A review on machinery diagnostics and prognostics implementing condition-based maintenance

Mechanical Systems and Signal Processing

Volumn 20, Issue 7, 2006, Pages 1483-1510

  Jardine, Andrew K S ^a   Lin, Daming ^a   Banjevic, Dragan ^a  

^a UNIVERSITY OF TORONTO   (Canada)

Author keywords

Condition monitoring; Condition based maintenance; Diagnostics; Prognostics; Sensor data fusion; Signal processing

Indexed keywords

CONDITION MONITORING; DATA ACQUISITION; DATA PROCESSING; DECISION MAKING; INSTALLATION; PROGRAM DIAGNOSTICS; RESEARCH AND DEVELOPMENT MANAGEMENT; SENSOR DATA FUSION;

CONDITION-BASED MAINTENANCE; DIAGNOSTICS; PROGNOSTICS;

MACHINERY EXHIBITIONS;

EID: 33646534620     PISSN: 08883270     EISSN: 10961216     Source Type: Journal    
DOI: 10.1016/j.ymssp.2005.09.012     Document Type: Review

References (271)

1. Martin K.F. A review by discussion of condition monitoring and fault-diagnosis in machine-tools. International Journal of Machine Tools and Manufacture 34 (1994) 527-551
2. J. Lee, R. Abujamra, A.K.S. Jardine, D. Lin, D. Banjevic, An integrated platform for diagnostics, prognostics and maintenance optimization, in: The IMS '2004 International Conference on Advances in Maintenance and in Modeling, Simulation and Intelligent Monitoring of Degradations, Arles, France, 2004.
3. S. Nandi, H.A. Toliyat, Condition monitoring and fault diagnostic of electrical machines-A review, in: Thirty-Fourth IAS Annual Meeting, vol. 1, Phoenix, AZ, USA, 1999, pp. 197-204.
4. Pusey H.C., and Roemer M.J. Assessment of turbomachinery condition monitoring and failure prognosis technology. The Shock and Vibration Digest 31 (1999) 365-371
5. Wang W.Q., Ismail F., and Farid Golnaraghi M. Assessment of gear damage monitoring techniques using vibration measurements. Mechanical Systems and Signal Processing 15 (2001) 905-922
6. Wang M., Vandermaar A.J., and Srivastava K.D. Review of condition assessment of power transformers in service. IEEE Electrical Insulation Magazine 18 (2002) 12-25
7. A. El-Shafei, N. Rieger, Automated diagnostics of rotating machinery, in: 2003 ASME Turbo Expo, vol. 4, Atlanta, GA, USA, 2003, pp. 491-498.
8. Saha T.K. Review of modern diagnostic techniques for assessing insulation condition in aged transformers. IEEE Transactions on Dielectrics and Electrical Insulation 10 (2003) 903-917
9. R.M. Tallam, S.B. Lee, G. Stone, G.B. Kliman, J. Yoo, T.G. Habetler, R.G. Harley, A survey of methods for detection of stator related faults in induction machines, in: Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, New York, 2003, pp. 35-46.
10. Sabnavis G., Kirk R.G., Kasarda M., and Quinn D. Cracked shaft detection and diagnostics: A literature review. The Shock and Vibration Digest 36 (2004) 287-296
11. Austerlitz H. Data Acquisition Techniques using PCs (2003), Academic Press, San Diego, CA
12. Kirianaki N.V., Yurish S.Y., Shpak N.O., and Deynega V.P. Data Acquisition and Signal Processing for Smart Sensors (2002), Wiley, Chichester, West Sussex, England
13. C. Davies, R.M. Greenough, The use of information systems in fault diagnosis, in: Proceedings of the 16th National Conference on Manufacturing Research, University of East London, UK, 2000.
14. Xu R., and Kwan C. Robust isolation of sensor failures. Asian Journal of Control 5 (2003) 12-23
15. Russ J.C. The Image Processing Handbook (2002), CRC Press, Boca Raton, FL
16. Nixon M.S., and Aguado A.S. Feature Extraction and Image Processing (2002), Newnes, Oxford
17. Wang W.J., and McFadden P.D. Early detection of gear failure by vibration analysis II. Interpretation of the time-frequency distribution using image processing techniques. Mechanical Systems and Signal Processing 7 (1993) 205-215
18. Utsumi S., Kawasaki Z., Matsu-Ura K., and Kawada M. Use of wavelet transform and fuzzy system theory to distinguish wear particles in lubricating oil for bearing diagnosis. Electrical Engineering in Japan 134 (2001) 36-44
19. Heger T., and Pandit M. Optical wear assessment system for grinding tools. Journal of Electronic Imaging 13 (2004) 450-461
20. Ellwein C., Danaher S., and Jager U. Identifying regions of interest in spectra for classification purposes. Mechanical Systems and Signal Processing 16 (2002) 211-222
21. Dalpiaz G., Rivola A., and Rubini R. Effectiveness and sensitivity of vibration processing techniques for local fault detection in gears. Mechanical Systems and Signal Processing 14 (2000) 387-412
22. A.J. Miller, A new wavelet basis for the decomposition of gear motion error signals and its application to gearbox diagnostics, M.Sc. Thesis, Graduate Program in Acoustics, The Pennsylvania State University, State College, PA, 1999.
23. S. Poyhonen, P. Jover, H. Hyotyniemi, Signal processing of vibrations for condition monitoring of an induction motor, in: ISCCSP: 2004 First International Symposium on Control, Communications and Signal Processing, New York, 2004, pp. 499-502.
24. Baillie D.C., and Mathew J. A comparison of autoregressive modeling techniques for fault diagnosis of rolling element bearings. Mechanical Systems and Signal Processing 10 (1996) 1-17
25. A.K. Garga, B.T. Elverson, D.C. Lang, AR modeling with dimension reduction for machinery fault classification, in: Critical Link: Diagnosis to Prognosis, Haymarket, 1997, pp. 299-308.
