Selective laser melted prototype of original minimally invasive resurfacing hip endoprosthesis

Rapid Prototyping Journal

Volumn 17, Issue 1, 2011, Pages 76-85

  Uklejewski, Ryszard ^a,b   Winiecki, Mariusz ^a   Rogal, Piotr ^a,c   Mielniczuk, Janusz ^b  

^a KAZIMIERZ WIELKI UNIVERSITY   (Poland)

^b POZNAN UNIVERSITY OF TECHNOLOGY   (Poland)

^c POZNAN UNIVERSITY OF MEDICAL SCIENCES   (Poland)

Author keywords

Advanced manufacturing technologies; Limbs; Orthopaedics; Prosthetic devices

Indexed keywords

ADVANCED MANUFACTURING TECHNOLOGIES; CLINICAL FAILURE; COMPUTER AIDED DESIGN MODELS; DESIGN/METHODOLOGY/APPROACH; ENDOPROSTHESES; ENDOPROSTHESIS; GERMANY; HIP ARTHROPLASTIES; HIP ENDOPROSTHESIS; INTERDIGITATIONS; LIMBS; MACHINING TECHNOLOGY; MANUFACTURING PROCESS; MANUFACTURING QUALITY; MECHANICAL TESTS; METAL MANUFACTURING; MICRO-STRUCTURAL; MICROSCOPIC EVALUATION; MINIMALLY INVASIVE; NUMBER OF SAMPLES; ORTHOPAEDICS; POTENTIAL RISKS; PROSTHETIC DEVICES; PROTOTYPING; RESEARCH NEEDS; SEM;

ARTIFICIAL LIMBS; COMPUTER AIDED DESIGN; OPTIMIZATION; ORTHOPEDICS; RESEARCH; SCAFFOLDS; TECHNOLOGY;

MANUFACTURE;

EID: 79551489809     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552541111098653     Document Type: Article

References (54)

