Some current directions in the theory and application of statistical process monitoring

Journal of Quality Technology

Volumn 46, Issue 1, 2014, Pages 78-94

  Woodall, William H ^a   Montgomery, Douglas C ^b  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b ARIZONA STATE UNIVERSITY   (United States)

Author keywords

Control chart; Healthcare monitoring; Image monitoring; Profile monitoring; Public health surveillance; Risk adjusted monitoring; Spatiotemporal surveillance; SPC; Statistical process control

Indexed keywords

CONTROL CHARTS; HEALTH RISKS; MONITORING; PROCESS CONTROL; PROCESS MONITORING;

HEALTHCARE MONITORING; IMAGE MONITORING; PROFILE MONITORING; PUBLIC HEALTH SURVEILLANCES; RISK-ADJUSTED;

STATISTICAL PROCESS CONTROL;

EID: 84891456456     PISSN: 00224065     EISSN: None     Source Type: Journal    
DOI: 10.1080/00224065.2014.11917955     Document Type: Article

References (173)

1. ALY, A. A.; MAHMOUD, M. A.; and WOODALL, W. H. (2013). "A Comparison of the Performance of Phase II Simple Linear Profile Control Charts when Parameters Are Estimated". Communications in Statistics - Simulation and Computation, to appear.
2. AMIRI, A. and ALLAHYARI, S. (2011). "Change Point Estimation Methods for Control Chart Postsignal Diagnostics: A Literature Review". Quality and Reliability Engineering International 28(7), pp. 673-685.
3. APLEY, D. W. (2012). "Posterior Distribution Charts: A Bayesian Approach for Graphically Exploring a Process Mean". Technometrics 54(3), pp. 279-293.
4. APLEY, D. W. and LEE, H. Y. (2010). "Simultaneous Identification of Premodeled and Unmodeled Variation Patterns". Journal of Quality Technology 42(1), pp. 36-51.
5. APLEY, D. W. and SHI, J. (1999). "The GLRT for Statistical Process Control of Autocorrelated Processes". IIE Transactions 31(12), pp. 1123-1134. (Pubitemid 30504588)
6. ATASHGAR, K. (2013). "Identification of the Change Point: An Overview". International Journal of Advanced Manufacturing Technology 64, pp. 1663-1683.
7. BENJAMINI, Y. and KLING, Y. (1999). "A Look at Statistical Process Control Through the p-Values". Technical Report RP-SOR-99-08. Tel Aviv University, Israel. http://www.math.tau.ac.il/ybenja/KlingW.html (accessed 10/7/2012).
8. BERSIMIS, S.; PSARAKIS, S.; and PANARETOS, J. (2007). "Multivariate Statistical Process Control Charts: An Overview". Quality and Reliability Engineering International 23, pp. 517-543. (Pubitemid 47245685)
9. BISGAARD, S. (2012). "The Future of Quality Technology: From a Manufacturing to a Knowledge Economy & From Defects to Innovations". Quality Engineering 24, pp. 30-36.
10. Box, G.; LUCENO, A.; and PANIAGUA-QUINONES, C. (2009). Statistical Control by Monitoring and Feedback Adjustment, 2nd edition. Hoboken, NJ: John Wiley & Sons, Inc.
11. Box, G. E. P. and NARASIMHAN, S. (2010). "Rethinking Statistics for Quality Control". Quality Engineering 22, pp. 60-72.
12. BUCKERIDGE, D. L.; BURKOM, H.; CAMPBELL, M.; HOGAN, W. R.; and MOORE, A. W. (2005). "Algorithms for Rapid Outbreak Detection: A Research Synthesis". Journal of Biomedical Informatics 38, pp. 99-113. (Pubitemid 40431925)
13. BURKOM, H. S.; ELBERT, Y.; FELDMAN, A.; and LIN, J. (2004). "Role of Data Aggregation in Biosurveillance Detection Strategies with Applications from ESSENCE". Morbidity and Mortality Weekly Report 53 (Suppl), pp. 67-73.
14. CAPIZZI, G. (2001). "Design of Change Detection Algorithms Based on the Generalized Likelihood Ratio Test". Environmetrics 12, pp. 749-756. (Pubitemid 34034343)
15. CAPIZZI, G. and MASAROTTO, G. (2010). "Self-Starting CUS-CORE Control Charts for Individual Multivariate Observations". Journal of Quality Technology 42, pp. 136-151.
16. CAPIZZI, G. and MASAROTTO, G. (2012). "Adaptive Generalized Likelihood Ratio Control Charts for Detecting Unknown Patterned Mean Shifts". Journal of Quality Technology 44(4), pp. 281-303.