26. Zhan Y., Makis V., and Jardine A.K.S. Adaptive model for vibration monitoring of rotating machinery subject to random deterioration. Journal of Quality in Maintenance Engineering 9 (2003) 351-375
27. Wang W.J., Chen J., Wu X.K., and Wu Z.T. The application of some non-linear methods in rotating machinery fault diagnosis. Mechanical Systems and Signal Processing 15 (2001) 697-705
28. Wang W.J., and Lin R.M. The application of pseudo-phase portrait in machine condition monitoring. Journal of Sound and Vibration 259 (2003) 1-16
29. Koizumi T., Tsujiuchi N., and Matsumura Y. Diagnosis with the correlation integral in time domain. Mechanical Systems and Signal Processing 14 (2000) 1003-1010
30. Wang W.J., Wu Z.T., and Chen J. Fault identification in rotating machinery using the correlation dimension and bispectra. Nonlinear Dynamics 25 (2001) 383-393
31. Zhuge Q., and Lu Y. Signature analysis for reciprocating machinery with adaptive signal-processing. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science 205 (1991) 305-310
32. Baydar N., Chen Q., Ball A., and Kruger U. Detection of incipient tooth defect in helical gears using multivariate statistics. Mechanical Systems and Signal Processing 15 (2001) 303-321
33. Schoen R.R., and Habetler T.G. Effects of time-varying loads on rotor fault detection in induction machines. IEEE Transactions on Industry Applications 31 (1995) 900-906
34. De Almeida R.G.T., Da Silva Vicente S.A., and Padovese L.R. New technique for evaluation of global vibration levels in rolling bearings. Shock and Vibration 9 (2002) 225-234
35. Liu Z., Yin X., Zhang Z., Chen D., and Chen W. Online rotor mixed fault diagnosis way based on spectrum analysis of instantaneous power in squirrel cage induction motors. IEEE Transactions on Energy Conversion 19 (2004) 485-490
36. Ho D., and Randall R.B. Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals. Mechanical Systems and Signal Processing 14 (2000) 763-788
37. Randall R.B., Antoni J., and Chobsaard S. The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals. Mechanical Systems and Signal Processing 15 (2001) 945-962
38. Stack J.R., Harley R.G., and Habetler T.G. An amplitude modulation detector for fault diagnosis in rolling element bearings. IEEE Transactions on Industrial Electronics 51 (2004) 1097-1102
39. Blankenship G.W., and Singh R. Analytical solution for modulation sidebands associated with a class of mechanical oscillators. Journal of Sound and Vibration 179 (1995) 13-36
40. M.A. Minnicino, H.J. Sommer, Detecting and quantifying friction nonlinearity using the Hilbert transform, in: Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological System III, vol. 5394, Bellingham, 2004, pp. 419-427.
41. Goldman S. Vibration Spectrum Analysis: A Practical Approach (1999), Industrial Press, New York
42. Harris C.M., and Piersol A.G. Harris' Shock and Vibration Handbook (2002), McGraw-Hill, New York
43. N.T. van der Merwe, A.J. Hoffman, A modified cepstrum analysis applied to vibrational signals, in: Proceedings of 14th International Conference on Digital Signal Processing (DSP2002), vol. 2, Santorini, Greece, 2002, pp. 873-876.
44. Wang C.-C., and Too G.-P.J. Rotating machine fault detection based on HOS and artificial neural networks. Journal of Intelligent Manufacturing 13 (2002) 283-293
45. Xiong L., Shi T., Yang S., and Rao R.B.K.N. A novel application of wavelet-based bispectrum analysis to diagnose faults in gears. International Journal of COMADEM 5 (2002) 31-38
46. Yang D.-M., Stronach A.F., Macconnell P., and Penman J. Third-order spectral techniques for the diagnosis of motor bearing condition using artificial neural networks. Mechanical Systems and Signal Processing 16 (2002) 391-411
47. Parker B.E., Ware H.A., Wipf D.P., Tompkins W.R., Clark B.R., Larson E.C., and Poor H.V. Fault diagnostics using statistical change detection in the bispectral domain. Mechanical Systems and Signal Processing 14 (2000) 561-570
48. Chow T.W.S., and Fei G. Three phase induction machines asymmetrical faults identification using bispectrum. IEEE Transactions on Energy Conversion 10 (1995) 688-693
49. N. Arthur, J. Penman, Inverter fed induction machine condition monitoring using the bispectrum, in: Proceedings of the IEEE Signal Processing Workshop on Higher-Order Statistics, Banff, Alta., Canada, 1997, pp. 67-71.
50. Li W., Zhang G., Shi T., and Yang S. Gear crack early diagnosis using bispectrum diagonal slice. Chinese Journal of Mechanical Engineering 16 (2003) 193-196 (English Edition)
51. McCormick A.C., and Nandi A.K. Bispectral and trispectral features for machine condition diagnosis. IEE Proceedings-Vision, Image and Signal Processing 146 (1999) 229-234
52. Qu L., Liu X., Peyronne G., and Chen Y. The holospectrum: A new method for rotor surveillance and diagnosis. Mechanical Systems and Signal Processing 3 (1989) 255-267
53. C.B. Yu, H.B. He, Y. Xu, F.L. Chen, Identification method of acoustic information flow of bearing state, in: Condition Monitoring '97, 1997, pp. 311-315.
54. Chen Y.D., and Du R. Diagnosing spindle defects using 4-D holospectrum. Journal of Vibration and Control 4 (1998) 717-732
55. Qu L., and Shi D. Holospectrum during the past decade: Review & prospect. Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement & Diagnosis 18 (1998) 235-242 (in Chinese)
56. Hayes M.H. Statistical Digital Signal Processing and Modeling (1996), Wiley, New York
57. Mechefske C.K., and Mathew J. Fault detection and diagnosis in low speed rolling element bearing. Part I: The use of parametric spectra. Mechanical Systems and Signal Processing 6 (1992) 297-307
58. Dron J.P., Rasolofondraibe L., Couet C., and Pavan A. Fault detection and monitoring of a ball bearing benchtest and a production machine via autoregressive spectrum analysis. Journal of Sound and Vibration 218 (1998) 501-525
59. Stack J.R., Habetler T.G., and Harley R.G. Bearing fault detection via autoregressive stator current modeling. IEEE Transactions on Industry Applications 40 (2004) 740-747
60. M.J.E. Salami, A. Gani, T. Pervez, Machine condition monitoring and fault diagnosis using spectral analysis techniques, in: Proceedings of the First International Conference on Mechatronics (ICOM '01), vol. 2, Kuala Lumpur, Malaysia, 2001, pp. 690-700.
61. Wang W.J., and McFadden P.D. Early detection of gear failure by vibration analysis I. Calculation of the time-frequency distribution. Mechanical Systems and Signal Processing 7 (1993) 193-203
62. F.A. Andrade, I. Esat, M.N.M. Badi, Gearbox fault detection using statistical methods, time-frequency methods (STFT and Wigner-Ville distribution) and harmonic wavelet-A comparative study, in: Proceedings of the COMADEM '99, Chipping Norton, 1999, pp. 77-85.
