Laser-Assisted Additive Manufacturing for Metallic Biomedical Scaffolds

Comprehensive Materials Processing

Volumn 10, Issue , 2014, Pages 285-301

  Riza, S H ^a   Masood, S H ^a   Wen, C ^a  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

Author keywords

Additive manufacturing; Biocompatibility; DMD; Laser assisted manufacturing; LENS; Metallic scaffolds; Porosity; SLM; SLS; Surface engineering; Tissue engineering

Indexed keywords

3D PRINTERS; ADDITIVES; BIOCOMPATIBILITY; LENSES; METALS; POROSITY; SCAFFOLDS (BIOLOGY); TISSUE; TISSUE ENGINEERING;

GROWTH AND DEVELOPMENT; LASER ASSISTED MANUFACTURING; LASER-ASSISTED; LASER-BASED ADDITIVE MANUFACTURING; LASER-BASED SYSTEMS; LASER-BASED TECHNOLOGIES; METALLIC IMPLANTS; SURFACE ENGINEERING;

SCAFFOLDS;

EID: 84903494743     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-096532-1.01017-7     Document Type: Chapter

References (98)

1. Godbey W.T., Atala A. In Vitro Systems for Tissue Engineering. Ann. N. Y. Acad. Sci. 2002, 961:10-26.
2. Vacanti C.A. History of Tissue Engineering and a Glimpse into Its Future. Tissue Eng. 2006, 12(5):1137-1142.
3. Meyer U., Meyer T., Handschel J., Wiesmann H.P. Fundamentals of Tissue Engineering and Regenerative Medicine 2009, Springer-Verlag.
4. Mooney D.J., Baldwin D.F., Suh Nam P., Vacanti J.P., Langer R. Novel Approach to Fabricate Porous Sponges of Poly(d, l-lactic-co-glycolic acid) without the Use of Organic Solvents. Biomaterials 1996, 17(14):1417-1422.
5. Hutmacher D.W. Scaffolds in Tissue Engineering Bone and Cartilage. Biomaterials 2000, 21:2529-2543.
6. Hutmacher D.W., Schantz T., Zein I., Ng Kee Woei, Teoh S.H., Tan K.C. Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated via Fused Deposition Modelling. J. Biomed. Mater. Res. 2001, 55(2).
7. Hollister S.J. Hierarchical Bioactive Materials for Tissue Reconstruction: Integrated Design and Manufacturing Challenges. J. Miner. Met. Mater. Soc. 2011, 63(4):56-65.
8. Williams D.F. The Williams Dictionary of Biomaterials 1999, Liverpool University Press, United Kingdom.
9. Ratner B.D., Hoffman A.S., Schoen F.J., Lemons J.E. Biomaterials Science: A Multidisciplinary Endeavour. Biomaterials Science 2004, 1-9. Elsevier Academic Press, CA. B.D. Ratner (Ed.).
10. Huebsch N., Mooney D.J. Inspiration and Application in the Evolution of Biomaterials. Nature 2009, 462:426-432.
11. Ratner B.D., Bryant S.J. Biomaterials: Where We Have Been and Where We Are Going. Annu. Rev. Biomed. Eng. 2004, 6:41-75.
12. Williams D.F. On the Mechanisms of Biocompatibility. Biomaterials 2008, 1-13.
13. Wirsching K., Lehle K., Jacob P., Gleich O., Strutz J., Kwok P. Influence of Surface Processing on the Biocompatibility of Titanium. Materials 2011, 4:1238-1248.
14. Niinomi M. Fatigue Performance and Cyto-toxicity of Low Rigidity Titanium Alloy Ti-29Nb-13Ta-4.6Zr. Biomaterials 2003, 24:2673-2683.
15. Staiger M.P., Pietak A.M., Huadmai J., Dias G. Magnesium and Its Alloys as Orthopaedic Biomaterials: A Review. Biomaterials 2006, 27(9):1728-1734.
16. Lhotka C., Szekeres T., Steffan I., Zhuber K., Zweymuller K. Four-Year Study of Cobalt and Chromium Blood Levels in Patients Managed with Two Different Metal-on-Metal Total Hip Replacements. J. Orthop. Res. 2003, 21(2):189-195.
17. Habibovic P., Yuan H., van der Valk C.M., Meijer G., van Blitterswijk C.A., Groot Klaas de 3D Microenvironment as Essential Element for Osteoinduction by Biomaterials. Biomaterials 2005, 26:3565-3575.
