Enabling health monitoring approach based on vibration data for accurate prognostics

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 1, 2015, Pages 647-656

  Javed, Kamran ^a,b   Gouriveau, Rafael ^a,b   Zerhouni, Noureddine ^a,c   Nectoux, Patrick ^a  

^a FEMTO ST INSTITUTE   (France)

^b CNRS   (France)

^c Centre National de la Recherche Scientifique   (France)

Author keywords

Data driven; feature extraction; monitoring; prognostics

Indexed keywords

COMPUTER CONTROL SYSTEMS; DISCRETE WAVELET TRANSFORMS; EXTRACTION; FEATURE EXTRACTION; HEALTH; LEARNING SYSTEMS; MONITORING; SYSTEMS ENGINEERING; WAVELET ANALYSIS;

COMPUTER NUMERICAL CONTROL MACHINES; DATA DRIVEN; EXTREME LEARNING MACHINE; FEATURE EXTRACTION/SELECTION; PROGNOSTICS; PROGNOSTICS AND HEALTH MANAGEMENTS; TIME FREQUENCY ANALYSIS; TRIGONOMETRIC FUNCTIONS;

CUTTING TOOLS;

EID: 84919934435     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2327917     Document Type: Article

References (43)

1. W. Wang and M. Pecht, "Economic analysis of canary-based prognostics and health management," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 3077-3089, Jul. 2011.
2. J. Coble and J. W. Hines, "Applying the general path model to estimation of remaining useful life," Int. J. Prognostics Health Manage., vol. 2, pp. 1-13, 2011.
3. N. Gebraeel, M. Lawley, R. Liu, and V. Parmeshwaran, "Residual life predictions from vibration-based degradation signals: A neural network approach," IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 694-700, Jun. 2004.
4. ?. B. Jakovljevíc, "Comparative analysis of Hilbert Huang and discrete wavelet transform in processing of signals obtained from the cutting process: An intermittent turning example," FME Trans., vol. 41, no. 4, pp. 342-348, 2013.
5. E. Zio, "Prognostics and health management of industrial equipment," in Diagnostics and Prognostics of Engineering Systems: Methods and Techniques, S. Kadry, Ed. Hershey, PA, USA: IGI Global, 2012, pp. 333-356.
6. A. Heng and S. Zhang, "Rotating machinery prognostic: State of the art, challenges and opportunities," Mech. Syst. Signal Process., vol. 23, no. 6, pp. 724-739, Apr. 2009.
7. A. K. S. Jardine, D. Lin, and D. Banjevic, "A review on machinery diagnostics and prognostics implementing condition-based maintenance," Mech. Syst. Signal Process., vol. 20, no. 7, pp. 1483-1510, Oct. 2006.
8. J. Sikorska, M. Hodkiewicz, and L. Ma, "Prognostic modeling options for remaining useful life estimation by industry," Mech. Syst. Signal Process., vol. 25, no. 5, pp. 1803-1836, Jul. 2011.
9. S. Yin, H. Luo, and S. Ding, "Real-time implementation of fault-tolerant control systems with performance optimization," IEEE Trans. Ind. Electron., vol. 61, no. 5, pp. 2402-2411, May 2014.
10. K. Javed, R. Gouriveau, and N. Zerhouni, "Novel failure prognostics approach with dynamic thresholds for machine degradation," in Proc. 39th IEEE IECON, Vienna, Austria, 2013, pp. 4404-4409.
11. F. Camci, K. Medjaher, N. Zerhouni, and P. Nectoux, "Feature evaluation for effective bearing prognostics," Qual. Reliab. Eng. Int., vol. 29, no. 4, pp. 477-486, Jun. 2013.
12. S. Kumar and M. Pecht, "Modeling approaches for prognostics and health management of electronics," Int. J. Performability Eng., vol. 6, no. 5, pp. 467-476, Sep. 2010.
13. K. Javed, R. Gouriveau, N. Zerhouni, and P. Nectoux, "A feature extraction procedure based on trigonometric functions and cumulative descriptors to enhance prognostics modeling," in Proc. IEEE Int. Conf. Prognostics Health Manage., Gaithersburg, MD, USA, 2013, pp. 1-7.
14. L. Liao, "Discovering prognostic features using genetic programming in remaining useful life prediction," IEEE Trans. Ind. Electron., vol. 61, no. 5, pp. 2464-2472, May 2014.
15. M. Lebold and M. Thurston, "Open standards for condition-based maintenance and prognostics systems," in Proc. 5th Annu. Maintenance Rel. Conf., Knoxville, TN, USA, 2001.
16. W. Yan, H. Qiu, and N. Iyer, "Feature extraction for bearing Prognostics And Health Management (PHM)-A survey," presented at the 62nd Meeting Society Machinery, Virginia Beach, VA, USA, 2008.
17. J. Yu, "A hybrid feature selection scheme and self-organizing map model for machine health assessment," Appl. Soft Comput., vol. 11, no. 5, pp. 4041-4054, Jul. 2011.
18. C. K. Chui, An Introduction to Wavelets, vol. 1. San Diego, CA, USA: Academic, 1992.