17. CAPIZZI, G. and MASAROTTO, G. (2013a). "Comparison of Phase II Control Charts Based on Variable Selection Methods". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
18. CAPIZZI, G. and MASAROTTO, G. (2013b). "Efficient Control Chart Calibration by Simulated Stochastic Approximation". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
19. CASEY, B. M.; MCINTIRE, D. D.; and LEVENO, K. J. (2001). "The Continuing Value of the Apgar Score for the Assessment of Newborn Infants". New England Journal of Medicine 344, pp. 467-471. (Pubitemid 32164897)
20. CHAKRABORTI, S. (2011). "Nonparametric (Distribution-Free) Quality Control Charts". Encyclopedia of Statistical Sciences, pp. 1-27.
21. CHAKRABORTI, S.; HUMAN, S. W.; and GRAHAM, M. A. (2009). "Phase I Statistical Process Control Charts: An Overview and Some Results". Quality Engineering 21, pp. 52-62.
22. CHAKRABORTI, S.; HUMAN, S. W.; and GRAHAM, M. A. (2011). "Nonparametric (Distribution-Free) Quality Control Charts". In Handbook of Methods and Applications of Statistics: Engineering, Quality Control, and Physical Sciences, Balakrishnan, N., ed., pp. 298-329. New York, NY: John Wiley & Sons.
23. CHAKRABORTI, S.; VAN DER LAAN, P.; and BAKIR, S. T. (2001). "Nonparametric Control Charts: An Overview and Some Results". Journal of Quality Technology 33, pp. 304-315.
24. CHENG, S. W. and THAGA, K. (2006). "Single Variables Control Charts: An Overview". Quality and Reliability Engineering International 22(7), pp. 811-820. (Pubitemid 44703443)
25. CHENG, T.-C; HSIEH, P.-H.; and YANG, S.-F. (2013). "Process Control for the Vector Autoregressive Model". Quality and Reliability Engineering International, to appear.
26. CHIPMAN, H. A.; MACKAY, R. J.; and STEINER, S. H. (2010). "Comment on 'Nonparametric Profile Monitoring by Mixed Effects Modeling' by P. Qiu, C. Zou, and Z. Wang". Technometrics 52(3), pp. 280-283.
27. DEL CASTILLO, E. (2002). Statistical Process Adjustment for Quality Control. Hoboken, NJ: John Wiley & Sons, Inc.
28. DEL CASTILLO, E. (2006). "Statistical Process Adjustment: A Brief Retrospective, Current Status, and Some Opportunities for Further Work". Statistica Neerlandica 60, pp. 309-326. (Pubitemid 44117942)
29. DENBY, L.; LANDWEHR, J. M.; MALLOWS, C. L.; MELOCHE, J.; TUCK, J.; XI, B.; MICHAILIDIS, G.; and NAIR, V. N. (2007). "Statistical Aspects of the Analysis of Data Networks". Technometrics 49, pp. 318-334. (Pubitemid 47292489)
30. DENG, H.; RUNGER, G; and Tuv, E. (2012). "System Monitoring with Real-Time Contrasts." Journal of Quality Technology 44(1), pp. 9-27.
31. DING, Y.; ZENG, L.; and ZHOU, S. (2006). "Phase I Analysis for Monitoring Nonlinear Profiles in Manufacturing". Journal of Quality Technology 38(3), pp. 199-216. (Pubitemid 44086018)
32. DE OCA, V. M.; JESKE, D. R.; ZHANG, Q.; RENDON, C; and MARVASTI, M. (2010). "A CUSUM Change-Point Detection Algorithm for Non-Stationary Sequences with Application to Data Network Surveillance". The Journal of Systems and Software 83, pp. 1288-1297.
33. DUBRAWSKI, A. (2011). "The Role of Data Aggregation in Public Health and Food Safety Surveillance". In Bio surveillance - Methods and Case Studies, Kass-Hout, T. and Zhang, X., eds., chapter 9. Boca Raton, FL: CRC/Taylor & Francis Group.
34. EPPRECHT, E. K.; COSTA, A. F. B.; and MENDES, F. C. T. (2003). "Adaptive Control Charts for Attributes". IIE Transactions 35(6), pp. 567-582.
35. EPPRECHT, E. K. and SIMÖES, B. F. T. (2013). "Statistical Control of Multiple-Steam Processes - A Literature Review". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
36. FALTIN, F. W.; KENETT, R.S.; and RUGGERI, F., eds. (2012). Statistical Methods in Healthcare. West Sussex, UK: John Wiley & Sons, Ltd.
37. FERRER, A. (2014). "Latent Structures Based Multivariate Statistical Process Control: A Paradigm Shift". Quality Engineering, to appear.
38. FRAKER, S. E.; WOODALL, W. H.; and MOUSAVI, S. (2008). "Performance Metrics for Surveillance Schemes". Quality Engineering 20, pp. 451-464.
39. FRICKER, R. D., JR. (2011). "Some Methodological Issues in Biosurveillance (with Discussion)". Statistics in Medicine 30, pp. 403-441.
