Ultrasonic cavitation test applied to thin metallic films for assessing their adhesion with mercaptosilanes and surface roughness

Journal of Materials Science

Volumn 49, Issue 19, 2014, Pages 6750-6761

  Heni, Wajdi ^a   Vonna, Laurent ^a   Fioux, Philippe ^a   Vidal, Loïc ^a   Haidara, Hamidou ^a  

^a UNIVERSITÉ DE HAUTE ALSACE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESION; BOND STRENGTH (MATERIALS); CAVITATION; COATINGS; GOLD; GOLD COATINGS; METALLIC FILMS; SURFACE CHEMISTRY; SURFACE ROUGHNESS; THIN FILMS;

ADHESIVE STRENGTH; APPLICATION FIELDS; COATING DELAMINATION; COPPER THIN FILM; SILICON SUBSTRATES; THIN METALLIC FILMS; TRIETHOXYSILANE; ULTRASONIC CAVITATION;

ULTRASONIC TESTING;

EID: 84904729937     PISSN: 00222461     EISSN: 15734803     Source Type: Journal    
DOI: 10.1007/s10853-014-8369-y     Document Type: Conference Paper

References (66)

1. Mittal KL (1995) Adhesion measurement of films and coatings. VSP, Utrecht
2. Mohseni E, Zalnezhad E, Bushroa AR (2014) Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: a review paper. Int J Adhes Adhes 48:238-257. doi: 10.1016/j.ijadhadh.2013.09.030
3. Vencl A, Arostegui S, Favaro G, Zivic F, Mrdak M, Mitrović S, Popovic V (2011) Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections. Tribol Int 44:1281-1288. doi: 10.1016/j.triboint.2011.04.002
4. Mittal KL (1995) Adhesion measurement of films & coatings: vol 2. VSP, Utrecht
5. Sinha SKK (2006) Scratching of materials and applications. Elsevier B.V, Amsterdam
6. 2 granular thin films. ACS Appl Mater Interfaces 2:2629-2636. doi: 10.1021/am100455q
7. Steller J (1999) International cavitation erosion test and quantitative assessment of material resistance to cavitation. Wear 233-235:51-64. doi: 10.1016/S0043-1648(99)00195-7
8. NAG/DAGA (2009) International Conference on Acoustics, Rotterdam, 23-26 March 2009
9. Karimi A, Martin JL (1986) Cavitation erosion of materials. Int Met Rev 31:1-26
10. Chen Y, Huang L, Shih T (2003) Diagnosis of oxide films by cavitation micro-jet impact. Mater Trans 44:327-335
11. Reisman GE, Brennen CE (1996) Pressure pulses generated by cloud cavitation. In: Fluids engineering division conference ASME, pp 319-328
12. Chahine GL (1984) Pressure generated by a bubble cloud collapse. Chem Eng Commun 28:355-367
13. Kwok CT, Cheng FT, Man HC (1998) Laser surface modification of UNS S31603 stainless steel using NiCrSiB alloy for enhancing cavitation erosion resistance. Surf Coat Technol 107:31-40. doi: 10.1016/S0257-8972(98)00549-0
14. Krella A, Czyżniewski A (2009) Cavitation resistance of Cr-N coatings deposited on austenitic stainless steel at various temperatures. Wear 266:800-809. doi: 10.1016/j.wear.2008.11.002
15. Chang JT, Yeh CH, He JL, Chen KC (2003) Cavitation erosion and corrosion behavior of Ni-Al intermetallic coatings. Wear 255:162-169. doi: 10.1016/S0043-1648(03)00199-6
16. Lin CJ, Chen KC, He JL (2006) The cavitation erosion behavior of electroless Ni-P-SiC composite coating. Wear 261:1390-1396. doi: 10.1016/j.wear.2006.03.054
17. Vallat M-F, Haidara H, Ziegler P, Rey D, Papirer Y, Schultz J (1996) Adhesive behavior of aluminum layers evaporated on polyester films. In:The proceedings of the 53rd international meeting of physical chemistry: Organic coatings, vol 354. pp 14-22
18. Haidara H, Vallat M, Schultz J (1989) Mesure de l'adhésion de couches minces par vibrations ultrasoniques. Comptes rendus de l'Académie des Sciences 309:1653-1657
19. Pigerre J (2004) Flash test development using ultrasonics for fast qualification of the mechanical resistance of industrial organic coatings Part I: methodological approach. Prog Org Coat 50:132-137. doi: 10.1016/j.porgcoat. 2004.01.004
20. Pigerre J, Rodriguez P, Mehinto T, Mansot J, Roos C (2005) Development of an ultrasonics-based flash test used for fast qualification of the mechanical resistance of industrial organic coatings Part II: comparative results. Prog Org Coat 54:377-383. doi: 10.1016/j.porgcoat.2005.07.009
