Dentin bond strengths of four adhesion strategies after thermal fatigue and 6-month water storage

Journal of Esthetic and Restorative Dentistry

Volumn 24, Issue 5, 2012, Pages 345-355

  Sezinando, Ana ^a,b   Perdigão, Jorge ^c   Regalheiro, Rita ^a  

^a INSTITUTO SUPERIOR DE CIÊNCIAS DA SAÚDE EGAS MONIZ   (Portugal)

^b UNIVERSIDAD REY JUAN CARLOS   (Spain)

^c UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DENTIN BONDING AGENT; RESIN CEMENT; WATER;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL ETCHING; DENTAL PROCEDURE; DENTIN; DRUG EFFECT; HUMAN; LABORATORY DIAGNOSIS; LONGITUDINAL STUDY; METHODOLOGY; TEMPERATURE; TIME;

DENTAL BONDING; DENTAL ETCHING; DENTAL STRESS ANALYSIS; DENTIN; DENTIN-BONDING AGENTS; HUMANS; LONGITUDINAL STUDIES; RESIN CEMENTS; SPECIMEN HANDLING; TEMPERATURE; TIME FACTORS; WATER;

EID: 84867057984     PISSN: 14964155     EISSN: 17088240     Source Type: Journal    
DOI: 10.1111/j.1708-8240.2012.00531.x     Document Type: Article

References (67)