40. FRICKER, R. D., JR. (2013). Introduction to Statistical Methods for Biosurveillance with an Emphasis on Syndromic Surveillance. Cambridge, UK: Cambridge University Press.
41. FRICKER, R. D., JR. and ROLKA, H. R. (2006). "Protecting Against Biological Terrorism: Statistical Issues in Electronic Biosurveillance". Chance 19, pp. 4-13.
42. FRISÉN, M. (2006). "Evaluations of Methods for Statistical Surveillance". Statistics in Medicine 11(11), pp. 1489-1502.
43. FRISÉN, M. (2007). "Statistical Surveillance, Optimality and Methods". International Statistical Review 71(2), pp. 403-434.
44. FRISÉN, M., ed. (2008). Financial Surveillance. Hoboken, NJ: John Wiley & Sons, Inc.
45. FRISÉN, M. (2009). "Optimal Sequential Surveillance for Finance, Public Health, and Other Areas (with Discussion)". Sequential Analysis 28, pp. 310-337.
46. GANDY, A.; KVALOY, J. T.; BOTTLE, A.; and ZHOU, F. (2010). "Risk-Adjusted Monitoring of Time to Event". Biometrika 97(2), pp. 375-388.
47. GOMBAY, E.; HUSSEIN, A. A.; and STEINER, S. H. (2011). "Monitoring Binary Outcomes Using Risk-Adjusted Charts: A Comparative Study". Statistics in Medicine 30(23), pp. 2815-2826.
48. GRIGG, O. and FAREWELL, V. (2004). "An Overview of Risk-Adjusted Charts". Journal of Royal Statistical Society, Series A 167, pp. 523-539. (Pubitemid 38888580)
49. GRIGG, O. and SPIEGELHALTER, D. (2008). "An Empirical Approximation to the Null Unbounded Steady-State Distribution of the Cumulative Sum Statistic". Technometrics 50, pp. 501-511.
50. IMTIAZ, S. and SHAH, S. (2008). "Treatment of Missing Values in Process Data Analysis". The Canadian Journal of Chemical Engineering 86(5), pp. 838-858.
51. JAHROMI, S. M. Z.; SAGHAEI, A.; and ARIFFIN, M. K. A. M. (2012). "A Review on Fuzzy Control Charts for Monitoring Attribute Data". Applied Mechanics and Materials 159, pp. 23-28.
52. JENSEN, W. A.; JONES-FARMER, L. A.; CHAMP, C. W.; and WOODALL, W. H. (2006). "Effects of Parameter Estimation on Control Chart Properties: A Literature Review". Journal of Quality Technology 38, pp. 349-364. (Pubitemid 44598821)
53. JESKE, D. R.; DE OCA, V. M.; BISCHOFF, W.; and MARVASTI, M. (2009). "CUSUM Techniques for Timeslot Sequences with Applications to Network Surveillance". Computational Statistics and Data Analysis 53, pp. 4332-4344.
54. JIANG, W.; HAN, S. W.; TSUI, K-L.; and WOODALL, W. H. (2011). "Spatiotemporal Surveillance in the Presence of Spatial Correlation". Statistics in Medicine 30(5), pp. 569-583.
55. JONES, M. A. and STEINER, S. H. (2012). "Assessing the Effect of Estimation Error on Risk-Adjusted CUSUM Chart Performance". International Journal for Quality in Health Care 24(2), pp. 176-181.
56. JONES-FARMER, A.; WOODALL, W. H.; STEINER, S. H.; and CHAMP, C. W. (2013). "An Overview of Phase I Analysis for Process Improvement and Monitoring". Submitted for publication.
57. KENETT, R. S. and POLLAK, M. (2012). "On Assessing the Performance of Sequential Procedures for Detecting a Change". Quality and Reliability Engineering International 28(5), pp. 500-507.
58. KENETT, R. and ZACKS, S. (1998). Modern Industrial Statistics: Design and Control of Quality and Reliability. Pacific Grove, CA: Brooks/Cole Publishing Company.
59. KMAN, N. E. and BACHMANN, D. J. (2012). "Biosurveillance: A Review and Update". Advances in Preventive Medicine, 9 pages, open access.
60. KNOTH, S. (2012). "SPC: Statistical Process Control-Collection of Some Useful Functions". R package version 0.4.2.
61. KNOTH, S. and SCHMID, W. (2004). "Control Charts for Time Series: A Review". In Frontiers in Statistical Quality Control, Lenz, H.-J. and Wilrich, P.-Th., eds., vol. 7, pp. 210-236. Heidelberg, Germany: Physica-Verlag.
62. LAMBERT, D. and LIU, C. (2006). "Adaptive Thresholds: Monitoring Streams of Network Counts". Journal of the American Statistical Association 101(473), pp. 78-88. (Pubitemid 43500027)
63. LAUNGRUNGRONG, B.; BORROR, C. M.; and MONTGOMERY, D. C. (2011). "EWMA Control Charts for Multivariate Poisson-Distributed Data". International Journal of Quality Engineering and Technology 2(3), pp. 185-211.