1. Abousleiman, Y.N., Cheng, A.H.D. and Ulm, F.J. (Eds) (2005), Poromechanics - Biot Centenial, Balkema, Amsterdam.
2. Amstutz, H.C. and Le Duff, M.J. (2008), "Eleven years of experience with metal-on-metal, a review of 1, 000 conserve plus", Journal of Arthropod, Vol. 23 No. 6, pp. S36-S43.
3. Amstutz, H.C., Campbell, P.A. and Le Duff, M.J. (2004), "Fracture of the neck of the femur after surface arthroplasty of the hip", Journal of Bone and Joint Surgery, American Volume, Vol. 86, pp. 1874-7.
4. Beaule, P.E., Ganz, R. and Leunig, M. (2008), "Blood flow to the femoral head and hip resurfacing arthroplasty", Der Orthopäde, Vol. 37, pp. 659-66 (in German).
5. Benazzo, F., Falez, F. and Dietrich, M. (2006), Bioceramics and Alternative Bearings in Joint Arthroplasty, Steinkopff Verlag, Darmstadt.
6. Cowin, S. (1999), "Bone poroelasticity", Journal of Biomechanics, Vol. 32, pp. 217-38.
7. Daniel, J., Pynsent, P.B. and McMinn, D.J.W. (2004), "Metal-on-metal resurfacing of the hip in patients under the age of 55 years with osteoarthritis", Journal of Bone and Joint Surgery, British, Vol. 86, pp. 177-84.
8. Facchini, L., Magalini, E., Robotti, P. and Molinari, A. (2009), "Microstructure and mechanical properties of Ti-6Al-4V produced by electron beam melting of pre-alloyed powders", Rapid Prototyping Journal, Vol. 15, pp. 171-8.
9. Fox, P., Pogson, S., Sutcliffe, C. and Jones, E. (2008), "Interface interactions between porous titanium/tantalum coatings, produced by selective laser melting (SLM), on a cobalt-chromium alloy", Surface and Coatings Technology, Vol. 202, pp. 5001-7.
10. Gibson, I. (Ed.) (2005), Advanced Manufacturing Technology for Medical Applications, Wiley, London.
11. Gibson, I., Cheung, L.K., Chow, S.P., Cheung, W.L., Beh, S.L., Savalani, M. and Lee, S.H. (2006), "The use of rapid prototyping to assist medical applications", Rapid Prototyping Journal, Vol. 12, pp. 53-8.
12. Hieu, L.C., Bohez, E., Vander Sloten, J., Phien, H.N., Vatcharaporn, E., Binh, P.H., An, P.V. and Oris, P. (2003), "Design for medical rapid prototyping of cranioplasty implants", Rapid Prototyping Journal, Vol. 9, pp. 175-86.
13. Hieu, L.C., Zlatov, N., Vander Sloten, J., Bohez, E., Khanh, L., Binh, P.H., Oris, P. and Toshev, Y. (2005), "Medical rapid prototyping applications and methods", Assembly Automation, Vol. 25, pp. 284-92.
14. Hoeges, S., Lindner, M., Fischer, H., Meiners, W. and Wissenbach, K. (2008), "Manufacturing of bone substitute implants using selective laser melting", in Vander Sloten, J., Verdonck, P., Nyssen, M. and Haueisen, J. (Eds), ECIFMBE 2008, IFMBE Proceedings, Vol. 22, pp. 2230-4.
15. Hollander, D.A., Wirtz, T., Von Walter, M., Linker, R., Schultheis, A. and Paar, O. (2003), "Development of individual three-dimensional bone substitutes using SLM", European Journal of Trauma, Vol. 4, pp. 228-34.
16. Howald, R., Kesteris, U., Klabunde, R. and Krevolin, J. (2006), "Factors affecting the cement penetration of a hip resurfacing implant: an in vitro study", Hip International, Vol. 16, Suppl. 4, pp. S82-9.
17. Howie, D.W., Cornish, B.L. and Vernon-Roberts, B. (1990), "Resurfacing hip arthroplasty. Classification of loosening and the role of prosthesis wear particles", Clinical Orthopaedics and Related Research, Vol. 225, pp. 144-59.
18. Kim, P.R., Beaule, P.E., Laflamme, G.Y. and Dunbar, M. (2008), "Causes of early failure in a multicenter clinical trial of hip resurfacing", Journal of Arthropod, Vol. 23 No. 6, pp. S44-9, Suppl. 1.
19. Kruth, J.-P., Mercelis, P. and Van Vaerenbergh, J. (2005), "Binding mechanism in selective laser sintering and selective laser melting", Rapid Prototyping Journal, Vol. 11, pp. 26-36.
20. Ling, H.I., Smyth, A. and Betti, R. (Eds) (2009), Poromechanics IV, DEStech Publications, Lancaster, PA.
