A Study on surface modification of al7075-t6 alloy against fretting fatigue phenomenon

Advances in Materials Science and Engineering

Volumn 2014, Issue , 2014, Pages

  Mohseni, E ^a   Zalnezhad, E ^a   Sarhan, Ahmed A D ^a   Bushroa, A R ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; ALUMINUM; AUTOMOBILE MATERIALS; DEPOSITION; FATIGUE OF MATERIALS; FRETTING CORROSION; HARD COATINGS; PHYSICAL VAPOR DEPOSITION; SHOT PEENING;

ENERGY-SAVING STRATEGIES; FRETTING FATIGUE LIVES; FRETTING FATIGUES; ION-BEAM-ENHANCED DEPOSITION; LASER SHOCK PEENING; LIGHTWEIGHT MATERIALS; SURFACE COATINGS; SURFACE MODIFICATION METHODS;

ALUMINUM ALLOYS;

EID: 84904106985     PISSN: 16878434     EISSN: 16878442     Source Type: Journal    
DOI: 10.1155/2014/474723     Document Type: Review

References (134)

1. Waterhouse R. B., Fretting Corrosion 1972 Pergamon Press
2. Berthier Y., Vincent L., Godet M., Fretting fatigue and fretting wear. Tribology International 1989 22 4 235 242 2-s2.0-0024715423
3. Berthier Y., Colombie C., Vicent L., Godet M., Fretting wear mechanisms and their effects on fretting fatigue. Journal of Tribology 1988 110 3 517 524 2-s2.0-0024053604 (Pubitemid 18652292)
4. Forsyth P., Occurrence of fretting fatigue failures in practice. Fretting Fatigue 1981 99 125
5. Hills D. A., Mechanics of fretting fatigue. Wear 1994 175 1-2 107 113 2-s2.0-0028450442 (Pubitemid 282371)
6. Waterhouse R. B., Fretting Fatigue 1981 IDEAS International
7. Waterhouse R. B., Lindley T., Fretting fatigue. Proceedings of the International Symposium on Fretting Fatigue 1994 University of Sheffield Mechanical Engineering Publications
8. Taylor D., Waterhouse R., Wear, fretting and fretting fatigue. Metal Behavior and Surface Engineering 1989 13 35
9. Juuma T., Torsional fretting fatigue strength of a shrink-fitted shaft with a grooved hub. Tribology International 2000 33 8 537 543 2-s2.0-0034243199 10.1016/S0301-679X(00)00102-X
10. Sato J., Recent trend in studies of fretting wear. Journal of Japan Society of Lubrication Engineers 1985 30 12 853 858 2-s2.0-0022232759 (Pubitemid 16547777)
11. Majzoobi G. H., Nemati J., Novin Rooz A. J., Farrahi G. H., Modification of fretting fatigue behavior of AL7075-T6 alloy by the application of titanium coating using IBED technique and shot peening. Tribology International 2009 42 1 121 129 2-s2.0-56249125255 10.1016/j.triboint.2008.05.006
12. Sato J., Shima M., Sugawara T., Tahara A., Effect of lubricants on fretting wear of steel. Wear 1988 125 1-2 83 95 2-s2.0-0024045073 (Pubitemid 18653304)
13. Gordelier S. C., Chivers T. C., A literature review of palliatives for fretting fatigue. Wear 1979 56 1 177 190 2-s2.0-0018517808 (Pubitemid 10414466)
14. Qiu Y., Roylance B. J., The effect of lubricant additives on fretting wear. Lubrication Engineering 1992 48 10 801 808 2-s2.0-0026798725
15. Waterhouse R., The effect of surface treatment on the fatigue and fretting-fatigue of metallic materials. Metal Treatments against Wear, Corrosion, Fretting and Fatigue 1988 Pergamon Press 31 40
16. Xue L., Koul A., Bibby M., Wallace W., Islam M., A survey of surface treatments to improve the fretting fatigue resistance of Ti-6Al-4V. International Journal of Fatigue 1996 18 510 510
17. Harris S. J., Overs M. P., Gould A. J., The use of coatings to control fretting wear at ambient and elevated temperatures. Wear 1985 106 1-3 35 52 2-s2.0-0022153079 (Pubitemid 16494606)
18. Bill R. C., Fretting of AISI 9310 steel and selected fretting-resistant surface treatments. ASLE Transactions 1978 21 3 236 242 2-s2.0-0017994017 (Pubitemid 8618948)
