsson M (2011) Chemical hazards associated with treatment of wasteelectrical andelectronicequipment. Waste Manag 31:45-58
61. Frazzoli C, Orisakwe OE, Dragone R, Mantovani A (2010) Diagnostic health risk assessment ofelectronic waste on the general population in developing countries’ scenarios.Environ Impact Assess Rev 30:388-399
62. Ongondo FO, Williams ID, Cherrett TJ (2011) How are WEEE doing? A global review of the management ofelectrical andelectronic wastes. Waste Manag 31:714-730
63. Wienold J, Recknagel S, Scharf H, Hoppe M, Michaelis M (2011)Elemental analysis of printed circuit boards considering the ROHS regulations. Waste Manag 31:530-535
64. Oliveira CM, Bernardes AM, Gerbase AE (2012) Collection and recycling ofelectronic scrap: a worldwide overview and comparison with the Brazilian situation. Waste Manag 32:1592-1610
65. Scharnhorst W, Hilty LM, Jolliet O (2006) Life cycle assessment of second generation (2G) and third generation (3G) mobile phone networks.Environ Int 32:656-675
66. Yu J, WilliamsE, Ju M (2010) Analysis of material andenergy consumption of mobile phones in China.Energy Policy 38:4135-4141
67. Long L, Sun S, Zhong S, Dai W, Liu J, Song W (2010) Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards. J Hazard Mater 177:626-632
68. Das A, Vidyadhar A, Mehrotra SP (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour Conserv Recycl 53:464-469
69. Roth T, Wolf M, Pohlein M, VanEldik R (2013) Analysis of flame retardants andelements of concern in printed wiring boards with respect to origin and year of construction. Anal Bioanal Chem 405:7215-7229
70. Norgate T, Haque N (2012) Using life cycle assessment toevaluate someenvironmental impacts of gold production. J Clean Prod 29-30:53-63
71. Hageluken C (2006) Improving metal returns andeco-efficiency inelectronics recycling. In: Proceedings of the 2006 IEEE international symposium onelectronics and theenvironment pp 218-223
72. Polak M, Drapalova L (2012)Estimation ofend of life mobile phones generation: the case study of the Czech Republic. Waste Manag 32:1583-1591
73. Zheng Y, Shen Z, Cai C, Ma S, Xing Y (2009) The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. J Hazard Mater 163:600-606
74. Veit HM, Pereira CC, Bernardes AM (2002) Using mechanical processing in recycling printed wiring boards. JOM 54:45-47
75. Hou S, He X, Yang D, Xu Z (2013) An impact crushing dynamic model of waste printed circuit board particles. Res Chem Intermed 39:3611-3630
76. Zhang S, ForssbergE (1997) Mechanical Separation-Oriented Characterization ofElectronic Scrap. Resour Conserv Recycl 21:247-269
77. Guo C, Wang H, Liang W, Fu J, Yi X (2011) Liberation characteristic and physical separation of printed circuit board (PCB). Waste Manag 31:2161-2166
78. Yoo JM, Jeong J, Yoo K, Lee JC, Kim W (2009)Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp Mill. Waste Manag 29:1132-1137
79. Duan C, Wen X, Shi C, Zhao Y, Wen B, He Y (2009) Recovery of metals from waste printed circuit boards by a mechanical method using a water medium. J Hazard Mater 166:478-482
80. Veit HM, Pereira CC, Horlle LF, Bernardes AM (2002) Recycling of metals from PCB by dense medium separation processes. In: Recycling and waste treatment in mineral and metal processing: technical andeconomic aspects, Lulea, Sweden
81. Svoboda J, Fujita T (2003) Recent developments in magnetic methods of material separation. MinerEng 16:785-792
82. Li J, Xu Z, Zhou Y (2007) Application of corona discharge andelectrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards. JElectrostat 65:233-238
