Using control charts to monitor process and product quality profiles

Journal of Quality Technology

Volumn 36, Issue 3, 2004, Pages 309-320

  Woodall, William H ^a,c   Spitzner, Dan J ^a,c   Montgomery, Douglas C ^b,c   Gupta, Shilpa ^b,c  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b ARIZONA STATE UNIVERSITY   (United States)

^c Department of Statistics ^*  (United States)

Author keywords

Calibration; Linear Regression; Multivariate Quality Control; Nonlinear Regression; Splines; Statistical Process Control; Wavelets

Indexed keywords

CALIBRATION; FUNCTIONS; MATHEMATICAL MODELS; QUALITY CONTROL; REGRESSION ANALYSIS; SPLINES; TORQUE MEASUREMENT; WAVELET TRANSFORMS;

CONTROL CHARTS; LINEAR REGRESSION; MULTIVARIATE QUALITY CONTROL; NONLINEAR REGRESSION;

STATISTICAL PROCESS CONTROL;

EID: 8344246718     PISSN: 00224065     EISSN: None     Source Type: Journal    
DOI: 10.1080/00224065.2004.11980276     Document Type: Article

References (62)

1. AJMANI, V. B. (2003). "Using EWMA Control Charts to Monitor Linear Relationships in Semiconductor Manufacturing". Paper presented at the Joint Statistical Meetings, San Francisco, CA, and at the 47th Annual Fall Technical Conference of ASA and ASQ, El Paso, Texas.
2. ANDREWS, D. W. K.; LEE, I.; and PLOBERGER, W. (1996). "Optimal Changepoint Tests for Normal Linear Regression". Journal of Econometrics 70, pp. 9-38.
3. ANSI/ASQC. (1996). B1-1996 Guide for Quality Control Charts, B2-1996 Control Chart Method of Analyzing Data, B3-1996 Control Chart Method of Controlling Quality During Production. American Society for Quality, Milwaukee, WI.
4. BARTON, R. R. and GONZALEZ-BARRETO, D. R. (1996-97). "Process- Oriented Basis Representations for Multivariate Process Diagnostics". Quality Engineering 9, pp. 107-118.
5. BHARATI, M. H. and MACGREGOR, J. F. (1998). "Multivariate Image Analysis for Real-Time Process Monitoring and Control". Industrial & Engineering Chemical Research 37, pp. 4715-4724.
6. BOEING COMMERCIAL AIRPLANE GROUP, MATERIEL DIVISION, PROCUREMENT QUALITY ASSURANCE DEPARTMENT. (1998). Advanced, Quality System Tools, AQS D1-9000-1. The Boeing Company, Seattle, WA.
7. Box, G. E. P. and DRAPER, N. R. (1969). Evolutionary Operation: A Statistical Method for Process Improvement. John Wiley & Sons, Inc., New York, NY.
8. BR'LL, R. V. (2001). "A Case Study for Control Charting a Product Quality Measure That Is a Continuous Function Over Time". Presentation at the 45th Annual Fall Technical Conference, Toronto, Ontario.
9. BROWN, R. L.; DURBIN, J.; and EVANS, J. M. (1975). "Techniques for Testing the Constancy of Regression Relationships Over Time" (with discussion). Journal of the. Royal Statistical Society, Series B 37, pp. 149-192.
10. CIMINERA, J. L. and TUKEY, J. W. (1989). "Control-Charting Automated Laboratory Instruments When Many Successive Differences May Be Zero". Journal of Quality Technology 21, PP. 7-15.
11. CROARKIN, C. and VARNER, R. (1982). "Measurement Assurance for Dimensional Measurements on Integrated-Circuit Photomasks". NBS Technical Note 1164, U.S. Department of Commerce, Washington, DC.
12. CHOWDER, S. V. and HAMILTON. M. D. (1992). "An EWMA for Monitoring a Process Standard Deviation". Journal of Quality Technology 24, pp. 12-21.
13. DAVIS, R. B. and WOODALL, W. H. (1988). "Performance of the Control Chart Trend Rule Under Linear Shift". Journal of Quality Technology 20, 260-262.
14. FAN, J. and LIN S.-K. (1998). "Test of Significance When Data Are Curves". Journal of the American Statistical Association 93, pp. 1007 1021.
15. GARDNER, M. M.; LU, J. -C.; GYURCSIK, R. S.; WORTMAN, J. J.; HORNUNG, B. E.; HEINISCH, H. H.; RYING, E. A.; RAO, S.; DAVIS, J. C.; and MOZUMDER, P. K. (1997). "Equipment Fault Detection Using Spatial Signatures". IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part C 20, 295-304.