18. Hollister S.J., Maddox R.D., Taboas J.M. Optimal Design and Fabrication of Scaffolds to Mimic Tissue Properties and Satisfy Biological Constraints. Biomaterials 2002, 23:4095-4103.
19. Jones A.C., Arns C.H., Sheppard A.P., Hutmacher D.W., Milthorped B.K., Knackstedt M.A. Assessment of Bone Ingrowth into Porous Biomaterials Using MICRO-ct. Biomaterials 2007, 28:2491-2504.
20. Jones A.C., Arns C.H., Sheppard A.P., Hutmacher D.W., Milthorped B.K., Knackstedt M.A. The Correlation of Pore Morphology, Interconnectivity and Physical Properties of 3D Ceramic Scaffolds with Bone Ingrowth. Biomaterials 2009, 30:1440-1451.
21. Bai F., Wang Z., Lu J.X., Liu J., Chen G.Y., Lv R., Wang J., Lin J.K., Huang Z.X. The Correlation between the Internal Structure and Vascularization of Controllable Porous Bio Ceramic Materials In Vivo: A Quantitative Study. Tissue Eng. 2010, 16-A(12).
22. Sercombe T., Jones N., Day R., Kop A. Heat Treatment of Ti-6Al-7Nb Components Produced by Selective Laser Melting. Rapid Prototyping J. 2008, 14(5):300-304.
23. Karageorgiou V., Kaplan D. Review - Porosity of 3D Biomaterial Scaffolds and Osteogenesis. Biomaterials 2005, 26:5474-5491.
24. Gibson L.J. Biomechanics of Cellular Solids. J. Biomech. 2005, 38:377-399.
25. Cai S., Xi J. A Control Approach for Pore Size Distribution in the Bone Scaffold Based on the Hexahedral Mesh Refinement. Comput.-Aided Des. 2008, 40:1040-1050.
26. Lin C.Y., Kikuchi N., Hollister S.J. A Novel Method for Biomaterial Scaffold Internal Architecture Design to Match Bone Elastic Properties with Desired Porosity. J. Biomech. 2004, 37:623-636.
27. Hollister S.J., Lin C.Y., Saito E., Schek R.D., Taboas J.M., Williams J.M., Partee B., Flanagan C.L., Diggs A., Wilke A.N., Van Lenthe G.H., Mueller R., Wirtz T., Das S., Feinberg S.E., Krebsbach P.H. Engineering Craniofacial Scaffolds. Orthod. Craniofacial Res. 2005, 8:162-173.
28. Gibson L.J. Cellular Materials in Nature and Medicine 2010, Cambridge University Press, Cambridge.
29. Mair L.H., Stolarski T.A., Vowles R.W., Lloyd C.H. Wear: Mechanisms, Manifestations and Measurement. Report of a Workshop. J. Dent. 1996, 24(1-2):141-148.
30. Gispert M.P., Serro A.P., Colaco R., Saramago B. Friction and Wear Mechanisms in Hip Prosthesis: Comparison of Joint Materials Behaviour in Several Lubricants. Wear 2006, 260:149-158.
31. Fang Z., Starley B., Sun W. Computer-Aided Characterization for Effective Mechanical Properties of Porous Tissue Scaffolds. Comput.-Aided Des. 2005, 37(1):65-72.
32. Hutmacher D.W. Scaffold Design and Fabrication Technologies for Engineering Tissues - State of the Art and Future Perspectives. J. Biomater. Sci. Polym. Ed. 2001, 12(1):107-124.
33. Yang S., Leong K., Du Z., Chua C.K. The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques. Tissue Eng. 2002, 8(1):1-11.
34. Giannatsis J., Dedoussis V. Additive Fabrication Technologies Applied to Medicine and Health Care: a Review. Int. J. Adv. Manuf. Technol. 2009, 40:116-127.
35. Gibson I., Cheung L.K., Chow S.P., Cheung W.L., Beh S.L., Savalani M., Lee S.H. The Use of Rapid Prototyping to Assist Medical Applications. Rapid Prototyping J. 2006, 12(1):53-58.
36. Truscott M., Beer Deon de, Vicatos G., Hosking K., Schuur G., Palotti V., Barnard L., Booysen G., Campbell R.I. Using RP to Promote Collaborative Design of Customised Medical Implants. Rapid Prototyping J. 2007, 13(2):107-114.
37. Williams J.M., Adewunmi A., Schek R.M., Flanagan C.L., Krebsbach P.H., Feinberg S.E., Hollister S.J., Das S. Bone Tissue Engineering Using Polycaprolactone Scaffolds Fabricated via Selective Laser Sintering. Biomaterials 2005, 26:4817-4827.