63. Meng Q., and Qu L. Rotating machinery fault diagnosis using Wigner distribution. Mechanical Systems and Signal Processing 5 (1991) 155-166
64. Pan M.-C., Van Brussel H., Sas P., and Verbeure B. Fault diagnosis of joint backlash. Journal of Vibration and Acoustics, Transactions of the ASME 120 (1998) 13-24
65. Koo I.S., and Kim W.W. The development of reactor coolant pump vibration monitoring and a diagnostic system in the nuclear power plant. ISA Transactions 39 (2000) 309-316
66. Baydar N., and Ball A. A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. Mechanical Systems and Signal Processing 15 (2001) 1091-1107
67. Cohen L. Time-frequency distribution-A review. Proceedings of the IEEE 77 (1989) 941-981
68. Bonato P., Ceravolo R., De Stefano A., and Knaflitz M. Bilinear time-frequency transformations in the analysis of damaged structures. Mechanical Systems and Signal Processing 11 (1997) 509-527
69. Gu S., Ni J., and Yuan J. Non-stationary signal analysis and transient machining process condition monitoring. International Journal of Machine Tools and Manufacture 42 (2002) 41-51
70. Loughlin P., Cakrak F., and Cohen L. Conditional moments analysis of transients with application to helicopter fault data. Mechanical Systems and Signal Processing 14 (2000) 511-522
71. Young R.K. Wavelets Theory and Its Applications (1993), Kluwer Academic Publishers, Boston
72. Staszewski W.J., and Tomlinson G.R. Application of the wavelet transform to fault detection in a spur gear. Mechanical Systems and Signal Processing 8 (1994) 289-307
73. Wang W.J., and McFadden P.D. Application of wavelets to gearbox vibration signals for fault detection. Journal of Sound and Vibration 192 (1996) 927-939
74. Rubini R., and Meneghetti U. Application of the envelope and wavelet transform analyses for the diagnosis of incipient faults in ball bearings. Mechanical Systems and Signal Processing 15 (2001) 287-302
75. Luo G.Y., Osypiw D., and Irle M. On-line vibration analysis with fast continuous wavelet algorithm for condition monitoring of bearing. Journal of Vibration and Control 9 (2003) 931-947
76. Aretakis N., and Mathioudakis K. Wavelet analysis for gas turbine fault diagnostics. Journal of Engineering for Gas Turbines and Power 119 (1997) 870-876
77. G.O. Chandroth, W.J. Staszewski, Fault detection in internal combustion engines using wavelet analysis, in: Proceedings of the COMADEM '99, Chipping Norton, 1999, pp. 7-15.
78. Dalpiaz G., and Rivola A. Condition monitoring and diagnostics in automatic machines: Comparison of vibration analysis techniques. Mechanical Systems and Signal Processing 11 (1997) 53-73
79. Baydar N., and Ball A. Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing 17 (2003) 787-804
80. Addison P.S., Watson J.N., and Feng T. Low-oscillation complex wavelets. Journal of Sound and Vibration 254 (2002) 733-762
81. Xu Y.-G., and Yan Y.-L. Research on Haar spectrum in fault diagnosis of rotating machinery. Applied Mathematics and Mechanics 12 (1991) 61-66 (English Edition)
82. Tonshoff H.K., Li X., and Lapp C. Application of fast Haar transform and concurrent learning to tool-breakage detection in milling. IEEE/ASME Transactions on Mechatronics 8 (2003) 414-417
83. A.J. Miller, K.M. Reichard, A new wavelet basis for automated fault diagnostics of gear teeth, in: Inter-Noise 99: Proceedings of the 1999 International Congress on Noise Control Engineering, vols. 1-3, Poughkeepsie, 1999, pp. 1597-1602.
84. Boulahbal D., Golnaraghi F., and Ismail F. Amplitude and phase wavelet maps for the detection of cracks in geared systems. Mechanical System and Signal Processing 13 (1999) 423-436
85. Meltzer G., and Dien N.P. Fault diagnosis in gears operating under non-stationary rotational speed using polar wavelet amplitude maps. Mechanical Systems and Signal Processing 18 (2004) 985-992
86. Wang C., and Gao R.X. Wavelet transform with spectral post-processing for enhanced feature extraction. IEEE Transactions on Instrumentation and Measurement 52 (2003) 1296-1301
87. Yen G.G., and Lin K.-C. Wavelet packet feature extraction for vibration monitoring. IEEE Transactions on Industrial Electronics 47 (2000) 650-667
88. Zhang S., Mathew J., Ma L., and Sun Y. Best basis-based intelligent machine fault diagnosis. Mechanical Systems and Signal Processing 19 (2005) 357-370
89. Toliyat H.A., Abbaszadeh K., Rahimian M.M., and Olson L.E. Rail defect diagnosis using wavelet packet decomposition. IEEE Transactions on Industry Applications 39 (2003) 1454-1461
90. Yang H., Mathew J., and Ma L. Fault diagnosis of rolling element bearings using basis pursuit. Mechanical Systems and Signal Processing 19 (2005) 341-356
91. Lin J., Zuo M.J., and Fyfe K.R. Mechanical fault detection based on the wavelet de-noising technique. Journal of Vibration and Acoustics 126 (2004) 9-16
92. Peng Z.K., and Chu F.L. Application of the wavelet transform in machine condition monitoring and fault diagnostics: A review with bibliography. Mechanical Systems and Signal Processing 18 (2004) 199-221
93. Stellman C.M., Ewing K.J., Bucholtz F., and Aggarwal I.D. Monitoring the degradation of a synthetic lubricant oil using infrared absorption, fluorescence emission and multivariate analysis: A feasibility study. Lubrication Engineering 55 (1999) 42-52
94. G.O. Allgood, B.R. Upadhyaya, A model-based high-frequency matched filter arcing diagnostic system based on principal component analysis (PCA) clustering, in: Applications and Science of Computational Intelligence III, vol. 4055, Bellingham, 2000, pp. 430-440.
95. I.K. Fodor, A Survey of Dimension Reduction Techniques, Lawrence Livermore National Laboratory (LLNL) Technical Report, UCRL-ID-148494, University of California, Livermore, CA, 2002.
96. Grimmelius H.T., Woud J.K., and Been G. On-line failure diagnosis for compression refrigeration plants. International Journal of Refrigeration 18 (1995) 31-41
97. L. Yang, M.Z. Yang, Z. Yan, B.Z. Shi, Extraction of symptom for on-line diagnosis of power equipment based on method of time series analysis, in: Proceedings of the Sixth International Conference on Properties and Applications of Dielectric Materials, vol. 1, Xi'an, China, 2000, pp. 314-317.
98. Sinha B.K. Trend prediction from steam turbine responses of vibration and eccentricity. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy 216 (2002) 97-104
99. Jardine A.K.S., Anderson P.M., and Mann D.S. Application of the Weibull proportional hazard model to aircraft and marine engine failure data. Quality and Reliability Engineering International 3 (1987) 77-82
100. Vlok P.-J., Wnek M., and Zygmunt M. Utilising statistical residual life estimates of bearings to quantify the influence of preventive maintenance actions. Mechanical Systems and Signal Processing 18 (2004) 833-847
101. Moubray J. Reliability-Centred Maintenance (1997), Butterworth-Heinemann, Oxford
102. Goode K.B., Moore J., and Roylance B.J. Plant machinery working life prediction method utilizing reliability and condition-monitoring data. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering 214 (2000) 109-122
103. Rabiner L.R. Tutorial on hidden Markov models and selected applications in speech recognition. Proceedings of the IEEE 77 (1989) 257-286
104. Elliott R.J., Aggoun L., and Moore J.B. Hidden Markov Models: Estimation and Control (1995), Springer, New York
105. Bunks C., McCarthy D., and Al-Ani T. Condition-based maintenance of machines using hidden Markov models. Mechanical Systems and Signal Processing 14 (2000) 597-612
106. M. Dong, D. He, Hidden semi-Markov models for machinery health diagnosis and prognosis, in: Papers Presented at NAMRC 32, vol. 32, Charlotte, NC, USA, 2004, pp. 199-206.
