Performance enhancement of fullerene-based solar cells by light processing

Nature Communications

Volumn 4, Issue , 2013, Pages

  Li, Zhe ^a   Wong, Him Cheng ^a   Huang, Zhenggang ^a   Zhong, Hongliang ^a   Tan, Ching Hong ^a   Tsoi, Wing Chung ^a   Kim, Ji Seon ^a   Durrant, James R ^a   Cabral, João T ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

FULLERENE; POLYMER;

COMMERCIALIZATION; FULLERENE; OPTIMIZATION; POLYMER; RADIATION EXPOSURE; SOLAR POWER;

ARTICLE; BIOMECHANICS; CONTROLLED STUDY; CRYSTALLIZATION; DIFFUSION; LIGHT EXPOSURE; MOLECULAR DYNAMICS; OLIGOMERIZATION; SOLAR RADIATION; THERMOSTABILITY;

EID: 84881167751     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms3227     Document Type: Article

References (39)

1. He, Z. et al. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat. Photon 6, 591-595 (2012).
2. Jørgensen, M. et al. Stability of polymer solar cells. Adv. Mater. 24, 580-612 (2012).
3. Dennler, G., Scharber, M. C. & Brabec, C. J. Polymer-fullerene bulkheterojunction solar cells. Adv. Mater. 21, 1323-1338 (2009).
4. Peet, J. et al. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nat. Mater 6, 497-500 (2007). (Pubitemid 47143454)
5. Yang, X. et al. Morphology and thermal stability of the active layer in poly(pphenylenevinylene)/methanofullerene plastic photovoltaic devices. Macromolecules 37, 2151-2158 (2004).
6. Ebadian, S. et al. Effects of annealing and degradation on regioregular polythiophene-based bulk heterojunction organic photovoltaic devices. Sol. Energy Mater. Sol. Cells 94, 2258-2264 (2010).
7. McNeill, C. R. & Greenham, N. C. Conjugated-polymer blends for optoelectronics. Adv. Mater. 21, 3840-3850 (2009).
8. Salleo, A., Kline, R. J., DeLongchamp, D. M. & Chabinyc, M. L. Microstructural characterization and charge transport in thin films of conjugated polymers. Adv. Mater. 22, 3812-3838 (2010).
9. DeLongchamp, D. M., Kline, R. J. & Herzing, A. Nanoscale structure measurements for polymer-fullerene photovoltaics. Energy Environ. Sci. 5, 5980-5993 (2012).
10. Collins, B. A., Tumbleston, J. R. & Ade, H. Miscibility, crystallinity, and phase development in P3HT/PCBM solar cells: toward an enlightened understanding of device morphology and stability. J. Phys. Chem. Lett. 2, 3135-3145 (2011).
11. Shoaee, S. et al. Charge photogeneration for a series of thiazolo-thiazole donor polymers blended with the fullerene electron acceptors PCBM and ICBA. Adv. Funct. Mater 23, 3286-3298 (2013).
12. Yin, W. & Dadmun, M. A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams. ACS Nano 5, 4756-4768 (2011).
13. Pfannmöller, M. et al. Visualizing a homogeneous blend in bulk heterojunction polymer solar cells by analytical electron microscopy. Nano. Lett. 11, 3099-3107 (2011).
14. Wu, W.-R. et al. Competition between fullerene aggregation and poly(3- hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells. ACS Nano 5, 6233-6243 (2011).
15. Jamieson, F. C. et al. Fullerene crystallisation as a key driver of charge separation in polymer/fullerene bulk heterojunction solar cells. Chem. Sci. 3, 485-492 (2012).
16. Kim, J. Y. & Frisbie, C. D. Correlation of phase behavior and charge transport in conjugated polymer/fullerene blends. J. Phys. Chem. C 112, 17726-17736 (2008).
17. Bertho, S. et al. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells. Sol. Energy Mater. Sol. Cells 92, 753-760 (2008).
18. Eklund, P. C. et al. Photochemical transformation of C60 and C70 films. Thin Solid Films 257, 185-203 (1995).
