Synthesis of sub-10-nm Sn nanoparticles from Sn(II) 2-ethylhexanoate by a modified polyol process and preparation of AgSn film by melting of the Sn nanoparticles

Thin Solid Films

Volumn 562, Issue , 2014, Pages 211-217

  Chee, Sang Soo ^a   Lee, Jong Hyun ^a  

^a Seoul National University of Science and Technology   (South Korea)

Author keywords

Composite ink; Melting point; Modified polyol synthesis; Nanoparticles; Silver; Sn(II) 2 ethylhexanoate; Tin

Indexed keywords

ALCOHOLS; FILM PREPARATION; MELTING POINT; NANOPARTICLES; SILVER; SINTERING; SYNTHESIS (CHEMICAL);

DIETHYLENE GLYCOL; LOW MELTING POINT; MODIFIED POLYOL PROCESS; POLY VINYL PYRROLIDONE; POLYOL SYNTHESIS; PRACTICAL SYSTEMS; ROOM TEMPERATURE; SODIUM BORO HYDRIDES;

TIN;

EID: 84901772623     PISSN: 00406090     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tsf.2014.04.061     Document Type: Article

References (40)

1. M.G. Pecht, and A. Govind In-situ measurements of surface mount IC package deformations during reflow soldering IEEE Trans. Comp., Packag., Manufact. Technol. 20 1997 207
2. T.Y. Tee, and Z. Zhong Integrated vapor pressure, hygroswelling, and thermo-mechanical stress modeling of QFN package during reflow with interfacial facture mechanics analysis Microelectron. Reliab. 44 2004 105
3. S. Zhao, and X. Pang Investigation of delamination control in plastic package Microelectron. Reliab. 49 2009 350
4. S.P. Gurrum, S.K. Suman, Y.K. Joshi, and A.G. Fedorov Thermal issues in next-generation integrated circuits IEEE Trans. Dev. Mater. Reliab. 4 2004 709
5. R. Singh, A. Akbarzadeh, and M. Mochizuki Sintered porous heat sink for cooling of high-powered microprocessors for server applications Int. J. Heat Mass Transfer 52 2009 2289
6. S.K. Kang, and A.K. Sarkhel Lead (Pb)-free solders for electronic packaging J. Electron. Mater. 23 1994 701
7. S. Kikuchi, M. Nishimura, K. Suetsugu, T. Ikari, and K. Matsushige Strength of bonding interface in lead-free Sn alloy solders Mater. Sci. Eng. A 319 2001 475
8. K. Suganuma, T. Sakai, K. Kim, Y. Takagi, J. Sumimoto, and M. Ueshima Thermal and mechanical stability of soldering QFP with Sn-Bi-Ag lead-free alloy IEEE Trans. Electron. Packag. Manuf. 25 2002 257
9. W. Dong, Y. Shi, Z. Xia, Y. Lei, and F. Guo Effects of trace amount of rare earth additions on microstructure and properties of Sn-Bi-based solder alloy J. Electron. Mater. 37 2008 982
10. Y. Shiue, and T. Chuang Effect of La addition on the interfacial intermetallics and bonding strengths of Sn-58Bi solder joints with Au/Ni/Cu pads J. Alloys Compd. 491 2010 610
11. M. Mccormack, H.S. Chen, G.W. Kammlott, and S. Jin Significantly improved mechanical properties of Bi-Sn solder alloys by Ag-doping J. Electron. Mater. 26 1997 954
12. M. Takagi Electron-diffraction study of liquid-solid transition of thin metal films J. Phys. Soc. Jpn. 9 1954 359
13. Y.H. Jo, I. Jung, C.S. Choi, I. Kim, and H.M. Lee Synthesis and characterization of low temperature Sn nanoparticles for the fabrication of highly conductive ink Nanotechnology 22 2011 225701 (8 pp.)
14. P.-C. Huang, and J.-G. Duh Effects of different surfactant additions and treatments on the characteristics of tin nanosolder by chemical reduction method Orlando, U.S.A., May, 2008 58th Electronic Components and Technology Conference (ECTC) Proceedings 2008 431
15. H. Jiang, K. Moon, F. Hua, and C.P. Wong Synthesis and thermal and wetting properties of tin/silver alloy nanoparticles for low melting point lead-free solders Chem. Mater. 19 2007 4482
16. L.-Y. Hsiao, and J.-G. Duh Revealing the nucleation and growth mechanism of a novel solder developed from Sn-3.5Ag-0.5Cu nanoparticles by a chemical reduction method J. Electron. Mater. 35 2006 1755
