Toward bulk heterojunction polymer solar cells with thermally stable active layer morphology

Journal of Photonics for Energy

Volumn 4, Issue 1, 2014, Pages

  Cardinaletti, Ilaria ^a   Kesters, Jurgen ^a   Bertho, Sabine ^a   Conings, Bert ^a   Piersimoni, Fortunato ^b   D'Haen, Jan ^a   Lutsen, Laurence ^c   Nesladek, Milos ^a   Van Mele, Bruno ^d   Van Assche, Guy ^d   Vandewal, Koen ^e   Salleo, Alberto ^f   Vanderzande, Dirk ^a,c   Maes, Wouter ^a,c   Manca, Jean V ^a,c  

^a HASSELT UNIVERSITY   (Belgium)

^b UNIVERSITY OF POTSDAM   (Germany)

^c IMEC   (Belgium)

^d VRIJE UNIVERSITEIT BRUSSEL   (Belgium)

^e DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^f Stanford University   (United States)

Author keywords

bulk heterojunction; lifetime.; organic photovoltaics; phase separation; thermal stability

Indexed keywords

DEGRADATION; HETEROJUNCTIONS; MORPHOLOGY; PHASE SEPARATION; THERMOANALYSIS; THERMODYNAMIC STABILITY;

BULK HETEROJUNCTION; BULK HETEROJUNCTION ORGANIC SOLAR CELLS; BULK HETEROJUNCTION SOLAR CELLS; HIGH-GLASS TRANSITION TEMPERATURES; LIFETIME; ORGANIC PHOTOVOLTAICS; PHOTOVOLTAIC PERFORMANCE; STABILIZATION EFFECTS;

SOLAR CELLS;

EID: 84905860739     PISSN: None     EISSN: 19477988     Source Type: Journal    
DOI: 10.1117/1.JPE.4.040997     Document Type: Review

References (73)