16. GRIMSHAW, S. D. and ALT, F. B. (1997). "Control Charts for Quantile Function Values". Journal of Quality Technology 29, pp. 1-7.
17. HALL, P.; POSKITT, D.; and PRESNELL, B. (2001). "A Functional Data-Analytic Approach to Signal Discrimination". Technometrics 43, pp. 1-24.
18. HAUCK, D. J.; RUNGER, G. C.; and MONTGOMERY, D. C. (1999). "Multivariate Statistical Process Monitoring and Diagnosis with Grouped Regression-Adjusted Variables". Communications in Statistics-Simulation and Computation 28, pp. 309-328.
19. HAWKINS, D. M. (1991). "Multivariate Quality Control Based on Regression-Adjusted Variables". Technometrics 33, pp. 61 75.
20. HAWKINS, D. M. (1993). "Regression Adjustment for Variables in Multivariate Quality Control". Journal of Quality Technology 25, pp. 170-182.
21. HAWKINS, D. M. and MERRIAM, D. F. (1974). "Zonation of Multivariate Sequences of Digitized Geologic Data". Mathematical Geology 6, pp. 263-269.
22. HEMSCH, M.; GRUBB, J.; KRIEGER, W.; and CLER, D. (2000). "Langley Tunnel Data Quality Assurance-Check Standards Results". AIAA 2000-2201, 21st AIAA Advanced Measurement Technology and Ground Testing Conference, June 19-22, Denver, CO.
23. 2 Control Chart". Quality Engineering 5, pp. 619-625.
24. ISO 5725-6. (1994). Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 6. International Organization for Standardization, Geneva, Switzerland.
25. JENSEN, D. R.; HUI, Y. V.; and GHARE, P. M. (1984). "Monitoring an Input-Output Model for Production. I: The Control Charts". Management Science 30, pp. 1197-1206.
26. JIN, J. and SHI, J. (1999). "Feature-Preserving Data Compression of Stamping Tonnage Information Using Wavelets". Technometrics 41, pp. 327-339.
27. JIN, J. and SHI, J. (2001). "Automatic Feature Extraction of Waveform Signals for In-Process Diagnostic Performance Improvement". Journal of Intelligent Manufacturing 12, pp. 257-268.
28. JONES, L. A. and WOODALL, W. H. (1998). "The Performance of Bootstrap Control Charts". Journal of Quality Technology 30, pp. 362-375.
29. JONES, M. C. and RICE, J. A. (1992). "Displaying the Important Features of Large Collections of Similar Curves". American Statistician 46, pp. 140-145.
30. KANG, L. and ALBIN, S. L. (2000). "On-Line Monitoring When the Process Yields a Linear Profile". Journal of Quality Technology 32, pp. 418-426.
31. KIM, K.; MAHMOUD, M. A.; and WOODALL, W. H. (2003). "On the Monitoring of Linear Profiles". Journal of Quality Technology 35, pp. 317-328.
32. KOURTI, T. and MACGREGOR, J. F. (1996). "Multivariate SPC Methods for Process and Product Monitoring". Journal of Quality Technology 28, pp. 409-428.
33. KRESTA, J. V.; MACGREGOR, J. F.; and MARLIN, T. E. (1991). "Multivariate Statistical Monitoring of Process Operating Performance". The Canadian Journal of Chemical Engineering 69, pp. 35-47.
34. KRIEGER, A. M.; POLLAK, M.; and YAKIR, B. (2003). "Surveillance of a Simple Linear Regression". Journal of the American Statistical Association 98, pp. 456-469.
35. LADA, E. K.; LU, J. -C.; and WILSON, J. R (2002). "A Wavelet-Based Procedure for Process Fault Detection". IEEE Transactions on Semiconductor Manufacturing 15, pp. 79-90.
36. LOWRY, C. A.; WOODALL, W. H.; CHAMP, C. W.; and RIGDON, S. E. (1992). "A Multivariate Exponentially Weighted Moving Average Control Chart". Technometrics 34, pp. 46-53.
37. MACGREGOR, J. F (1997). "Using On-Line Process Data to Improve Quality: Challenges for Statisticians". International Statistical Review 65, pp. 309-323.
38. MAHMOUD, M. A. and WOODALL, W. H. (2004a). "Phase I Analysis of Linear Profiles with Calibration Applications". To appear in Technometrics.
39. MAHMOUD, M. A. and WOODALL, W. H. (2004b). "A Change Point Method for Linear Profile Data". Submitted for publication.