19. Fu Y., Wei J., Batchelor A. W., Some considerations on the mitigation of fretting damage by the application of surface-modification technologies. Journal of Materials Processing Technology 2000 99 1 231 245 2-s2.0-0033908536 10.1016/S0924-0136(99)00429-X (Pubitemid 30557731)
20. Fu Y., Loh N. L., Batchelor A. W., Liu D., He J., Xu K., Improvement in fretting wear and fatigue resistance of Ti-6Al-4V by application of several surface treatments and coatings. Surface and Coatings Technology 1998 106 2-3 193 197 2-s2.0-0032482917
21. Xue L., Islam M., Koul A. K., Bibby M., Wallace W., Laser gas nitriding of Ti-6Al-4V. Part 1: optimization of the process. Advanced Performance Materials 1997 4 1 25 47 2-s2.0-0030813273 10.1023/A:1008668115226
22. Majzoobi G. H., Jaleh M., Duplex surface treatments on AL7075-T6 alloy against fretting fatigue behavior by application of titanium coating plus nitriding. Materials Science and Engineering A 2007 452-453 673 681 2-s2.0-33847271637 10.1016/j.msea.2006.11.007
23. Nowell D., Hills D. A., Mechanics of fretting fatigue tests. International Journal of Mechanical Sciences 1987 29 5 355 365 2-s2.0-0023158182
24. Nikitin I., Altenberger I., Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600°C. Materials Science and Engineering A 2007 465 1-2 176 182 2-s2.0-34250867504 10.1016/j.msea.2007.02.004 (Pubitemid 46979929)
25. Nalla R. K., Altenberger I., Noster U., Liu G. Y., Scholtes B., Ritchie R. O., On the influence of mechanical surface treatments-deep rolling and laser shock peening-on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures. Materials Science and Engineering A 2003 355 1-2 216 230 2-s2.0-0038268660 10.1016/S0921-5093(03)00069-8 (Pubitemid 36845015)
26. Lindley T. C., Fretting fatigue in engineering alloys. International Journal of Fatigue 1997 19 1 S39 S49 2-s2.0-0031384153 (Pubitemid 127669845)
27. Matin M. A., Vellinga W. P., Geers M. G. D., Thermomechanical fatigue damage evolution in SAC solder joints. Materials Science and Engineering A 2007 445-446 73 85 2-s2.0-33845896801 10.1016/j.msea.2006.09.037 (Pubitemid 46024487)
28. Hirata M., Maejima M., Saruwatari K., Shigeno H., Takaya M., Rotational bending fatigue of anodized coating of aluminum. Journal of the Surface Finishing Society of Japan 1996 47 4 376 377 2-s2.0-0030372764
29. Cree A. M., Weidmann G. W., Hermann R., Film-assisted fatigue crack propagation in anodized aluminium alloys. Journal of Materials Science Letters 1995 14 21 1505 1507 2-s2.0-0029409419 10.1007/BF00633144
30. Reybet Degat P., Zhou Z. R., Vincent L., Fretting cracking behaviour on pre-stressed aluminium alloy specimens. Tribology International 1997 30 3 215 223 2-s2.0-0031103534 (Pubitemid 127411362)
31. McColl I. R., Harris S. J., Hu Q., Spurr G. J., Wood P. A., Influence of surface and heat treatment on the fretting wear of an aluminium alloy reinforced with SiC particles. Wear 1997 203-204 507 515 2-s2.0-0031104324
32. Barrie R. L., Gabb T. P., Telesman J., Kantzos P. T., Prescenzi A., Biles T., Bonacuse P. J., Effectiveness of shot peening in suppressing fatigue cracking at non-metallic inclusions in Udimet® 720. Materials Science and Engineering A 2008 474 1-2 71 81 2-s2.0-37648998864 10.1016/j.msea.2007.03.100
33. Godja N., Kiss N., Löcker C., Schindel A., Gavrilovic A., Wosik J., Mann R., Wendrinsky J., Merstallinger A., Nauer G. E., Preparation and characterization of spark-anodized Al-alloys: physical, chemical and tribological properties. Tribology International 2010 43 7 1253 1261 2-s2.0-77953285961 10.1016/j.triboint.2010.01.007