64. LAWLESS, J. F.; CROWDER, M. J.; and LEE, K.-A. (2012). "Monitoring Warranty Claims with CUSUMs". Technometrics 54(3), pp. 269-278.
65. LAWSON, A. B. and KLEINMAN, K., eds. (2005) Spatial & Syndromic Surveillance for Public Health. Hoboken, NJ: John Wiley & Sons, Inc.
66. LEDOLTER, J. and BISGAARD, S. (2007). "Challenges in Constructing Time Series Models from Process Data". Quality and Reliability Engineering International 27(2), pp. 165-178.
67. LI, J.; TSUNG, F.; and Zou, C. (2012). "Directional Control Schemes for Multivariate Categorical Processes". Journal of Quality Technology 44(2), pp. 136-154.
68. LI, Y. and TSUNG, F. (2009). "False Discovery Rate-Adjusted Charting Schemes for Multistage Process Fault Diagnosis and Isolation". Technometrics 51, pp. 186-205.
69. LI, Z.; Qiu, P.; CHATTERJEE, S.; and WANG, Z. (2013). "Using p-Values to Design Statistical Process Control Charts". Statistical Papers 54, pp. 523-539.
70. LI, Z.; ZOU, C; GONG, Z.; and WANG, Z. (2013). "The Computation of Average Run Length and Average Time to Signal: An Overview". Journal of Statistical Computation and Simulation, to appear
71. LIU, J. (2010). "Variation Reduction for Multistage Manufacturing Processes: A Comparison Survey of Statistical Process Control vs. Stream of Variation Methodologies". Quality and Reliability Engineering International 26, pp. 645-661.
72. LOMBARDO, J.; BURKOM, H.; ELBERT, E.; MAGRUDER, S.; LEWIS, S. H.; LOSCHEN, W.; SARI, J.; SNIEGOSKI, C; WOJCIK, R.; and PAVLIN, J. (2003). "A Systems Overview of the Electronic Surveillance System for the Early Notification of Community-Based Epidemics (ESSENCE II)". Journal of Urban Health: Bulletin of the New York Academy of Medicine 80(Supplement 1), pp. i32-i42. (Pubitemid 37490069)
73. MAHMOUD, M. A. (2012). "The Performance of Phase II Simple Linear Profile Approaches when Parameters Are Estimated". Communications in Statistics - Simulation and Computation Al, pp. 1816-1833.
74. MAHMOUD, M. A.; PARKER, P. A.; WOODALL, W. H.; and HAWKINS, D. M. (2007). "A Change Point Method for Linear Profile Data". Quality & Reliability Engineering International 23(2), pp. 247-268. (Pubitemid 46397290)
75. MAHMOUD, M. A.; WOODALL, W. H.; and DAVIS, R. E. (2008). "Performance Comparison of Some Likelihood Ratio-Based Statistical Surveillance Schemes". Journal of Applied Statistics 35(7), pp. 783-798.
76. MARVASTI, M. (2012). "Network Monitoring". Presentation at the Quality and Productivity Research Conference, Long Beach, CA.
77. MCCRACKEN, A. K. and CHAKRABORTI, S. (2013). "Control Charts for Joint Monitoring of Mean and Variance: An Overview". Quality Technology and Quantitative Management 10(1), pp. 17-36.
78. McCULLOH, I. A. and CARLEY, K. M. (2008). "Social Network Change Detection". Technical Report CMU-ISR-08-116, Institute for Software Research, Carnegie Mellon University.
79. MCCULLOH, I. A.; JOHNSON, A. N.; and CARLEY, K. M. (2012). "Spectral Analysis of Social Networks to Identify Periodicity". Journal of Mathematical Sociology 36(2), pp. 80-96.
80. MEGAHED, F. M. and JONES-FARMER, L. A. (2013). "A Statistical Process Monitoring Perspective on 'Big Data'". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
81. MEGAHED, F. M.; WELLS, L. J.; CAMELIO, J. A.; and WOODALL, W. H. (2012). "A Spatiotemporal Method for the Monitoring of Image Data". Quality and Reliability Engineering International 28, 967-980
82. MEGAHED, F. M.; WOODALL, W. H.; and CAMELIO, J. A. (2011). "A Review and Perspective on Control Charting with Image Data". Journal of Quality Technology 43(2), pp. 83-98.
83. MEI, Y. (2006). "Suboptimal Properties of Page's CUSUM and Shiryayev-Roberts Procedures in Change-Point Problems with Dependent Observations". Statistica Sinica 16(3), pp. 883-897. (Pubitemid 44744355)
84. MEI, Y. (2008). "Is Average Run Length to False Alarm Always an Informative Criterion? (with Discussion)". Sequential Analysis 27(4), pp. 354-419.
85. MEI, Y. (2010). "Efficient Scalable Schemes for Monitoring a Large Number of Data Streams". Biometrika 97(2), pp. 419-433.
