Statistical process adjustment: A brief retrospective, current status, and some opportunities for further work

Statistica Neerlandica

Volumn 60, Issue 3, 2006, Pages 309-326

  Del Castillo, E ^a  

^a The Pennsylvania State University   (United States)

Author keywords

Bayesian control; Deadband adjustment; Engineering process control; EWMA controllers; Set up adjustment; Time series control

Indexed keywords

EID: 33746323927     PISSN: 00390402     EISSN: 14679574     Source Type: Journal    
DOI: 10.1111/j.1467-9574.2006.00328.x     Document Type: Article

References (60)

1. AKAIKE, H. (1967), Some problems in the application of the cross-spectral method, in: B. Harris (ed.), Advanced seminar on spectral analysis of time series, Wiley, New York.
2. APLEY, D. W. (2004), A cautious minimum variance controller with ARIMA disturbances, IIE Transactions 36, 417-432.
3. APLEY, D. W. and J. KIM (2004), Cautious control of industrial process variability with uncertain input and disturbance model parameters, Technometrics 46, 188-199.
4. ÅSTRÖM, K. J. (1967), Computer control of a paper machine - an application of linear stochastic control, IBM Journal of Research & Development 11, 389-405.
5. ÅSTRÖM, K. J. (1970), Introduction to stochastic, control theory, Academic Press, San Diego, CA.
6. ÅSTRÖM, K. J. and B. WITTENMARK (1989), Adaptive control, Addison-Wesley, Reading, MA.
7. BALAKRISHNAN, S. and D. MADIGAN (2004), A one-pass sequential Monte Carlo method for Bayesian analysis of massive datasets, Technical Paper, http://www.stat.rutgers.edu/madigan/papers/.
8. BARNARD, G. A. (1959), Control charts and stochastic processes, Journal of the Royal Statistical Society B 21, 239-211.
9. BISHOP, A. B. (1965), Automation of the quality control function, Industrial Quality Control 21, 509-514.
10. Box, G. E. P. and G. M. JENKINS (1962), Some statistical aspects of adaptive optimization and control, Journal of the Royal Statistical Society B 24, 297-343.
11. Box, G. E. P., and G. M. JENKINS (1963), Further contributions to adaptive quality control: simultaneous estimation of dynamics: no-zero costs, ISI Bulletin, 34th session, Ottawa, Canada, 943-974.
12. Box, G. E. P. and A. LUCEÑO (1997). Statistical control by monitoring and feedback adjustment, John Wiley & Sons, New York.
13. Box, G. E. P. and J. F. MACGREGOR (1974), The analysis of closed-loop dynamic stochastic systems, Technometrics 16, 391-398.
14. Box, G. E. P. and J. F. MACGREGOR (1976), Parameter estimation with closed-loop operating data, Technometrics 18, 371-380.
15. Box, G. E. P., G. M. JENKINS and G. REINSEL (1994), Time series analysis, forecasting and control, 3rd edn, Prentice-Hall, Englewood Cliffs, NJ.
16. BRAUN, M. W., S. T. JENKINS and N. S. PATEL (2003), A comparison of supervisory control algorithms for tool/process disturbance tracking, Proceedings of the American Control Conference, Denver, CO, 2626-2631.
17. BUTLER, S. W. and J. A. STEFANI (1994), Supervisory run-to-run control of a polysilicon gate etch using in situ ellipsometry, IEEE Transactions on Semiconductor Manufacturing 7, 193-201.
18. COLOSIMO, B. M., R. PAN and E. DEL CASTILLO (2004), A sequential Markov Chain Monte Carlo approach to setup process adjustment over a set of lots, Journal Applied Statistics 31, 499-520.
19. CROWDER, S. V. (1992), An SPC model for short production runs: minimizing expected cost, Technometrics 34, 64-73.
20. CROWDER, S. V. and L. ESHLEMAN (2001), Small sample properties of an adaptive filter applied to low volume SPC, Journal of Quality Technology 33, 29-38.
21. DEL CASTILLO, E. (1998), A note on two process adjustment models, Quality & Reliability Engineering International 14, 23-28.
22. DEL CASTILLO, E. (1999), Long-run and transient analysis of a double EWMA feedback controller, IIE Transactions 31, 1157-1169.
23. DELCASTILLO, E. (2002), Statistical process adjustment for quality control (Probability and Statistics Series), John Wiley & Sons, New York.
24. DEL CASTILLO, E. (2005), Statistical process adjustment: a brief retrospective, current status, and some opportunities for further research, Technical Report, Engineering Statistics Laboratory, Penn State University, http://www2.ie.psu.edu/Castillo/research/EngineeringStatistics/.
25. DEL CASTILLO, E., R. PAN and B. M. COLOSIMO (2003), A unifying view of some process adjustment methods, Journal of Quality Technology 35, 286-293.
26. DEMING, W. E. (1982), Out of the crisis, MIT Center for Advanced Engineering Study, Cambridge, MA.
27. DOUCET, A., N. DE FREITAS and N. GORDON (2001), Sequential Monte Carlo methods in practice, Springer-Verlag, New York.
28. FALTIN, F. W., G. J. HAHN, W. T. TUCKER and S. A. VANDER WEIL (1993), Algorithmic statistical process control: some practical observations, International Statistical Institute 61, 67-80.