21. Fernandez Rivas D, Verhaagen B, Seddon JRT, Zijlstra AG, Jiang L-M, Van der Sluis LWM, Versluis M, Lohse D, Gardeniers HJGE (2012) Localized removal of layers of metal, polymer, or biomaterial by ultrasound cavitation bubbles. Biomicrofluidics 6:34114. doi: 10.1063/1.4747166
22. Suhir E, Lee YC, Wong CP (2007) Micro- and opto-electronic materials and structures: physics, mechanics, design, reliability, packaging: materials physics - materials mechanics, vol 1. Springer, Boston
23. Ronald AC, Paul EK, Kevin DL, Robert LC (2004) Selecting metal alloy electric contact materials for MEMS switches. J Micromech Microeng 14:1157-1164
24. Holloway PH, Nelson CC (1976) In situ formation of diffusion barriers in thin film metallization systems. Thin Solid Films 35:13-16
25. Ono H, Nakano T, Ohta T (1994) Diffusion barrier effects of transition metals for Cu/M/Si multilayers (M = Cr, Ti, Nb, Mo, Ta, W). Appl Phys Lett 64:1511-1513. doi: 10.1063/1.111875
26. Miller D, Herrmann C, Maier H, George S, Stoldt C, Gall K (2005) Intrinsic stress development and microstructure evolution of Au/Cr/Si multilayer thin films subject to annealing. Scripta Mater 52:873-879. doi: 10.1016/j.scriptamat.2005.01.004
27. Munitz A, Komem Y (1984) Electrical resistance and Auger electron spectroscopy characteristics of interdiffusion in Au/metal bilayer films. Thin Solid Films 112:139-147
28. Holloway PH, Amos DE, Nelson GC (1976) Analysis of grain-boundary diffusion in thin films: chromium in gold. J Appl Phys 47:3769. doi: 10.1063/1.323259
29. Love JC, Estroff L, Kriebel JK, Nuzzo RG, Whitesides GM (2005) Self-assembled monolayers of thiolates on metals as a form of nanotechnology. Chem Rev 105:1103-1169. doi: 10.1021/cr0300789
30. Kim H, Boiadjiev V, Houston J, Zhu X, Kiely J (2001) Tribological properties of self-assembled monolayers on Au, SiOx and Si surfaces. Tribol Lett 10:97-101
31. Lee K-H, Huang K-M, Tseng W-L, Chiu T-C, Lin Y-W, Chang H-T (2007) Manipulation of the growth of gold and silver nanomaterials on glass by seeding approach. Langmuir 23:1435-1442. doi: 10.1021/la061880j
32. Brito R, Rodríguez V, Figuero J, Cabrera C (2002) Adsorption of 3-mercaptopropyltrimethoxysilane and 3-aminopropyltrimethoxysilane at platinum electrodes. J Electroanal Chem 520:47-52
33. Ganesan PG, Kumar A, Ramanath G (2005) Surface oxide reduction and bilayer molecular assembly of a thiol-terminated organosilane on Cu. Appl Phys Lett 87:011905. doi: 10.1063/1.1968414
34. 2 and 3-mercaptopropyltrimethoxysilane-modified SiO2 substrates. J Vac Sci Technol A 20:589-596
35. Tremont RJ, Blasini DR, Cabrera CR (2003) Controlled self-assembly of mercapto and silane terminated molecules at Cu surfaces. J Electroanal Chem 556:147-158. doi: 10.1016/S0022-0728(03)00340-1
36. Kirchner C, George M, Stein B, Parak WJ, Gaub HE, Seitz M (2002) Corrosion protection and long-term chemical functionalization of gallium arsenide in an aqueous environment. Adv Funct Mater 12:266-276
37. Goss CA, Charych DH, Majda M (1991) Application of (3-mercaptopropyl) trimethoxysilane as a molecular adhesive in the fabrication of vapor-deposited gold electrodes on glass substrates. Anal Chem 63:85-88
38. Wasserman SR, Biebuyck H, Whitesides GM (1989) Monolayers of 11-trichlorosilylundecyl thioacetate: a system that promotes adhesion between silicon dioxide and evaporated gold. J Mater Res 4:886-892
39. Huang X, Huang H, Wu N, Hu R, Zhu T, Liu Z (2000) Investigation of structure and chemical states of self-assembled Au nanoscale particles by angle-resolved X-ray photoelectron spectroscopy. Surf Sci 459:183-190. doi: 10.1016/S0039-6028(00)00483-0
40. Brust M, Bethell D, Kiely CJ, Schiffrin DJ (1998) Self-assembled gold nanoparticle thin films with nonmetallic optical and electronic properties. Langmuir 14:5425-5429. doi: 10.1021/la980557g
41. Snow AW, Ancona MG, Kruppa W, Jernigan GG, Foos EE, Park D (2002) Self-assembly of gold nanoclusters on micro- and nanoelectronic substrates. J Mater Chem 12:1222-1230. doi: 10.1039/b108859a
42. Childs WR, Nuzzo RG (2005) Large-area patterning of coinage-metal thin films using decal transfer lithography. Langmuir 21:195-202. doi: 10.1021/la047884a