107. Lin D., and Makis V. Recursive filters for a partially observable system subject to random failure. Advances in Applied Probability 35 (2003) 207-227
108. Lin D., and Makis V. On-line parameter estimation for a failure-prone system subject to condition monitoring. Journal of Applied Probability 41 (2004) 211-220
109. Wang W. A model to predict the residual life of rolling element bearings given monitored condition information to date. IMA Journal of Management Mathematics 13 (2002) 3-16
110. Wang W., Scarf P.A., and Smith M.A.J. On the application of a model of condition-based maintenance. Journal of the Operational Research Society 51 (2000) 1218-1227
111. A.K.S. Jardine, Optimizing condition based maintenance decisions, in: Proceedings of the Annual Reliability and Maintainability Symposium, 2002, pp. 90-97.
112. Wang W., and Sharp J. Modelling condition-based maintenance decision support. Condition Monitoring: Engineering the Practice (2002), Bury St Edmunds 79-98
113. Williams J.H., Davies A., and Drake P.R. Condition-Based Maintenance and Machine Diagnostics (1994), Chapman & Hall, London
114. Korbicz J., Koscielny J.M., Kowalczuk Z., and Cholewa W. Fault Diagnosis: Models, Artificial Intelligence, Applications (2004), Springer, Berlin
115. Ma J., and Li C.J. Detection of localized defects in rolling element bearings via composite hypothesis test. Mechanical Systems and Signal Processing 9 (1995) 63-75
116. Kim Y.W., Rizzoni G., and Utkin V.I. Developing a fault tolerant power-train control system by integrating design of control and diagnostics. International Journal of Robust and Nonlinear Control 11 (2001) 1095-1114
117. Sohn H., Worden K., and Farrar C.R. Statistical damage classification under changing environmental and operational conditions. Journal of Intelligent Material Systems and Structures 13 (2002) 561-574
118. M. Nyberg, A general framework for fault diagnosis based on statistical hypothesis testing, in: Twelfth International Workshop on Principles of Diagnosis (DX 2001), Via Lattea, Italian Alps, 2001, pp. 135-142.
119. Fugate M.L., Sohn H., and Farrar C.R. Vibration-based damage detection using statistical process control. Mechanical Systems and Signal Processing 15 (2001) 707-721
120. V.A. Skormin, L.J. Popyack, V.I. Gorodetski, M.L. Araiza, J.D. Michel, Applications of cluster analysis in diagnostics-related problems, in: Proceedings of the 1999 IEEE Aerospace Conference, vol. 3, Snowmass at Aspen, CO, USA, 1999, pp. 161-168.
121. M. Artes, L. Del Castillo, J. Perez, Failure prevention and diagnosis in machine elements using cluster, in: Proceedings of the Tenth International Congress on Sound and Vibration, Stockholm, Sweden, 2003, pp. 1197-1203.
122. Schurmann J. Pattern Recognition: A Unified View of Statistical and Neural Approaches (1996), Wiley, New York
123. Ding H., Gui X., and Yang S. An approach to state recognition and knowledge-based diagnosis for engines. Mechanical Systems and Signal Processing 5 (1991) 257-266
124. Staszewski W.J., Worden K., and Tomlinson G.R. Time-frequency analysis in gearbox fault detection using the Wigner-Ville distribution and pattern recognition. Mechanical Systems and Signal Processing 11 (1997) 673-692
125. Goumas S.K., Zervakis M.E., and Stavrakakis G.S. Classification of washing machines vibration signals using discrete wavelet analysis for feature extraction. IEEE Transactions on Instrumentation and Measurement 51 (2002) 497-508
126. Lou X., and Loparo K.A. Bearing fault diagnosis based on wavelet transform and fuzzy inference. Mechanical Systems and Signal Processing 18 (2004) 1077-1095
127. Pan M.-C., Sas P., and Van Brussel H. Machine condition monitoring using signal classification techniques. Journal of Vibration and Control 9 (2003) 1103-1120
128. Webb A.R. Statistical Pattern Recognition (2002), Wiley, West Sussex, England
129. Mechefske C.K., and Mathew J. Fault detection and diagnosis in low speed rolling element bearing. Part II: The use of nearest neighbour classification. Mechanical Systems and Signal Processing 6 (1992) 309-316
130. Sun Q., Chen P., Zhang D., and Xi F. Pattern recognition for automatic machinery fault diagnosis. Journal of Vibration and Acoustics, Transactions of the ASME 126 (2004) 307-316
131. M. Guo, L. Xie, S.-Q. Wang, J.-M. Zhang, Research on an integrated ICA-SVM based framework for fault diagnosis, in: Proceedings of the 2003 IEEE International Conference on Systems, Man and Cybernetics, vol. 3, Washington, DC, USA, 2003, pp. 2710-2715.
132. Ying J., Kirubarajan T., Pattipati K.R., and Patterson-Hine A. A hidden Markov model-based algorithm for fault diagnosis with partial and imperfect tests. IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) 30 (2000) 463-473
133. Ge M., Du R., and Xu Y. Hidden Markov model based fault diagnosis for stamping processes. Mechanical Systems and Signal Processing 18 (2004) 391-408
134. Li Z., Wu Z., He Y., and Fulei C. Hidden Markov model-based fault diagnostics method in speed-up and speed-down process for rotating machinery. Mechanical Systems and Signal Processing 19 (2005) 329-339
135. Xu Y., and Ge M. Hidden Markov model-based process monitoring system. Journal of Intelligent Manufacturing 15 (2004) 337-350
136. D. Ye, Q. Ding, Z. Wu, New method for faults diagnosis of rotating machinery based on 2-dimension hidden Markov model, in: Proceedings of the International Symposium on Precision Mechanical Measurement, vol. 4, Hefei, China, 2002, pp. 391-395.
137. A. Siddique, G.S. Yadava, B. Singh, Applications of artificial intelligence techniques for induction machine stator fault diagnostics: Review, in: Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, New York, 2003, pp. 29-34.
138. Roemer M.J., Hong C., and Hesler S.H. Machine health monitoring and life management using finite element-based neural networks. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME 118 (1996) 830-835
139. E.C. Larson, D.P. Wipf, B.E. Parker, Gear and bearing diagnostics using neural network-based amplitude and phase demodulation, in: Proceedings of the 51st Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, 1997, pp. 511-521.