34. Sadeler R., Atasoy S., ArIcI A., Totik Y., The fretting fatigue of commercial hard anodized aluminum alloy. Journal of Materials Engineering and Performance 2009 18 9 1280 1284 2-s2.0-70450284687 10.1007/s11665-009-9388-8
35. Oskouei R. H., Ibrahim R. N., The effect of clamping compressive stresses on the fatigue life of Al 7075-T6 bolted plates at different temperatures. Materials and Design 2012 34 90 97 2-s2.0-80052038152 10.1016/j.matdes.2011.07. 073
36. Oskouei R. H., Ibrahim R. N., The effect of typical flight temperatures on the fatigue behaviour of Al 7075-T6 clamped plates. Materials Science and Engineering A 2011 528 3 1527 1533 2-s2.0-78650184190 10.1016/j.msea.2010.10.074
37. Zalnezhad E., Sarhan A. A. D., Hamdi M., Optimizing the PVD TiN thin film coating's parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. International Journal of Advanced Manufacturing Technology 2013 64 1-4 281 290 2-s2.0-84872499210 10.1007/s00170-012-4022-6
38. Majzoobi G. H., Azadikhah K., Nemati J., The effects of deep rolling and shot peening on fretting fatigue resistance of Aluminum-7075-T6. Materials Science and Engineering A 2009 516 1-2 235 247 2-s2.0-67649828035 10.1016/j.msea.2009.03.020
39. O'Hara P., Superfinishing and shot peening of surfaces to optimise roughness and stress. Proceedings of the International Conference on Computer Methods and Experimental Measurments for Surface Treatment Effects 1999 321 330
40. Kocan M., Ostertag A., Wagner L., Shot peening and roller-burnishing to improve fatigue resistance of the (a+ß) titanium alloy Ti-6Al-4V. Shot Peening 2003 461 467 10.1002/3527606580.ch59
41. Jiang X. P., Man C.-S., Shepard M. J., Zhai T., Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V. Materials Science and Engineering A 2007 468-470 137 143 2-s2.0-34548120833 10.1016/j.msea.2007.01.156 (Pubitemid 47300129)
42. Raghavan R., Ayer R., Jin H. W., Marzinsky C. N., Ramamurty U., Effect of shot peening on the fatigue life of a Zr-based bulk metallic glass. Scripta Materialia 2008 59 2 167 170 2-s2.0-43449124699 10.1016/j.scriptamat.2008.03.009
43. Ali A., An X., Rodopoulos C. A., Brown M. W., O'Hara P., Levers A., Gardiner S., The effect of controlled shot peening on the fatigue behaviour of 2024-T3 aluminium friction stir welds. International Journal of Fatigue 2007 29 8 1531 1545 2-s2.0-33947725148 10.1016/j.ijfatigue.2006.10.032 (Pubitemid 46505313)
44. Wagner L., Lütjering G., Influence of shot peening parameters on the surface layer properties and the fatigue life of Ti-6Al-4V. Proceedings of the Second International Conference on Shot Peening (ICSP '48) 1984 194 200
45. Martin U., Altenberger I., Scholtes B., Kremmer K., Oettel H., Cyclic deformation and near surface microstructures of normalized shot peened steel SAE 1045. Materials Science and Engineering A 1998 246 1-2 69 80 2-s2.0-0032523961 10.1016/S0921-5093(97)00755-7 (Pubitemid 28437454)
46. Turnbull A., De Los Rios E. R., Tait R. B., Laurant C., Boabaid J. S., Improving the fatigue crack resistance of Waspaloy by shot peening. Fatigue and Fracture of Engineering Materials and Structures 1998 21 12 1513 1524 2-s2.0-0032272879 (Pubitemid 128496582)
47. Fairand B. P., Wilcox B. A., Gallagher W. J., Williams D. N., Laser shock-induced microstructural and mechanical property changes in 7075 aluminum. Journal of Applied Physics 1972 43 9 3893 3895 2-s2.0-36849100855 10.1063/1.1661837
48. Clauer A. H., Fairand B. P., Wilcox B. A., Pulsed laser induced deformation in an Fe-3 Wt Pct Si alloy. Metallurgical Transactions A 1977 8 1 119 125 2-s2.0-0017417907 10.1007/BF02677273