86. MEI, Y.; HAN, S. W.; and TSUI, K.-L. (2011). "Early Detection of a Change in Poisson Rate After Accounting for Population Size Effects". Statistica Sinica 21, pp. 597-624.
87. MONTGOMERY, D. C. (2013). Introduction to Statistical Quality Control, 7th edition. Hoboken, NJ: John Wiley & Sons, Inc.
88. MONTGOMERY, D. C, and WOODALL, W. H. (2008). "An Overview of Six Sigma". International Statistical Review 76(3), pp. 329-346.
89. MOUSAVI, S. and REYNOLDS, M. R., JR. (2009). "A CUSUM Chart for Monitoring a Proportion with Autocorrelated Binary Observations". Journal of Quality Technology 41(4), pp. 401-414.
90. NAIR, V.; HANSEN, M.; and SHI, J. (2000). "Statistics in Advanced Manufacturing". Journal of the American Statistical Association 95, pp. 1002-1005.
91. NELSON, L. S. (1994). "A Control Chart for Parts-Per-Million Nonconforming Items". Journal of Quality Technology 26, pp. 239-240.
92. NOOROSSANA, R.; SAGHAEI, A.; and AMIRI, A., (eds.) (2011). Statistical Analysis of Profile Monitoring. Hoboken, NJ: John Wiley & Sons, Inc.
93. OLTEANU, D. (2010). "Cumulative Sum Control Charts for Censored Reliability Data". Ph.D. dissertation, Department of Statistics, Virginia Tech.
94. PAN, R. and RIGDON, S. E. (2012). "A Bayesian Approach to Change Point Estimation in Multivariate SPC". Journal of Quality Technology 44(3), pp. 231-248.
95. PASCUAL, F and LI, S. (2012). "Monitoring the Weibull Shape Parameter by Control Charts for the Sample Range of Type II Censored Data". Quality and Reliability Engineering International 28(2), pp. 233-246.
96. PAYNABAR, K.; JIN, J.; and PACELLA, M., (2013). "Monitoring and Diagnosis of Multichannel Nonlinear Profile Variations Using Uncorrelated Multilinear Principal Component Analysis". IIE Transactions 45(11), pp. 1235-1247.
97. PAYNABAR, K.; JIN, J.; and YEH, A. B. (2012). "Phase I Risk-Adjusted Control Charts for Monitoring Surgical Performance by Considering Categorical Covariates". Journal of Quality Technology 44(1), pp. 39-53.
98. PIGNATIELLO, J. J., JR. and SAMUEL, T. R. (2001). "Estimation of the Change Point of a Normal Process Mean in SPC Applications". Journal of Quality Technology 33(1), pp. 82-95. (Pubitemid 33722667)
99. POLUNCHENKO, A. S. and TARTAKOVSKY, A. G. (2010). "On Optimality of the Shiryaev-Roberts Procedure for Detecting a Change in Distribution". Annals of Statistics 38(6), pp. 3445-3457.
100. PRAJAPATI, D. R. and SINGH, S. (2012). "Control Charts for Monitoring the Autocorrelated Process Parameters: A Literature Review". International Journal of Productivity and Quality Management 10, pp. 207-249.
101. PSARAKIS, S. (2011). "The Use of Neural Networks in Statistical Process Control Charts". Quality and Reliability Engineering International 27(5), pp. 641-650.
102. PSARAKIS, S. and PAPALEONIDA, G. E. A. (2007). "SPC Procedures for Monitoring Autocorrelated Processes". Quality Technology and Quantitative Management A, pp. 501-540.
103. PSARAKIS, S.; VYNIOU, A. K.; and CASTAGLIOLA, P. (2013). "Some Recent Developments on the Effects of Parameter Estimation on Control Charts". Quality and Reliability Engineering International, to appear.
104. QIN, S. J. (2003). "Statistical Process Monitoring: Basics and Beyond". Journal of Chemometrics 17, pp. 480-502.
105. QIU, P. H. and LI, Z. (2011). "On Nonparametric Statistical Process Control of Univariate Processes". Technometrics 53(4), pp. 390-405.
106. QIU, P.; Zou, C; and WANG, Z. (2010). "Nonparametric Profile Monitoring by Mixed Effects Modeling (with Discussion)". Technometrics 52 (3), pp. 265-277.
107. REYNOLDS, M. R., JR. and Lu, J. (2010). "An Evaluation of a GLR Control Chart for Monitoring the Process Mean". Journal of Quality Technology 42, pp. 287-310.
108. REYNOLDS, M. R., JR. and STOUMBOS, Z. G. (2000). "A General Approach to Modeling CUSUM Charts for a Proportion". IIE Transactions 32, pp. 515-535. (Pubitemid 30576057)
109. REYNOLDS, M. R., JR. and STOUMBOS, Z. G. (2004). "Should Observations Be Grouped for Effective Process Monitoring?" Journal of Quality Technology 36(4), pp. 343-366.