38. Eustice, C. Decreasing Joint Load May Help Knee Osteoarthritis. http://osteoarthritis.about.com/od/osteoarthritisresearch/a/Joint-Load-And-Osteoarthritis.htm.
39. Park J., Lakes R.S. Biomaterials: An Introduction 2007, Springer, New York. 3rd ed.
40. Au A.G., Raso V.J., Liggins A.B., Amirfazli A. Contribution of Loading Conditions and Material Properties to Stress Shielding Near the Tibial Component of Total Knee Replacements. J. Biomech. 2007, 40:1410-1416.
41. Bansiddhi A., Sargeant T.D., Stupp S.I., Dunand D.C. Porous NiTi for Bone Implants: A Review. Acta Biomater. 2008, 4:773-782.
42. Krishna B.V., Bose S., Bandyopadhyay A. Low Stiffness Porous Ti Structures for Load-Bearing Implants. Acta Biomater. 2007, 3:997-1006.
43. Gibson I., Shi D. Material Properties and Fabrication Parameters in Selective Laser Sintering Process. Rapid Prototyping J. 1997, 3(4):129-136.
44. Berry E., Brown J.M., Connell M., Craven C.M., Efford N.D., Radjenovic A., Smith M.A. Preliminary Experience with Medical Applications of Rapid Prototyping by Selective Laser Sintering. Med. Eng. Phys. 1997, 19(1):90-96.
45. Wiria F.E., Chua C.K., Leong K.F., Quah Z.Y., Chandrasekaran M., Lee M.W. Improved Bio-Composite Development of Poly-Vinyl Alcohol and Hydroxyapatite for Tissue Engineering Scaffold Fabrication Using Selective Laser Sintering. J. Mater. Sci. Mater. Med. 2008, 19(3):989-996.
46. Eshraghi S., Das S. Mechanical and Microstructural Properties of Polycaprolactone Scaffolds with One-Dimensional, Two-Dimensional, and Three-Dimensional Orthogonally Oriented Porous Architectures Produced by Selective Laser Sintering. Acta Biomater. 2010, 6:2467-2476.
47. Kruth J.P., Mercelis P., Vaerenbergh J.V. Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting. Rapid Prototyping J. 2005, 11(1):26-36.
48. Zhou W.Y., Lee S.H., Wang M., Cheung W.L., Yuk Ip W. Selective Laser Sintering of Porous Tissue Engineering Scaffolds from Poly(l-lactide)/carbonated Hydroxyapatite Nanocomposite Microspheres. J. Mater. Sci. Mater. Med. 2008, 19:2535-2540.
49. Wang X.C., Laoui T., Bonse J., Kruth J.P., Lauwers B., Froyen L. Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation. Int J. Adv. Manuf. Technol. 2002, 19:351-357.
50. Partee B., Hollister S.J., Das S. Selective Laser Sintering Process Optimization for Layered Manufacturing of Polycaprolactone Bone Tissue Engineering Scaffolds. J. Manuf. Sci. Eng. 2006, 128:531-540.
51. Faustini M.C., Neptune R.R., Crawford R.H., Stanhope S.J. Manufacture of Passive Dynamic Ankle-foot Orthoses Using Selective Laser Sintering. IEEE Trans. Biomed. Eng. 2008, 55(2).
52. Morgan R.H., Papworth A.J., Sutcliffe C., Fox P., O'Neill W. High Density Net Shape Components by Direct Laser Re-Melting of Single-Phase Powders. J. Mater. Sci. 2002, 37:3093-3100.
53. Wehmoller M., Warnke P.H., Zilian C., Eufinger H. Implant Design and Production - A New Approach by Selective Laser Melting. Int. Congr. Ser. 2005, 1281:690-695.
54. Yadroitsev I., Smurov I. Selective Laser Melting Technology: from the Single Laser Melted Track Stability to 3D Parts of Complex Shape. Phys. Procedia 2010, 5:551-560.
55. Yadroitsev I., Smurov I. Surface Morphology in Selective Laser Melting of Metal Powders. Phys. Procedia 2011, 12:264-270.
56. Vandenbroucke B., Kruth J.P. Selective Laser Melting of Biocompatible Metals for Rapid Manufacturing of Medical Parts. Rapid Prototyping J. 2007, 13(4):196-203.
