In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials

Journal of Prosthetic Dentistry

Volumn 92, Issue 3, 2004, Pages 265-273

  Piwowarczyk, Andree ^a   Lauer, Hans Christoph ^b   Sorensen, John A ^b  

^a GOETHE UNIVERSITY   (Germany)

^b Pacific Dental Institute

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM OXIDE; CEMENT; DENTAL ALLOY; GLASS IONOMER; LITHIUM DERIVATIVE; ZINC PHOSPHATE;

ANALYSIS OF VARIANCE; ARTICLE; CEMENTATION; COMPOSITE MATERIAL; DEVICE; HIGH TEMPERATURE; IN VITRO STUDY; LOW TEMPERATURE; MECHANICAL STRESS; PRESSURE MEASUREMENT; SHEAR STRENGTH; STATISTICAL ANALYSIS; SURFACE PROPERTY; TEMPERATURE DEPENDENCE; THERMODYNAMICS; THERMOSTABILITY; TOOTH PROSTHESIS;

ACID ETCHING, DENTAL; AIR ABRASION, DENTAL; ALUMINUM OXIDE; ANALYSIS OF VARIANCE; DENTAL BONDING; DENTAL CASTING INVESTMENT; DENTAL CEMENTS; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL PROSTHESIS; DENTAL STRESS ANALYSIS; GLASS IONOMER CEMENTS; GOLD ALLOYS; HUMANS; HYDROFLUORIC ACID; MATCHED-PAIR ANALYSIS; MATERIALS TESTING; RESIN CEMENTS; SHEAR STRENGTH; SILANES; ZINC PHOSPHATE CEMENT;

EID: 4444297012     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2004.06.027     Document Type: Article

References (30)

1. R.W. Phillips, M.L. Swartz, M.S. Lund, B.K. Moore, and J. Vickery In vivo disintegration of luting cements J Am Dent Assoc 114 1987 489 492
2. A.M. Diaz-Arnold, M.A. Vargas, and D.R. Haselton Current status of luting agents for fixed prosthodontics J Prosthet Dent 81 1999 135 141
3. B.L. Muzynski, E. Greener, L. Jameson, and W.F. Malone Fluoride release from glass ionomers used as luting agents J Prosthet Dent 60 1988 41 44
4. R.G. Craig, and J.M. Powers Restorative dental materials 11th ed. 2001 Elsevier St Louis p. 53-4
5. D.R. Powis, T. Folleras, S.A. Merson, and A.D. Wilson Improved adhesion of a glass ionomer cement to dentin and enamel J Dent Res 61 1982 1416 1422
6. S.R. Curtis, M.W. Richards, and J.C. Meiers Early erosion of glass ionomer cement at crown margins Int J Prosthodont 6 1993 553 557
7. J.O. Burgess, N. Barghi, D.C. Chan, and T. Hummert A comparative study of three glass ionomer base materials Am J Dent 6 1993 137 141
8. S.N. White, and Z. Yu Physical properties of fixed prosthodontic, resin composite luting agents Int J Prosthodont 6 1993 384 389
9. W. Kanchanavasita, H.M. Anstice, and G.J. Pearson Water sorption characteristics of resin-modified glass ionomer cements Biomaterials 18 1997 343 349
10. Z.C. Li, and S.N. White Mechanical properties of dental luting cements J Prosthet Dent 81 1999 597 609
11. N. Nakabayashi, K. Kojima, and E. Masuhara The promotion of adhesion by the infiltration of monomers into tooth substrates J Biomed Mater Res 16 1982 265 273
12. A.D. Peters, and J.C. Meiers Effect of polymerization mode of a dual-cured resin cement on time-dependent shear bond strength to porcelain Am J Dent 9 1996 264 268
13. S. Bouillaguet, M. Degrange, M. Cattani, C. Godin, and J.M. Meyer Bonding to dentin achieved by general practitioners Schweiz Monatsschr Zahnmed 112 2002 1006 1011
14. A. Piwowarczyk, and H.C. Lauer Mechanical properties of luting cements after water storage Oper Dent 28 2003 535 542
15. P. Milleding, U. Ortengren, and S. Karlsson Ceramic inlay systems: some clinical aspects J Oral Rehabil 22 1995 571 580
16. F.J. Burke The effect of variations in bonding procedure on fracture resistance of dentin-bonded all-ceramic crowns Quintessence Int 26 1995 293 300
17. H. Matsumura, H. Yanagida, N. Tanoue, M. Atsuta, and S. Shimoe Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations J Prosthet Dent 86 2001 315 319
18. K. Yoshida, K. Kamada, T. Sawase, and M. Atsuta Effect of 3 adhesive primers for a noble metal on the shear bond strengths of three resin cements J Oral Rehabil 28 2001 14 19
19. M. Antoniadou, M. Kern, and J.R. Strub Effect of a new metal primer on the bond strength between a resin cement and two high-noble alloys J Prosthet Dent 84 2000 554 560
20. D.S. Cobb, M.A. Vargas, T.A. Fridrich, and M.R. Bouschlicher Metal surface treatment: characterization and effect on composite-to-metal bond strength Oper Dent 25 2000 427 433
21. P. Mojon, E.B. Hawbolt, M.I. MacEntee, and P.H. Ma Early bond strength of luting cements to a precious alloy J Dent Res 71 1992 1633 1639
22. W. Awliya, A. Oden, P. Yaman, J.B. Dennison, and M.E. Razzoog Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions Acta Odontol Scand 56 1998 9 13
23. R. Friederich, and M. Kern Resin bond strength to densely sintered alumina ceramic Int J Prosthodont 15 2002 333 338
24. M. Madani, F.C. Chu, A.V. McDonald, and R.J. Smales Effects of surface treatments on shearbond strengths between a resin cement and an alumina core J Prosthet Dent 83 2000 644 647
25. D. Sen, E. Poyrazoglu, B. Tuncelli, and G. Goller Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores J Prosthet Dent 83 2000 210 215
26. M. Blixt, E. Adamczak, L.A. Linden, A. Oden, and K. Arvidson Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shearbond strength of luting cements Int J Prosthodont 13 2000 221 226
27. D. Estafan, F. Dussetschleger, A. Estafan, and W. Jia Effect of prebonding procedures on shear bond strength of resin composite to pressable ceramic Gen Dent 48 2000 412 416
28. A. Della Bona, K.J. Anusavice, and C. Shen Microtensile strength of composite bonded to hot-pressed ceramics J Adhes Dent 2 2000 305 313
29. J.W. Thurmond, W.W. Barkmeier, and T.M. Wilwerding Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain J Prosthet Dent 72 1994 355 359
30. I. Stangel, D. Nathanson, and C.S. Hsu Shear strength of the composite bond to etched porcelain J Dent Res 66 1987 1460 1465