Surface morphology and wettability of sandblasted PEEK and its composites

Scanning

Volumn 36, Issue 1, 2014, Pages 64-75

  Ourahmoune, R ^a   Salvia, M ^a   Mathia, T G ^a   Mesrati, N ^b  

^a LABORATOIRE DE TRIBOLOGIE ET DYNAMIQUE DES SYSTÈMES   (France)

^b ECOLE NATIONALE POLYTECHNIQUE   (Algeria)

Author keywords

abrasive surface treatment; composites; PEEK; roughness; sandblasting; wettability

Indexed keywords

ABRASIVE SURFACE; DENSITY DISTRIBUTIONS; EXPERIMENTAL APPROACHES; SANDBLASTING; SURFACE ROUGHNESS PARAMETERS; THERMOPLASTIC POLYMER; WETTABILITY CHARACTERISTICS; WETTABILITY MEASUREMENTS;

CARBON FIBERS; CHARACTERIZATION; COMPOSITE MATERIALS; POLYETHER ETHER KETONES; SURFACE MORPHOLOGY; SURFACE ROUGHNESS; SURFACE TOPOGRAPHY; SURFACE TREATMENT; TWO DIMENSIONAL; WETTING;

PARAMETER ESTIMATION;

ALUMINUM OXIDE; CARBON FIBER; GLASS FIBER; POLYETHERETHERKETONE; POLYMER;

ABRASIVE BLASTING; ARTICLE; CALORIMETER; CERAMICS; COMPOSITE MATERIAL; CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; HEAT; MEASUREMENT; MORPHOLOGY; PHYSICAL PARAMETERS; PRIORITY JOURNAL; PROCESSING; ROUGHNESS; SURFACE PROPERTY; TEMPERATURE; VISCOSITY; WETTABILITY;

EID: 84893761798     PISSN: 01610457     EISSN: 19328745     Source Type: Journal    
DOI: 10.1002/sca.21089     Document Type: Article

References (32)

1. Anfor nf e.05.015. 1984. pans: Anfor, 1984.
2. Bahbou M, Nylén P, Wigren J., 2004. Effect of grit blasting and spraying angle on the adhesion strength of a plasma-sprayed coating. J Therm Spray Tech 13: 508-514.
3. Blanc J, Grime D, Blateyron F., 2011. Surface characterization based upon significant topographic features. J Phys Conf Ser 311: 012014.
4. Cassie ABD, Baxter S., 1944. Wettability of porous surfaces. Trans Faraday Soc 40: 546-551.
5. Chow TS., 1998. Wetting of rough surfaces. J Phys 10: L445.
6. Day M, Deslandes Y, Roovers J, Suprunchuk T., 1991. Effect of molecular weight on the crystallization behaviour of poly (aryl ether ether ketone): a differential scanning calorimetry study. Polymer 32: 1258-1266.
7. Folkes MJ, Kalay G, Ankara A., 1993. The effect of heat treatment on the properties of PEEK and APC2. Compos Sci Technol 46: 77-83.
8. Gao SL, Kim JK., 2000. Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion. Compos A: Appl Sci Manuf 31: 517-530.
9. Hnatowicz V, Havránek V, Bocan J, Macková A, Vacík J, Švorcík V., 2008. Modification of poly(ether ether ketone) by ion irradiation. Nucl Instrum Methods Phys Res Sect B 266: 283.
10. Ivosevic M, Gupta V, Knight R, et al,. 2006. Effect of substrate roughness on splatting behavior of HVOF sprayed polymer particles: modeling and experiments. J Therm Spray Tech 15: 725-730.
11. Kubiak KJ, Mathia TG, Wilson MCT., 2009. Proceedings of 14th international congress of metrology, Paris. p 22-25.
12. Kubiak KJ, Wilson MCT, Mathia TG, Carval Ph., 2010. Wettability versus roughness of engineering surfaces. Wear 271: 523-528.
13. Kubiak KJ, Wilson MCT, Mathia TG, Carras S., 2011. Dynamic of contact line motion during the wetting of rough surfaces and correlation with topographical surface parameters. Scanning 33: 370-377.
14. Kubiak KJ, Bigrelle M, Mathia TG, Wilson MCT, Carras S., 2012. Surface metrology in modelling wetting dynamics of rough interfaces for bio-applications, Proceedings of International conference on surface metrology, Annecy, France.
15. Mata F, Gaitonde V-N, Karnik S-R, Davim J-P., 2009. Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools. J Mater Process Technol 209: 1980-1987.
16. Mathia TG, Pawlus P, Wieczorowski M., 2011. Recent trends in surface metrology. Wear 271: 494-508.
17. May R., 1988. Polyetheretherketones. In:, Mark HF, Bikales NM, Overberger CG, Menges G, Kroschiwitz JI, editors. Encyclopedia of polymer science and engineering. New York: Wiley. p 313-320.
18. Nowicki B., 1985. Multiparameter representation of surface roughness. Wear 69: 161-176.
19. Ostrovskaya L, Podestà A, Milani P, Ralchenko V., 2003. Influence of surface morphology on the wettability of cluster-assembled carbon films. Europhys Lett 63: 401.
20. Ourahmoune R, Salvia M, Mathia TG, et al,. 2011. Structure influence of sandblasted PEEK and its composites on surface roughness and wettability, Proceedings of 4th international conference on structure analysis of advanced materials, Bucharest, Roumania. p 246-256.
21. Ourahmoune R, Salvia M, Mathia TG, et al,. 2011. Effect of sandblasting substrate treatment on single lap shear strength of adhesively bonded PEEK and its composites, Proceedings of 18th international conference on composite materials, Jeju island Korea.
22. Palathai T, Tharajak J, Sombatsompop N., 2008. Hardness adhesion index and microstructure of PEEK coating on Al or Fe substrate by LVOF flame spray. Mater Sci Eng A 485: 66-73.
23. Patel K, Doyle C-S, Yonekura D, James BJ., 2010. Effect of surface roughness parameters on thermally sprayed PEEK coatings. Surf Coat Technol 204: 3567-3572.
24. Rigby RB., 1985. Polyetheretherketone. In:, Margolis JM, editor. Engineering thermoplastics: properties and applications. New York: Marcel Dekker, Inc. p 299-314.
25. Sbox drawings light down and leftnmazçelik T, Yilmaz T., 2007. Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites. Mater Des 28: 641-648.
26. Schmidlin R, Stawarczyk B, Wieland M, et al,. 2010. Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK". Dental Mater 26: 553-559.
27. Stout KJ, Sullivan PJ, Dong WP, Mainsah E, Luo N, Mathia TG, Zahouani H., 1993. The development of methods for the characterisation of roughness in three dimensions. Commission of the European Communities. p 216-240.
28. Szuder A, Lamy B, Mathia TG., 1994. Tehnologii Calitatte Masini Materiale N° 9 Ed. TEHNICÂ, p 344-349.
29. Thomas TR, Chariten G., 1981. Variation of roughness parameters on some typical manufactured surfaces. Precis Eng 32: 91-96.
30. Wenzel RN., 1936. Resistance of solid surfaces to wetting by water. Ind Eng Chem 28: 988-994.
31. Whitehouse D., 2002. Surfaces and their measurements. Hermes Penton Science edition, 51-52.
32. Zhang G, Schlarb AK., 2009. Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with different molecular weights and their fiber filled composites. Wear 266: 337-344.