57. Stamp R., Fox P., O'Neill W., Jones E., Sutcliffe C. The Development of a Scanning Strategy for the Manufacture of Porous Biomaterials by Selective Laser Melting. J. Mater. Sci. Mater. Med. 2009, 20:1839-1848.
58. Warnke P.H., Douglas T., Wollny P., Sherry E., Steiner M., Galonska S., Becker S.T., Springer I.N., Wiltfang J., Sivananthan S. Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering. Tissue Eng. C 2009, 15(2).
59. Lin C.Y., Wirtz T., LaMarca F., Hollister S.J. Structural and Mechanical Evaluations of a Topology Optimized Titanium Interbody Fusion Cage Fabricated by Selective Laser Melting Process. J. Biomed. Mater. Res. 2007, 83 A:272-279.
60. Uklejewski R., Winiecki M., Rogala P., Mielniczuk J. Selective Laser Melted Prototype of Original Minimally Invasive Resurfacing Hip Endoprosthesis. Rapid Prototyping J. 2011, 17(1):76-85.
61. Griffith M.L., Keicher D.M., Atwood C.L., Romero J.A., Smugeresky E., Harwell L.D., Greene D.L. Free Form Fabrication of Metallic Components Using Laser Engineered Net Shaping (LENS) 1996, Sandia National Laboratories, Austin.
62. Atwood C., Griffith M., Harwell L., Schlienger E., Ensz M., Smugeresky J., Romero T., Greene D., Reckaway D. Laser Engineered Net Shaping (LENS) - A Tool for Direct Fabrication of Metal Parts 1998, Sandia National Laboratories, Orlando, FL.
63. Liu W., DuPont J.N. Fabrication of Functionally Graded TiC/Ti Composites by Laser Engineered Net Shaping. Scr. Mater. 2003, 48:1337-1342.
64. Bandyopadhyay A., Krishna B.V., Xue W., Bose S. Application of Laser Engineered Net Shaping (LENS) to Manufacture Porous and Functionally Graded Structures for Load Bearing Implants. J. Mater. Sci. Mater. Med. 2009, 20:S29-S34.
65. Janaki Ram G.D., Esplin C.K., Stucker B.E. Microstructure and Wear Properties of LENS Deposited Medical Grade CoCrMo. J. Mater. Sci. Mater. Med. 2008, 19:2105-2111.
66. 2 Structures Using Laser Engineered Net Shaping (LENS). Acta Biomater. 2009, 5:1831-1837.
67. http://www.pomgroup.com.
68. Bhattacharya S., Dinda G.P., Dasgupta A.K., Mazumder J. Microstructural Evolution of AISI 4340 Steel during Direct Metal Deposition Process. Mater. Sci. Eng. 2011, 528:2309-2318.
69. Dutta B., Palaniswamy S., Choi J., Song L.J., Mazumder J. Additive Manufacturing by Direct Metal Deposition. Adv. Mater. Process. 2011, 169(5):33-36.
70. Mazumder J., Dutta D., Kikuchi N., Ghosh A. Closed Loop Direct Metal Deposition: Art to Part. Opt. Lasers Eng. 2000, 34:397-414.
71. Dinda G.P., Dasgupta A.K., Mazumder J. Laser Aided Direct Metal Deposition of Inconel 625 Superalloy: Microstructural Evolution and Thermal Stability. Mater. Sci. Eng. A 2009, 509:98-104.
72. Mazumder J., Schifferer A., Choi J. Direct Materials Deposition: Designed Macro and Microstructure. Mater. Res. Innovations 1999, 3:118-131.
73. Jang J.H., Joo B.D., Mun S.M., Sung M.Y., Moon Y.H. Application of Direct Laser Melting to Restore Damaged Steel Dies. Met. Mater. Int. 2011, 17:167-174.
74. Dinda G.P., Song L., Mazumder J. Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition. Metall. Mater. Trans. 2008, 39A:2914-2922.
75. Hench L.L. Biomaterials. Science 1980, 208(4446):826-831.
76. Lemons J.E. Biomaterials, Biomechanics, Tissue Healing and Immediate Function Dental Implants. J. Oral Implantol. 2004, 30(5):318-324.
77. Anderson J.M., Rodriguez A., Chang D.T. Foreign Body Reactions to Biomaterials. Semin. Immunol. 2008, 20(2):86-100.
78. Sundfeld M., Carlsson L.V., Johansson C.B., Thomsen P., Gretzer C. Aseptic Loosening, Not Only a Question of Wear: A Review of Different Theories. Acta Orthop. 2006, 77(2):177-197.