83. Li J, Lu H, Xu Z, Zhou Y (2008) Critical rotational speed model of the rotating rollelectrode in coronaelectrostatic separation for recycling waste printed circuit boards. J Hazard Mater 154:331-336
84. Lu H, Li J, Guo J, Xu Z (2008) Movement behavior inelectrostatic separation: recycling of metal materials from waste printed circuit board. J Mater Process Technol 197:101-108
85. Zhang S, ForssbergE, Arvidson B, Moss W (1998) Separation mechanisms and criteria of a rotatingeddy-current separator operation. Resour Conserv Recycl 25:215-232
86. Zhang S, ForssbergE, Arvidson B, Moss W (1998) Aluminum recovery fromelectronic scrap by High-Force®eddy-current separators. Resour Conserv Recycl 23:225-241
87. Veit HM, Diehl TR, Salami AP, Rodrigues JS, Bernardes AM, Tenorio JAS (2005) Utilization of magnetic andelectrostatic separation in the recycling of printed circuit board scrap. Waste Manag 25(1):67-74
88. Veit HM, Bernardes AM, Ferreira JZ, Tenorio JAS, Malfatti CF (2006) Recovery of copper from printed circuit boards scraps by mechanical processing andelectrometallurgy. J Hazard Mater B137:1704-1709
89. Tuncuk A, Stazi V, Akcil A, YaziciEY, Deveci H (2002) Aqueous metal recovery techniques frome-scrap: hydrometallurgy in recycling. MinerEng 25:28-37
90. Kinoshita T, Akita S, Kobayashi N, Nii S, Kawaizumi F, Takahashi K (2003) Metal recovery from non-mounted printed wiring boards via hydrometallurgical processing. Hydrometallurgy 69:73-79
91. KimEY, Kim MS, Lee JC, Jha MK, Yoo K, Jeong J (2008)Effect of cuprous ions on Cu leaching in the recycling of waste PCBs, usingelectro-generated chlorine in hydrochloric acid solution. MinerEng 21:121-128
92. Jha MK, Choubey PK, Jha AK, Kumari A, Lee JC, Kumar V, Jeong J (2012) Leaching studies for tin recovery from wastee-scrap. Waste Manag 32:1919-1925
93. YaziciEY, Deveci H (2013)Extraction of metals from waste printed circuit boards (WPCBs) in H2SO4-CuSO4-NaCl solutions. Hydrometallurgy 139:30-38
94. Havlik T, Orac D, Petranikova M, Miskufova A, Kukurugya F, Takacova Z (2010) Leaching of copper and tin from used printed circuit boards after thermal treatment. J Hazard Mater 183:866-873
95. Park YJ, Fray DJ (2009) Recovery of high purity precious metals from printed circuit boards. J Hazard Mater 164:1152-1158
96. Zhang Y, Liu S, Xie H, Zeng X, Li J (2012) Current status on leaching precious metals from waste printed circuit boards. ProcediaEnviron Sci 16:560-568
97. Jing-Ying L, Xiu-Li X, Wen-Quan L (2012) Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. Waste Manag 32:1209-1212
98. Gurung M, Adhikari BB, Kawakita H, Ohto K, Inoue K, Alam S (2013) Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin. Hydrometallurgy 133:84-93
99. Birloaga I, De Michelis I, Ferella F, Buzatu M, Veglio F (2013) Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery. Waste Manag 33:935-941
100. Oh CJ, Lee SO, Yang HS, Ha TJ, Kim MJ (2003) Selective leaching of valuable metals from waste printed circuit boards. Air & Waste Manag Assoc 53:897-902
101. Ha VH, Lee J, Jeong J, Hai HT, Jha MK (2010) Thiosulfate leaching of gold from waste mobile phones. J Hazard Mater 178:1115-1119
102. Syed S (2012) Recovery of gold from secondary sources-A review. Hydrometallurgy 115-116:30-51
103. Scott K, Chen X, Atkinson JW, Todd M, Armstrong RD (1997)Electrochemical recycling of tin, lead and copper from stripping solution in the manufacture of circuit boards. Resour Conserv Recycl 20:43-55
104. Fleming CA (1992) Hydrometallurgy of precious metals recovery. Hydrometallurgy 30:127-162
105. Sulka GD, Jaskula M (2002) Study of the kinetics of the cementation of silver ions onto copper in a rotating cylinder systemfromacidic sulphate solutions. Hydrometallurgy 64:13-33