21. Long, M. and Rack, H.J. (1998), "Titanium alloys in total joint replacement - a materials science perspective", Biomaterials, Vol. 19, pp. 1621-39.
22. Marker, D.R., Seyler, T.M., Jinnah, R.H., Delanois, R.E., Ulrich, S.D. and Mont, M.A. (2007), "Femoral neck fractures after metal-on-metal", Journal of Arthropod, Vol. 22 No. 7, pp. S66-S71.
23. Mielniczuk, J. (2000), "Plasticity of Porous Materials", Theory and the Limit Load Capacity, Poznan University of Technology, Poznan.
24. Mielniczuk, J., Uklejewski, R., Winiecki, M. and Rogala, P. (2006), "The poroparameters for evaluation of structural-osteoinductive and mechanical properties of bone-implant porous coating interface. Part 1. Theoretical background on the basis of the poroelastic model of bone", Journal of Biomechanics, Vol. 39, Suppl. 1, p. S14.
25. Milz, S. and Putz, R. (1994), "Quantitative morphology of subchondral plate of tibial plateau", Journal of Anatomy, Vol. 185, pp. 103-10.
26. Morgan, D., Myers, G., O'Dwyer, K. and Thomas, A.M. (2008), "Intertrochanteric fracture below Birmingham hip resurfacing successful non-operative management in two cases", Injury Extra, Vol. 39, pp. 313-5.
27. Murr, L.E., Esquivel, E.V., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Martinez, E.Y., Medina, F., Hernandez, D.H., Martinez, E., Martinez, J.L., Stafford, S.W., Brown, D.K., Hoppe, T., Meyers, W., Lindhe, W. and Wicker, W. (2009a), "Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V", Mater. Character., Vol. 60, pp. 96-105.
28. Murr, L.E., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Rodela, A., Martinez, E.Y., Hernandez, D.H., Martinez, E., Medina, F. and Wicker, R.B. (2009b), "Microstructure and mechanical behavior of Ti6Al4V produced by rapid-layer manufacturing, for bio-medical applications", Journal of Mechanical Behavior Biomedical Materials, Vol. 2, pp. 20-32.
29. Pollard, T.C.B., Basu, C., Ainsworth, R., Lai, W. and Bannister, G.C. (2003), "Is the Birmingham hip resurfacing worthwhile?", Hip International, Vol. 13, pp. 25-8.
30. Rogala, P. (1999a), European Patent nr 072418 B1: Endoprosthesis.
31. Rogala, P. (1999b), US Patent nr 5, 91, 759: Acetabulum endoprosthesis and head.
32. Rogala, P. (2002), Canadian Patent nr 2, 200, 064: Method and endoprosthesis to apply this implantation.
33. Rogala, P. and Uklejewski, R. (2006a), "Needle-palisade fixation for total resurfacing arthroplasties of hip and other joints - Biomechanical principles", in Liepsch, D. (Ed.), 5th World Congress of Biomechanics - Volume of Selected Papers, Medimond, Bologna, pp. 147-51.
34. Rogala, P. and Uklejewski, R. (2006b), "Needle-palisade fixation for total resurfacing arthroplasties of hip and other joints - Biomechanical principles", Journal of Biomechanics, Vol. 39, Suppl. 1, p. S513.
35. Rogala, P., Uklejewski, R. and Stryla, W. (2002a), "Modern poroelastic biomechanical model of bone tissue. Part 1. Biomechanical function of fluids in bone", Chir Narzadow Ruchu Ortop Pol., Vol. 67, pp. 309-16 (in Polish).
36. Rogala, P., Uklejewski, R. and Stryla, W. (2002b), "Modern poroelastic biomechanical model of bone tissue. Part 2 Structure of pore space in cortical and trabecular bone", Chir narzadow ruchu I ortopedia polska, Vol. 67, pp. 395-403 (in Polish).
37. Rogala, P., Uklejewski, R. and Stryla, W. (2007), "New needle-palisade technology for hip and other joints endoprostheses fixation", Implications for postoperative rehabilitation, International Journal of Rehabilitation Research, Vol. 30, Suppl. 1, pp. 57-8.
38. Santos, E.C., Shiomi, M., Osakada, K. and Laoui, T. (2006), "Rapid prototyping of metal components by laser forming", International Journal of Machine and Tools Manufacture, Vol. 46, pp. 1459-68.
39. Sercombe, T., Jones, N., Day, R. and Kop, A. (2008), "Heat treatment of Ti-6Al-7Nb components produced by selective laser melting", Rapid Prototyping Journal, Vol. 14, pp. 300-4.