1. "Neuber products," http://www.energy-sunbags.de (28 February 2014).
2. L. Dou et al., "25th anniversary article: a decade of organic/polymeric photovoltaic research," Adv. Mater. 25(46), 6642-6671 (2013), http://dx.doi.org/10.1002/adma.v25.46.
3. C. H. Peters et al., "High efficiency polymer solar cells with long operating lifetimes," Adv. Energy Mater. 1(4), 491-494 (2011), http://dx.doi.org/10.1002/aenm.201100138.
4. M. O. Reese et al., "Consensus stability testing protocols for organic photovoltaic materials and devices," Sol. Energy Mater. Sol. Cells 95(5), 1253-1267 (2011), http://dx.doi.org/10 .1016/j.solmat.2011.01.036.
5. J. U. Lee et al., "Degradation and stability of polymer-based solar cells," J. Mater. Chem. 22(46), 24265-24283 (2012), http://dx.doi.org/10. 1039/c2jm33645f.
6. N. Grossiord et al., "Degradation mechanisms in organic photovoltaic devices," Org. Electron. 13(3), 432-456 (2012), http://dx.doi.org/10.1016/ j.orgel.2011.11.027.
7. M. Jørgensen et al., "Stability of polymer solar cells," Adv. Mater. 24(5), 580-612 (2012), http://dx.doi.org/10.1002/adma.201104187.
8. E. Voroshazi et al., "Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells," Org. Electron. 12(5), 736-744 (2011), http://dx.doi.org/10.1016/j .orgel.2011.01.025.
9. S. Bertho et al., "Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells," Sol. Energy Mater. Sol. Cells 91(5), 385-389 (2007), http://dx.doi.org/10.1016/j.solmat.2006.10.008. (Pubitemid 46149269)
10. A. Seemann et al., "Reversible and irreversible degradation of organic solar cell performance by oxygen," Sol. Energy 85(6), 1238-1249 (2011), http://dx.doi.org/10.1016/j .solener.2010.09.007.
11. R. Steim, F. R. Kogler, and C. J. Brabec, "Interface materials for organic solar cells," J. Mater. Chem. 20(13), 2499-2512 (2010), http://dx.doi.org/10.1039/b921624c.
12. E. Voroshazi et al., "Role of electron and hole collecting buffer layers on the stability of inverted polymer: fullerene photovoltaic devices," J. Photovoltaics 4(1), 265-270 (2014), http://dx.doi.org/10.1109/ JPHOTOV.2013.2287913.
13. K. Kawano and C. Adachi, "Evaluating carrier accumulation in degraded bulk heterojunction organic solar cells by a thermally stimulated current technique," Adv. Funct. Mater. 19(24), 3934-3940 (2009), http://dx.doi.org/10.1002/(ISSN)1616-3028.
14. P. Kumar and S. Chand, "Recent progress and future aspects of organic solar cells," Prog. Photovolt: Res. Appl. 20(4), 377-415 (2012), http://dx.doi.org/10.1002/pip.v20.4.
15. C. J. Brabec et al., "Polymer-fullerene bulk-heterojunction solar cells," Adv. Mater. 22(34), 3839-3856 (2010), http://dx.doi.org/10.1002/ adma.200903697.
16. F. C. Krebs, Stability and Degradation of Organic and Polymer Solar Cells, Chapter 1, John Wiley & Sons, Chichester, West Sussex, United Kingdom (2012).
17. B. Conings et al., "Modeling the temperature induced degradation kinetics of the short circuit current in organic bulk heterojunction solar cells," Appl. Phys. Lett. 96(16), 163301 (2010), http://dx.doi.org/10.1063/ 1.3391669.
18. F. Demir et al., "Isothermal crystallization of P3HT: PCBM blends studied by RHC," J. Therm. Anal. Calorim. 105(3), 845-849 (2011), http://dx.doi.org/10.1007/s10973-011-1701-8.
19. O. Oklobia and T. S. Shafai, "A quantitative study of the formation of PCBM clusters upon thermal annealing of P3HT/PCBM bulk heterojunction solar cell," Sol. Energy Mater. Sol. Cells 117, 1-8 (2013), http://dx.doi.org/10. 1016/j.solmat.2013.05.011.
20. F. Piersimoni et al., "Influence of fullerene photodimerization on the PCBM crystallization in polymer: fullerene bulk heterojunctions under thermal stress," J. Polym. Sci. B Polym. Phys. 51(16), 1209-1214 (2013), http://dx.doi.org/10.1002/polb.v51.16.