110. ROBERTS, S. W. (1966). "A Comparison of Some Control Chart Procedures". Technometrics 8, pp. 411-430.
111. ROBERTSON, C; NELSON, T. A.; MACNAB, Y. C; and LAWSON, A. B. (2010). "Review of Methods for Space-Time Disease Surveillance". Spatial and Spatiotemporal Epidemiology 1, pp. 105-116.
112. ROGERSON, P. and YAMADA, I. (2009). Statistical Detection and Surveillance of Geographic Clusters. Boca Raton, FL: CRC Press.
113. ROLKA, H.; BURKOM, H.; COOPER, G. F.; KULLDORFF, M.; MADIGAN, D.; and WONG, W.-W. (2007). "Issues in Applied Statistics for Public Health Bioterrorism Surveillance Using Multiple Data Streams". Statistics in Medicine 26, pp. 1834-1856. (Pubitemid 46455640)
114. Ross, G. J.; TASOULIS, D. K.; and ADAMS, N. M. (2011). "Nonparametric Monitoring of Data Streams for Changes in Location and Scale". Technometrics 53(4), pp. 379-389.
115. RYAN, A. G. and WOODALL, W. H. (2010). "Control Charts for Poisson Count Data with Varying Sample Sizes". Journal of Quality Technology 42(3), pp. 260-275.
116. RYAN, T. P. (2011). Statistical Methods for Quality Improvement, 3rd Edition. Hoboken, NJ: John Wiley & Sons, Inc.
117. SANTIAGO, E. and SMITH, J. (2013). "Control Charts Based on the Exponential Distribution: Adapting Runs Rules for the t Chart". Quality Engineering 25(2), pp. 85-96.
118. SCHUH, A.; WOODALL, W. H.; and CAMELIO, J. A. (2013). "The Effect of Aggregating Data When Monitoring a Poisson Process". Journal of Quality Technology 45(3), pp. 260-271.
119. SHI, J. (2006). Stream of Variation Modeling and Analysis for Multistage Manufacturing Processes. Boca Raton, FL: CRC Press, Taylor & Francis Group.
120. SHI, J. and ZHOU, S. (2009). "Quality Control and Improvement for Multistage Systems: A Survey". IIE Transactions 41(9), pp. 744-753.
121. SHIRYAYEV, A. N. (1963). "On Optimum Methods in Quickest Detection Problems". Theory of Probability and Its Applications 8, pp. 22-46.
122. SHIRYAYEV, A. N. (2010). "Quickest Detection Problems: Fifty Years Later". Sequential Analysis 29(4), pp. 345-385.
123. SHMUELI, G. and BURKOM, H. (2010). "Statistical Challenges Facing Early Outbreak Detection in Biosurveillance". Technometrics 52(1), pp. 39-51.
124. SIEGMUND, D. O. and YAKIR, B. (2008). "Minimax Optimality of the Shiryayev-Roberts Change-Point Detection Rule". Journal of Statistical Planning and Inference 138(9), pp. 2815-2825.
125. SONESSON, C. (2007). "A CUSUM Framework for Detection of Space-Time Disease Clusters Using Scan Statistics". Statistics in Medicine 26, pp. 4770-4789. (Pubitemid 350020387)
126. SONESSON, C. and BOCK, D. (2003). "A Review and Discussion of Prospective Statistical Surveillance in Public Health". Journal of the Royal Statistical Society, Series A 166, pp. 5-21. (Pubitemid 41685369)
127. SPARKS, R. (2013a). "Challenges in Designing a Disease Surveillance Plan: What We Have and What We Need". IIE Transactions on Healthcare Engineering, to appear.
128. SPARKS, R. (2013b). "Monitoring Social Networks by Exploring Multiple Communication Channels". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
129. SPIEGELHALTER, D.; SHERLAW-JOHNSON, C.; BARDSLEY, M.; BLUNT, I.; WOOD, C.; and GRIGG, O. (2012). "Statistical Methods for Healthcare Regulation: Rating, Screening, and Surveillance (with Discussion)". Journal of the Royal Statistical Society, Series A 175(1), pp. 1-47.
130. STEINER, S. H.; COOK, R. J.; FAREWELL, V. T.; and TREASURE, T. (2000). "Monitoring Surgical Performance Using Risk-Adjusted Cumulative Sum Charts". Biostatistics 1, pp. 441-452. (Pubitemid 33213547)
131. STEINER, S. H. and MACKAY, R. J. (2004). "Effective Monitoring of Processes with Parts Per Million Defective - A Hard Problem". In Frontiers in Statistical Quality Control, Lenz, H. J. and Wilrich, P. T. (eds), vol. 7, pp. 140-149. Heidelberg, Germany: Springer-Verlag.