49. Clauer A. H., Fairand B. P., Wilcox B. A., Laser shock hardening of weld zones in aluminum alloys. Metallurgical Transactions A 1977 8 1871 1876 10.1007/BF02646559
50. Fairand B. P., Clauer A. H., Laser generation of high-amplitude stress waves in materials. Journal of Applied Physics 1979 50 3 1497 1502 2-s2.0-0018444774 10.1063/1.326137 (Pubitemid 9450175)
51. Clauer A., Fairand B., Metzbower E., Applications of Lasers in Materials Processing 1979 Metals Park, Ohio, USA American Society for Metals
52. King A., Steuwer A., Woodward C., Withers P. J., Effects of fatigue and fretting on residual stresses introduced by laser shock peening. Materials Science and Engineering A 2006 435-436 12 18 2-s2.0-33749064749 10.1016/j.msea.2006.07.020 (Pubitemid 44458191)
53. Forget P., Strude J. L., Jeandin M., Lu J., Castex L., Laser shock surface treatment of Ni-based superalloys. Materials and Manufacturing Processes 1990 5 4 501 528 2-s2.0-0025660807
54. Peyre P., Fabbro R., Laser shock processing: a review of the physics and applications. Optical and Quantum Electronics 1995 27 12 1213 1229 2-s2.0-0029491070 10.1007/BF00326477
55. Chu J. P., Rigsbee J. M., Banas G., Lawrence F. V., Elsayed-Ali H. E., Effects of laser-shock processing on the microstructure and surface mechanical properties of Hadfield manganese steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 1995 26 6 1507 1517 2-s2.0-0029322050
56. Peyre P., Fabbro R., Merrien P., Lieurade H. P., Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour. Materials Science and Engineering A 1996 210 1-2 102 113 2-s2.0-0030166785 (Pubitemid 126376981)
57. Dane C. B., Hackel L. A., Daly J., Harrison J., Shot peening with lasers. Advanced Materials and Processes 1998 153 5 37 38 2-s2.0-0032074201
58. Peyre P., Scherpereel X., Berthe L., Carboni C., Fabbro R., Béranger G., Lemaitre C., Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance. Materials Science and Engineering A 2000 280 2 294 302 2-s2.0-0033998964 10.1016/S0921-5093(99)00698-X (Pubitemid 30221750)
59. Chu J. P., Rigsbee J. M., Banaś G., Elsayed-Ali H. E., Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel. Materials Science and Engineering A 1999 260 1-2 260 268 2-s2.0-0033078360 (Pubitemid 129506465)
60. Majzoobi G. H., Ahmadkhani A. R., The effects of multiple re-shot peening on fretting fatigue behavior of Al7075-T6. Surface and Coatings Technology 2010 205 1 102 109 2-s2.0-77954955992 10.1016/j.surfcoat.2010.06.014
61. Clauer A. H., Gregory J. K., Rack H. J., Eylon D., Laser shock peening for fatigue resistance. Surface Performance of Titanium 1996 Warrendale, Pa, USA TMS 217 230
62. Clauer A. H., Holbrook J. H., Fairand B. P., Effects of laser induced shock waves on metals. Shock Waves and High-Strain-Rate Phenomena in Metals 1981 Springer 675 702
63. Design S. F., Committee E., SAE Manual on Shot Peening (SAE HS-84) 1991 Society of Automotive Engineers
64. Kobayashi M., Matsui T., Murakami Y., Mechanism of creation of compressive residual stress by shot peening. International Journal of Fatigue 1998 20 5 351 357 2-s2.0-0032074559 (Pubitemid 128413092)
65. Hammersley G., Hackel L. A., Harris F., Surface prestressing to improve fatigue strength of components by laser shot peening. Optics and Lasers in Engineering 2000 34 4-6 327 337 2-s2.0-0034290097 10.1016/S0143-8166(00)00083-X (Pubitemid 32196161)
66. Prevéy P. S., Shepard M. J., Smith P. R., The effect of Low Plasticity Burnishing (LPB) on the HCF performance and FOD resistance of Ti-6AI-4V. DTIC Document 2001