21. S.Kouijzer et al., "Predicting morphologies of solution processed polymer: fullerene blends," J. Am. Chem. Soc. 135(32), 12057-12067 (2013), http://dx.doi.org/10.1021/ja405493j.
22. S. Desbief et al., "Nanoscale investigation of the electrical properties in semiconductor polymer-carbon nanotube hybrid materials," Nanoscale 4(8), 2705-2712 (2012), http://dx.doi.org/10.1039/c2nr11888b.
23. X. Yan and A. Uddin, "Effect of thermal annealing on P3HT: PCBM bulk-heterojunction organic solar cells: a critical review," Renewable Sustainable Energy Rev. 30, 324-336 (2014), http://dx.doi.org/10.1016/j.rser. 2013.10.025.
24. J. A. Moore, S. Ali, and B. C. Berry, "Stabilization of PCBM domains in bulk heterojunctions using polystyrene-tethered fullerene," Sol. Energy Mater. Sol. Cells 118, 96-101 (2013), http://dx.doi.org/10.1016/j.solmat.2013. 07.044.
25. B. V. Andersson et al., "Imaging of the 3D nanostructure of a polymer solar cell by electron tomography," Nano Lett. 9(2), 853-855 (2009), http://dx.doi.org/10.1021/nl803676e.
26. S. Bertho et al., "Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells," Sol. Energy Mater. Sol. Cells 92(7), 753-760 (2008), http://dx.doi.org/10.1016/j.solmat.2008.01.006.
27. F. Liu et al., "Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics," Prog. Polym. Sci. 38(12), 1990-2052 (2013), http://dx.doi.org/10 .1016/j.progpolymsci.2013. 07.010.
28. P. A. Staniec et al., "The nanoscale morphology of a PCDTBT: PCBM photovoltaic blend," Adv. Energy Mater. 1(4), 499-504 (2011), http://dx.doi.org/10.1002/aenm.201100144.
29. P. Veerender et al., "Probing the annealing induced molecular ordering in bulk heterojunction polymer solar cells using in-situ Raman spectroscopy," Sol. Energy Mater. Sol. Cells 120, 526-535 (2014), http://dx.doi.org/10.1016/j.solmat.2013.09.034.
30. L. Chang et al., "Correlating dilute solvent interactions to morphology and OPV device performance," Org. Electron. 14(10), 2431-2443 (2013), http://dx.doi.org/10.1016/j .orgel.2013.06.016.
31. C. Müller et al., "Binary organic photovoltaic blends: a simple rationale for optimum compositions," Adv. Mater. 20(18), 3510-3515 (2008), http://dx.doi.org/10.1002/adma .200800963.
32. J. Zhao et al., "Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology," J. Phys. Chem. B 113(6), 1587-1591 (2009), http://dx.doi.org/10.1021/jp804151a.
33. C. Nicolet et al., "Optimization of the bulk heterojunction composition for enhanced photovoltaic properties: correlation between the molecular weight of the semiconducting polymer and device performance," J. Phys. Chem. B 115(44), 12717-12727 (2011), http://dx.doi.org/10.1021/jp207669j.
34. N. Li et al., "Determination of phase diagrams of binary and ternary organic semiconductor blends for organic photovoltaic devices," Sol. Energy Mater. Sol. Cells 95(12), 3465-3471 (2011), http://dx.doi.org/10.1016/j. solmat.2011.08.005.
35. A. A. Y. Guilbert et al., "Effect of multiple adduct fullerenes on microstructure and phase behavior of P3HT: fullerene blend films for organic solar cells," ACS Nano 6(5), 3868-3875 (2012), http://dx.doi.org/10.1021/ nn204996w.
36. R. Noriega et al., "A general relationship between disorder, aggregation and charge transport in conjugated polymers," Nat. Mater. 12(11), 1037-1043 (2013), http://dx.doi.org/10.1038/nmat3722.
37. T. Wang et al., "Correlating structure with function in thermally annealed PCDTBT: PC 70 BM photovoltaic blends," Adv. Funct. Mater. 22(7), 1399-1408 (2012), http://dx.doi.org/10 .1002/adfm.v22.7.
38. C. J. Schaffer et al., "A direct evidence of morphological degradation on a nanometer scale in polymer solar cells," Adv. Mater. 25(46), 6760-6764 (2013), http://dx.doi.org/10.1002/adma.v25.46.