132. STEINER, S. H. and MACKAY, R. J. (2005). Statistical Engineering: An Algorithm for Reducing Variation in Manufacturing Processes. Milwaukee, WI: ASQ Quality Press.
133. STOUMBOS, Z. G.; REYNOLDS, M. R., JR.; RYAN, T. P.; and WOODALL, W. H. (2000). "The State of Statistical Process Control as We Proceed into the 21st Century". Journal of the American Statistical Association 95, pp. 992-998.
134. STOUMBOS, Z. G. and SULLIVAN, J. H. (2002). "Robustness to Non-Normality of the Multivariate EWMA Control Chart". Journal of Quality Technology 34(3), pp. 260-276.
135. SZARKA, J. L., III, and WOODALL, W. H. (2011). "A Review and Perspective on Surveillance of Bernoulli Processes". Quality and Reliability Engineering International 27, pp. 735-752.
136. TAN, M. H. Y. and SHI, J. (2012). "A Bayesian Approach for Interpreting Mean Shifts in Multivariate Quality Control". Technometrics 54(3), pp. 294-307.
137. TARTAKOVSKY, A. G. and VEERAVALLI, V. V. (2004). "General Asymptotic Bayesian Theory of Quickest Change Detection". Theory of Probability and Its Applications 49(3), pp. 458-497. (Pubitemid 41498128)
138. TENNANT, R.; MOHAMMED, M. A.; COLEMAN, J. J.; and MARTIN, U. (2007). "Monitoring Patients Using Control Charts: A Systematic Review". International Journal for Quality in Health Care 19, pp. 187-194. (Pubitemid 47248941)
139. THOR, J.; LUNDBERG, J.; ASK, J.; OLSSON, J.; CARLI, C; HÄRENSTAM, K. P.; and BROMMELS, M. (2007). "Application of Statistical Process Control in Healthcare Improvement: Systematic Review". Quality and Safety in Health Care 16, pp. 387-399. (Pubitemid 47612679)
140. TOKARS, J. I.; BURKOM, H.; XING, J.; ENGLISH, R.; BLOOM, S.; Cox, K.; and PAVLIN, J. A. (2009). "Enhancing Time-Series Detection Algorithms for Automated Biosurveillance". Emerging Infectious Diseases 15(4), pp. 533-539.
141. TOPALIDOU, E. and PSARAKIS, S. (2009). "Review of Multinomial and Multiattribute Quality Control Charts". Quality and Reliability Engineering International 25(7), pp. 773-804.
142. TSUI, K.-L.; CHEN, N.; HAI, Y.; and ZHOU, Q. (2013). "Statistics Research in Prognostics and Systems Health Management". Submitted for publication.
143. TSUI, K.-L.; CHIU, W.; GIERLICH, P.; GOLDSMAN, D.; LIU, X.; and MASCHEK, T. (2008). "A Review of Healthcare, Public Health, and Syndromic Surveillance". Quality Engineering 20, pp. 435-450.
144. TSUI, K.-L.; HAN, S. W.; JIANG, W.; and Woodall, W. H. (2012). "A Review and Comparison of Likelihood-Based Charting Methods". IIE Transactions 44, pp. 724-743.
145. TSUI, K.-L.; WONG, S. Y.; JIANG, W.; and LIN, C.-J. (2011). "Recent Research and Developments in Temporal and Spatiotemporal Surveillance for Public Health". IEEE Transactions on Reliability 60(1), pp. 49-58.
146. TSUNG, F.; LI, Y.; and JIN, M. (2008). "Statistical Process Control for Multistage Manufacturing and Service Operations: A Review and Some Extensions". International Journal of Operations and Informatics 3, pp. 191-204.
147. TSUNG, F. and WANG, K. (2010). "Adaptive Charting Techniques: Literature Review and Extensions". In Frontiers in Statistical Quality Control, Lenz, H.-J.; Wilrich, P.-Th.; and Schmid, W. (eds.), vol. 9, pp. 19-35. Heidelberg, Germany: Physica-Verlag.
148. UNKEL, S.; FARRINGTON, C. P.; GARTHWAITE, P. H.; ROBERTSON, C.; and ANDREWS, N. (2011). "Statistical Methods for the Prospective Detection of Infectious Disease Outbreaks: A Review". Journal of the Royal Statistical Society, Series A 175(1), pp. 49-82.
149. WANG, K. and JIANG, W. (2009). "High-Dimensional Process Monitoring and Fault Isolation via Variable Selection". Journal of Quality Technology 41(3), pp. 247-258.
150. WEISS, C. H. and TESTIK, M. C. (2009). "CUSUM Monitoring of First-Order Integer-Valued Autoregressive Processes of Poisson Counts". Journal of Quality Technology 41(4), pp. 389-400.
151. WELLS, L. J.; MEGAHED, F. M.; CAMELIO, J. A.; and WOODALL, W. H. (2012). "A Framework for Variation Visualization and Understanding in Complex Manufacturing Systems". Journal of Intelligent Manufacturing 23, pp. 2025-2036.
