Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments

Journal of Dentistry

Volumn 37, Issue 11, 2009, Pages 848-856

  Ersu, Bahadir ^a   Yuzugullu, Bulem ^b   Ruya Yazici, A ^a   Canay, Senay ^a  

^a HACETTEPE UNIVERSITY   (Turkey)

^b BASKENT UNIVERSITY   (Turkey)

Author keywords

CO2 laser; Glass infiltrated alumina ceramic; Shear bond strength; Surface roughness; Surface treatment

Indexed keywords

ALUMINUM OXIDE; GLASS; MAGNESIUM OXIDE; MULTILINK ADHESIVE SYSTEM; RESIN CEMENT; SPINELL; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; DENTAL BONDING; DENTAL CARE; DENTAL ETCHING; DENTAL SURGERY; DENTIN; HUMAN; INSTRUMENTATION; LASER; MATERIALS TESTING; METHODOLOGY; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS;

AIR ABRASION, DENTAL; ALUMINUM OXIDE; DENTAL ETCHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DENTIN; GLASS; HUMANS; LASERS, GAS; MAGNESIUM OXIDE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SELF-CURING OF DENTAL RESINS; SHEAR STRENGTH; SURFACE PROPERTIES; ZIRCONIUM;

EID: 70249108785     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2009.06.017     Document Type: Article

References (52)

