Advances in diagnostic techniques for induction machines

IEEE Transactions on Industrial Electronics

Volumn 55, Issue 12, 2008, Pages 4109-4126

  Bellini, Alberto ^a   Filippetti, Fiorenzo ^b   Tassoni, Carla ^c   Capolino, Gérard André ^d  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

^c UNIVERSITY OF PARMA   (Italy)

^d UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

Author keywords

Adaptive signal processing; Artificial intelligence (AI); Bearings; Diagnostic reasoning; Fault diagnosis; Fourier transforms; Fuzzy neural networks; Induction machines; Induction motor drives; Induction motor protection; Industrial power system maintenance; Pattern recognition; Signal processing; Time frequency analysis; Wavelet transforms

Indexed keywords

AC MOTORS; ARTIFICIAL INTELLIGENCE; BEARINGS (STRUCTURAL); BIONICS; ELECTRIC DRIVES; ELECTRIC NETWORK ANALYSIS; ELECTRIC POWER SYSTEMS; ELECTRIC POWER TRANSMISSION NETWORKS; FUZZY NEURAL NETWORKS; INDUCTION MOTORS; INDUSTRIAL APPLICATIONS; INDUSTRIAL RESEARCH; MAINTENANCE; MOTORS; NEURAL NETWORKS; PATTERN RECOGNITION; PATTERN RECOGNITION SYSTEMS; POWER TRANSMISSION; SIGNAL PROCESSING; WAVELET TRANSFORMS;

ADAPTIVE SIGNAL PROCESSING; BEARINGS; DIAGNOSTIC REASONING; FAULT DIAGNOSIS; INDUCTION MACHINES; INDUCTION MOTOR DRIVES; INDUCTION MOTOR PROTECTION; INDUSTRIAL POWER SYSTEM MAINTENANCE; TIME-FREQUENCY ANALYSIS;

FOURIER TRANSFORMS;

EID: 57749196360     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.2007527     Document Type: Article

References (94)