152. WELLS, L. J.; MEGAHED, F. M.; NIZIOLEK, C.; CAMELIO, J. A.; and WOODALL, W. H. (2013). "Statistical Process Monitoring Approach for High Density Point Clouds". Journal of Intelligent Manufacturing, to appear.
153. WINKEL, P. and ZHANG, N. F. (2007). Statistical Development of Quality in Medicine. Hoboken, NJ: John Wiley & Sons.
154. WOODALL, W. H. (2006). "Use of Control Charts in Health-Care and Public-Health Surveillance (with Discussion)". Journal of Quality Technology 38(2), pp. 89-104.
155. WOODALL, W. H. (2007). "Current Research in Profile Monitoring". Producão 17, pp. 420-425.
156. WOODALL, W. H.; GRIGG, O. A.; and BURKOM, H. S. (2010). "Research Issues and Ideas on Health-Related Monitoring". In Frontiers in Statistical Quality Control, Lenz, H.-J.; Wilrich, P.-Th.; and Schmid, W. (eds.), vol. 9, pp. 145-155. Heidelberg, Germany: Physica-Verlag.
157. WOODALL, W. H.; MARSHALL, J. B.; JONER, M. D., JR.; FRAKER, S. E.; and ABDEL-SALAM, A. G. (2008). "On the Use and Evaluation of Prospective Scan Methods in Health-Related Surveillance". Journal of the Royal Statistical Society, Series A 171(1), pp. 223-237.
158. WOODALL, W. H. and MONTGOMERY, D. C. (1999). "Research Issues and Ideas in Statistical Process Control". Journal of Quality Technology 31(4), pp. 376-386. (Pubitemid 129585019)
159. WOODALL, W. H. and RYAN, A. G. (2013). "Some Recent Results on Monitoring the Rate of a Rare Event". Paper presented at the 11th International Workshop on Intelligent Statistical Quality Control, Sydney, Australia.
160. WOODALL, W. H.; SPITZNER, D. J.; MONTGOMERY, D. C; and GUPTA, S. (2004). "Using Control Charts to Monitor Process and Product Quality Profiles". Journal of Quality Technology 36, pp. 309-320. (Pubitemid 40072175)
161. YASHCHIN, E. (2010). "Computational and Monte Carlo Aspects of Systems for Monitoring Reliability Data". In Proceedings of COMSTAT 2010, Lechevallier, Y. and Saporta, G. (eds.), pp. 253-262. Heidelberg, Germany: Physica-Verlag.
162. YASHCHIN, E. (2012). "On Detection of Changes in Categorical Data". Quality Technology and Quantitative Management 9 (1), pp. 79-96.
163. YEH, A. B.; LIN, D. K. J.; and MCGRATH, R. N. (2006). "Multivariate Control Charts for Monitoring Covariance Matrix: A Review". Quality Technology and Quantitative Management 3, pp. 415-436.
164. ZENG, L. and ZHOU, S. (2011). "A Bayesian Approach to Risk-Adjusted Outcome Monitoring in Healthcare". Statistics in Medicine 30(29), pp. 3431-3446.
165. ZHANG, M.; MEGAHED, F. M.; and WOODALL, W. H. (2013). "Exponential CUSUM Charts with Estimated Control Limits." Quality and Reliability Engineering International, to appear.
166. ZHOU, Q.; ZOU, C; WANG, Z.; and JIANG, W. (2012). "Likelihood-Based EWMA Charts for Monitoring Poisson Count Data with Time-Varying Sample Sizes". Journal of the American Statistical Association 107(499), pp. 1049-1062.
167. ZORRIASSATINE, F. and TANNOCK, J. D. T. (1998). "A Review of Neural Networks for Statistical Process Control". Journal of Intelligent Manufacturing 9, pp. 209-224.
168. Zou, C. L.; JIANG, W.; and TSUNG, F. (2011). "A LASSO-Based Diagnostic Framework for Multivariate Statistical Process Control". Technometrics 53(3), pp. 297-309.
169. Zou, C; JIANG, W.; and WANG, Z. (2012). "On-Line Monitoring High-Dimensional Data Streams", unpublished manuscript.
170. Zou, C. and QIU, P. (2009). "Multivariate Statistical Process Control Using LASSO". Journal of the American Statistical Association 101, pp. 1586-1596.
171. ZOU, C. and TSUNG, F. (2011). "A Multivariate Sign EWMA Control Chart". Technometrics 53(1), pp. 84-97.
172. ZOU, C; TSUNG, F.; and WANG, Z. (2008). "Monitoring Processes Based on Nonparametric Regression Models". Technometrics 50(4), pp. 512-526.
173. ZOU, C; ZHANG, Y.; and WANG, Z. (2006). "A Control Chart Based on a Change-Point Model for Monitoring Profiles". IIE Transactions 38, pp. 1093-1103. (Pubitemid 44594173)