140. Li B., Chow M.-Y., Tipsuwan Y., and Hung J.C. Neural-network-based motor rolling bearing fault diagnosis. IEEE Transactions on Industrial Electronics 47 (2000) 1060-1069
141. Fan Y., and Li C.J. Diagnostic rule extraction from trained feedforward neural networks. Mechanical Systems and Signal Processing 16 (2002) 1073-1081
142. Paya B.A., Esat I.I., and Badi M.N.M. Artificial neural network based fault diagnostics of rotating machinery using wavelet transforms as a preprocessor. Mechanical Systems and Signal Processing 11 (1997) 751-765
143. Samanta B., and Al-Balushi K.R. Artificial neural network based fault diagnostics of rolling element bearings using time-domain features. Mechanical Systems and Signal Processing 17 (2003) 317-328
144. Spoerre J.K. Application of the cascade correlation algorithm (CCA) to bearing fault classification problems. Computers in Industry 32 (1997) 295-304
145. D.W. Dong, J.J. Hopfield, K.P. Unnikrishnan, Neural networks for engine fault diagnostics, in: Neural Networks for Signal Processing VII, New York, 1997, pp. 636-644.
146. Li C.J., and Huang T.-Y. Automatic structure and parameter training methods for modeling of mechanical systems by recurrent neural networks. Applied Mathematical Modelling 23 (1999) 933-944
147. Deuszkiewicz P., and Radkowski S. On-line condition monitoring of a power transmission unit of a rail vehicle. Mechanical Systems and Signal Processing 17 (2003) 1321-1334
148. Tallam R.M., Habetler T.G., and Harley R.G. Self-commissioning training algorithms for neural networks with applications to electric machine fault diagnostics. IEEE Transactions on Power Electronics 17 (2002) 1089-1095
149. Y.H. Yoon, E.S. Yoon, K.S. Chang, Process fault diagnostics using the integrated graph model, in: On-Line Fault Detection and Supervision in the Chemical Process Industries, Oxford, 1993, pp. 89-94.
150. Hansen C.H., Autar R.K., and Pickles J.M. Expert systems for machine fault diagnosis. Acoustics Australia 22 (1994) 85-90
151. Baig M.F., and Sayeed N. Model-based reasoning for fault diagnosis of twin-spool turbofans. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 212 (1998) 109-116
152. Z.Y. Wen, J. Crossman, J. Cardillo, Y.L. Murphey, Case base reasoning in vehicle fault diagnostics, in: Proceedings of the International Joint Conference on Neural Networks 2003, vols. 1-4, New York, 2003, pp. 2679-2684.
153. M. Bengtsson, E. Olsson, P. Funk, M. Jackson, Technical design of condition based maintenance system-A case study using sound analysis and case-based reasoning, in: Maintenance and Reliability Conference-Proceedings of the Eighth Congress, Knoxville, USA, 2004.
154. M.L. Araiza, R. Kent, R. Espinosa, Real-time, embedded diagnostics and prognostics in advanced artillery systems, in: 2002 IEEE Autotestcon Proceedings, Systems Readiness Technology Conference, New York, 2002, pp. 818-841.
155. Hall D.L., Hansen R.J., and Lang D.C. The negative information problem in mechanical diagnostics. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME 119 (1997) 370-377
156. Stanek M., Morari M., and Frohlich K. Model-aided diagnosis: An inexpensive combination of model-based and case-based condition assessment. IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews 31 (2001) 137-145
157. Silva R.G., Reuben R.L., Baker K.J., and Wilcox S.J. Tool wear monitoring of turning operations by neural network and expert system classification of a feature set generated from multiple sensors. Mechanical Systems and Signal Processing 12 (1998) 319-332
158. DePold H.R., and Gass F.D. The application of expert systems and neural networks to gas turbine prognostics and diagnostics. Journal of Engineering for Gas Turbines and Power 121 (1999) 607-612
159. Yang B.-S., Han T., and Kim Y.-S. Integration of ART-Kohonen neural network and case-based reasoning for intelligent fault diagnosis. Expert Systems with Applications 26 (2004) 387-395
160. Mechefske C.K. Objective machinery fault diagnosis using fuzzy logic. Mechanical Systems and Signal Processing 12 (1998) 855-862
161. G.C. Collins, J.R. Bourne, A.J. Brodersen, C.F. Lo, Comparison of rule-based and belief-based systems for diagnostic problems, in: Proceedings of the Second International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems (IEA/AIE-89), vol. 2, New York, USA, 1989, pp. 785-793.
162. Du R., and Yeung K. Fuzzy transition probability: A new method for monitoring progressive faults. Part 1: The theory. Engineering Applications of Artificial Intelligence 17 (2004) 457-467
163. Zhang S., Asakura T., Xu X.L., and Xu B.J. Fault diagnosis system for rotary machine based on fuzzy neural networks. JSME International Journal. Series C: Mechanical Systems, Machine Elements and Manufacturing 46 (2003) 1035-1041
164. Liu T.I., Singonahalli J.H., and Iyer N.R. Detection of roller bearing defects using expert system and fuzzy logic. Mechanical Systems and Signal Processing 10 (1996) 595-614
165. Chang S.H., Kang K.S., Choi S.S., Kim H.G., Jeong H.K., and Yi C.U. Development of the on-line operator aid system OASYS using a rule-based expert system and fuzzy logic for nuclear power plants. Nuclear Technology 112 (1995) 266-294
166. A.K. Garga, K.T. McClintic, R.L. Campbell, C.C. Yang, M.S. Lebold, T.A. Hay, C.S. Byington, Hybrid reasoning for prognostic learning in CBM systems, in: 2001 IEEE Aerospace Conference Proceedings, vols. 1-7, New York, 2001, pp. 2957-2969.
167. Fogel D.B. An introduction to simulated evolutionary optimization. IEEE Transactions on Neural Networks 5 (1994) 3-14
168. Sampath S., Ogaji S., Singh R., and Probert D. Engine-fault diagnostics: An optimisation procedure. Applied Energy 73 (2002) 47-70
169. Chen Z.Y., He Y.Y., Chu F.L., and Huang J.Y. Evolutionary strategy for classification problems and its application in fault diagnostics. Engineering Applications of Artificial Intelligence 16 (2003) 31-38
170. Huang Y.-C., and Huang C.-M. Evolving wavelet networks for power transformer condition monitoring. IEEE Transactions on Power Delivery 17 (2002) 412-416
171. G.-T. Yan, G.-F. Ma, Fault diagnosis of diesel engine combustion system based on neural networks, in: Proceedings of the 2004 International Conference on Machine Learning and Cybernetics, vol. 5, Shanghai, China, 2004, pp. 3111-3114.