1. M. Walker, The Diagnosing of Trouble in Electrical Machines. London, U.K.: Library Press, 1924.
2. P. Tavner and J. Penman, Condition Monitoring of Electrical Machines Letchworth, U.K.: Res. Stud. Press, 1987.
3. P. Vas, Parameter Estimation, Condition Monitoring and Diagnosis of Electrical Machines. Oxford, U.K.: Clarendon, 1996.
4. M. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
5. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors - A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005.
6. R.M. Tallam, S. B. Lee, G. C. Stone, G. B. Kliman, J. Yoo, T. G. Habetler, and R. G. Harley, "A survey of methods for detection of stator-related faults in induction machines," IEEE Trans. Ind. Appl. vol. 43, no. 4, pp. 920-933, Jul./Aug. 2007.
7. D. Kastha and A. K. Majumdar, "An improved starting strategy for voltage-source inverter fed three-phase induction motor drives under inverter fault conditions," IEEE Trans. Power Electron., vol. 15, no. 4, pp. 726-732, Jul. 2000.
8. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 610-619, Feb. 2008.
9. L. Parsa and H. A. Toliyat, "Five-phase permanent-magnet motor drives," IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 30-37, Jan./Feb. 2005.
10. N. Bianchi, S. Bolognani, and M. D. Pre, "Strategies for the fault-tolerant current control of a five-phase permanent-magnet motor," IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 960-970, Jul./Aug. 2007.
11. A. H. Bonnett and C. Yung, "Increased efficiency versus increased reliability," IEEE Ind. Appl. Mag., vol. 14, no. 1, pp. 29-36, Jan./Feb. 2008.
12. W. Schuisky, "Brüche im kurzschlußkäfig eines induktionsmotors und ihre einfl üsse auf das verhalten des motors (Breaks in the cage of an induction motor and their influences on the behavior of the motor)," Elect. Eng. (Archiv fur Elektrotechnik , vol. 35, no. 5, pp. 287-298, May 1941.
13. J. L. Kohler, J. Sottile, and F. C. Trutt, "Alternatives for assessing the electrical integrity of induction motors," IEEE Trans. Ind. Appl., vol. 28, no. 5, pp. 1109-1117, Sep./Oct. 1992.
14. S. Williamson and K. Mirzoian, "Analysis of cage induction motors with stator winding faults," IEEE Trans. Power App. Syst., vol. PAS-104, no. 7, pp. 1838-1842, Jul. 1985.
15. G. Gentile, N. Rotondale, M. Martelli, and C. Tassoni, "Harmonic analysis of induction motors with stator faults," Elect. Power Compon. Syst., vol. 22, no. 2, pp. 215-231, 1994.
16. G. M. Joksimovic and J. Penman, "The detection of inter-turn short circuits in the stator windings of operating motors," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1078-1084, Oct. 2000.
17. S. Nandi, "A detailed model of induction machines with saturation extendable for fault analysis," IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1302-1309, Sep./Oct. 2004.
18. C. Gerada, K. J. Bradley, M. Sumner, P. Wheeler, S. Pickering, J. Clare, C. Whitley, and G. Towers, "The results do mesh," IEEE Ind. Appl. Mag., vol. 13, no. 2, pp. 62-72, Mar./Apr. 2007.
19. J. F. Watson and D. G. Dorrell, "The use of finite element methods to improve techniques for the early detection of faults in 3-phase induction motors," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 655-660, Sep. 1999.
20. J. L. Kohler, J. Sottile, and F. C. Trutt, "Condition monitoring of stator windings in induction motors. I. Experimental investigation of the effective negative-sequence impedance detector," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1447-1453, Sep./Oct. 2002.
21. J. Sottile, F. C. Trutt, and J. L. Kohler, "Condition monitoring of stator windings in induction motors. II. Experimental investigation of voltage mismatch detectors," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1454-1459, Sep./Oct. 2002.
22. S. B. Lee, R. M. Tallam, and T. G. Habetler, "A robust, on-line turnfault detection technique for induction machines based on monitoring the sequence component impedance matrix," IEEE Trans. Power Electron., vol. 18, no. 3, pp. 865-872, May 2003.
23. F. Filippetti, G. Franceschini, C. Tassoni, S. Meo, and A. Ometto, "A simplified model of induction motor with stator shorted turns oriented to diagnostics," in Proc. ICEM, 1996, pp. 410-413.
24. S. M. A. Cruz and A. J. M. Cardoso, "Multiple reference frames theory: A new method for the diagnosis of stator faults in three-phase induction motors," IEEE Trans. Energy Convers., vol. 20, no. 3, pp. 611-619, Sep. 2005.
25. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Transient model for induction machines with stator winding turn faults," IEEE Trans. Ind. Appl., vol. 38, no. 3, pp. 632-637, May/Jun. 2002.