106. Choo WL, Jeffrey MI (2004) Anelectrochemical study of copper cementation of gold(I) thiosulfate. Hydrometallurgy 71:351-362
107. Cui J, Zhang L (2008) Metallurgical recovery of metals fromelectronic waste: a review. J Hazard Mater 158:228-256
108. Cortina JL, MeinhardtE, Roijals O, Marti V (1998) Modification and preparation of polymeric adsorbents for precious-metalextraction in hydrometallurgical processes. React Funct Polym 36:149-165
109. Nakbanpote W, Thiravetyan P, Kalambaheti C (2000) Preconcentration of gold by rice husk ash. MinerEng 13:391-400
110. Chand R, Watari T, Inoue K, Kawakita H, Luitel HN, Parajuli D, Torikai T, Yada M (2009) Selective adsorption of precious metals from hydrochloric acid solutions using porous carbon prepared from barley straw and rice husk. MinerEng 22:1277-1282
111. Zhang H, Ritchie IM, La Brooy SR (2004) The adsorption of gold thiourea complex onto activated carbon. Hydrometallurgy 72(3-4):291-301
112. Wang J, Bai J, Xu J, Liang B (2009) Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J Hazard Mater 172:1100-1105
113. Xiang Y, Wu P, Zhu N, Zhang T, Liu W, Wu J, Li P (2010) Bioleaching of copper from waste printed circuit boards by bacterial consortiumenriched from acid mine drainage. J Hazard Mater 184:812-818
114. Ilyas S, Anwar MA, Niazi SB, Ghauri MA (2007) Bioleaching of metals fromelectronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy 88:180-188
115. Santos FHS (2010) Residuos de origemeletronicaSerie Tecnologia Ambiental 57. Rio de JaneiroCETEM/MCT
116. Zhu N, Xiang Y, Zhang T, Wu P, Dang Z, Li P, Wu J (2011) Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bacteria. J Hazard Mater 192:614-619
117. Hoffmann JE (1992) Recovering precious metals fromelectronic scrap. JOM 44(7):43-48
118. Lee JC, Song HT, Yoo JM (2007) Present status of the recycling of wasteelectrical andelectronicequipment in Korea. Resour Conserv Recycl 50(4):380-397
119. SumEYL (1991) The recovery of metals fromelectronic scrap. JOM 43(4):53-61
120. Zhou Y, Qiu K (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater 175:823-828
121. De Marco I, Caballero BM, Chomon MJ, Laresgoiti MF, Torres A, Fernandez G, Arnaiz S (2008) Pyrolysis ofelectrical andelectronic wastes. J Anal Appl Pyrol 82:179-183
122. Hall WJ, Williams PT (2007) Separation and recovery of materials from scrap printed circuit boards. Resour Conserv Recycl 51:691-709
123. Quan C, Li A, Gao N, Dan Z (2010) Characterization of products recycling from PCB waste pyrolysis. J Anal Appl Pyrol 89:102-106
124. Zhou Y, Wu W, Qiu K (2010) Recovery of materials from waste printed circuit boards by vacuum pyrolysis and vacuum centrifugal separation. Waste Manag 30:2299-2304
125. Flandinet L, Tedjar F, Ghetta V, Fouletier J (2012) Metals recovering from waste printed circuit boards (WPCBs) using molten salts. J Hazard Mater 213-214:485-490
126. Miller FP, Vandome AF, Mcbrewster J (2009) Cathode ray tube. Alphascript Publishing, ISBN 6130087101
127. Medical discoveries. Cathode ray tube (CRT). Available at http://www.discoveriesinmedicine.com/Bar-Cod/Cathode-Ray-Tube-CRT.html. Accessed 13 Jun 2014
128. Polsson K (2014) Chronology of personal computers. Available at http://pctimeline.info. Accessed 13 Jun 2014
129. Rahim Z (1989) Texas instruments understanding the operation of a CRT Monitor. Available at http://www.ti.com/lit/an/snla017/snla017.pdf. Accessed 13 Jun 2014
130. Keller P (1991) The cathode-ray tube, technology, history, and applications, Edn 1. Palisades Press
131. Holms A (2005) An introduction to the cathode ray tube. CRT report. University of California. Available at http://www.writing.ucsb.edu/faculty/holms/2E_CRT_report_2.pdf. Accessed 13 Jun 2014
