Influence of PEEK surface modification on surface properties and bond strength to veneering resin composites

Journal of Adhesive Dentistry

Volumn 16, Issue 4, 2014, Pages 383-392

  Keul, Christine ^a   Liebermann, Anja ^a   Schmidlin, Patrick R ^b   Roos, Malgorzata ^c   Sener, Beatrice ^b   Stawarczyk, Bogna ^a  

^a UNIVERSITY OF MUNICH   (Germany)

^b UNIVERSITY OF ZURICH   (Switzerland)

^c UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

Acid etching; Coupling agents; PEEK; Piranha solution; Surface treatment; Tensile bond strength; Veneering resin composites

Indexed keywords

ACRYLIC ACID DERIVATIVE; BIOMATERIAL; DENTAL MATERIAL; HELIOBOND; HYDROGEN PEROXIDE; KETONE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID METHYL ESTER; METHACRYLOXYPROPYLTRIMETHOXYSILANE; MONOBOND S; POLY(METHYL METHACRYLATE); POLYETHERETHERKETONE; RESIN; RESIN CEMENT; SILANE DERIVATIVE; SULFURIC ACID; TOOTH CEMENT; WATER;

CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL ETCHING; DENTAL VENEER; MATERIALS TESTING; MECHANICAL STRESS; PROCEDURES; SURFACE PROPERTY; SURFACE TENSION; TEMPERATURE; TENSILE STRENGTH; TIME; WETTABILITY;

ACID ETCHING, DENTAL; ACRYLATES; COATED MATERIALS, BIOCOMPATIBLE; COMPOSITE RESINS; DENTAL BONDING; DENTAL CEMENTS; DENTAL ETCHING; DENTAL MATERIALS; DENTAL VENEERS; HYDROGEN PEROXIDE; KETONES; MATERIALS TESTING; METHACRYLATES; METHYLMETHACRYLATES; POLYETHYLENE GLYCOLS; POLYMETHYL METHACRYLATE; RESIN CEMENTS; SILANES; STRESS, MECHANICAL; SULFURIC ACIDS; SURFACE PROPERTIES; SURFACE TENSION; TEMPERATURE; TENSILE STRENGTH; TIME FACTORS; WATER; WETTABILITY;

EID: 84908312277     PISSN: 14615185     EISSN: 17579988     Source Type: Journal    
DOI: 10.3290/j.jad.a32570     Document Type: Article

References (29)

1. Andrade AM, Moura SK, Reis A, Loguercio AD, Garcia EJ and Grande RHM. Evaluating resin-enamel bonds by microshear and microtensile bond strength tests: effect of composite resin. J Appl Oral Sci 2010;18:591-598
2. Bähr N, Keul C, Edelhoff D, Eichberger M, Roos M, Gernet W, Stawarczyk B. Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dent Mater J 2013;32:492-501
3. Bayer S, Komor N, Kramer A, Albrecht D, Mericske-Stern R, Enkling, N. Retention force of plastic clips on implant bars: a randomized controlled trial. Clin Oral Implants Res 2012;23:1377-1384
4. Benetti P, Della Bona A, Kelly JR. Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement. Dent Mater 2010;26:743-750
5. Boehm RF. Thermal environment of teeth during open-mouth respiration. J Dent Res 1972;51:75-78
6. Ersu, B, Yuzugullu B, Ruya Yazici A, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 2009;37:848-856
7. Hallmann L, Mehl A, Sereno N, Hämmerle CHF. The improvement of adhesive properties of PEEK through different pre-treatments. Appl Surf Sci 2012;258:7213-7218
8. Holderegger C, Sailer I, Schuhmacher C, Schläpfer R, Hämmerle CH, Fischer J. Shear bond strength of resin cements to human dentin. Dent Mater 2008;24:944-950
9. Kern M, Lehmann F. Influence of surface conditioning on bonding to polyetheretherketon (PEEK). Dent Mater 2012;28:1280-1283
10. Khoroushi M, Rafiei E. Effect of thermocycling and water storage on bond longevity of two self-etch adhesives. Gen Dent 2013;61:39-44
11. Kurtz SM, Devine JN. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials 2007;28:4845-4869
12. Longman CM, Pearson GJ. Variation in tooth surface temperature in the oral cavity during fluid intake. Biomaterials 1987;8:411-414
13. Marshall SJ, Bayne SC, Baier R, Tomsia AP, Marshall GW. A review of adhesion science. Dent Mater 2010;26:e11-16. Erratum in Dent Mater 2010;26:e195
14. Ourahmoune R, Salvia M, Mathia TG, Mesrati N. Surface morphology and wettability of sandblasted PEEK and its composites. Scanning 2014;36:64-75
15. Packham DE. Surface energy, surface topography and adhesion. Int J Adhesion Adhes 2003;23:437-448
16. Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 1992;67:325-327
17. Piwowarczyk A, Lauer HC, Sorensen JA. In vitro shear bond strength of cementing agents to fixed prosthodontics restorative materials. J Prosthet Dent 2004;92:265-273
18. Santing HJ, Meijer HJ, Raghoebar GM, özcan M. Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments. Clin Implant Dent Relat Res 2010;14:882-889
19. Schmidlin PR, Stawarczyk B, Wieland M, Attin T, Hämmerle CH, Fischer J. Effect of different surface pre-treatment and luting materials on shear bond strength to PEEK. Dent Mater 2010;26:553-559
20. Sezinando A, Perdigão J, Regalheiro R. Dentin bond strengths of four adhesion strategies after thermal fatigue and 6-month water storage. J Esthet Restor Dent 2012;24:345-355
21. Stawarczyk B, Bähr N, Beuer F, Wimmer T, Eichberger M, Gernet W, Jahn D, Schmidlin PR. Influence of plasma pretreatment on shear bond strength of self-adhesive resin cements to polyetheretherketone. Clin Oral Investig 2014;18:163-170
22. Stawarczyk B, Basler T, Ender A, Roos M, özcan M, Hämmerle, C. Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements. J Prosthet Dent 2012;107:94-101
23. Stawarczyk B, Beuer F, Wimmer T, Jahn D, Sener B, Roos M, Schmidlin PR. Polyetheretherketone-A suitable material for fixed dental prostheses? J Biomed Mater Res B Appl Biomater 2013;101:1209-1216
24. Stawarczyk B, Keul C, Beuer F, Roos M, Schmidlin PR. Tensile bond strength of veneering resin to PEEK: impact of different adhesives. Dent Mater J 2013;32:441-448
25. Tannous F, Steiner M, Shahin R, Kern M. Retentive forces and fatigue resistance of thermoplastic resin clasps. Dent Mater 2012;28: 273-278
26. Tetelman ED, Babbush CA. A new transitional abutment for immediate aesthetics and function. Implant Dent 2008;17:51-58
27. Torstenson B, Brännström M. Contraction gap under composite resin restorations: effect of hygroscopic expansion and thermal stress. Oper Dent 1988;13:24-31
28. Toth JM, Wang M, Estes BT, Scifert JL, Seim HB 3rd, Turner AS. Polyetheretherketone as a biomaterial for spinal applications. Biomaterials 2006;27:324-334
29. Wilson EB. Probable inference, the law of succession, and statistical inference. J Am Stat Ass 1927;22:209-212