43. Siegfried T, Ekinci Y, Martin OJF, Sigg H (2013) Engineering metal adhesion layers that do not deteriorate plasmon resonances. ACS Nano 7:2751-2757. doi: 10.1021/nn4002006
44. Habteyes TG, Dhuey S, Wood E, Gargas D, Cabrini S, Schuck PJ, Alivisatos AP, Leone SR (2012) Plasmon damping and molecular linker as a nondamping alternative. ACS Nano 6:5702-5709
45. Gandhi DD, Ganesan PG, Chandrasekar V, Gan Z, Mhaisalkar SG, Li H, Ramanath G (2007) Molecular-nanolayer-induced suppression of in-plane Cu transport at Cu-silica interfaces. Appl Phys Lett 90:163507. doi: 10.1063/1.2722667
46. Ben Ali M, Bessueille F, Chovelon JM, Abdelghani A, Jaffrezic-Renault N, Maaref M, Martelet C (2008) Use of ultra-thin organic silane films for the improvement of gold adhesion to the silicon dioxide wafers for (bio)sensor applications. Mater Sci Eng C 28:628-632. doi: 10.1016/j.msec.2007.10.048
47. Wortman JJ, Evans RA (1965) Young's modulus, shear modulus, and poisson's ratio in silicon and germanium. J Appl Phys 36:153. doi: 10.1063/1.1713863
48. Martienssen W, Warlimont H (2005) Springer handbook of condensed matter and materials data. Springer, Heidelberg
49. García-Atance Fatjó G, Torres Pérez A, Hadfield M (2011) Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn. Ultrason Sonochem 18:73-79. doi: 10.1016/j.ultsonch.2009.12.006
50. Qin CP, Zheng YG, Wei R (2010) Cavitation erosion behavior of nanocomposite Ti-Si-C-N and Ti/Ti-Si-C-N coatings deposited on 2Cr13 stainless steel using a plasma enhanced magnetron sputtering process. Surf Coat Technol 204:3530-3538. doi: 10.1016/j.surfcoat.2010.04.012
51. Niebuhr D (2007) Cavitation erosion behavior of ceramics in aqueous solutions. Wear 263:295-300. doi: 10.1016/j.wear.2006.12.040
52. Fernandez Rivas D, Betjes J, Verhaagen B, Bouwhuis W, Bor TC, Lohse D, Gardeniers HJGE (2013) Erosion evolution in mono-crystalline silicon surfaces caused by acoustic cavitation bubbles. J Appl Phys 113:064902. doi: 10.1063/1.4791582
53. Karunamurthy B, Hadfield M, Vieillard C, Morales G (2010) Cavitation erosion in silicon nitride: experimental investigations on the mechanism of material degradation. Tribol Int 43:2251-2257. doi: 10.1016/j.triboint.2010.06. 012
54. Majumder C, Briere TM, Mizuseki H, Kawazoe Y (2002) Structural investigation of thiophene thiol adsorption on Au nanoclusters: influence of back bonds. J Chem Phys 117:2819. doi: 10.1063/1.1491404
55. Ulman A (1996) Formation and structure of self-assembled monolayers. Chem Rev 96:1533-1554
56. Özer N, Tepehan F (1993) Structure and optical properties of electrochromic copper oxide films prepared by reactive and conventional evaporation techniques. Sol Energy Mater Sol Cells 30:13-26
57. Chatain D, Chabert F, Ghetta V, Fouletier J (1993) New experimental setup for wettability characterization under monitored oxygen activity: I, role of oxidation state and defect concentration on oxide wettability by gold. J Am Ceram Soc 76:1568-1576
58. Pocius AV (2002) The mechanics of adhesion. Elsevier, Amsterdam
59. Mittal KL (2001) Adhesion aspects of thin films, vol 1. VSP, Utrecht
60. Han JT, Kim S, Karim A (2007) UVO-tunable superhydrophobic to superhydrophilic wetting transition on biomimetic nanostructured surfaces. Langmuir 23:2608-2614
61. Erck RA, Erdemir A, Fenske GR (1990) Effect of film adhesion on tribological properties of silver-coated alumina. Surf Coat Technol 43-44:577-587
62. Mittal KL (2001) Metallized plastics 7: fundamental and applied aspects. VSP, Utrecht
63. Jiang N, Liu S, Chen D (2008) Effect of roughness and wettability of silicon wafer in cavitation erosion. Chin Sci Bull 53:2879-2885
64. Lima MM, Godoy C, Modenesi PJ, Avelar-Batista JC, Davoson A, Matthews A (2004) Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coat-ings. Surf Coat Technol 177:489-496
65. Launey ME, Ritchie RO (2009) On the fracture toughness of advanced materials. Adv Mater 21:2103-2110. doi: 10.1002/adma.200803322
66. Singh J, Whitten JE (2008) Adsorption of 3-mercaptopropyltrimethoxysilane on silicon oxide surfaces and adsorbate interaction with thermally deposited gold. J Phys Chem C 112:19088-19096