132. Ozawa L (1990) Cathodoluminescence: theory and applications, Edn 1. Kodansha
133. Lee CH (2000) Management of scrap computer recycling in Taiwan. J Hazard Mater A73:209-220
134. Socolof ML (2005)Environmental life-cycle impacts of CRT and LCD desktop computer displays. J Clean Prod 13:1281-1294
135. Nnorom IC, Osibanjo O, Ogwuegbu MOC (2011) Global disposal strategies for waste cathode ray tubes. Resour Conserv Recycl 55:275-290
136. Dexpert-Ghys J (2009) Re-processing CRT phosphors for mercury-free applications. J Lumin 129:1968-1972
137. Parr G, Davie H (1959) The cathode ray tube and its applications, Edn 3. Butler
138. Food and Drug Adminstration U.S. (2012) Code of Federal Regulations Title 21Part 1020 performance standards for ionizing radiationemitting products. Available at http://www.acce ssdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?fr=1020.20. Accessed 13 Jun 2014
139. Lee CH, Hsi CS (2002) Recycling of scrap cathode ray tubes.Environ Sci Technol 36:69-75
140. Townsend T (2004) RCRA toxicity characterization of computer CPUs and other discardedelectronic devices. State University System of Florida, Florida Center for Solid and Hazardous Waste Management, p 79
141. Musson SE (2000) Characterization of lead leachability from cathode ray tubes using the toxicity characteristic leaching procedure.Environ Sci Technol 34:4376-4381
142. Menad N (1999) Cathode ray tube recycling. Resour Conserv Recycl 26:143-154
143. Qingbo Xu, Li Guangming, He Wenzhi, Huang Juwen, Shi Xiang (2012) Cathode ray tube (CRT) recycling: current capabilities in China and research progress. Waste Manag 32:1566-1574
144. Herat S. Recycling of cathode ray tubes (CRTs) inelectronic waste. Available on http://www98.griffith.edu.au/dspace/bitstream/handle/10072/22550/52113_1.pdf;jsessionid = 15070CD1298A959A9B6928D111C2057A?sequence= 1
145. Icer (2004) Materials recovery from waste cathode ray tubes (CRTs). The Waste & Resources Action Programme. ISBN: 1-84405-077-7
146. Lee C, His C (2002) Recycling of scrap cathode ray tubes.Environ Sci Technol 36:69-75
147. BernardoE (2009) Glass based stoneware as a promising route for the recycling of waste glasses. Adv Appl Ceram 108(1):2-8
148. Mear F, Yot P, Ribes M (2006)Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste funnel glasses. Mater Lett 60:929-934
149. Guo HW, Gong YX, Gao SY (2010) Preparation of high strength foam glass-ceramics from waste cathode ray tube. Mater Lett 64:997-999
150. Guo HW, Gong YX, Gao SY Project code: GLA15-006 (2004) Materials recovery from waste cathode ray tubes (CRTs), The Waste and Resource Action Programme. ICER, UK
151. Hreglich S, Falcone R, Vallotto M (2001) The recycling ofEOL panel glass from TV sets in glass fibres and ceramic productions. In: Proceedings of the international symposium on recycling and reuse of glass cullet, pp 123-134
152. Weiand W, Merz R, Bonk K (1992) Glaze additives: 30 years ago to today. Tile Brick 1(8):14-17
153. Piccagliani V (2002) Preliminary study of the reuse of CRT glass in the ceramic field, materialsEng. Degree thesis, Modena and ReggioEmilia University
154. Nulife Glass (2013) Recycling CRTs from televisions & computer screens. Available at http://www.nulifeglass.com/. Accessed 13 Jun 2014
155. Sweep Kuusakoski (2013). Available at http://www.sweeepkuusakoski.co.uk/. Accessed 12 Jun 2014
156. den Boer W (2005) Active matrix liquid crystal displays.Elsevier, Amsterdam
157. Mester A, Fraunholcz N, Van Schaik A, Reuter MA (2005) Characterization of the hazardous components inend-of-life notebook display. In: Light metals 2005, Canada