40. Shimmin, A.J. and Back, D. (2005), "Femoral neck fractures following Birmingham hip resurfacing: a national review of 50 cases", Journal of Bone Joint Surgery, British, Vol. 87, pp. 463-4.
41. Singare, S., Yaxiong, L., Dichen, L., Bingheng, L., Sanhu, H. and Gang, L. (2006), "Fabrication of customized maxillofacial prosthesis using computer-aided design and rapid prototyping techniques", Rapid Prototyping Journal, Vol. 12, pp. 206-13.
42. Spencer, S., Carter, R., Murray, H. and Meek, R.M.D. (2008), "Femoral neck narrowing after metal-on-metal hip resurfacing", Journal of Arthropod, Vol. 23, pp. 1105-9.
43. Stryla, W., Uklejewski, R. and Rogala, P. (2004a), "Modern two-phase biomecha-electrophysiological model of bone tissue. Implications for rehabilitation research and practice", International Journal of Rehabilitation Research, Vol. 27, Suppl. 1, pp. 175-7.
44. Stryla, W., Uklejewski, R. and Rogala, P. (2004b), "Modern two-phase biomecha-electrophysiological model of bone tissue. Implication for orthopaedic rehabilitation reseach and practice", in Marincek, C. and Burger, H. (Eds), Rehabilitation Sciences in the New Millenium. Challenge for Multidisciplinary Research, Medimond, Bologna, pp. 231-5.
45. Uklejewski, R. (1992), "Bone as porous medium filled with fluid", IFTR, Polish Academic of Sciences, Vol. 16 (in Polish).
46. Uklejewski, R., Winiecki, M. and Rogala, P. (2006), "On the structural-adaptive compatibility of bone with porous coated implants on the base of the traditional one-phase and the modern two-phase poroelastic biomechanical model of bone tissue", Engineering of Biomaterials, Vol. 9 Nos 54-55, pp. 1-3.
47. Uklejewski, R., Winiecki, M., Mielniczuk, J., Rogala, P. and Auguscinski, A. (2008a), "The poroaccessibility parameters for three-dimensional characterization of orthopedic implants porous coatings", Metrology and Measurement Systems, Vol. 15, pp. 215-26.
48. Uklejewski, R., Winiecki, M., Rogala, P., Mielniczuk, J., Auguscinski, A. and Stryla, W. (2007), "Structural and biomechanical biocompatibility in bone-porous implant fixation region - on the basis of two-phase poroelastic biomechanical model of bone tissue", Engineering of Biomaterials, Vol. 10 Nos 69-72, pp. 93-5.
49. Uklejewski, R., Rogala, P., Winiecki, M., Mielniczuk, J., Auguscinski, A. and Berdychowski, M. (2008b), "Modern trends in bioengineering design of low-invasive joint endoprosthesis", Engineering of Biomaterials, Vol. 11 Nos 77-80, pp. 32-3.
50. Vandenbroucke, B. and Kruth, J.-P. (2007), "Selective laser melting of biocompatible metals for rapid manufacturing of medical parts", Rapid Prototyping Journal, Vol. 13, pp. 196-203.
51. Vilaro, T., Abed, S. and Knapp, W. (2008), "Direct manufacturing of technical parts using selective laser melting: example of automotive application", paper presented at the 12th European Forum on Rapid Prototyping, Es cole Centrale de Paris, March 3-6, 2008, available at: www.afpr.asso.fr/data/info/presentation/080305-s3-3-aepr2008.pdf (accessed June 10, 2009).
52. Winiecki, M. (2006), "The investigation on the microgeometrical constructional properties of porous endoosseous implants and the influence of these properties on the strength of the bone-implant model fixation" (in Polish), PhD thesis, Poznan University of Technology, Poznan.
53. Winiecki, M., Auguscinski, A., Rogala, P., Mielniczuk, J. and Uklejewski, R. (2006), "The poroparameters for evaluation of structural-osteoinductive and mechanical properties of bone-implant porous coating interface. Part 2. Experimental results", Journal of Biomechanics, Vol. 39, Suppl. 2, p. S469.
54. Truscott, M., de Beer, D., Vicatos, G., Hosking, K., Barnard, L., Booysen, G., Campbell, R.I. and Using, R.P. (2007), "to promote collaborative design of customized medical implants", Rapid Prototyping Journal, Vol. 13, pp. 107-14.