Tribomechanical studies on PLD grown DLC/Ni multilayers

Proceedings of the International Conference on Nanoscience, Engineering and Technology, ICONSET 2011

Volumn , Issue , 2011, Pages 524-527

  Krishnan, R ^a   Kumar, N ^a   Ravindran, T R ^a   Dash, S ^a   Tyagi, A K ^a   Raj, Baldev ^a   Gayathri, S ^b   Sridharan, M ^b  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

^b SASTRA UNIVERSITY   (India)

Author keywords

DLC; Friction; Nanoindentation; Raman spectroscopy

Indexed keywords

FRICTION; NANOINDENTATION; PULSED LASER DEPOSITION; RAMAN SPECTROSCOPY; TRIBOLOGY;

BI-LAYER; DIAMOND LIKE CARBON; DLC; LOW COEFFICIENT OF FRICTION; LOW FRICTION COEFFICIENTS; NI INTERLAYERS; TRIBOFILMS;

MULTILAYERS;

EID: 84928395798     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICONSET.2011.6168022     Document Type: Conference Paper

References (32)

1. J. Robertson, "Diamond-like amorphous carbon," Mater. Sci. Eng. R: Reports, vol.37, pp 129-281, May 2002.
2. R.K. Roy, S.F. Ahmed, J.W. Yi, M.W. Moon, K.R. Lee and Y. Jun, "Improvement adhesion of DLC coating on nitinol substrate by hybrid ion beam deposition technique," Vacuum, vol. 83, pp.1179-1183,May 2009.
3. C. Corbella,G. Oncins, M.A. Gómez, M.C. Polo, E. Pascual, J. García-Céspedes, J.L. Andújar and E. Bertran, "Structure of diamond-like carbon films containing transition metals deposited by reactive magnetron sputtering", Diam. Relat. Mater. Vol.14, pp.1103-1107, July 2005.
4. A.A. Voevodin, M.S. Donley, "Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review",Surf. Coat. Technol. Vol.82, pp.199-213, August 1996.
5. C.P. Lungu, I. Mustata, G. Musa, V. Zaroschi, A. Mihaela Lungu and K. Iwasaki, "Low friction silver-DLC coatings prepared by thermionic vacuum arc method", Vacuum, vol. 76, pp.127-130, November 2004.
6. D. Caschera, F. Federici, S. Kaciulis, L. Pandolfi, A. Cusmà and G. Padeletti, "Deposition of Ti-containing diamond-like carbon (DLC) films by PECVD technique," Mater. Sci. Eng. C, vol.27, pp. 1328-1330, September 2007.
7. J. Wasyluk, T.S. Perova, D.W.M. Lau, M.B. Taylor, D.G. McCulloch and J. Stopford, "Ultraviolet and visible Raman analysis of thin a-C films grown by filtered cathodic arc deposition, " Diam. Relat. Mater., vol.19, pp. 514-517, June 2010.
8. A.A.Voevodin and J.S. Zabinski, "Superhard, functionally gradient, nanolayered and nanocomposite diamond-like carbon coatings for wear protection," Diam. Relat. Mater. vol.7, pp.463-467, Feburary 1998.
9. D.B.B Hsiao-chu Tsai, "Characterization of diamondlike carbon films and their application as overcoats on thin-film media for magnetic recording," J. Vac. Sci. Technol. A, vol. 5, pp. 3287-3313, 1987.
10. G.A. Cirino, R.D. Mansano, P. Verdonck, R.G. Jasinevicius and L.G. Neto, "Diffraction gratings fabricated in DLC thin films," Surf. Coat. Technol., vol.204, pp. 2966-2970 June 2010.
11. A.S. Loir, F. Garrelie, C. Donnet, M. Belin, B. Forest, F. Rogemond and P. Laporte, "Deposition of tetrahedral diamond-like carbon thin films by femtosecond laser ablation for applications of hip joints," Thin Solid Films, vol.453-454, pp. 531-536, April 2004.
12. R.J. Narayan, "Nanostructured diamondlike carbon thin films for medical applications," Mater. Sci. Eng. C,vol. 25, pp.405-416, May 2005.
13. S. Zhang, H.T. Johnson, G.J. Wagner, W.K. Liu and K.J. Hsia,"Stress generation mechanisms in carbon thin films grown by ion-beam deposition," Acta Mater.,vol.51, pp. 5211-22, October 2003.
14. R.J. Narayan, "Pulsed laser deposition of functionally gradient diamondlike carbon-metal nanocomposites," Diam. Relat. Mater., vol.14, pp. 1319-30,August 2005.