39. B. Ray and M. A. Alam, "A compact physical model for morphology induced intrinsic degradation of organic bulk heterojunction solar cell," Appl. Phys. Lett. 99(3), 033303 (2011), http://dx.doi.org/10.1063/1.3610460.
40. F. Piersimoni et al., "Influence of fullerene ordering on the energy of the charge-transfer state and open-circuit voltage in polymer: fullerene solar cells," J. Phys. Chem. C 115(21), 10873-10880 (2011), http://dx.doi.org/10.1021/jp110982m.
41. K. Vandewal et al., "The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in polymer: fullerene bulk heterojunction solar cells," Adv. Funct. Mater. 18(14), 2064-2070 (2008), http://dx.doi.org/10.1002/adfm .v18:14.
42. K. Tvingstedt et al., "Electroluminescence from charge transfer states in polymer solar cells," J. Am. Chem. Soc. 131(33), 11819-11824 (2009), http://dx.doi.org/10.1021/ja903100p.
43. M. Hallermann, S. Haneder, and E. Da Como, "Charge-transfer states in conjugated polymer/fullerene blends: below-gap weakly bound excitons for polymer photovoltaics," Appl. Phys. Lett. 93(5), 053307 (2008), http://dx.doi.org/10.1063/1.2969295.
44. K. Vandewal et al., "Relating the open-circuit voltage to interface molecular properties of donor: acceptor bulk heterojunction solar cells," Phys. Rev. B 81(12), 12520 (2010), http://dx.doi.org/10.1103/PhysRevB.81.125204.
45. K. Vandewal et al., "Fourier-transform photocurrent spectroscopy for a fast and highly sensitive spectral characterization of organic and hybrid solar cells," Thin Solid Films 516(20), 7135-7138 (2008), http://dx.doi.org/10.1016/j.tsf.2007.12.056.
46. L. Goris et al., "Observation of the subgap optical absorption in polymer-fullerene blend solar cells," Appl. Phys. Lett. 88(5), 052113 (2006), http://dx.doi.org/10.1063/1.2171492.
47. B. P. Rand, D. P. Burk, and S. R. Forrest, "Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells," Phys. Rev. B 75(11), 115327 (2007), http://dx.doi.org/10.1103/PhysRevB.75.115327.
48. K. Vandewal, S. Himmelberger, and A. Salleo, "Structural factors that affect the performance of organic bulk heterojunction solar cells," Macromolecules 46(16), 6379-6387 (2013), http://dx.doi.org/10.1021/ma400924b.
49. B. Ray and M. A. Alam, "Random vs regularized OPV: limits of performance gain of organic bulk heterojunction solar cells by morphology engineering," Sol. Energy Mater. Sol. Cells 99, 204-212 (2012), http://dx.doi.org/10.1016/j.solmat.2011.11.042.
50. J. Oh and G. TamizhMani, "Temperature testing and analysis of PV modules per UL 1703 and IEC 61730 standards," in 35th IEEE Photovoltaics Specialists Conf., pp. 000984-000988 (2010).
51. S. Bertho et al., "Improved thermal stability of bulk heterojunctions based on side-chain functionalized poly(3-alkylthiophene) copolymers and PCBM," Sol. Energy Mater. Sol. Cells 110, 69-76 (2013), http://dx.doi.org/10.1016/j.solmat.2012.12.007.
52. S. Alem et al., "Effect of mixed solvents on PCDTBT: PC70BM based solar cells," Org. Electron. 12(11), 1788-1793 (2011), http://dx.doi.org/ 10.1016/j.orgel.2011.07.011.
53. S. Cho et al., "A thermally stable semiconducting polymer," Adv. Mater. 22(11), 1253-1257 (2010), http://dx.doi.org/10.1002/adma.v22:11.
54. B. Gholamkhass and P. Servati, "Solvent-vapor induced morphology reconstruction for efficient PCDTBT based polymer solar cells," Org. Electron. 14(9), 2278-2283 (2013), http://dx.doi.org/10.1016/j.orgel.2013.05. 014.
55. T. Wang, A. J. Pearson, and D. G. Lidzey, "Correlating molecular morphology with optoelectronic function in solar cells based on low band-gap copolymer: fullerene blends," J. Mater. Chem. C 1(44), 7266-7293 (2013), http://dx.doi.org/10.1039/c3tc31235f.
56. W. R. Mateker et al., "Improving the long-term stability of PBDTTPD polymer solar cells through material purification aimed at removing organic impurities," Energy Environ. Sci. 6(8), 2529-2537 (2013), http://dx.doi.org/10.1039/c3ee41328d.
