Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement

Dental Materials

Volumn 26, Issue 8, 2010, Pages 743-750

  Benetti, Paula ^a   Della Bona, Alvaro ^b   Kelly, J Robert ^c  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF PASSO FUNDO   (Brazil)

^c UNIVERSITY OF CONNECTICUT HEALTH CENTER   (United States)

Author keywords

Ceramic; Contact angle; Shear bond strength; Thermal behavior

Indexed keywords

ALL-CERAMIC; AUTOCAD 2006; CERAMIC CONTACT; CERAMIC DISKS; COEFFICIENT OF THERMAL EXPANSION; DENTAL CERAMIC; DIGITAL IMAGE; EXPERIMENTAL GROUPS; FELDSPATHIC CERAMICS; GLASS-INFILTRATED CERAMICS; IDENTICAL CONDITIONS; MEAN VALUES; SHEAR BOND STRENGTH TESTS; SHEAR BOND STRENGTHS; THERMAL BEHAVIORS; THERMAL COMPATIBILITY; THERMAL EXPANSION BEHAVIOR;

ANGLE MEASUREMENT; BOND STRENGTH (MATERIALS); CERAMIC MATERIALS; CONTACT ANGLE; DENTAL MATERIALS; DISKS (MACHINE COMPONENTS); DISKS (STRUCTURAL COMPONENTS); SHEAR STRENGTH; SURFACE ROUGHNESS; THERMAL STRESS; VENEERS; ZIRCONIA;

THERMAL EXPANSION;

ALUMINUM OXIDE; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTURE; DIFFERENTIAL SCANNING CALORIMETRY; ELASTICITY; HEAT; MATERIALS TESTING; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS; VISCOSITY; WETTABILITY;

ALUMINUM OXIDE; DENTAL BONDING; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; DIFFERENTIAL THERMAL ANALYSIS; ELASTICITY; HOT TEMPERATURE; MATERIALS TESTING; SHEAR STRENGTH; SURFACE PROPERTIES; VISCOSITY; WETTABILITY; ZIRCONIUM;

EID: 77953684274     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.03.019     Document Type: Article

References (40)