172. Gertler J.J. Fault Detection and Diagnosis in Engineering Systems (1998), Marcel Dekker, New York
173. Simani S., Fantuzzi C., and Patton R.J. Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques (2003), Springer, London
174. Howard I., Jia S., and Wang J. The dynamic modelling of a spur gear in mesh including friction and a crack. Mechanical Systems and Signal Processing 15 (2001) 831-838
175. W.Y. Wang, Towards dynamic model-based prognostics for transmission gears, in: Component and Systems Diagnostics, Prognostics, and Health Management II, vol. 4733, Bellingham, 2002, pp. 157-167.
176. D.C. Baillie, J. Mathew, Nonlinear model-based fault diagnosis of bearings, in: Proceedings of an International Conference on Condition Monitoring, Swansea, UK, 1994, pp. 241-252.
177. Loparo K.A., Adams M.L., Lin W., Abdel-Magied M.F., and Afshari N. Fault detection and diagnosis of rotating machinery. IEEE Transactions on Industrial Electronics 47 (2000) 1005-1014
178. K.A. Loparo, A.H. Falah, M.L. Adams, Model-based fault detection and diagnosis in rotating machinery, in: Proceedings of the Tenth International Congress on Sound and Vibration, Stockholm, Sweden, 2003, pp. 1299-1306.
179. C.H. Oppenheimer, K.A. Loparo, Physically based diagnosis and prognosis of cracked rotor shafts, in: Component and Systems Diagnostics, Prognostics, and Health Management II, vol. 4733, Bellingham, 2002, pp. 122-132.
180. Sekhar A.S. Model-based identification of two cracks in a rotor system. Mechanical Systems and Signal Processing 18 (2004) 977-983
181. Choi G.H., and Choi G.S. Application of minimum cross entropy to model-based monitoring in diamond turning. Mechanical Systems and Signal Processing 10 (1996) 615-631
182. Bartelmus W. Mathematical modelling and computer simulations as an aid to gearbox diagnostics. Mechanical Systems and Signal Processing 15 (2001) 855-871
183. Bartelmus W. Diagnostic information on gearbox condition for mechatronic systems. Transactions of the Institute of Measurement and Control 25 (2003) 451-465
184. Hansen R.J., Hall D.L., and Kurtz S.K. A new approach to the challenge of machinery prognostics. Journal of Engineering for Gas Turbines and Power 117 (1995) 320-325
185. Vania A., and Pennacchi P. Experimental and theoretical application of fault identification measures of accuracy in rotating machine diagnostics. Mechanical Systems and Signal Processing 18 (2004) 329-352
186. David R., and Alla H. Petri nets for modeling of dynamic systems-A survey. Automatica 30 (1994) 175-202
187. N.C. Propes, A fuzzy Petri net based mode identification algorithm for fault diagnosis of complex systems, in: System Diagnosis and Prognosis: Security and Condition Monitoring Issues III, vol. 5107, Bellingham, 2003, pp. 44-53.
188. Yang S.K. A condition-based failure-prediction and processing-scheme for preventive maintenance. IEEE Transactions on Reliability 52 (2003) 373-383
189. Yang B.-S., Jeong S.K., Oh Y.-M., and Tan A.C.C. Case-based reasoning system with Petri nets for induction motor fault diagnosis. Expert Systems with Applications 27 (2004) 301-311
190. C.R. Farrar, F. Hemez, G. Park, A.N. Robertson, H. Sohn, T.O. Williams, A coupled approach to developing damage prognosis solutions, in: Damage Assessment of Structures-The Fifth International Conference on Damage Assessment of Structures (DAMAS 2003), Southampton, UK, 2003.
191. Yan J., Koc M., and Lee J. A prognostic algorithm for machine performance assessment and its application. Production Planning and Control 15 (2004) 796-801
192. E. Phelps, P. Willett, T. Kirubarajan, A statistical approach to prognostics, in: Component and Systems Diagnostics, Prognosis and Health Management, vol. 4389, Bellingham, 2001, pp. 23-34.
193. D. Banjevic, A.K.S. Jardine, Calculation of reliability function and remaining useful life for a Markov failure time process, IMA Journal of Management Mathematics (2005), to appear, doi:10.1093/imaman/dpi029.
194. R.B. Chinnam, P. Baruah, Autonomous diagnostics and prognostics through competitive learning driven HMM-based clustering, in: Proceedings of the International Joint Conference on Neural Networks 2003, vols. 1-4, New York, 2003, pp. 2466-2471.
195. C. Kwan, X. Zhang, R. Xu, L. Haynes, A novel approach to fault diagnostics and prognostics, in: Proceedings of the 2003 IEEE International Conference on Robotics and Automation, vols. 1-3, New York, 2003, pp. 604-609.
196. Lin D., and Makis V. Filters and parameter estimation for a partially observable system subject to random failure with continuous-range observations. Advances in Applied Probability 36 (2004) 1212-1230
197. Zhang S., and Ganesan R. Multivariable trend analysis using neural networks for intelligent diagnostics of rotating machinery. Transactions of the ASME. Journal of Engineering for Gas Turbines and Power 119 (1997) 378-384
198. Wang P., and Vachtsevanos G. Fault prognostics using dynamic wavelet neural networks. AI EDAM-Artificial Intelligence for Engineering Design Analysis and Manufacturing 15 (2001) 349-365
199. Yam R.C.M., Tse P.W., Li L., and Tu P. Intelligent predictive decision support system for condition-based maintenance. International Journal of Advanced Manufacturing Technology 17 (2001) 383-391
200. Y.-L. Dong, Y.-J. Gu, K. Yang, W.-K. Zhang, A combining condition prediction model and its application in power plant, in: Proceedings of the 2004 International Conference on Machine Learning and Cybernetics, vol. 6, Shanghai, China, 2004, pp. 3474-3478.
201. Wang W.Q., Golnaraghi M.F., and Ismail F. Prognosis of machine health condition using neuro-fuzzy systems. Mechanical Systems and Signal Processing 18 (2004) 813-831
202. Chinnam R.B., and Baruah P. A neuro-fuzzy approach for estimating mean residual life in condition-based maintenance systems. International Journal of Materials and Product Technology 20 (2004) 166-179
203. Ray A., and Tangirala S. Stochastic modeling of fatigue crack dynamics for on-line failure prognostics. IEEE Transactions on Control Systems Technology 4 (1996) 443-451
204. Li Y., Billington S., Zhang C., Kurfess T., Danyluk S., and Liang S. Adaptive prognostics for rolling element bearing condition. Mechanical Systems and Signal Processing 13 (1999) 103-113
205. Li Y., Kurfess T.R., and Liang S.Y. Stochastic prognostics for rolling element bearings. Mechanical Systems and Signal Processing 14 (2000) 747-762
206. Chelidze D., and Cusumano J.P. A dynamical systems approach to failure prognosis. Journal of Vibration and Acoustics 126 (2004) 2-8
207. J. Luo, A. Bixby, K. Pattipati, L. Qiao, M. Kawamoto, S. Chigusa, An interacting multiple model approach to model-based prognostics, in: System Security and Assurance, vol. 1, Washington, DC, USA, 2003, pp. 189-194.