1. Sen D., Poyrazoglu E., Tuncelli B., and Göller G. Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores. Journal of Prosthetic Dentistry 83 (2000) 210-215
2. Blatz M.B., Sadan A., and Kern M. Resin-ceramic bonding: a review of the literature. Journal of Prosthetic Dentistry 89 (2003) 268-274
3. Magne P., and Belser U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. International Journal of Prosthodontics 10 (1997) 459-466
4. Haselton D.R., Diaz-Arnold A.M., and Hills S.L. Clinical assessment of high-strength all-ceramic crowns. Journal of Prosthetic Dentistry 83 (2000) 396-401
5. Wood D.J., Bubb N.L., Millar B.J., and Dunne S.M. Preliminary investigation of a novel retentive system for hydrofluoric acid etching resistant dental ceramics. Journal of Prosthetic Dentistry 78 (1997) 275-280
6. Sorenson J.A., Kang S.K., Torres T.J., and Knode H. In-Ceram fixed partial dentures: three year clinical trial results. Journal of the California Dental Association 26 (1998) 207-214
7. Guazzato M., Albakry M., Swain M.V., and Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. International Journal of Prosthodontics 15 (2002) 339-346
8. Sundh A., and Sjogren G. A comparison of fracture strength of yttrium-oxide partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. Journal of Oral Rehabilitation 31 (2004) 682-688
9. Tinschert J., Natt G., Mautsch W., Augthun M., and Spiekermann H. Fracture resistance of lithium disilicate-, alumina- and zirconia-based three-unit fixed partial dentures: a laboratory study. International Journal of Prosthodontics 4 (2001) 231-238
10. Scotti R., Catapano S., and D'Elia A. A clinical evaluation of In-Ceram crowns. International Journal of Prosthodontics 8 (1995) 320-323
11. Segal B.S. Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice. Journal of Prosthetic Dentistry 85 (2001) 544-550
12. Fradeani M., and Redemagni M. An 11-year clinical evaluation of leucite-reinforced glass-ceramic crowns: a retrospective study. Quintessence International 33 (2002) 503-510
13. Toksavul S., and Toman M. A short-term clinical evaluation of IPS Empress 2 crowns. International Journal of Prosthodontics 20 (2007) 168-172
14. Burke F.J., Fleming G.J., Nathanson D., and Marquis P.M. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. Journal of Adhesive Dentistry 4 (2002) 7-22
15. Rosenstiel S.F., Land M.F., and Crispin B.J. Dental luting agents: a review of the current literature. Journal of Prosthetic Dentistry 80 (1998) 280-301
16. Ozcan M., and Vallittu P.K. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dental Materials 19 (2003) 725-731
17. Ozcan M. The use of chairside silica coating for different dental applications: a clinical report. Journal of Prosthetic Dentistry 87 (2002) 469-472
18. Semmelmann J.O., and Kulp P.R. Silane bonding porcelain teeth to acrylic. Journal of American Dental Association 76 (1968) 69-73
19. Borges G.A., Sophr A.M., De Goes M.F., Sobrinho L.C., and Chan D.C.N. Effect of etching and airborne particle abrasion on the microstructure of different ceramics. Journal of Prosthetic Dentistry 89 (2003) 479-488
20. Ayad M.F., Fahmy N.Z., and Rosenstiel S.F. Effect of surface treatment on roughness and bond strength of a heat-pressed ceramic. Journal of Prosthetic Dentistry 99 (2008) 123-130
21. Ferrando J.M., Graser G.N., Tallents R.H., and Jarvis R.H. Tensile strength and microleakage of porcelain repair materials. Journal of Prosthetic Dentistry 50 (1983) 44-50
22. Lacy A.M., LaLuz J., Watanabe L.G., and Dellinges M. Effect of porcelain surface treatment on the bond to composite. Journal of Prosthetic Dentistry 60 (1988) 288-291
23. Calamia J.R. Etched porcelain veneers: the current state of art. Quintessence International 16 (1985) 5-12
24. Bailey L.F., and Bennet R.J. Dicor surface treatments for enhanced bonding. Journal of Dental Research 67 (1988) 925-931
25. Della Bona A., Borba M., Benetti P., and Cecchetti D. Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Brazilian Oral Research 21 (2007) 10-15
26. Nagayassu M.P., Shintome L.K., Uemura E.S., and Araujo J.E.J. Effect of surface treatment on the shear bond strength of a resin-based cement to porcelain. Brazilian Dental Journal 17 (2006) 290-295
27. Awliya W., Oden A., Yaman P., Dennison J.B., and Razoog M.E. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontologica Scandinavica 56 (1998) 9-13
28. Della Bona A., Donassollo T.A., Demarco F.F., Barrett A.A., and Mecholsky Jr. J.J. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dental Materials 23 (2007) 769-775
29. Maiman T.H. Stimulated optical radiation in ruby. Nature 187 (1960) 493
30. Convissar R.A., and Goldstein E.E. A combined carbon dioxide/erbium laser for soft and hard tissue procedures. Dentistry Today 20 (2001) 66-71
31. 2-Lasern. Laser u. Optoelektronik 18 (1986) 35-46
32. In: Misrendino L.J., and Pick R.M. (Eds). Lasers in dentistry (1989), Quintessence, Chicago 231-245
33. Akova T., Yoldas O., Toroglu M.S., and Uysal H. Porcelain surface treatment by laser for bracket-porcelain bonding. American Journal of Orthodontics and Dentofacial Orthopedics 128 (2005) 630-637
34. Dobberstein H., Dobberstein H., Schwarz A., Zuhrt R., and Tani Y. Laser processing of dental materials. Lasers in dentistry (1989), Elsevier Science p. 231-45
35. Rueggeberg F.A., and Lockwood P. Thermal debracketing of orthodontic resins. American Journal of Orthodontics and Dentofacial Orthopedics 98 (1990) 56-65
36. Serebro L., Segal T., Nordenberg D., Gorfil C., and Bar-Lev M. Examination of tooth pulp following laser beam irradiation. Lasers in Surgery and Medicine 7 (1987) 236-239
37. Steward G.P., Jain P., and Hodges J. Shear bond strength of resin cements to both ceramic and dentin. Journal of Prosthetic Dentistry 88 (2002) 277-284
38. Ariyaratnam M.T., Wilson M.A., Mackie I.C., and Blinkhorn A.S. A comparison of surface roughness and composite/enamel bond strength of human enamel following the application of the Nd:YAG laser and etching with phosphoric acid. Dental Materials 13 (1997) 51-55
39. Walsh L.J., Abood D., and Brockhurst P.J. Bonding of resin composite to carbon dioxide laser-modified human enamel. Dental Materials 10 (1994) 162-166
40. Advanced technical ceramics. Monolithic ceramics. General and texture properties. Part 4. Determination of surface roughness. The European Standard EN 623-4: 2004.
41. Thompson J.Y., Rapp M.M., and Parker A.J. Microscopic and energy dispersive X-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. Journal of Prosthetic Dentistry 79 (1998) 378-383
42. Söderholm K.-J.M. Correlation of in vivo and in vitro performance of adhesive materials: a report of the ASC MD 156 task group on test methods for adhesion of restorative materials. Dental Materials 7 (1991) 74-83
43. Swift E.J., Perdigao J., and Heymann H.O. Bonding to enamel and dentine: a brief history and state of art. Quintessence International 26 (1995) 95-110
44. Dérand P., and Dérand T. Bond strength of luting cements to zirconium oxide ceramics. International Journal of Prosthodontics 13 (2000) 131-135
45. DeHoff P.H., Annusavice K.J., and Wang Z. Three-dimensional finite element analysis of the shear bond test. Dental Materials 11 (1995) 126-131
46. Großmann J., Emmel A., Schubert E., and Bergmann H.W. Generation of new surface conditions on SiC materials by excimer laser irradiation: mechanisms-properties-applications. Laser und Optoelektronik 26 (1994) 34-39
47. Krasnikov A.S., Sokolova T.N., Mirkin L.I., Krasnikova M.D., and Ermakov N.I. Structure, phase composition and properties of aluminum-oxide ceramic in the laser action zone. Neorganicheskie Materialy 23 (1987) 2069-2073
48. Romanov B.P., and Smirnov S.V. Fracture of brittle materials by continuous laser radiation. Neorganicheskie Materialy 25 (1989) 350-351
49. Ozcan M., Alkumru H.A., and Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to glass-infiltrated alumina ceramic. International Journal of Prosthodontics 14 (2001) 335-339
50. Kern M., and Wegner S. Bonding to zirconia ceramic: adhesion methods and their durability. Dental Materials 14 (1998) 64-71
51. Hummel M., and Kern M. Durability of the resin bond strength to the alumina ceramic Procera. Dental Materials 20 (2004) 498-508
52. Won-suck O., and Shen C. Effect of surface topography on the bond strength of a composite to three different types of ceramic. Journal of Prosthetic Dentistry 90 (2003) 241-246