67. Zhuang W. Z., Halford G. R., Investigation of residual stress relaxation under cyclic load. International Journal of Fatigue 2001 23 1 S31 S37 2-s2.0-0035210405 (Pubitemid 33142359)
68. Harris S. G., Doyle E. D., Vlasveld A. C., Audy J., Long J. M., Quick D., Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings. Wear 2003 254 1-2 185 194 2-s2.0-0037259734 10.1016/S0043-1648(02)00290-9 (Pubitemid 36154608)
69. Hsu C.-H., Chen Y.-D., A study on the abrasive and erosive wear behavior of arc-deposited Cr-N-O coatings on tool steel. Thin Solid Films 2009 517 5 1655 1661 2-s2.0-56949106061 10.1016/j.tsf.2008.09.083
70. Jin O., Mall S., Sanders J. H., Sharma S. K., Durability of Cu-Al coating on Ti-6Al-4V substrate under fretting fatigue. Surface and Coatings Technology 2006 201 3-4 1704 1710 2-s2.0-33748543960 10.1016/j.surfcoat.2006.02.051 (Pubitemid 44362122)
71. Schouterden K., Blanpain B., Celis J. P., Vingsbo O., Fretting of titanium nitride and diamond-like carbon coatings at high frequencies and low amplitude. Wear 1995 181-183 1 86 93 2-s2.0-0029253161
72. Liskiewicz T., Fouvry S., Wendler B., Impact of variable loading conditions on fretting wear. Surface and Coatings Technology 2003 163-164 465 471 2-s2.0-0037472567 10.1016/S0257-8972(02)00643-6 (Pubitemid 36122295)
73. Ohmae N., Nakai T., Tsukizoe T., Prevention of fretting by ion plated film. Wear 1974 30 3 299 309 2-s2.0-0016356144
74. Ohmae N., Tsukizoe T., Nakai T., Ion-plated thin films for anti-wear applications. Journal of Lubrication Technology 1978 100 1 129 135 2-s2.0-0017915951 (Pubitemid 8572547)
75. Subramanian B., Jayachandran M., Characterization of reactive magnetron sputtered nanocrystalline titanium nitride (TiN) thin films with brush plated Ni interlayer. Journal of Applied Electrochemistry 2007 37 9 1069 1075 2-s2.0-34547404707 10.1007/s10800-007-9357-6 (Pubitemid 47174771)
76. Hsieh J. H., Liang C., Yu C. H., Wu W., Deposition and characterization of TiAlN and multi-layered TiN/TiAlN coatings using unbalanced magnetron sputtering. Surface and Coatings Technology 1998 108-109 132 137 2-s2.0-0032184141
77. Huang J.-H., Lau K.-W., Yu G.-P., Effect of nitrogen flow rate on structure and properties of nanocrystalline TiN thin films produced by unbalanced magnetron sputtering. Surface and Coatings Technology 2005 191 1 17 24 2-s2.0-10244253937 10.1016/j.surfcoat.2004.07.066 (Pubitemid 39621316)
78. Tan C. W., Miao J., Optimization of sputtered Cr/Au thin film for diaphragm-based MEMS applications. Thin Solid Films 2009 517 17 4921 4925 2-s2.0-65749095396 10.1016/j.tsf.2009.03.151
79. Blanpain B., Mohrbacher H., Liu E., Celis J. P., Roos J. R., Hard coatings under vibrational contact conditions. Surface and Coatings Technology 1995 74-75 2 953 958 2-s2.0-0029388411 10.1016/0257-8972(95)08219-0
80. Ezuber H., El-Houd A., El-Shawesh F., A study on the corrosion behavior of aluminum alloys in seawater. Materials and Design 2008 29 4 801 805 2-s2.0-38949087169 10.1016/j.matdes.2007.01.021 (Pubitemid 351218061)
81. Camargo A., Voorwald H., Influence of anodization on the fatigue strength of 7050-T7451 aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures 2007 30 11 993 1007 2-s2.0-35348855722 10.1111/j.1460-2695.2007. 01169.x (Pubitemid 47578047)
82. Rajasekaran B., Ganesh Sundara Raman S., Rama Krishna L., Joshi S. V., Sundararajan G., Influence of microarc oxidation and hard anodizing on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy. Surface and Coatings Technology 2008 202 8 1462 1469 2-s2.0-37049023499 10.1016/j.surfcoat.2007.06. 058 (Pubitemid 350246289)
83. Sarhan A. A. D., Zalnezhad E., Hamdi M., The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering A 2012 2-s2.0-84867305283 10.1016/j.msea.2012. 09.082