26. M. Arkan, D. K. Perovic, and P. Unsworth, "Online stator fault diagnosis in induction motors," Proc. Inst. Elect. Eng. - Elect. Power Appl., vol. 148, no. 6, pp. 537-547, Nov. 2001.
27. B. Mirafzal, R. J. Povinelli, and N. A. O. Demerdash, "Interturn fault diagnosis in induction motors using the pendulous oscillation phenomenon," IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 871-882, Dec. 2006.
28. F. Briz, M. W. Degner, A. B. Diez, and J. M. Guerrero, "Online diagnostics in inverter-fed induction machines using high-frequency signal injection," IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1153-1161, Jul./Aug. 2004.
29. A. Bellini, C. Concari, G. Franceschini, E. Lorenzani, and C. Tassoni, "Induction drives diagnosis by signal injection: Effectiveness and severity classification," in Proc. IEEE IEMDC, 2005, pp. 718-727.
30. H. Okubo, N. Hayakawa, and G.C. Montanari, "Technical development on partial discharge measurement and electrical insulation techniques for low voltage motors driven by voltage inverters," IEEE Trans. Dielectr. Electr. Insul., vol. 14, no. 6, pp. 1516-1530, Dec. 2007.
31. G. B. Kliman and J. Stein, "Methods of motor current signature analysis," Elect. Power Compon. Syst., vol. 20, no. 5, pp. 463-474, Sep. 1992.
32. A. Bellini, F. Filippetti, G. Franceschini, C. Tassoni, and G. B. Kliman, "Quantitative evaluation of induction motor broken bars by means of electrical signature analysis," IEEE Trans. Ind. Appl., vol. 37, no. 5, pp. 1248-1255, Sep./Oct. 2001.
33. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "AI techniques in induction machines diagnosis including the speed ripple effect," IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 98-108, Jan./Feb. 1998.
34. F. Filippetti, M. Martelli, G. Franceschini, and C. Tassoni, "Development of expert system knowledge base to on-line diagnosis of rotor electrical faults of induction motors," in Conf. Rec. IEEE IAS Annu. Meeting, Houston, TX, Oct. 1992, pp. 92-99.
35. A. Bellini, F. Filippetti, G. Franceschini, C. Tassoni, R. Passaglia, M. Saottini, G. Tontini, M. Giovannini, and A. Rossi, "On-field experience with online diagnosis of large induction motors cage failures using MCSA," IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1045-1053, Jul./Aug. 2002.
36. G. H. Muller and C. F. Landy, "A novel method to detect broken rotor bars in squirrel cage induction motors when interbar currents are present," IEEE Trans. Energy Convers., vol. 18, no. 1, pp. 71-79, Mar. 2003.
37. C. Hargis, B. Gaydon, and K. Kamash, "The detection of rotor defects in induction motors," in Proc. IEE Conf. Elect. Mach., 1982, pp. 216-220.
38. W. T. Thomson and M. Fenger, "Case histories of current signature analysis to detect faults in induction motor drives," in Proc. IEEE IEMDC, Jun. 2003, vol. 3, pp. 1459-1465.
39. I. M. Culbert and W. Rhodes, "Using current signature analysis technology to reliably detect cage winding defects in squirrel-cage induction motors," IEEE Trans. Ind. Appl., vol. 43, no. 2, pp. 422-428, Mar./Apr. 2007.
40. H. Jin, N. Faliang, and Y. Jiaqiang, "Using current signature analysis technology to reliably detect cage winding defects in squirrel-cage induction motors," Front. Elect. Electron. Eng. China, vol. 2, no. 1, pp. 117-122, 2007.
41. B. Ayhan, M. Y. Chow, and M. H. Song, "Multiple discriminant analysis and neural-network-based monolith and partition fault-detection schemes for broken rotor bar in induction motors," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1298-1308, Jun. 2006.
42. C. Kral, R. S. Wieser, F. Pirker, and M. Schagginger, "Sequences of field-oriented control for the detection of faulty rotor bars in induction machines - the Vienna Monitoring Method," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1042-1050, Oct. 2000.
43. C. Kral, F. Pirker, and G. Pascoli, "Model-based detection of rotor faults without rotor position sensor - The sensorless Vienna monitoring method," IEEE Trans. Ind. Appl., vol. 41, no. 3, pp. 784-789, May/Jun. 2005.
44. Z. Liu, X. Yin, Z. Zhang, D. Chen, and W. Chen, "Online rotor mixed fault diagnosis way based on spectrum analysis of instantaneous power in squirrel cage induction motors," IEEE Trans. Energy Convers., vol. 19, no. 3, pp. 485-490, Sep. 2004.
45. G. Didier, E. Ternisien, O. Caspary, and H. Razik, "Fault detection of broken rotor bars in induction motor using a global fault index," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 79-88, Jan./Feb. 2006.
46. A. H. Bonnett, "Root cause AC motor failure analysis with a focus on shaft failures," IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1435-1448, Sep./Oct. 2000.
