Tool-edge wear and wavelet packet transform analysis in high-speed machining of inconel 718

Strojniski Vestnik/Journal of Mechanical Engineering

Volumn 58, Issue 3, 2012, Pages 191-202

  Fang, Ning ^a   Pai, P Srinivasa ^a   Edwards, Nathan ^a  

^a UTAH STATE UNIVERSITY   (United States)

Author keywords

Cutting forces; Cutting vibrations; High speed machining; Inconel 718; Tool edge wear; Wavelet packet transform

Indexed keywords

CUTTING FORCES; CUTTING VIBRATIONS; HIGH SPEED MACHINING; INCONEL-718; WAVELET PACKET TRANSFORMS;

CUTTING TOOLS; FREQUENCY BANDS; TIME DOMAIN ANALYSIS;

MACHINING;

EID: 84859559564     PISSN: 00392480     EISSN: None     Source Type: Journal    
DOI: 10.5545/sv-jme.2011.063     Document Type: Article

References (29)

1. Liu, K., Li, X.P., Rahman, M., Liu, X.D. (2003). CBN tool wear in ductile cutting of tungsten carbide. Wear, vol. 255, no. 2, p. 1344-1351, DOI:10.1016/S0043-1648(03)00061-9. (Pubitemid 36990855)
2. Kopac, J. (2004). Cutting-tool wear during high-speed cutting. Strojniški vestnik -Journal of Mechanical Engineering, vol. 50, no. 4, p. 195-205.
3. Antic, A., Hodolic, J., Sokovic, M. (2006). Development of a neural-networks tool-wear monitoring system for a turning process. Strojniški Vestnik -Journal of Mechanical Engineering, vol. 52, no. 11, p. 763-776. (Pubitemid 44925507)
4. Shaw, M.C. (2005). Metal cutting principles, 2nd ed. Oxford University Press, New York.
5. Trent, W.M., Wright, P.K. (2000). Metal cutting, 4th ed., Butterworth-Heinemann, Woburn
6. Kumar, B.V.M., Kumar, J.R., Basu, B. (2007). Crater wear mechanisms of TiCN-Ni-WC cermets during dry machining. International Journal of Refractory Metals and Hard Materials, vol. 25, no. 5-6, p. 392-399, DOI:10.1016/j.ijrmhm. 2006.12.001. (Pubitemid 47361481)
7. Subramanian, S.V., Ingel, S.S., Kay, D.A.R. (1993). Design of coatings to minimize tool crater wear. Surface Coating Technology, vol. 61, no. 1-3, p. 293-299, DOI:10.1016/0257-8972(93)90241-F.
8. Dutta, A.K., Chattopadhyaya, A.B., Ray, K.K. (2006). Progressive flank wear and machining performance of silver toughened alumina cutting tool inserts. Wear, vol. 261, no. 7-8, p. 885-895, DOI:10.1016/j. wear.2006.01.038. (Pubitemid 44419508)
9. Lim, S.C., Lim, C.Y.H., Lee, K.S. (1995). The effects of machining conditions on the flank wear of TiNcoated high-speed steel tool inserts. Wear, vol. 181, no. 1-2, p. 901-912, DOI:10.1016/0043-1648(95)80019-0.
10. Sarwar, M., Persson, M., Hellbergh, H. (2009). Wear of the cutting edge in the bandsawing operation when cutting austenitic 17-7 stainless steel. Wear, vol. 263, no. 7, p. 1438-1441, DOI:10.1016/j.wear.2006.12.066. (Pubitemid 47284347)
11. Wu, Q., Fang, N. (2006). Effect of tool-edge wear in high-speed machining of superalloy Inconel 718. Transactions of North America Manufacturing Research Institution, vol. 34, p. 397-402.
12. Li, X., Wu, J. (2000). Wavelet analysis of acoustic emission signals in boring. Journal of Engineering Manufacture, vol. 214, no. 5, p. 421-424, DOI:10.1243/0954405001518206.
13. Xu, C.W., Chen, H.L., Liu, Z., Cheng, Z.W. (2009). Condition monitoring of milling tool wear based on facture dimension of vibration signals. Strojniški Vestnik -Journal of Mechanical Engineering, vol. 55, no. 1, p. 15-25.
14. Patra, K., Pal, S.K., Bhattacharyya, K. (2007). Application of wavelet packet analysis in drill wear monitoring. Machining Science and Technology, vol. 11, no. 3, p. 413-432. (Pubitemid 47537315)