84. Ghani J. A., Choudhury I. A., Hassan H. H., Application of Taguchi method in the optimization of end milling parameters. Journal of Materials Processing Technology 2004 145 1 84 92 2-s2.0-0346093741 10.1016/S0924-0136(03)00865-3
85. Farooq M., Lee Z. H., Computations of the optical properties of metal/insulator-composites for solar selective absorbers. Renewable Energy 2003 28 9 1421 1431 2-s2.0-0037410840 10.1016/S0960-1481(02)00033-2 (Pubitemid 36270531)
86. Smidt F. A., Use of ion beam assisted deposition to modify the microstructure and properties of thin films. International Materials Reviews 1990 35 2 61 128 2-s2.0-0025556802
87. Hirvonen J. K., Ion beam assisted thin film deposition. Materials Science Reports 1991 6 6 215 274 2-s2.0-0026188192
88. Fladry H., Tegen N., Wolf G. K., Ion beam induced adhesion improvement of metal layers-a comparative study on composite layers. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 1994 91 1-4 575 579 2-s2.0-0001686837
89. Hubler G. K., Fundamentals of ion-beam-assisted deposition: technique and film properties. Materials Science and Engineering A 1989 115 181 192 2-s2.0-0024715808
90. He X.-M., Li W.-Z., Li H.-D., Ion beam assisted deposition of diamond-like carbon onto steel materials: preparation and advantages. Surface and Coatings Technology 1996 84 1-3 414 419 2-s2.0-0030269557 10.1016/S0257-8972(95)02818-8 (Pubitemid 126376189)
91. Bäther K.-H., Herrmann U., Schröer A., Ion-beam-assisted deposition of magnetron-sputtered metal nitrides. Surface and Coatings Technology 1995 74-75 2 793 801 2-s2.0-0029388743 10.1016/0257-8972(95)08277-8
92. Zaytouni M., Riviere J. P., Denanot M. F., Allain J., Structural characterization of SiC films prepared by dynamic ion mixing. Thin Solid Films 1996 287 1-2 1 7 2-s2.0-0030261128 (Pubitemid 126388488)
93. Hubler G. K., Sprague J. A., Energetic particles in PVD technology: particle-surface interaction processes and energy-particle relationships in thin film deposition. Surface and Coatings Technology 1996 81 1 29 35 2-s2.0-0030148825 10.1016/0257-8972(95)02617-7 (Pubitemid 126383737)
94. Bell T., Lanagan J., Morton P. H., Bergmann H. W., Staines A. M., Surface engineering of titanium with nitrogen. Surface Engineering 1986 2 2 133 143 2-s2.0-0022513146
95. Yilbaş B. S., Sahin A. Z., Al-Garni A. Z., Said S. A. M., Ahmed Z., Abdulaleem B. J., Sami M., Plasma nitriding of Ti-6Al-4V alloy to improve some tribological properties. Surface and Coatings Technology 1996 80 3 287 292 2-s2.0-0029672956 10.1016/0257-8972(95)02472-7 (Pubitemid 126403100)
96. Goudarzi S., Khojier K., Savaloni H., Zalnezhad E., On the dependence of mechanical and tribological properties of sputtered chromium nitride thin films on deposition power. Advanced Materials Research 829 352 356 10.4028/www.scientific.net/AMR.829.352
97. Wu S. K., Lin H. C., Lee C. Y., Gas nitriding of an equiatomic TiNi shape memory alloy. II: hardness, wear and shape memory ability. Surface and Coatings Technology 1999 113 1-2 13 16 2-s2.0-0032678302
98. Chen K. C., Jaung G. J., D.c. diode ion nitriding behavior of titanium and Ti-6Al-4V. Thin Solid Films 1997 303 1-2 226 231 2-s2.0-0031190718 (Pubitemid 127366903)
99. Muraleedharan T. M., Meletis E. I., Surface modification of pure titanium and Ti6A14V by intensified plasma ion nitriding. Thin Solid Films 1992 221 1-2 104 113 2-s2.0-0026961141 (Pubitemid 23614406)
100. Xue L., Islam M. U., Koul A. K., Wallace W., Bibby M., Laser gas nitriding of Ti-6Al-4V alloy. Materials and Manufacturing Processes 1997 12 5 799 817 2-s2.0-0031236408 (Pubitemid 127550599)