47. J. H. Jung and B. H. Kwon, "Corrosion model of a rotor-bar-under-fault progress in induction motors," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1829-1841, Dec. 2006.
48. A. Bellini, F. Filippetti, G. Franceschini, N. Petrolini, and C. Tassoni, "Online diagnosis in induction drives rotor by signal injection technique: Fault localisation and severity classification," in Proc. IEEE SDEMPED, 2001, pp. 531-536.
49. R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartfield, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
50. J. R. Stack, T. G. Habetler, and R. G. Harley, "Fault-signature modeling and detection of inner-race bearing faults," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 61-68, Jan./Feb. 2006.
51. A. R. Mohanty and C. Kar, "Fault detection in a multistage gearbox by demodulation of motor current waveform," IEEE Trans. Ind. Electron. vol. 53, no. 4, pp. 1285-1297, Jun. 2006.
52. G. Salles, F. Filippetti, C. Tassoni, G. Crellet, and G. Franceschini, "Monitoring of induction motor load by neural network techniques," IEEE Trans. Power Electron., vol. 15, no. 4, pp. 762-768, Jul. 2000.
53. C. Kral, T. G. Habetler, and R. G. Harley, "Detection of mechanical imbalances of induction machines without spectral analysis of timedomain signals," IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1101-1106, Jul./Aug. 2004.
54. M. Blodt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008.
55. M. E. Badaoui, F. Guillet, and J. Danire, "New applications of the real cepstrum to gear signals, including definition of a robust fault indicator," Mech. Syst. Signal Process., vol. 18, no. 5, pp. 1031-1046, Sep. 2004.
56. M. Blodt, D. Bonacci, J. Regnier, M. Chabert, and J. Faucher, "On-line monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 522-533, Feb. 2008.
57. G. M. Joksimovic, "Dynamic simulation of cage induction machine with air gap eccentricity," Proc. Inst. Elect. Eng. - Elect. Power Appl. vol. 152, no. 4, pp. 803-811, Jul. 2005.
58. R. Ong, J. H. Dymond, and R. D. Findlay, "Bearing damage analysis in a large oil-ring-lubricated induction machine," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1085-1091, Oct. 2000.
59. H. A. Toliyat, M. S. Arefeen, and A. G. Parlos, "A method for dynamic simulation of air-gap eccentricity in induction machines," IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 910-918, Jul./Aug. 1996.
60. W. T. Thomson, D. Rankin, and D. G. Dorrell, "On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors - Industrial case histories verify the predictions," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1372-1378, Dec. 1999.
61. J. Faiz, B. M. Ebrahimi, B. Akin, and H. A. Toliyat, "Finite-element transient analysis of induction motors under mixed eccentricity fault," IEEE Trans. Magn., vol. 44, no. 1, pp. 66-74, Jan. 2008.
62. S. Nandi, S. Ahmed, H. A. Toliyat, and R. M. Bharadwaj, "Selection criteria of induction machines for speed-sensorless drive applications," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 704-712, May/Jun. 2003.
63. I. Penman, M. N. Dey, A. I. Tail, and W. E. Bryan, "Condition monitoring of electrical drives," Proc. Inst. Elect. Eng. - Part B vol. 133, no. 3, pp. 142-148, May 1986.
64. H. Henao, C. Demian, and G. A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1272-1279, Sep./Oct. 2003.
65. F. Cupertino, E. de Vanna, L. Salvatore, and S. Stasi, "Analysis techniques for detection of IM broken rotor bars after supply disconnection," IEEE Trans. Ind. Appl., vol. 40, no. 2, pp. 526-533, Mar./Apr. 2004.
66. S. Kia Hedayati, H. Henao, and G. A. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2305-2314, Aug. 2007.
67. A. Bellini, F. Filippetti, G. Franceschini, and C. Tassoni, "Closed-loop control impact on the diagnosis of induction motors faults," IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1318-1329, Sep./Oct. 2000.
68. A. Bellini, G. Franceschini, and C. Tassoni, "Monitoring of induction machines by maximum covariance method for frequency tracking," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 69-78, Jan./Feb. 2006.
69. M. E. H. Benbouzid and G. B. Kliman, "What stator current processing-based technique to use for induction motor rotor faults diagnosis?" IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, Jun. 2003.
70. S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, "Detection of rotor faults in brushless DC motors operating under nonstationary conditions," IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1464-1477, Nov./Dec. 2006.