79. Witzleb W.C., Ziegler J., Krummenauer F., Neumeister V., Guenther K.P. Exposure to Chromium, Cobalt and Molybdenum from Metal-on-metal Total Hip Replacement and Hip Resurfacing Arthroplasty. Acta Orthop. 2006, 77(5):697-705.
80. Arango S., Vargas A.P., García C. Review: Coating and Surface Treatments on Orthodontic Metallic Materials. Coatings 2013, 3:1-15.
81. Li L.H., Kim H.W., Lee S.H., Kong Y.M., Kim H.E. Biocompatibility of Titanium Implants Modified by Micro-arc Oxidation and Hydroxyapatite Coating. J. Biomed. Mater. Res. 2005, 73A(1):48-54.
82. Nayar S., Pramanick A.K., Sharma B.K., Mishra R.K., Bansal S.K., Prajapati A., Sahu K.K., Das S.K., Pathak L., Sinha A. Hydroxyapatite Coating on Stainless Steel Pre-coated with Bovine Serum Albumin at Ambient Conditions. Colloids Surf. B 2006, 48:183-187.
83. Campbell A.A. Bioceramics for Implant Coatings. Mater. Today Nov. 2003, 26-30.
84. Huang J., Best S.M., Bonfield W., Buckland T. Development and Characterization of Titanium-containing Hydroxyapatite for Medical Applications. Acta Biomater. 2010, 6:241-249.
85. Kikuchi M., Suetsugu Y., Tanaka J., Akao M. Preparation and Mechanical Properties of Calcium Phosphate/Copoly-l-lactide Composites. J. Mater. Sci. Mater. Med. 1997, 8:361-364.
86. Li X., Liu X., Huang J., Fan Y., Cui F.Z. Biomedical Investigation of CNT Based Coatings. Surf. Coat. Technol. 2011, 206:759-766.
87. Bosco R., Van Den Beucken J., Leeuwenburgh S., Jansen J. Surface Engineering for Bone Implants: a Trend from Passive to Active Surfaces. Coatings 2012, 2:95-119.
88. Meng Q., Geng L., Ni D. Laser Cladding NiCoCrAlY Coating on Ti-6Al-4V. Mater. Lett. 2005, 59:2774-2777.
89. Cheng G.J., Pirzada D., Cai M., Mohanty P., Bandyopadhyay A. Bioceramic Coating of Hydroxyapatite on Titanium Substrate with Nd-YAG Laser. Mater. Sci. Eng. C 2005, 25:541-547.
90. Roy M., Bandyopadhyay A., Bose S. Laser Surface Modification of Electrophoretically Deposited Hydroxyapatite Coating on Titanium. J. Am. Ceram. Soc. 2008, 91(11):3517-3521.
91. Krishna B.V., Xue W., Bose S., Bandyopadhyay A. Functionally Graded Co-Cr-Mo Coating on Ti6Al4V Alloy Structures. Acta Biomater. 2008, 4:697-706.
92. Balla V.K., Banerjee S., Bose S., Bandyopadhyay A. Direct Laser Processing of a Tantalum Coating on Titanium for Bone Replacement Structures. Acta Biomater. 2010, 6:2329-2334.
93. Vorobyev A.Y., Guo C. Femtosecond Laser Surface Structuring of Biocompatible Metals, Commercial and Biomedical Applications of Ultrafast Lasers IX. Proc. SPIE 2009, Vol. 7203.
94. Jeong Y.H., Choe H.C., Brantley W.A., Sohn I.B. Hydroxyapatite Thin Film Coatings on Nanotube-Formed Ti-35Nb-10Zr Alloys after Femtosecond Laser Texturin. Surf. Coat. Technol. 2013, 217:13-22.
95. Hayashi T., Maekawa K., Tamura M., Hanyu K. Selective Laser Sintering Method Using Titanium Powder Sheet towards Fabrication of Porous Bone Substitutes. JSME Int. J., Ser. A 2005, 48(4):369-375.
96. Yasa E., Kruth J.P. Microstructural Investigation of Selective Laser Melting 316L Stainless Steel Parts Exposed to Laser Re-melting. Procedia Eng. 2011, 19:389-395.
97. Peyre P., Aubry P., Fabbro R., Neveu R., Longuet A. Analytical and Numerical Modelling of the Direct Metal Deposition Laser Process. J. Phys. D Appl. Phys. 2008, 41:025403.
98. Qi H., Mazumder J., Ki H. Numerical Simulation of Heat Transfer and Fluid Flow in Coaxial Laser Cladding Process for Direct Metal Deposition. J. Appl. Phys. 2006, 100:024903.