Polyetheretherketone - A suitable material for fixed dental prostheses?

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 101, Issue 7, 2013, Pages 1209-1216

  Stawarczyk, Bogna ^a   Beuer, Florian ^a   Wimmer, Timea ^a   Jahn, Dirk ^b   Sener, Beatrice ^c   Roos, Malgorzata ^d   Schmidlin, Patrick R ^c  

^a UNIVERSITY OF MUNICH   (Germany)

^b nt trading GmbH   (Germany)

^c UNIVERSITY OF ZURICH   (Switzerland)

^d UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

bond strength; conditioning; contact angles; fracture load; PEEK; polyetheretherketone; roughness

Indexed keywords

DESCRIPTIVE STATISTICS; FRACTURE LOAD; ONE-WAY ANOVA; ROCATEC SYSTEMS; SHEAR BOND STRENGTHS; SILICA COATINGS; STUDENT'S T TESTS; WEIBULL STATISTICS;

ALUMINA; BOND STRENGTH (MATERIALS); CONTACT ANGLE; ETCHING; NATURAL GAS CONDITIONING; POLYETHER ETHER KETONES; SILICA; SURFACE ROUGHNESS; VENEERS; WEIBULL DISTRIBUTION;

FRACTURE;

ALUMINUM OXIDE; FRUCTOSE BISPHOSPHATE; POLYETHERETHERKETONE; SILICON DIOXIDE; SULFURIC ACID;

ARTICLE; CONTACT ANGLE; MEASUREMENT; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS;

BOND STRENGTH; CONDITIONING; CONTACT ANGLES; FRACTURE LOAD; PEEK; POLYETHERETHERKETONE; ROUGHNESS;

BIOCOMPATIBLE MATERIALS; DENTAL VENEERS; KETONES; MATERIALS TESTING; POLYETHYLENE GLYCOLS; STRESS, MECHANICAL;

EID: 84884205453     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.32932     Document Type: Article

References (31)

1. Kurtz SM, Devine JN,. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials 2007; 28: 4845-4869.
2. Toth JM, Wang M, Estes BT, Scifert JL, Seim HB 3rd, Turner AS,. Polyetheretherketone as a biomaterial for spinal applications. Biomaterials 2006; 27: 324-334.
3. Tetelman ED, Babbush CA,. A new transitional abutment for immediate aesthetics and function. Implant Dent 2008; 17: 51-58.
4. Santing HJ, Meijer HJ, Raghoebar GM, Ozcan M,. Fracture strength and failure mode of maxillary implant-supported provisional single crowns: A comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments. Clin Implant Dent Relat Res 2012; 14: 882-889.
5. Bayer S, Komor N, Kramer A, Albrecht D, Mericske-Stern R, Enkling N,. Retention force of plastic clips on implant bars: A randomized controlled trial. Clin Oral Implants Res 2012; 23: 1377-1384.
6. Tannous F, Steiner M, Shahin R, Kern M,. Retensive forces and fatigue resistance of thermoplastic resin clasps. Dent Mater 2012; 28: 273-278.
7. Noiset O, Schneider YJ, Marchand-Brynaert J,. Adhesion and growth of CaCo2 cells on surface-modified PEEK substrata. J Biomater Sci Polym Ed 2000; 11: 767-786.
8. Ohl A, Schröder K, Keller D, Meyer-Plath A, Bienert H, Husen B, Rune GM,. Chemical micropatterning of polymeric cell culture substrates using low-pressure hydrogen gas discharge plasmas. J Mater Sci Mater Med 1999; 10: 747-754.
9. Schmidlin PR, Stawarczyk B, Wieland M, Attin T, Hammerle CH, Fischer J,. Effect of different surface pre-treatment and luting materials on shear bond strength to PEEK. Dent Mater 2010; 26: 553-559.
10. Lüthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Hämmerle CH,. Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater 2005; 21: 930-937.
11. Stawarczyk B, Ender A, Trottmann A, Özcan M, Fischer J, Hämmerle CH,. Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens. Clin Oral Investig 2012; 16: 1669-1977.
12. Wissenschaftliche Tabellen Geigy, Teilband Statistik, 8. Auflage, Basel, 1980 CIBA-GEIGY Limited, Basel, Switzerland.
13. Schwitalla AD, Müller WD,. PEEK dental implants: A review of the literature. J Oral Implantol 2011 [epub ahead].
14. Della Bona A, Shen C, Anusavice KJ,. Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater 2004; 20: 338-344.
15. Benetti PA, Della Bona A, Kelly JR,. Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement. Dent Mater 2010; 26: 743-750.
16. Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ,. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 2005; 21: 984-991.
17. Hallmann L, Mehl A, Sereno N, Hämmerle CH,. The improvement of adhesive properties of PEEK through pre-treatments. Appl Surf Sci 2012; 258: 7213-7218.
18. Kern M, Lehmann F,. Influence of surface conditioning on bonding to polyetheretherketone (PEEK). Dent Mater 2012; 28: 1280-1283.
19. Rupp F, Scheideler L, Rehbein D, Axmann D, Geis-Gerstorfer J,. Roughness induced dynamic changes of wettability of acid etched titanium implant modifications. Biomaterials 2004; 25: 1429-1438.
20. Rupp F, Scheideler L, Eichler M, Geis-Gerstorfer J,. Wetting behavior of dental implants. Int J Oral Maxillofac Implants 2011; 26: 1256-1266.
21. Wood DJ, Johnson A, Van Noort R, Sereno N,. Bonding of polyetheretherketone (PEEK) for indirect restorations. IADR Abstract 2949, San Diego 2011.
22. Invibio, biomaterial solution. New material options for innovation in restorative and prosthetic dentistry. 2011.
23. Kolbeck C, Behr M, Rosentritt M, Handel G,. Fracture force of tooth-tooth- and implant-tooth-supported all-ceramic fixed partial dentures using titanium vs. customised zirconia implant abutments. Clin Oral Implants Res 2008; 19: 1049-1053.
24. Ivoclar Vivadent, Lithium disilicate (LS2) Scientific Report. 2011.
25. Behr M, Rosentritt M, Lang R, Handel G,. Glass fiber-reinforced abutments for dental implants. A pilot study. Clin Oral Implants Res 2001; 12: 174-178.
26. Fischer H, Weber M, Eck M, Erdrich A, Marx R,. Finite element and experimental analyses of polymer-based dental bridges reinforced by ceramic bars. J Biomech 2004; 37: 289-294.
27. Mahmood DJ, Linderoth EH, Vult von Steyern P,. The influence of support properties and complexity on fracture strength and fracture mode of all-ceramic fixed dental prostheses. Acta Odontol Scand 2011; 69: 229-237.
28. Scherrer SS, de Rijk WG,. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 1993; 6: 462-467.
29. Stawarczyk B, Özcan M, Hämmerle CH, Roos M,. The fracture load and failure types of veneered anterior zirconia crowns: An analysis of normal and Weibull distribution of complete and censored data. Dent Mater 2012; 28: 478-487.
30. Quinn JB, Quinn GD,. A practical and systematic review of Weibull statistics for reporting strength of dental materials. Dent Mater 2010; 26: 135-147.
31. copponnex T, De Carmine A,. Reevaluating thermoplastics. European Medical Device Manufacturer 2009; March/April 26-27.