101. Zhecheva A., Sha W., Malinov S., Long A., Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods. Surface and Coatings Technology 2005 200 7 2192 2207 2-s2.0-29244441985 10.1016/j.surfcoat.2004.07.115 (Pubitemid 41823797)
102. O'Brien J. M., Goodman D., Plasma (ion) nitriding. ASM Handbook 1991 4 ASM International 420 424
103. Puchi-Cabrera E. S., Matínez F., Herrera I., Berríos J. A., Dixit S., Bhat D., On the fatigue behavior of an AISI 316L stainless steel coated with a PVD TiN deposit. Surface and Coatings Technology 2004 182 2-3 276 286 2-s2.0-2142755382 10.1016/j.surfcoat.2003.07.003 (Pubitemid 38537243)
104. Zalnezhad E., Sarhan A. A. D., Hamdi M., Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering A 2013 559 436 446 2-s2.0-84867746085 10.1016/j.msea.2012.08.123
105. Puchi-Cabrera E. S., Staia M. H., Lesage J., Gil L., Villalobos- Gutiérrez C., La Barbera-Sosa J., Ochoa-Pérez E. A., Le Bourhis E., Fatigue behavior of AA7075-T6 aluminum alloy coated with ZrN by PVD. International Journal of Fatigue 2008 30 7 1220 1230 2-s2.0-41549123269 10.1016/j.ijfatigue.2007.09.001 (Pubitemid 351471724)
106. Pao P. S., Gill S. J., Feng C. R., Sankaran K. K., Corrosion-fatigue crack growth in friction stir welded Al 7050. Scripta Materialia 2001 45 5 605 612 2-s2.0-0035850571 (Pubitemid 32761412)
107. Rateick R. G. Jr., Griffith R. J., Hall D. A., Thompson K. A., Relationship of microstructure to fatigue strength loss in anodised aluminium-copper alloys. Materials Science and Technology 2005 21 10 1227 1235 2-s2.0-27544452118 10.1179/174328405X62288 (Pubitemid 41541873)
108. Monsalve A., Páez M., Toledano M., Artigas A., Sepúlveda Y., Valencia N., S-N-P curves in 7075 T7351 and 2024 T3 aluminium alloys subjected to surface treatments. Fatigue and Fracture of Engineering Materials and Structures 2007 30 8 748 758 2-s2.0-34547745848 10.1111/j.1460-2695.2007. 01134.x (Pubitemid 47225579)
109. Zhang Q., Wang W., Study of anodizing behavior and corrosion resistance of 7050 T7451 alloy. Materials Science and Engineering A 2000 280 1 168 172 2-s2.0-0034005086 10.1016/S0921-5093(99)00685-1 (Pubitemid 30221759)
110. Sharp M. L., Nordmark G. E., Menzemer C. C., Fatigue Design of Aluminium Components and Structures 1996 New York, NY, USA McGraw-Hill
111. Fu Y., Lam Loh N., W. Batchelor A., Zhu X., Xu K., He J., Preparation and fretting wear behavior of ion-beam-enhanced-deposition CrN films. Materials Science and Engineering A 1999 265 1-2 224 232 2-s2.0-0345643343 10.1016/S0921-5093(98)01148-4 (Pubitemid 29285999)
112. Waterhouse R. B., Trowsdale A. J., Residual stress and surface roughness in fretting fatigue. Journal of Physics D: Applied Physics 1992 25 1 A236 A239 2-s2.0-0026622450
113. Leadbeater G., Noble B., Waterhouse R., The fatigue of an aluminium alloy produced by fretting on a shot peened surface. Advances in Fracture Research 1986 3 2125 2132
114. Gould A. J., Boden P. J., Harris S. J., Phosphorus distribution in electroless nickel deposits. Surface Technology 1981 12 1 93 102 2-s2.0-0018907759
115. Gao H., Gu H., Zhou H., Sliding wear and fretting fatigue resistance of amorphous Ni-P coatings. Wear 1991 142 2 291 301 2-s2.0-0026117901
116. Bryggman U., Söderberg S., Contact conditions and surface degradation mechanisms in low amplitude fretting. Wear 1988 125 1-2 39 52 2-s2.0-0024045071 (Pubitemid 18653301)
117. Zalnezhad E., Sarhan A. A. D. M., Hamdi M., Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing 2012 13 8 1453 1459 2-s2.0-84863888302 10.1007/s12541-012-0191-3