19. N. E. Huang et al., "The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis," Proc. R. Soc. Lond. A, Math. Phys. Sci., vol. 454, no. 1971, pp. 903-995, Mar. 1998.
20. B. Chen et al., "Fault feature extraction of gearbox by using overcomplete rational dilation discrete wavelet transform on signals measured from vibration sensors," Mech. Syst. Signal Process., vol. 33, pp. 275-298, Nov. 2012.
21. Y. Lei, J. Lin, Z. He, and M. J. Zuo, "A review on empirical mode decomposition in fault diagnosis of rotating machinery," Mech. Syst. Signal Process., vol. 35, no. 1/2, pp. 108-126, Feb. 2013.
22. P. Flandrin, G. Rilling, and P. Goncalves, "Empirical mode decomposition as a filter bank," IEEE Signal Process. Lett., vol. 11, no. 2, pp. 112-114, Feb. 2004.
23. S. Olhede and A.Walden, "The Hilbert spectrum via wavelet projections," Proc. R. Soc. Lond. A, Math. Phys. Sci., vol. 460, no. 2044, pp. 955-975, Apr. 2004.
24. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
25. P. Nectoux et al., "Pronostia: An experimental platform for bearings accelerated life test," in Proc. IEEE Int. Conf. Prognostics Health Manag., Denver, CO, USA, 2012, pp. 1-8.
26. T. Benkedjouh, K. Medjaher, N. Zerhouni, and S. Rechak, "Health assessment and life prediction of cutting tools based on support vector regression," J. Intell. Manuf., to be published. DOI: 10.1007/s10845-013-0774-6.
27. H. Bendjama, S. Bouhouche, and M.S. Boucherit, "Application of wavelet transform for fault diagnosis in rotating machinery," Int. J. Mach. Learn. Comput., vol. 2, no. 1, pp. 82-87, Feb. 2012.
28. S. G. MALLAT, "A theory for multiresolution signal decomposition: The wavelet representation," IEEE Trans. Pattern Anal. Mach. Intell., vol. 11, no. 7, pp. 674-693, Jul. 1989.
29. D. Tobon-Mejia, K. Medjaher, N. Zerhouni, and G. Tripot, "A data-driven failure prognostics method based on mixture of Gaussians hiddenMarkov models," IEEE Trans. Rel., vol. 61, no. 2, pp. 491-503, Jun. 2012.
30. J. Iwaniec, W. Lisowski, and T. Uhl, "Nonparametric approach to improvement of quality of modal parameters estimation," J. Theor. Appl. Mech., vol. 43, no. 2, pp. 327-344, 2005.
31. R. Gouriveau and N. Zerhouni, "Connexionist-systems-based long term prediction approaches for prognostics," IEEE Trans. Rel., vol. 61, no. 4, pp. 909-920, Dec. 2012.
32. M. R. Meireles, P. E. Almeida, and M. G. Simões, "A comprehensive review for industrial applicability of artificial neural networks," IEEE Trans. Ind. Electron., vol. 50, no. 3, pp. 585-601, Jun. 2003.
33. G.-B. Huang, Q.-Y. Zhu, and C.-K. Siew, "Extreme learning machine: A new learning scheme of feedforward neural networks," in Proc. Int. Joint Conf. Neural Netw., Budapest, Hungary, 2004, pp. 985-990.
34. K. Javed, R. Gouriveau, and N. Zerhouni, "SW-ELM: A summation wavelet extreme learning machine algorithm with a priori parameter initialization," Neurocomputing, vol. 123, pp. 299-307, Jan. 2014.
35. M.-B. Li, G.-B. Huang, P. Saratchandran, and N. Sundararajan, "Fully complex extreme learning machine," Neurocomputing, vol. 68, pp. 306-314, Oct. 2005.
36. A. Pourtaghi and M. Lotfollahi-Yaghin, "Wavenet ability assessment in comparison to ANN for predicting the maximum surface settlement caused by tunneling," Tunneling Underground Space Technol., vol. 28, pp. 257-271, Mar. 2012.
37. Y. Oussar and G. Dreyfus, "Initialization by selection for wavelet network training," Neurocomputing, vol. 34, no. 1-4, pp. 131-143, Sep. 2000.
38. D. Nguyen and B. Widrow, "Improving the learning speed of 2-layer neural networks by choosing initial values of the adaptive weights," in Proc. IJCNN, San Diego, CA, USA, 1990, pp. 21-26.
39. PHM 2010 Data Challenge. [Online]. Available: https://www.phmsociety. org/competition/phm/10
40. IEEE PHM 2012 Data Challenge. [Online]. Available: http://www. femto-st.fr/f/d/IEEEPHM2012-Challenge-Details.pdf
41. F. Ding and Z. He, "Cutting tool wear monitoring for reliability analysis using proportional hazards model," Int. J. Manuf. Technol., vol. 57, no. 5-8, pp. 565-574, Nov. 2011.
42. B. Zhang et al., "A probabilistic fault detection approach: Application to bearing fault detection," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 2011-2018, May 2011.
43. N. Fang, P. S. Pai, and N. Edwards, "Tool-edge wear and wavelet packet transform analysis in high-speed machining of Inconel 718," J. Mech. Eng., vol. 58, no. 3, pp. 191-202, 2012.