1. Van Meerbeek B, De Munck J, Yoshida Y, et al,. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003; 28: 215-35.
2. Armstrong SR, Vargas MA, Fang Q, Laffoon JE,. Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 2003; 5: 47-56.
3. Peumans M, Kanumilli P, De Munck J, et al,. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater 2005; 21: 864-81.
4. Platt JA, Almeida J, Gonzalez-Cabezas C, et al,. The effect of double adhesive application on the shear bond strength to dentin of compomers using three one-bottle adhesive systems. Oper Dent 2001; 26: 313-17.
5. Tay FR, Frankenberger R, Krejci I, et al,. Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence. J Dent 2004; 32: 611-21.
6. Christensen GC,. Bonding agents: is convenience overriding strength ? Clin Report 2010; 3 (6): 1-3.
7. Van Landuyt KL, Mine A, De Munck J, et al,. Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives. J Adhes Dent 2009; 11: 175-90.
8. Reis A, Albuquerque M, Pegoraro M, et al,. Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin? J Dent 2008; 36: 309-15.
9. Reis A, Leite TM, Matte K, et al,. Improving clinical retention of one-step self-etching adhesive systems with an additional hydrophobic adhesive layer. J Am Dent Assoc 2009; 140: 877-85.
10. Pashley DH, Tay FR,. Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater 2001; 17: 430-44.
11. Gale MS, Darvell BW,. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999; 27: 89-99.
12. De Munck J, Van Landuyt KV, Peumans M, et al,. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005; 84: 118-32.
13. Pashley DH, Tao L, Boyd L, et al,. Scanning electron microscopy of the substructure of smear layers in human dentine. Arch Oral Biol 1988; 33: 265-70.
14. Burrow MF, Satoh M, Tagami J,. Dentin bond durability after three years using a dentin bonding agent with and without priming. Dent Mater 1996; 12: 302-7.
15. International Organization for Standardization. ISO/TS 11405 dental materials-testing of adhesion to tooth structure. Geneva, Switzerland: WHO; 2003.
16. Skovron L, Kogeo D, Gordillo LAA, et al,. Effects of immersion time and frequency of water exchange on durability of etch-and-rinse adhesive. J Biomed Mater Res B Appl Biomater 2010; 95: 339-46.
17. Perdigao J, Geraldeli S, Carmo ARP, Dutra HR,. In vivo influence of residual moisture on microtensile bond strengths of one-bottle adhesives. J Esthet Restor Dent 2002; 14: 31-8.
18. McLean JW, Kramer IRH,. A clinical and pathological evaluation of a sulphinic acid activated resin for use in restorative dentistry. Br Dent J 1952; 93: 255-69.
19. Kramer IRH,. Alterations in the staining reactions of dentin resulting from a constituent of a new self-polymerising resin. Br Dent J 1952; 93: 150-52.
20. Buonocore M, Wileman W, Brudevold F,. A report on a resin composition capable of bonding to human dentin surfaces. J Dent Res 1956; 35: 846-51.
21. Pashley DH, Ciucchi B, Sano H, et al,. Bond strength versus dentine structure: a modelling approach. Arch Oral Biol 1995; 40: 1109-18.
22. Gwinnett AJ,. Quantitative contribution of resin infiltration/ hybridization to dentin bonding. Am J Dent 1993; 6: 7-9.
23. Yoshihara K, Yoshida Y, Nagaoka N, et al,. Nano-controlled molecular interaction at adhesive interfaces for hard tissue reconstruction. Acta Biomater 2010; 6: 3573-82.
24. Yoshihara K, Yoshida Y, Hayakawa S, et al,. Self-etch monomer-calcium salt deposition on dentin. J Dent Res 2011; 90: 602-06.
25. Loguercio AD, Uceda-Gomez N, Carrilho MRO, Reis A,. Influence of specimen size and regional variation on long-term resin-dentin bond strength. Dent Mater 2005; 21: 224-31.
26. De Munck J, Mine A, Cardoso MV, et al,. Effect of dentin location and long-term water storage on bonding effectiveness of dentin adhesives. Dent Mater J 2011; 30: 7-13.
27. De Munck J, Van Landuyt K, Coutinho E, et al,. Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling. Dent Mater 2005; 21: 999-1007.
28. Heintze SD, Thunpithayakul C, Armstrong SR, Rousson V,. Correlation between microtensile bond strength data and clinical outcome of Class V restorations. Dent Mater 2011; 27: 114-25.
29. Fontes ST, Cubas GB, Flores JB, et al,. Resin-dentin bond strength of 10 contemporary etch-and-rinse adhesive systems after one year of water storage. Gen Dent 2010; 58: e257-61.
30. Ye Q, Spencer P, Wang Y, Misra A,. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. J Biomed Mater Res A 2007; 80: 342-50.
31. Poitevin A, De Munck J, Van Landuyt K, et al,. Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin. J Adhes Dent 2008; 10: 7-16.
32. Peumans M, De Munck J, Van Landuyt KL, et al,. A 13-year clinical evaluation of two three-step etch-and-rinse adhesives in non-carious Class-V lesions. Clin Oral Investig 2012; 16: 129-37.
33. Sadek FT, Goracci C, Cardoso PEC, et al,. Microtensile bond strength of current dentin adhesives measured immediately and 24 hours after application. J Adhes Dent 2005; 7: 297-302.
34. Sano H, Shono T, Sonoda H, et al,. Relationship between surface area for adhesion and tensile bond strength- evaluation of a micro-tensile bond test. Dent Mater 1994; 10: 236-40.