15. Yen, G.G., Lin, K.C. (2000). Wavelet packet feature extraction for vibration monitoring. IEEE Transactions on Industrial Electronics, vol. 47, no. 3, p. 650-667, DOI:10.1109/41.847906.
16. Choudhury I.A., El-Baradie, M.A. (1998). Machining nickel base superalloys: Inconel 718. Journal of Engineering Manufacture, vol. 212, no. B3, p. 195-206, DOI:10.1243/0954405981515617. (Pubitemid 128735632)
17. Fang, N., Wu, Q. (2009). A comparative study of the cutting forces in high speed machining of Ti-6AL-4V and Inconel 718 with a round edge tool. Journal of Materials Processing Technology, vol. 209, no. 9, p. 4385-438, DOI:10.1016/j.jmatprotec.2008.10.013.
18. Ezugwu, E.O., Fadare, D.A., Bonney, J., Da Silva, R.B., Sales, W.F. (2005). Modelling the correlation between cutting and process parameters in high-speed machining of Inconel 718 alloy using an artificial neural network. International Journal of Machine Tools and Manufacture, vol. 45, no. 12-13, p. 1375-1385, DOI:10.1016/j.ijmachtools.2005.02.004. (Pubitemid 40821886)
19. Fang, N. (2003). Slip-line modeling of machining with a rounded-edge tool, part I: new model and theory. Journal of the Mechanics and Physics of Solids, vol. 51, no. 4, p. 715-742, DOI:10.1016/S0022-5096(02)00060-1.
20. Xue, C.W., Chen, H.L.A. (2007). A research of tool wear recognizing based on wavelet packet pretreated and neural network. Journal of System Design and Dynamics, vol. 1, no. 4, p. 760-770, DOI:10.1299/ jsdd.1.760.
21. Alonso, F.J., Salgado, D.R. (2008). Analysis of the structure of vibration signals for tool wear detection. Mechanical Systems and Signal Processing, vol. 22, no. 3, p. 735-748, DOI:10.1016/j.ymssp.2007.09.012.
22. Orhan, S., Er, A.O., Camuscu, N., Aslan, E. (2007). Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness. NDT & E International, vol. 40, no. 2, p. 121-126, DOI:10.1016/j.ndteint.2006.09.006. (Pubitemid 44856278)
23. Schmitz, T., Davies, M., Medicus, K., Snyder, J. (2001). Improving high-speed machining material removal rates by rapid dynamic analysis. CIRP Annals, vol. 50, no. 1, p. 263-268, DOI:10.1016/S0007-8506(07)62119-2. (Pubitemid 32610822)
24. Coifman, R.R., Wickerhauser, M.V. (1992). Entropybased algorithms for best basis selection. IEEE Transactions Information Theory, vol. 38, p. 713-718, DOI:10.1109/18.119732.
25. Mallat, S. (1989). A theory of multiresolution signal decomposition: the wavelet representation. IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 11, no. 7, p. 674-693, DOI:10.1109/34.192463.
26. Rehorn, A.G., Jiang, J., Orban, P.E. (2005). Stateof-the-art methods and results in tool condition monitoring: a review. International Journal of Advanced Manufacturing Technology, vol. 26, no. 7-8, p. 693-710, DOI:10.1007/s00170-004-2443-6. (Pubitemid 41442596)
27. Sick, B. (2002). On-line and indirect tool wear monitoring in turning with artificial neural networks: A review of more than a decade of research. Mechanical Systems and Signal Processing, vol. 16, no. 4, p. 487-546, DOI:10.1006/mssp.2001.1460.
28. Liu, K., Li, X.P., Rahman, M., Neo, K.S., Liu, X.D. (2007). A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers. International Journal of Advanced Manufacturing Technology, vol. 32, no. 7-8, p. 631-637, DOI:10.1007/s00170-005-0364-7. (Pubitemid 46433400)
29. Pušavec, F., Govekar, E., Kopac, J., Jawahir, I.S. (2011). The influence of cryogenic cooling on process stability in turning operations. CIRP Annals -Manufacturing Technology, vol. 60, p. 101-104.