1. Anusavice K.J. Fracture susceptibility of dental ceramics. Today's FDA Scientific 4 (1992) 1C-3C
2. Della Bona A. Bonding to ceramics: scientific evidences for clinical dentistry (2009), Artes Medicas, São Paulo
3. Kelly J.R., Nishimura I., and Campbell S.D. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 75 (1996) 18-32
4. Özcan M., and Vallitu P.K. Effect of surface conditioning methods on the bond strength of luting cements to ceramics. Dent Mater 19 (2003) 725-731
5. Conrad H.J., Seong W., and Pesun I.J. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 98 (2007) 389-404
6. Al-Dohan H.M., Yaman P., Dennison J.B., Razzoog M.E., and Lang B.R. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 91 (2004) 349-355
7. Studart A.R., Filser F., Kocher P., Lüthy H., and Gauckler L.J. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges. Dent Mater 23 (2007) 115-123
8. Anusavice K.J. Phillips' science of dental materials. 11th ed. (2003), Saunders, St. Louis
9. Callister Jr. W.D. Materials sciences and engineering: an introduction. 5th ed. (2000), John Wiley & Sons, Inc, New York
10. Isgrò G., Kleverlaan C.J., Wang H., and Feilzer A.J. The influence of multiple firing on thermal contraction of ceramic materials used for the fabrication of layered all-ceramic dental restorations. Dent Mater 21 (2005) 557-564
11. Taskonak B., Borges G.A., Mecholsky J.J., Anusavice K.J., Moore B.K., and Yan J. The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic. Dent Mater 24 (2008) 1149-1155
12. Mencík J. Strength and fracture of glass and ceramics: glass science and technology (1992), Elsevier, Amsterdam
13. Smith T.B., Kelly J.R., and Tesk J.A. In vitro fracture behavior of ceramic and metal-ceramic restorations. J Prosthodont 3 (1994) 138-144
14. Aboushelib M.N., Feilzer A.J., and Kleverlaan C.J. Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach. Dent Mater 25 (2009) 383-391
15. Chong K., Chai J., Takahashi Y., and Woziak W. Flexural strength of In-Ceram Alumina and In-Ceram Zirconia core materials. Int J Prosthodont 15 (2002) 183-188
16. Della Bona A., Anusavice K.J., and Dehoff P.H. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dent Mater 19 (2003) 663-669
17. Della Bona A. Characterizing ceramics and interfacial adhesion to resin: I- The relationship of microstructure, composition, properties and fractography. J Appl Oral Sci 13 (2005) 1-9
18. Kelly J.R. Perspectives on strength. Dent Mater 11 (1995) 103-110
19. Oh W., Shen C., Alegre B., and Anusavice K. Wetting characteristic of ceramic to water and adhesive resin. J Prosthet Dent 88 (2002) 616-621
20. Della Bona A. Characterizing ceramics and interfacial adhesion to resin: II- The relationship of surface treatment, bond strength, interfacial toughness and fractography. J Appl Oral Sci 13 (2005) 101-109
21. Della Bona A., Shen C., and Anusavice K.J. Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater 20 (2004) 338-344
22. Boscato N., Della Bona A., and Del Bel Cury A.A. Influence of ceramic pre-treatments on tensile bond strength and mode of failure of resin bonded to ceramics. Am J Dent 20 (2007) 103-108
23. Guess P.C., Kulis A., Witkowski S., Wolkewitz M., Zhang Y., and Strub J.R. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 24 (2008) 1556-1567
24. DeHoff P.H., Anusavice K.J., and Gotzen N. Viscoelastic finite element analysis of an all-ceramic fixed partial denture. J Biomech 39 (2006) 40-48
25. Della Bona A., and Van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res 74 (1995) 1591-1596
26. Madani M., Chu F.C., McDonald A.V., and Smales R.J. Effects of surface treatments on shear bond strengths between a resin cement and an alumina core. J Prosthet Dent 83 (2000) 644-647
27. Aboushelib M.N., Jager N., Kleverlaan C.J., and Feilzer A.J. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 21 (2005) 984-991
28. Phoenix R.D., and Shen C. Characterization of treated porcelain surfaces via dynamic contact angle analysis. Int. J Prosthodont 8 (1995) 187-194
29. Della Bona A., Anusavice K.J., and Shen C. Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2 (2000) 305-313
30. Fleming G.J., El-Lakwahei S.F.A., Harris J.J., and Marquins P.M. The influence of interfacial surface roughness on bilayered dental ceramic specimen performance. Dent Mater 20 (2004) 142-149
31. DeHoff P.H., Barrett A.A., Lee R.B., and Anusavice K.J. Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries. Dent Mater 24 (2008) 744-752
32. Anusavice K.J., Dehoff P.H., Hojjatie B., and Gray A. Influence of tempering and contraction mismatch on crack development in ceramic surfaces. J Dent Res 68 (1989) 1182-1187
33. Dehoff P.H., and Anusavice K.J. Creep functions of dental ceramics measured in a beam-bending viscometer. Dent Mater 20 (2004) 297-304
34. Anusavice K.J., Kakar K., and Ferree N. Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?. Clin Oral Implants Res 18 (2007) 218-231
35. Mackert J.R., Khajotia S.S., Russell C.M., and William A.L. Potential interference of leucite crystallization during porcelain thermal expansion measurement. Dent Mater 12 (1996) 8-12
36. Twiggs S.W., Mackert J.R., Oxford A.L., Ergle J.W., and Lockwood P.E. Isothermal phase transformations of a dental porcelain. Dent Mater 21 (2005) 580-585
37. Mackert J.R., Rueggeberg F.A., Lockwood P.E., Evans A.L., and Thompson W.O. Isothermal anneal effect on microcrack density around leucite particles in dental porcelain. J Dent Res 73 (1994) 1221-1227
38. International Organization for Standardization. ISO 6872: Dental Ceramics. 3 ed. Geneva: International Organization for Standardization, 2008.
39. Fairhurst C.W., Anusavice K.J., Hashinger D.T., Ringle R.D., and Twiggs S.W. Thermal expansion of dental alloys and porcelains. J Biomed Mater Res 14 (1980) 435-446
40. DeHoff P.H., and Anusavice K.J. Viscoelastic finite element stress analysis of the thermal compatibility of dental bilayer ceramic systems. Int J Prosthodont 22 (2009) 56-61