17. C.Y. Lin, U.S. Mohanty, and J.H. Chou Synthesis and characterization of Sn-3.5Ag-XZn alloy nanoparticles by the chemical reduction method J. Alloys Compd. 472 2009 281
18. Y.H. Jo, J.C. Park, J.U. Bang, H. Song, and H.M. Lee New synthesis approach for low temperature bimetallic nanoparticles: size and composition controlled Sn-Cu nanoparticles J. Nanosci. Nanotechnol. 11 2011 1037
19. S.L. Lai, J.Y. Guo, V. Petrova, G. Ramanath, and L.H. Allen Size-dependent melting properties of small tin particles: nanocalorimetric measurements Phys. Rev. Lett. 77 1996 99
20. H. Jiang, K. Moon, H. Dong, F. Hua, and C.P. Wong Size-dependent melting properties of tin nanoparticles Chem. Phys. Lett. 429 2006 492
21. S.-S. Chee, and J.-H. Lee Effects of reductant amount and capping agent on tin nanoparticles synthesis using a tin(II) 2-ethylhexanoate precursor Adv. Mater. Res. 530 2012 52
22. S.-S. Chee, and J.-H. Lee Effects of process parameters in synthesizing Sn nanoparticles via chemical reduction Electron. Mater. Lett. 8 2012 53
23. F. Fievet, J.P. Lagier, B. Blin, B. Beaudoin, and M. Figlarz Homogeneous and heterogeneous nucleations in the polyol process for the preparation of micron and submicron size metal particles Solid State Ionics 32 33 1989 198
24. S.-S. Chee, and J.-H. Lee Reduction synthesis of tin nanoparticles using various precursors and melting behavior Electron. Mater. Lett. 8 2012 587
25. T. Hinotsu, B. Jeyadevan, C.N. Chinnasamy, K. Shinoda, and K. Tohji Size and structure control of magnetic nanoparticles by using a modified polyol process J. Appl. Phys. 95 2004 7477
26. V.K. La Mer, and R.H. Dinegar Theory, production and mechanism of formation of monodispersed hydrosols J. Am. Chem. Soc. 72 1950 4847
27. V.K. La Mer Nucleation in phase transitions Ind. Eng. Chem. 44 1952 1270
28. B.K. Park, S. Jeong, D. Kim, J. Moon, S. Lim, and J.S. Kim Synthesis and size control of monodisperse copper nanoparticles by polyol method J. Colloid Interface Sci. 311 2007 417
29. J.T.G. Overbeek Monodisperse colloidal systems, fascinating and useful Adv. Colloid Interface Sci. 15 1982 251
30. Y. Wang, J.Y. Lee, and T.C. Deivaraj A microemulsion-based preparation of tin/tin oxide core/shell nanoparticles with particle size control J. Mater. Chem. 14 2004 362
31. P. Bommersbach, M. Chaker, M. Mohamedi, and D. Guay Physico-chemical and electrochemical properties of platinum-tin nanoparticles synthesized by pulsed laser ablation for ethanol oxidation J. Phys. Chem. C 112 2008 14672
32. Md.T. Uddin, Y. Nicolas, C. Olivier, T. Toupance, L. Servant, M.M. Müller, H.-J. Kleebe, J. Ziegler, and W. Jaegermann Inorg. Chem. 51 2012 7764
33. L. Renard, O. Babot, H. Saadaoui, H. Fuess, J. Brötz, A. Gurlo, E. Arveux, A. Klein, and T. Toupance Nanoscale 4 2012 6806
34. K.X. Yao, and H.C. Zeng ZnO/PVP nanocomposite spheres with two hemispheres J. Phys. Chem. C 111 2007 13301
35. F. Bonet, K. Tekaia-Elhsissen, and K.V. Sarathy Study of interaction of ethylene glycol/PVP phase on noble metal powders prepared by polyol process Bull. Mater. Sci. 23 2000 165
36. 4 nanoparticles as a MRI contrast agent J. Mater. Sci. Mater. Med. 21 2010 1205
37. Z. Zhang, B. Zhao, and L. Hu PVP protective mechanism of ultrafine silver powder synthesized by chemical reduction processes J. Solid State Chem. 121 1996 105
38. 2-ZnO hollow nanofibers fabricated from single capillary electrospinning Solid State Commun. 151 2011 895
39. S. Jeong, K. Woo, D. Kim, S. Lim, J.S. Kim, H. Shin, Y.N. Xia, and J. Moon Controlling the thickness of the surface oxide layer on Cu nanoparticles for the fabrication of conductive structures by ink-jet printing Adv. Funct. Mater. 18 2008 679
40. S.-S. Chee, and J.-H. Lee Synthesis of tin nanoparticles through modified polyol process and effects of centrifuging and drying on nanoparticles Trans. Nonferrous Met. Soc. China 22 2012 s707