158. King CountySolid Waste Division (2008) Flat panel displays:end of life management report. Available on http://your.kingcounty.gov/solidwaste/takeitback/electronics/documents /FPDReport.pdf. Accessed 10 Jun 2014
159. ReinhardE, Ward G, Pattanaik S, Debevec P (2006) High dynamic range imaging: acquisition, display and image-based lighting.Elsevier, Amsterdam
160. Smith JR (2005) Programming the PIC microcontroller with MBASIC.Elsevier, Amsterdam
161. Chen RH (2011) Liquid crystal displays. Wiley, Hoboken
162. Heckmeier M, Lussem G, Tarumi K, Becker W (2002) Liquid crystals for active matrix displays. Available on http://www.emdmillipore.com/showBrochure/200908.037.ProNet.pdf. Accessed 05 Jun 2014
163. Hunt AJ, Clark JH, Breeden SW, Matharu AS, Ellis C, Goodby JW, Bottomley JA, Cowling SJ (2008)Extraction of liquid crystals from flat panel display devices using both liquid and supercritical carbon dioxide. Available on http://www.isasf.net/fileadmin/files/Docs/Barcelona/ISASF%202008/PDF/Key%20notes/KN_PR_5.pdf. Accessed 05 Jun 2014
164. Martin R, Simon-Hettich B, Becker W (2004) NewEU Legislation (WEEE) compliant recovery processes for LCDs. Presented at 11th international display workshop, IDW, Germany
165. Becker W, Simon-Hettich B, Honicke P (2003) Toxicological andecotoxicological investigations of liquid crystals and disposal of LCDs. In: Presented at 11th international display workshop, IDW, Germany
166. Ryan A, O’Donoghue L, Lewis H (2011) Characterizing components of liquid crystal displays to facilitate disassembly. J Clean Prod 19:1066-1071
167. Buzatu M, Milea NB (2008) Recycling the liquid crystal displays. UPB Sci Bull Ser B 70(4):93-102
168. Buzatu M, Milea NBWeee & Hazardous Waste (2004) AEA TechnologyEnvironment. http://archive.defra.gov.uk/environment/waste/producer/electrical/documents/weee-hazwaste.pdf. Accessed 13 Jun 2014
169. Becker W, Simon-Hettich B, Honicke P (2007) Toxicological andecotoxicological investigations of liquid crystals. Available on http://www.emdmillipore.com/showBrochure ?id=200810.029. Accessed 13 Jun 2014
170. LCD Industries Research Committee (LIREC) (2013) Japanelectronics and information technology industries associationenvironment and safety activities. Available on http://www.jeita.or.jp/english/about/2012/profile_en_2012.pdf. Accessed 13 Jun 2014
171. Chou WL, Huang YH (2009)Electrochemical removal of indium ions from aqueous solution using ironelectrodes. J Hazard Mater 172:46-53
172. Talens PL, Villalba MG (2013) Material flow analysis of scarce metals: sources, functions, end-uses, and aspects for future supply.Environ Sci Technol 47(6):2939-2947
173. Tolcin AC (2008) Minerals Yearbook-Indium. Available on http://minerals.usgs.gov/miner-als/pubs/commodity/indium/myb1-2008-indiu.pdf. Accessed 13 Jun 2014
174. Ryoshi K, Hattori Y, Kobayashi H (2008) Method of manufacturing powder containing indium oxide as a main component. Japanese Patent JP2008137825
175. Yoshioka K, Nakajima T (1994) Source of total factor productivity for Japanese manufacturing industry: 1962-1988. Keiko University, Tokyo
176. Buchert M, Schueler D (2009) Critical metals for future sustainable technologies and their recycling potential, Sustainable innovation and technology transfer industrial sector studies. Unep, Nairobi
177. UNEP (2011) Recycling rates of metals-a status report. Available at http://www.unep.org/reso urcepanel/Portals/24102/PDFs/Metals_Recycling_Rates_110412-1.pdf. Accessed 03 Set 2014
178. Virolainen S, Ibana D, PaateroE (2011) Recovery of indium from indium tin oxide by solventextraction. Hydrometallurgy 107:56-61