71. H. Douglas, P. Pillay, and A. K. Ziarani, "A new algorithm for transient motor current signature analysis using wavelets," IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1361-1368, Sep./Oct. 2004.
72. T. W. S. Chow and S. Hai, "Induction machine fault diagnostic analysis with wavelet technique," IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 558-565, Jun. 2004.
73. M. Riera-Guasp, J. A. Antonino-Daviu, J. Roger-Folch, and M. P. Molina Palomares, "The use of the wavelet approximation signal as a tool for the diagnosis of rotor bar failures," IEEE Trans. Ind. Appl., vol. 44, no. 3, pp. 716-726, May/Jun. 2008.
74. J. Cusido, L. Romeral, J. A. Ortega, J. A. Rosero, and A. Garcia Espinosa, "Fault detection in induction machines using power spectral density in wavelet decomposition," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 633-643, Feb. 2008.
75. W. T. Thomson and M. Fenger, "Current signature analysis to detect induction motor faults," IEEE Ind. Appl. Mag., vol. 7, no. 4, pp. 26-34, Jul./Aug. 2001.
76. J. H. Jung, J. J. Lee, and B. H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
77. K. Kim and A. G. Parlos, "Induction motor fault diagnosis based on neuropredictors and wavelet signal processing," IEEE/ASME Trans. Mechatronics, vol. 7, no. 2, pp. 201-219, Jun. 2002.
78. J. S. Hsu, "Monitoring of defects in induction motors through airgap torque observation," IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1016-1021, Sep./Oct. 1995.
79. C. Demian, A. Mpanda-Mabwe, H. Henao, and G. A. Capolino, "Detection of induction machines rotor faults at standstill using signals injection," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1550-1559, Nov./Dec. 2004.
80. M. A. Awadallah and M. M. Morcos, "Application of AI tools in fault diagnosis of electrical machines and drives-an overview," IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 245-251, Jun. 2003.
81. S. Altug, M.-Y. Chen, and H. J. Trussell, "Fuzzy inference systems implemented on neural architectures for motor fault detection and diagnosis," IEEE Trans. Ind. Electron., vol. 46, no. 6, pp. 1069-1079, Dec. 1999.
82. M. Y. Chow, P. M. Mangum, and S. O. Yee, "A neural network approach to real-time condition monitoring of induction motors," IEEE Trans. Ind. Electron., vol. 38, no. 6, pp. 448-453, Dec. 1991.
83. J. Penman and C. M. Yin, "Feasibility of using unsupervised learning, artificial neural networks for the condition monitoring of electrical machines," Proc. Inst. Elect. Eng. - Elect. Power Appl., vol. 141, no. 6, pp. 317-322, Nov. 1994.
84. F. Filippetti, G. Franceschini, and C. Tassoni, "Neural networks aided online diagnostics of induction motor rotor faults," IEEE Trans. Ind. Appl., vol. 31, no. 4, pp. 892-899, Jul./Aug. 1995.
85. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 994-1004, Oct. 2000.
86. B. Li, M. Y. Chow, Y. Tipsuwan, and J. C. Hung, "Neural-network-based motor rolling bearing fault diagnosis," IEEE Trans. Ind. Electron. vol. 47, no. 5, pp. 1060-1069, Oct. 2000.
87. F. Zidani, M. E. H. Benbouzid, D. Diallo, and M. S. Nait-Said, "Induction motor stator faults diagnosis by a current Concordia pattern-based fuzzy decision system," IEEE Trans. Energy Convers. vol. 18, no. 4, pp. 469-475, Dec. 2003.
88. H. Su and K. T. Chong, "Induction machine condition monitoring using neural network modeling," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 241-249, Feb. 2007.
89. J. F. Martins, V. F. Pires, and A. J. Pires, "Unsupervised neural-network-based algorithm for an on-line diagnosis of three-phase induction motor stator fault," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 259-264, Feb. 2007.
90. O. Ondel, E. Boutleux, and G. Clerc, "A method to detect broken bars in induction machine using pattern recognition techniques," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 916-923, Jul./Aug. 2006.
91. M. S. Ballal, Z. J. Khan, H. M. Suryawanshi, and R. L. Sonolikar, "Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250-258, Feb. 2007.
92. F. Zidani, D. Diallo, M. E. H. Benbouzid, and R. Nait-Said, "A fuzzy-based approach for the diagnosis of fault modes in a voltage-fed PWM inverter induction motor drive," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 586-593, Feb. 2008.
93. P. Vas and A. Stronach, "Minimum configuration soft-computing-based DSP controlled drives," in Proc. PCIM, Nuremburg, Germany, 1996, pp. 299-315.
94. C.-E. Kim, Y.-B. Jung, S.-B. Yoon, and D.-H. Im, "The fault diagnosis of rotor bars in squirrel cage induction motors by time-stepping finite element method," IEEE Trans. Magn., vol. 33, no. 2, pp. 2131-2134, Mar. 1997.