19. Rao, A. M. et al. Photoinduced polymerization of solid C60 films. Science 259, 955-957 (1993). (Pubitemid 23675463)
20. Wang, J., Larsen, C., Wagberg, T. & Edman, L. Direct UV patterning of electronically active fullerene films. Adv. Funct. Mater. 21, 3723-3728 (2011).
21. Dzwilewski, A., Matyba, P. & Edman, L. Facile fabrication of efficient organic CMOS circuits. J. Phys. Chem. B 114, 135-140 (2009).
22. Wong, H. C. et al. Patterning polymer-fullerene nanocomposite thin films with light. Adv. Mater. 25, 985-991 (2013).
23. Rao, A. M. et al. Photoinduced polymerization of solid C70 films. Chem. Phys. Lett. 224, 106-112 (1994).
24. Lilliedal, M. R. et al. The effect of post-processing treatments on inflection points in current-voltage curves of roll-to-roll processed polymer photovoltaics. Sol. Energy Mater. Sol. Cells 94, 2018-2031 (2010).
25. Wang, T. et al. Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends. Adv. Funct. Mater 22, 1399-1408 (2012).
26. Wang, J., Enevold, J. & Edman, L. Photochemical transformation of fullerenes. Adv. Funct. Mater 23, 3220-3225 (2013).
27. Dzwilewski, A., Wagberg, T. & Edman, L. Photo-induced and resist-free imprint patterning of fullerene materials for use in functional electronics. J. Am. Chem. Soc. 131, 4006-4011 (2009).
28. Abhay Gusain, V. S., Veerender, P., Jha, P., Koiry, S. P., Chauhan, A. K. & Aswal, D. K. S.K.G. investigation on the effects of thermal annealing on PCDTBT:PCBM bulk-heterojunction polymer solar cells. AIP Conf. Proc. 1512, 776-777 (2012).
29. Ma, W. et al. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology. Adv. Funct. Mater. 15, 1617-1622 (2005). (Pubitemid 41454589)
30. Lu, X. et al. Bilayer order in a polycarbazole-conjugated polymer. Nat Commun. 3, 795 (2012).
31. De Bettignies, R., Leroy, J., Firon, M. & Sentein, C. Accelerated lifetime measurements of P3HT:PCBM solar cells. Synth. Met. 156, 510-513 (2006).
32. Bertho, S. et al. Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells. Sol. Energy Mater. Sol. Cells 91, 385-389 (2007). (Pubitemid 46149269)
33. Wang, D. H. et al. Stability comparison: A PCDTBT/PC71BM bulkheterojunction versus a P3HT/PC71BM bulk-heterojunction. Sol. Energy Mater. Sol. Cells 101, 249-255 (2012).
34. Ouhib, F. et al. Thermally stable bulk heterojunction solar cells based on crosslinkable acrylate-functionalized polythiophene diblock copolymers. Macromolecules 46, 785-795 (2013).
35. Labram, J. G., Kirkpatrick, J., Bradley, D. D. C. & Anthopoulos, T. D. Impact of fullerene molecular weight on P3HT:PCBM microstructure studied using organic thin-film transistors. Adv. Energy Mater. 1, 1176-1183 (2011).
36. Boland, P. et al. Investigation of structural, optical, and electrical properties of regioregular poly(3-hexylthiophene)/fullerene blend nanocomposites for organic solar cells. Thin Solid Films 518, 1728-1731 (2010).
37. Peters, C. H. et al. High efficiency polymer solar cells with long operating lifetimes. Adv. Energy Mater. 1, 491-494 (2011).
38. Drees, M. et al. Stabilization of the nanomorphology of polymer-fullerene 'bulk heterojunction' blends using a novel polymerizable fullerene derivative. J. Mater. Chem. 15, 5158-5163 (2005). (Pubitemid 43021893)
39. Cheng, Y.-J., Hsieh, C.-H., Li, P.-J. & Hsu, C.-S. Morphological stabilization by in situ polymerization of fullerene derivatives leading to efficient, thermally stable organic photovoltaics. Adv. Funct. Mater. 21, 1723-1732 (2011).