208. Kacprzynski G.J., Sarlashkar A., and Roemer M.J. Predicting remaining life by fusing the physics of failure modeling with diagnostics. Journal of Metal 56 (2004) 29-35
209. Cempel C., Natke H.G., and Tabaszewski M. A passive diagnostic experiment with ergodic properties. Mechanical Systems and Signal Processing 11 (1997) 107-117
210. Qiu J., Zhang C., Seth B.B., and Liang S.Y. Damage mechanics approach for bearing lifetime prognostics. Mechanical Systems and Signal Processing 16 (2002) 817-829
211. G.A. Lesieutre, L. Fang, U. Lee, Hierarchical failure simulation for machinery prognostics, in: Critical Link: Diagnosis to Prognosis, Haymarket, 1997, pp. 103-110.
212. S.J. Engel, B.J. Gilmartin, K. Bongort, A. Hess, Prognostics, the real issues involved with predicting life remaining, in: 2000 IEEE Aerospace Conference Proceedings, vol. 6, New York, 2000, pp. 457-469.
213. Scarf P.A. On the application of mathematical models in maintenance. European Journal of Operational Research 99 (1997) 493-506
214. Lugtigheid D., Banjevic D., and Jardine A.K.S. Modelling repairable system reliability with explanatory variables and repair and maintenance actions. IMA Journal Management Mathematics 15 (2004) 89-110
215. J.E. Campbell, B.M. Thompson, L.P. Swiler, Consequence analysis in predictive health monitoring systems, in: Proceedings of Probabilistic Safety Assessment and Management, vols. I and II, Amsterdam, 2002, pp. 1353-1358.
216. Wang W. A model to determine the optimal critical level and the monitoring intervals in condition-based maintenance. International Journal of Production Research 38 (2000) 1425-1436
217. Grall A., Berenguer C., and Dieulle L. A condition-based maintenance policy for stochastically deteriorating systems. Reliability Engineering and System Safety 76 (2002) 167-180
218. Castanier B., Berenguer C., and Grall A. A sequential condition-based repair/replacement policy with non-periodic inspections for a system subject to continuous wear. Applied Stochastic Models in Business and Industry 19 (2003) 327-347
219. Dieulle L., Berenguer C., Grall A., and Roussignol M. Sequential condition-based maintenance scheduling for a deteriorating system. European Journal of Operational Research 150 (2003) 451-461
220. S.V. Amari, L. McLaughlin, Optimal design of a condition-based maintenance model, in: Proceedings of the Annual Reliability and Maintainability Symposium, Los Angeles, CA, USA, 2004, pp. 528-533.
221. C. Berenguer, A. Grall, B. Castanier, Simulation and evaluation of condition-based maintenance policies for multi-component continuous-state deteriorating systems, in: Foresight and Precaution, vol. 1-2, Rotterdam, 2000, pp. 275-282.
222. Barata J., Soares C.G., Marseguerra M., and Zio E. Simulation modelling of repairable multi-component deteriorating systems for 'on condition' maintenance optimisation. Reliability Engineering and System Safety 76 (2002) 255-264
223. Marseguerra M., Zio E., and Podofillini L. Condition-based maintenance optimization by means of genetic algorithms and Monte Carlo simulation. Reliability Engineering and System Safety 77 (2002) 151-165
224. Hosseini M.M., Kerr R.M., and Randall R.B. An inspection model with minimal and major maintenance for a system with deterioration and Poisson failures. IEEE Transactions on Reliability 49 (2000) 88-98
225. Ohnishi M., Morioka T., and Ibaraki T. Optimal minimal-repair and replacement problem of discrete-time Markovian deterioration system under incomplete state information. Computers and Industrial Engineering 27 (1994) 409-412
226. Hontelez J.A.M., Burger H.H., and Wijnmalen D.J.D. Optimum condition-based maintenance policies for deteriorating systems with partial information. Reliability Engineering and System Safety 51 (1996) 267-274
227. Aven T. Condition based replacement policies-a counting process approach. Reliability Engineering and System Safety 51 (1996) 275-281
228. Barbera F., Schneider H., and Kelle P. A condition based maintenance model with exponential failures and fixed inspection intervals. Journal of the Operational Research Society 47 (1996) 1037-1045
229. Barbera F., Schneider H., and Watson E. A condition based maintenance model for a two-unit series system. European Journal of Operational Research 116 (1999) 281-290
230. Christer A.H., Wang W., and Sharp J.M. A state space condition monitoring model for furnace erosion prediction and replacement. European Journal of Operational Research 101 (1997) 1-14
231. Kumar D., and Westberg U. Maintenance scheduling under age replacement policy using proportional hazards model and TTT-plotting. European Journal of Operational Research 99 (1997) 507-515
232. Makis V., and Jardine A.K.S. Optimal replacement in the proportional hazards model. INFOR 30 (1992) 172-183
233. Banjevic D., Jardine A.K.S., Makis V., and Ennis M. A control-limit policy and software for condition-based maintenance optimization. INFOR 39 (2001) 32-50
234. Makis V., Jiang X., and Jardine A.K.S. A condition-based maintenance model. IMA Journal of Mathematics Applied in Business and Industry 9 (1998) 201-210
235. Makis V., and Jiang X. Optimal replacement under partial observations. Mathematics of Operations Research 28 (2003) 382-394
236. W.B. Wang, A stochastic control model for on line condition based maintenance decision support, in: Sixth World Multiconference on Systematics, Cybernetics and Informatics, vol. VI, Proceedings-Industrial Systems and Engineering I, Orlando, 2002, pp. 370-374.
237. Okumura S., and Okino N. Optimisation of inspection time vector and warning level in CBM considering residual life loss and constraint on preventive replacement probability. International Journal of COMADEM 6 (2003) 10-18
238. A. Barros, A. Grall, C. Berenguer, A maintenance policy optimized with imperfect and/or partial monitoring, in: Proceedings of the Annual Reliability and Maintainability Symposium, New York, 2003, pp. 406-411.