57. K. Sivula et al., "Amphiphilic diblock copolymer compatibilizers and their effect on the morphology and performance of polythiophene: fullerene solar cells," Adv. Mater. 18(2), 206-210 (2006), http://dx.doi.org/10.1002/ (ISSN)1521-4095. (Pubitemid 43133393)
58. S. Ebadian et al., "Effects of annealing and degradation on regioregular polythiophenebased bulk heterojunction organic photovoltaic devices," Sol. Energy Mater. Sol. Cells 94(12), 2258-2264 (2010), http://dx.doi.org/10.1016/j.solmat.2010.07.021.
59. E. Bundgaard et al., "Advanced functional polymers for increasing the stability of organic photovoltaics," Macromol. Chem. Phys. 214(14), 1546-1558 (2013), http://dx.doi.org/10 .1002/macp.v214.14.
60. J. Vandenbergh et al., "Thermal stability of poly[2-methoxy-5-(20- phenylethoxy)-1,4-phenylenevinylene] (MPE-PPV): fullerene bulk heterojunction solar cells," Macromolecules 44(21), 8470-8478 (2011), http://dx.doi.org/ 10.1021/ma201911a.
61. T. Lei, J.-Y. Wang, and J. Pei, "Roles of flexible chains in organic semiconducting materials," Chem. Mater. 26(1), 594-603 (2014), http://dx.doi.org/10.1021/cm4018776.
62. B. J. Campo et al., "Ester-functionalized poly(3-alkylthiophene) copolymers: synthesis, physicochemical characterization and performance in bulk heterojunction organic solar cells," Org. Electron. 14(2), 523-534 (2013), http://dx.doi.org/10.1016/j.orgel.2012.11.021
63. D. M. Tanenbaum et al., "The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices," RCS Adv. 2(3), 882-893 (2012), http://dx.doi .org/10.1039/c1ra00686j.
64. B. Andreasen et al., "TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices-the ISOS-3 inter-laboratory collaboration," Phys. Chem. Chem. Phys. 14(33), 11780-11799 (2012), http://dx.doi.org/10.1039/c2cp41787a.
65. G. Teran-Escobar et al., "On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses-the ISOS-3 inter-laboratory collaboration," Phys. Chem. Chem. Phys. 14(33), 11824-11845 (2012), http://dx.doi.org/10.1039/c2cp40821j.
66. J. Kesters et al., "Enhanced intrinsic stability of the bulk heterojunction active layer blend of polymer solar cells by varying the polymer side chain pattern," Org. Electron. 15(2), 549-562 (2014), http://dx.doi.org/10.1016/j.orgel.2013.12.006.
67. P. R. T. Boudreault, A. Najari, and M. Leclerc, "Processable low-bandgap polymers for photovoltaic applications," Chem. Mater. 23(3), 456-469 (2011), http://dx.doi.org/10 .1021/cm1021855.
68. J. E. Carlé et al., "Comparative studies of photochemical cross-linking methods for stabilizing," J. Mater. Chem. 22(46), 24417 (2012), http://dx.doi.org/10.1039/c2jm34284g.
69. C.-Y. Chang et al., "Enhanced performance and stability of a polymer solar cell by incorporation of vertically aligned, cross-linked fullerene nanorods," Angew. Chem. 50(40), 9386-9390 (2011), http://dx.doi.org/10. 1002/anie.v50.40.
70. S.-O. Kim et al., "Thermally stable organic bulk heterojunction photovoltaic cells," Sol. Energy Mater. Sol. Cells 95(2), 432-439 (2011), http://dx.doi.org/10.1016/j.solmat .2010.08.009.
71. M.-H. Liao et al., "Morphological stabilization by supramolecular perfluorophenyl-C 60 interactions leading to efficient and thermally stable organic photovoltaics," Adv. Funct. Mater. 24(10), 1418-1429 (2013), http://dx.doi.org/10.1002/adfm.201300437.
72. Z. Li et al., "Performance enhancement of fullerene-based solar cells by light processing," Nat. Commun. 4, 2227 (2013), http://dx.doi.org/10.1038/ncomms3227.
73. A. Distler et al., "The effect of PCBM dimerization on the performance of bulk heterojunction solar cells," Adv. Energy Mater. 4(4), 1300693 (2014), http://dx.doi.org/10.1002/aenm .201400171.