35. Teixeira CS, Chain MC,. Evaluation of shear bond strength between self-etching adhesive systems and dentin and analysis of the resin-dentin interface. Gen Dent 2010; 58: e52-e61.
36. Okada H, Sadr A, Shimada Y, Tagami J,. Micro-shear bond strength of current one-step adhesives to cementum and dentin. Am J Dent 2009; 22: 259-63.
37. Iida Y, Nikaido T, Kitayama S, et al,. Evaluation of dentin bonding performance and acid-base resistance of the interface of two-step self-etching adhesive systems. Dent Mater J 2009; 28: 493-500.
38. Sarr M, Kane AW, Vreven J, et al,. Microtensile bond strength and interfacial characterization of 11 contemporary adhesives bonded to bur-cut dentin. Oper Dent 2010; 35: 94-104.
39. Garcia FCP, Almeida JCF, Osorio R, et al,. Influence of drying time and temperature on bond strength of contemporary adhesives to dentine. J Dent 2009; 37: 315-20.
40. Peumans M, De Munck J, Van Landuyt KL, et al,. Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater 2010; 26: 1176-84.
41. Ritter AV, Swift EJ, Heymann HO, et al,. An eight-year clinical evaluation of filled and unfilled one-bottle dental adhesives. J Am Dent Assoc 2009; 140: 28-37.
42. Lopes GC, Perdigao J, Lopes Mde F, et al,. Dentin bond strengths of simplified adhesives: effect of dentin depth. Compend Contin Educ Dent 2006; 27: 340-45.
43. Miyazaki M, Sat M, Onose H, Moore BK,. Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent 1998; 11: 118-22.
44. Giannini M, Seixas CA, Reis AF, Pimenta LA,. Six-month storage-time evaluation of one-bottle adhesive systems to dentin. J Esthet Restor Dent 2003; 15: 43-8; discussion 49.
45. De Munck J, Van Meerbeek B, Yoshida Y, et al,. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 2003; 82: 136-40.
46. Walter R, Swift EJ, Boushell LW, Braswell K,. Enamel and dentin bond strengths of a new self-etch adhesive system. J Esthet Restor Dent 2011; 23: 390-6.
47. Campillo-Funollet M, Qian X, Munoz-Viveros C,. Shear bond strength of current self-etch adhesives. J Dent Res 2011; 90 (Spec Iss A): Abstract #2463. Available at: http://www.dentalresearch.org (accessed July 28, 2011).
48. Bui H, Qian X, Tobia D,. Bond durability of OptiBond XTR self-etch adhesive system. J Dent Res 2011; 90 (Spec Iss A): Abstract #1102. Available at: http://www.dentalresearch.org (accessed July 28, 2011).
49. Van Landuyt KL, Kanumilli P, De Munck J, et al,. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent 2006; 34: 77-85.
50. Hashimoto M, Fujita S, Nagano F, et al,. Ten-years degradation of resin-dentin bonds. Eur J Oral Sci 2010; 118: 404-10.
51. Van Meerbeek B, Yoshihara K, Yoshida Y, et al,. State of the art of self-etch adhesives. Dent Mater 2011; 27: 17-28.
52. Nishitani Y, Yoshiyama M, Wadgaonkar B, et al,. Activation of gelatinolytic/collagenolytic activity in dentin by self-etching adhesives. Eur J Oral Sci 2006; 114: 160-66.
53. Van Landuyt KL, Snauwaert J, De Munck J, et al,. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 2007; 28: 3757-85.
54. Van Landuyt KL, Yoshida Y, Hirata I, et al,. Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res 2008; 87: 757-61.
55. Fukegawa D, Hayakawa S, Yoshida Y, et al,. Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res 2006; 85: 941-44.
56. Qian X, Nguyen TD, Bui H, Tobia D,. SEM morphological characterization of OptiBond XTR adhesive system. J Dent Res 2011; 90 (Spec Iss A): Abstract #1101. Available at: http://www.dentalresearch.org (accessed July 28, 2011).
57. Tay FR, Gwinnett AJ, Pang KM, Wei SHY,. Micromorphologic relationship of the resin-dentin interface following a total-etch technique in vivo using a dentinal bonding system. Quintessence Int 1995; 26: 63-70.
58. Kenshima S, Francci C, Reis A, et al,. Conditioning effect on dentin, resin tags and hybrid layer of different acidity self-etch adhesives applied to thick and thin smear layer. J Dent 2006; 34: 775-83.
59. Lohbauer U, Nikolaenko SA, Petschelt A, Frankenberger R,. Resin tags do not contribute to dentin adhesion in self-etching adhesives. J Adhes Dent 2008; 10: 97-103.
60. Adebayo OA, Burrow MF, Tyas MJ,. Bonding of one-step and two-step self-etching primer adhesives to dentin with different tubule orientations. Acta Odontol Scand 2008; 66: 159-68.
61. Kimmes NS, Barkmeier WW, Erickson RL, Latta MA,. Adhesive bond strengths to enamel and dentin using recommended and extended treatment times. Oper Dent 2010; 35: 112-19.
62. Moll K, Fritzenschaft A, Haller B,. In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 2004; 35: 845-52.
63. Itoh S, Nakajima M, Hosaka K, et al,. Dentin bond durability and water sorption/solubility of one-step self-etch adhesives. Dent Mater J 2010; 29: 623-30.
64. Yiu CK, King NM, Pashley DH, et al,. Effect of resin hydrophilicity and water storage on resin strength. Biomaterials 2004; 25: 5789-96.
65. Malacarne J, Carvalho RM, de Goes MF, et al,. Water sorption/solubility of dental adhesive resins. Dent Mater 2006; 22: 973-80.
66. Brackett WW, Ito S, Tay FR, et al,. Microtensile dentin bond strength of self-etching resins: effect of a hydrophobic layer. Oper Dent 2005; 30: 733-8.
67. Perdigao J, Gomes G, Sezinando A,. Bonding ability of three ethanol-based adhesives after thermal fatigue. Am J Dent 2011; 24: 159-64.