239. Christer A.H., and Wang W. A simple condition monitoring model for a direct monitoring process. European Journal of Operational Research 82 (1995) 258-269
240. Okumura S. An inspection policy for deteriorating processes using delay-time concept. International Transactions in Operational Research 4 (1997) 365-375
241. Goode K.B., Roylance B.J., and Moore J. Development of model to predict condition monitoring interval times. Ironmaking and Steelmaking 27 (2000) 63-68
242. Wang W. Modelling condition monitoring intervals: A hybrid of simulation and analytical approaches. Journal of the Operational Research Society 54 (2003) 273-282
243. Hall D.L., and Llinas J. Handbook of Multisensor Data Fusion (2001), CRC Press, Boca Raton, FL
244. Hall D.L., and McMullen S.A.H. Mathematical Techniques in Multi-Sensor Data Fusion (2004), Artech House, Boston
245. Liu Q., and Wang H.-P. A case study on multisensor data fusion for imbalance diagnosis of rotating machinery. (AI EDAM) Artificial Intelligence for Engineering Design, Analysis and Manufacturing 15 (2001) 203-210
246. Wang H.F., and Wang J.P. Fault diagnosis theory: Method and application based on multisensor data fusion. Journal of Testing and Evaluation 28 (2000) 513-518
247. J.D. Kozlowski, C.S. Byington, A.K. Garga, M.J. Watson, T.A. Hay, Model-based predictive diagnostics for electrochemical energy sources, in: 2001 IEEE Aerospace Conference, vol. 6, Big Sky, MT, 2001, pp. 63149-63164.
248. C.S. Byington, T.A. Merdes, J.D. Kozlowski, Fusion techniques for vibration and oil debris/quality in gearbox failure testing, in: Proceedings of the Condition Monitoring '99, Chipping Norton, 1999, pp. 113-128.
249. Mannan M.A., Kassim A.A., and Jing M. Application of image and sound analysis techniques to monitor the condition of cutting tools. Pattern Recognition Letters 21 (2000) 969-979
250. P. Hannah, A. Starr, P. Bryanston-Cross, Condition monitoring and diagnostic engineering-A data fusion approach, in: Condition Monitoring and Diagnostic Engineering Management, Amsterdam, 2001, pp. 275-282.
251. R. Willetts, A.G. Starr, D. Banjevic, A.K.S. Jardine, A. Doyle, Optimising complex CBM decisions using hybrid fusion methods, in: Condition Monitoring and Diagnostic Engineering Management, Amsterdam, 2001, pp. 909-918.
252. Starr A., Willetts R., Hannah P., Hu W., Banjevic D., and Jardine A.K.S. Data fusion applications in intelligent condition monitoring. In: Mastorakis N., and Mladenov V. (Eds). Recent Advances in Computers, Computing and Communications (2002), WSEAS Press 110-115
253. M.J. Roemer, G.J. Kacprzynski, R.F. Orsagh, Assessment of data and knowledge fusion strategies for prognostics and health management, in: 2001 IEEE Aerospace Conference Proceedings, vol. 6, Big Sky, MT, USA, 2001, pp. 2979-2988.
254. Z.B. Zhang, J. Wang, Y. Tian, H.Q. Zheng, Assessment of information fusion strategies for diagnostics and prognostics, in: Proceedings of the ISTM/2003: Fifth International Symposium on Test and Measurement, vol. 1-6, Beijing, 2003, pp. 1901-1903.
255. Wang J.P., and Wang H.F. The reliability and self-diagnosis of sensors in a multisensor data fusion diagnostic system. Journal of Testing and Evaluation 31 (2003) 370-377
256. Haykin S.S. Unsupervised Adaptive Filtering (2000), Wiley, New York
257. Hyvarinen A. Survey on independent component analysis. Neural Computing Surveys 2 (1999) 94-128
258. L. Li, L. Qu, Machine diagnosis with independent component analysis and envelope analysis, in: International Conference on Industrial Technology: 'Productivity Reincarnation through Robotics and Automation', vol. 2, Bangkok, Thailand, 2002, pp. 1360-1364.
259. J.P. Barnard, C. Aldrich, Diagnostic monitoring of internal combustion engines by use of independent component analysis and neural networks, in: 2003 International Joint Conference on Neural Networks, vol. 2, Portland, OR, USA, 2003, pp. 869-872.
260. Z.S. Chen, Y.M. Yang, G.J. Shen, X.S. Wen, Early diagnosis of helicopter gearboxes based on independent component analysis, in: Proceedings of the ISTM/2003: Fifth International Symposium on Test and Measurement, vols. 1-6, Beijing, 2003, pp. 3383-3386.
261. X.J. Ma, Z.H. Hao, Multisensor data fusion based on independent component analysis for fault diagnosis of rotor, in: Advances in Neural Networks-ISNN 2004, Part 1, vol. 3173, Berlin, 2004, pp. 744-749.
262. X.H. Tian, J. Lin, K.R. Fyfe, M.J. Zuo, Gearbox fault diagnosis using independent component analysis in the frequency domain and wavelet filtering, in: Proceedings of the 2003 IEEE International Conference on Acoustics, Speech, and Signal Processing, vol. II, Speech II; Industry Technology Tracks; Design and Implementation of Signal Processing Systems; Neural Networks for Signal Processing, New York, 2003, pp. 245-248.
263. H.J. Zhang, L.S. Qu, B.G. Xu, G.G. Wen, Partially blind source separation of the diagnostic signals with prior knowledge, in: Condition Monitoring and Diagnostic Engineering Management, Amsterdam, 2001, pp. 177-184.
264. G. Gelle, M. Colas, C. Serviere, BSS for fault detection and machine monitoring-Time or frequency domain approach? in: Proceedings of the International Workshop on Independent Component Analysis and Blind Signal Separation (ICA 2000), Helsinki, Finland, 2000, pp. 555-560.
265. Gelle G., Colas M., and Serviere C. Blind source separation: A new pre-processing tool for rotating machines monitoring?. IEEE Transactions on Instrumentation and Measurement 52 (2003) 790-795
266. P.W. Tse, J. Zhang, The use of blind-source-separation algorithm for mechanical signal separation and machine fault diagnosis, in: 2003 ASME International Mechanical Engineering Congress, vol. 24, Washington, DC, USA, 2003, pp. 57-63.
267. R.M. Vilela, J.C. Metrolho, J.C. Cardoso, Machine and industrial monitorization system by analysis of acoustic signatures, in: Proceedings of the 12th IEEE Mediterranean Electrotechnical Conference (MELECON 2004), vol. 1, Dubrovnik, Croatia, 2004, pp. 277-279.
268. Serviere C., and Fabry P. Blind source separation of noisy harmonic signals for rotating machine diagnosis. Journal of Sound and Vibration 272 (2004) 317-339
269. Collacott R.A. Mechanical Fault Diagnosis and Condition Monitoring (1977), Chapman & Hall, London
270. Allen R.L., and Mills D.W. Signal Analysis: Time, Frequency, Scale and Structure (2004), IEEE Press, Piscataway, NJ
271. Discenzo F.M., Unsworth P.J., Loparo K.A., and Marcy H. Self-diagnosing intelligent motors: A key enabler for next generation manufacturing systems. IEE Colloquium (Digest) (1999) 15-18 (3/1-3/4)