29. GELMAN, A., J. B. CARLIN, H. S. STERN and D. B. RUBIN (2003), Bayesian data analysis, 2nd edn, Boca Raton, FL, Chapman & Hall/CRC.
30. GRUBBS, F. E. (1954), An optimum procedure for setting machines or adjusting processes, Industrial Quality Control, July 1954
31. reprinted in Journal of Quality Technology 15, 1983, 186-189.
32. GUO, R. S., A. CHEN, A. and J. J. CHEN (2000), An enhanced EWMA controller for processes subject to random disturbances, in: J. MOYNE, E. DEL CASTILLO and A. HURWITZ (eds.), Run to run process control in semiconductor manufacturing, CRC Press, Boca Raton, FL.
33. HAMBY, E. S., P. T. KABAMBA and P. KHARGONEKAR (1998), A probabilistic approach to run to run control, IEEE Transactions on Semiconductor Manufacturing 11, 654-669.
34. INGOLFSSON, A. and E. SACHS (1993), Stability and sensitivity of an EWMA controller, Journal of Quality Technology 25, 271-287.
35. JENSEN, K. L. and S. B. VARDEMAN (1993), Optimal adjustment in the presence of deterministic process drift and random adjustment error, Technometrics 35, 376-389.
36. JIANG, E. and K.-L. TSUI (2002), SPC monitoring of MMSE- and PI-controlled processes, Journal of Quality Technology 34, 384-398.
37. LIAN, Z. and E. DEL CASTILLO (2006), Setup adjustment under unknown process parameters and fixed adjustment cost, Journal of Statistical Planning and Inference 136, 1039-1060.
38. LIAN, Z., B. M. COLOSIMO and E. DEL CASTILLO (2005a), Setup adjustment of multiple lots using a sequential Monte Carlo method, accepted for publication in Technometrics.
39. LIAN, Z., B. M. COLOSIMO and E. DEL CASTILLO (2005b), Setup error adjustment: sensitivity analysis and a new MCMC control rule, to appear in Quality & Reliability Engineering International.
40. LJUNG, L. (1999), System identification: theory for the U user, 2nd edn, Prentice-Hall, Upper Saddle River, NJ.
41. LUCEÑO, A. (2003), Dead-band adjustment schemes for on-line F feedback quality control, in: R. KHATTREE and C.R. RAO (eds.), Handbook of Statistics, Vol. 22, Elsevier Science BV, Berlin.
42. MACGREGOR, J. F. (1988), On-line statistical process control. Chemical Engineering Progress, October, 21-31.
43. MACGREGOR, J. F. and D. T. FOGAL (1995), Closed-loop identification: the role of the noise model and prefilters, Journal of Process Control 5, 163-171.
44. MILLIKEN, G. A. and D. E. JOHNSON (1984), Analysis of messy data. Van Nostrand Reinhold, New York.
45. MOYNE, J., E. DEL CASTILLO and A. HURWITZ (eds.) 2000), Run to run process control for semiconductor manufacturing, CRC Press, Boca Raton, FL.
46. NINNESS B., S. HENRIKSEN and T. BRINSMEAD (2002), System identification via a computational Bayesian approach, Proceedings of the 4th IEEE Conference on Decision and Control, Las Vegas, NE, 1820-1825.
47. PAN, R. and E. DEL CASTILLO (2003), Integration of sequential process adjustment and process monitoring techniques, Quality & Reliability Engineering International 19, 371-386.
48. PAN, R. and E. DEL CASTILLO (2004), Scheduling methods for the setup adjustment problem. International Journal of Productions Research 41 1467-1481, (2003). Correction, 42, 211-212.
49. SACHS, E., A. HU and A. INGOLFSSON (1995), Run by run process control: combining SPC and feedback control, IEEE Transactions on Semiconductor Manufacturing 8, 26-43.
50. SÖDERSTRÖM, T., I. GUSTAVSSON and L. LJUNG (1975), Identifiability conditions for linear systems operating in closed loop, International Journal of Control 21, 243-255.
51. SÖDERSTRÖM, T., L. LJUNG and I. GUSTAVSSON (1976), Identifiability conditions for linear multi-variate systems operating under feedback, IEEE Transactions on Automatic. Control 21, 837-840.
52. THIL, S. and M. GILSON(2004), Closed loop identification: a Bayesian approach, Working paper, Centre de Recherche en Automatique de Nancy (CRAN).
53. TRIETSCH, D. (1998), The harmonic rule for process setup adjustment with quadratic loss, Journal of Quality Technology 30, 75-84.
54. TRIETSCH, D. (2000), Process setup adjustment with quadratic loss, IIE Transactions 32, 299-307.
55. TSENG, S.-T., R. J. CHOU and S. P. LEE (2002), Statistical design of double EWMA controller, Applied Stochastic Models in Business and Industry 18, 313-322.
56. TSUNG, F. and J. J. SHI (1999), Integrated design of run to run PID controllers and SPC monitoring for process disturbance rejection, IIE Transactions 31, 517-527.
57. TSUNG, F. and K. L. TSUI (2003), A mean-shift pattern study on the integration of SPC and APC for process monitoring, IIE Transactions, 35, 231-242.
58. TUCKER, W. T., F. W. FALTIN and S. A. VANDER WIEL (1993), ASPC: an elaboration, Technometrics, 35, 363-375.
59. VANDER WIEL, S. A., W. T. TUCKER, F. W. FALTIN and N. DOGANAKSOY (1992), Algorithmic statistical process control: concepts and an application, Technometrics 34, 286-297.
60. YANG, J. and V. MAKIS (2000), Dynamic response of residuals to external deviations in a controlled production process, Technometrics 42, 290-299.