40. MESTEK, O.; PAVLIK. J.; and SUCHÁNEK, M. (1994). "Multivariate Control Charts: Control Charts for Calibration Curves". Fresenius' Journal of Analytical Chemistry 350, pp. 344-351.
41. MILLER, A. (2002). "Analysis of Parameter Design Experiments for Signal-Response Systems". Journal of Quality Technology 34, pp. 139-151.
42. MORTELL, R. R. and RUNGER, G. C. (1995). "Statistical Process Control of Multiple Stream Processes". Journal of Quality Technology 27, pp. 1-12.
43. NAIR, V. N.; TAAM, W.; and YE, K. Q. (2002). "Analysis of Functional Responses from Robust Design Studies". Journal of Quality Technology 34, pp. 355-370.
44. RAMSAY, J. O. and SILVERMAN, B. W. (2002). Applied Functional Data Analysis: Methods and Case Studies. Springer, New York, NY.
45. ROSENBLATT, J. R. and SPIEGELMAN, C. H. (1981). Discussion of "A Bayesian Analysis of the Linear Calibration Problem" by W. G. Hunter and W. F. Lamboy. Technometrics 23, pp. 329-333.
46. RUNGER, G. C.; ALT, F. B.; and MONTGOMERY, D. C. (1996). "Controlling Multiple Stream Processes with Principal Components". International Journal of Production Research 34, pp. 2991-2999.
47. RUNGER, G. C. and FOWLER, J. W. (1998). "Run-to-Run Control Charts with Contrasts". Quality & Reliability Engineering International 14, pp. 261-272.
48. SEBER, G. A. F. (1984). Multivariate Observations. John Wiley & Sons, New York, NY.
49. SPITZNER, D. J. and WOODALL, W. H. (2003). "High-dimensional Directed Testing for Monitoring Functional Profiles". Proceedings of the American Statistical Association, pp. 225-236.
50. STOUMBOS, Z. G.; REYNOLDS, M. R., JR.; RYAN, T. P.; and WOODALL, W. H. (2000). "The State of Statistical Process Control as We Proceed into the 21st Century". Journal of the American Statistical Association 95, pp. 992-998.
51. STOVER, F. S. and BRILL, R. V. (1998). "Statistical Quality Control Applied to Ion Chromatography Calibrations". Journal of Chromatography A 804, pp. 37-43.
52. SULLIVAN, J. H. and WOODALL, W. H. (1996). "A Comparison of Multivariate Quality Control Charts for Individual Observations". Journal of Quality Technology 28, pp. 398-408.
53. VARGAS, J. A. (2003). "Robust Estimation in Multivariate Control Charts for Individual Observations". Journal of Quality Technology 35, pp. 367-376.
54. WADE, M. R. and WOODALL, W. H. (1993). "A Review and Analysis of Cause-Selecting Control Charts". Journal of Quality Technology 25, pp. 161-169.
55. WALKER, E. and WRIGHT, S. P. (2002). "Comparing Curves Using Additive Models". Journal of Quality Technology 34, pp. 118-129.
56. WILLIAMS, J. D.; WOODALL, W. H.; and BIRCH, J. B. (2003). "Phase I Monitoring of Nonlinear Profiles". Presented at the 2003 Quality and Productivity Research Conference, Yorktown Heights, New York.
57. WINISTORFER, P. M.; YOUNG, T. M.; and WALKER, E. (1996). "Modeling and Comparing Vertical Density Profiles". Wood and Fiber Science 28, pp. 133-141.
58. WOODALL, W. H. (2000). "Controversies and Contradictions in Statistical Process Control" (with discussion). Journal of Quality Technology 32, pp. 341-378.
59. WOODALL, W. H. and MONTGOMERY, D. C. (1999), "Research Issues and Ideas in Statistical Process Control". Journal of Quality Technology 31, pp. 376-386.
60. WOODALL, W. H. and THOMAS, E. V. (1995). "Statistical Process Control with Several Components of Common Cause Variability". IIE Transactions 27, pp. 757-764.
61. YOUNG, T. M.; WINISTORFER, P. M.; and WANG, S. (1999). "Multivariate Control Charts of MDF and OSB Vertical Density Profile Attributes". Forest Products Journal 49, pp. 79-86.
62. ZHANG, G. X. (1992). Cause-Selecting Control Chart and Diagnosis, Theory and Practice. Aarhus School of Business, Department of Total Quality Management, Aarhus, Denmark.