118. Majzoobi G. H., Hojjati R., Nematian M., Zalnejad E., Ahmadkhani A. R., Hanifepoor E., A new device for fretting fatigue testing. Transactions of the Indian Institute of Metals 2010 63 2-3 493 497 2-s2.0-79958295185
119. Zalnezhad E., Sarhan A. A. D. M., Hamdi M., Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing 2013 14 3 467 473 2-s2.0-84875947120 10.1007/s12541-013-0063-5
120. Mohseni E., Zalnezhad E., Bushroa A. R., Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: a review paper. International Journal of Adhesion and Adhesives 2014 48 238 257 10.1016/j.ijadhadh.2013.09.030
121. Zalnezhad E., Sarhan A. A. D., Hamdi M., A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. International Journal of Advanced Manufacturing Technology 2013 68 415 423 2-s2.0-84872063438 10.1007/s00170-013-4738-y
122. Farhan M. S., Zalnezhad E., Bushroa A. R., Sarhan A. A. D., Electrical and optical properties of indium-tin oxide (ITO) films by ion-assisted deposition (IAD) at room temperature. International Journal of Precision Engineering and Manufacturing 2013 14 8 1465 1469 2-s2.0-84881228950 10.1007/s12541-013-0197-5
123. 2 nanotube arrays. Journal of the Mechanical Behavior of Biomedical Materials 2013 20 272 282 2-s2.0-84875889904 10.1016/j.jmbbm.2013.01.020
124. Sarhan A. A. D., Zalnezhad E., Hamdi M., The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering A 2012 1 23 40 2-s2.0-84867305283 10.1016/j.msea.2012.09.082
125. Zalnezhad E., Sarhan A. A. D., Hamdi M., A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. International Journal of Advanced Manufacturing Technology 2014 49 256 265 2-s2.0-84872063438 10.1007/s00170-013-4738-y
126. 2 nanotubular array coating for biomedical application. Metallurgical and Materials Transactions A 2014 45 785 797 10.1007/s11661-013-2043-x
127. Goudarzi S., Khojier K., Savaloni H., Zalnezhad E., On the dependence of mechanical and tribological properties of sputtered chromium nitride thin films on deposition power. Advanced Materials Research 2014 829 352 356
128. 2 thin films. International Journal of Precision Engineering and Manufacturing 2013 14 1997 2002 10.1007/s12541-013-0271-z
129. Zalnezhad E., Sarhan A. A. D., Hamdi M., Fretting fatigue life evaluation of multilayer Cr-CrN-coated Al7075-T6 with higher adhesion strength-fuzzy logic approach. International Journal of Advanced Manufacturing Technology 2013 69 1153 1164 2-s2.0-84878709214 10.1007/s00170-013-5093-8
130. 5 thin films prepared by ion-assisted deposition. Materials Research Bulletin 2013 48 10 4206 4209 2-s2.0-84882240849 10.1016/j.materresbull.2013.06.068
131. Zalnezhad E., Sarhan A. A. D., Hamdi M., Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application. International Journal of Advanced Manufacturing Technology 2013 68 453 464 2-s2.0-84873374625 10.1007/s00170-013-4743-1
132. Zalnezhad E., Sarhan A. A. D., Jahanshahi P., A new fretting fatigue testing machine design, utilizing rotating-bending principle approach. The International Journal of Advanced Manufacturing Technology 2014 70 2211 2219 10.1007/s00170-013-5457-0
133. Zalnezhad E., Sarhan A. A. D., Hamdi M., Adhesion strength predicting of Cr/CrN coated Al7075 using fuzzy logic system for fretting fatigue life enhancement. 1 Proceedings of the World Congress on Engineering and Computer Science 2013 2 8
134. Zalnezhad E., Ahmed Sarhan A. D., Multilayer thin film CrN coating on aerospace AL7075-T6 alloy for surface integrity enhancement. The International Journal of Advanced Manufacturing Technology 2014 72 1491 1502 10.1007/s00170-014-5757-z