15. V. Singh, J.C. Jiang and E. I. Meletis, " Cr-diamondlike carbon nanocomposite films: Synthesis, characterization and properties," Thin Solid Films, vol.489, pp. 150-8, October 2005.
16. C. Seung Lee , K.R. Lee, K. Yong Eun, K. Hyun Yoon and J. Hee Han, "Structure and properties of Si incorporated tetrahedral amorphous carbon films prepared by hybrid filtered vacuum arc process", Diam. Relat. Mater. vol.11, pp.198-203, 2002.
17. B. Shi, W.J. Meng, L.E. Rehna and P.M. Baldo, "Intrinsic stress development in Ti-C:H ceramic nanocomposite coating," Appl. Phys. Lett.,vol. 81,pp. 352-4, Feberuary 2002.
18. S.J. Park, K. R. Lee, D.H. Ko and K.Y. Eun, "Microstructure and mechanical properties of WC-C nanocomposite films," Diam. Relat. Mater., vol.11, pp. 1747-52,October 2002.
19. A.Y. Wang, K. R. Lee, J. P. Ahn, and J. H. Han, "Structure and mechanical properties of W incorporated diamond-like carbon films prepared by a hybrid ion beam deposition technique," Carbon , vol.44, pp. 1826-32, August 2006.
20. L. Ji, H. Li, F. Zhao, J. Chen and H.Zhou, "Microstructure and mechanical properties of Mo/DLC nanocomposite films," Diam. Relat. Mater. vol.17, pp.1949-54, November 2008.
21. R. Koppert, D. Goettel, O. Freitag-Weber,and G. Schultes, " Nickel containing diamond like carbon thin films" Solid State Sciences, vol.11, pp. 1797-800, April 2009.
22. N.W. Khun, E. Liu and G.C.Yang, "Structure, scratch resistance and corrosion performance of nickel doped diamond-like carbon thin films", Surf. Coat. Technol., vol.204, pp.3125-30, July 2010.
23. G. Schultes, P. Frey, D. Goettel and O.Freitag-Weber, "Strain sensitivity of nickel-containing amorphous hydrogenated carbon (Ni:a-C:H) thin films prepared by r.f. sputtering using substrate bias conditions", Diam. Relat. Mater., vol.15,pp. 80-9, January 2006.
24. M. Bobeth, R. Krawietz, H. Mai, W. Pompe, A. Sewin and J. Thomas, "Morphological transition in Ni/C nanoscale multilayers", Solid State Ionics , vol. 101-103, pp.279-84, November 1997.
25. A.Sewing, A.A. Gorbunov, W. Pompe, R. Dietsch, H. Mai, R. Krawietz and B.Weimer, "Formation of ordered arrays of metal clusters by annealing of NM-period metal-carbon multilayer films", Nanostruct. Mater., vol.6, pp.695-8, December 1995.
26. W.C. Olive, G.M. Pharr, "Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology,"J. Mater. Res., vol.19,pp.3-20, 2004.
27. A.C. Ferrari and J. Robertson, " Interpretation of Raman spectra of disordered and amorphous carbon", Phys. Rev. B, vol.61, pp.14095-107, May 2000.
28. Q. Wei, A.K. Sharma, J. Sankar and J. Narayan, "Mechanical properties of diamond-like carbon composite thin films prepared by pulsed laser deposition", Composites Part B: Eng.,vol.30, pp.675-84,October 1999.
29. Zhang Zhen-Yu, Lu Xin-Chun and L. Jian-Bin, "Tribological properties of diamond-like carbon films deposited by pulsed laser arc deposition", Chinese Physics, vol.16, pp. 3790-08, 2007.
30. D.G. Liu, J.P. Tu ,H. Zhang, R. Chen and C.D. Gu, "Microstructure and mechanical properties of carbon nitride multilayer films deposited by DC magnetron sputtering",Surf. Coat. Technol., vol.205, pp.3080-6, 2011.
31. M. Gioti, S. Logothetidis and C. Charitidis, "Stress relaxation and stability in thick amorphous carbon films deposited in layer structure", Appl. Phys. Lett., vol.73, pp.184-6, July 1998.
32. C. Mathioudakis, P.C. Kelires, Y. Panagiotatos, P. Patsalas , C. Charitidis and S. Logothetidis, "Nanomechanical properties of multilayered amorphous carbon structures. Phys. Rev. B, vol.65, pp.205203-17, May2002.