An approach to quantify the financial benefit of embedding sensors into products for end-of-life management: A case study

Production Planning and Control

Volumn 25, Issue 1, 2014, Pages 26-43

  Ilgin, Mehmet Ali ^a   Ondemir, Onder ^b   Gupta, Surendra M ^c  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b YILDIZ TECHNICAL UNIVERSITY   (Turkey)

^c NORTHEASTERN UNIVERSITY   (United States)

Author keywords

Disassembly line; Just in time; Multi kanban system; Orthogonal arrays; Reverse logistics; Sensorembedded products

Indexed keywords

DISASSEMBLY LINE; JUST IN TIME; MULTI-KANBAN SYSTEM; ORTHOGONAL ARRAY; REVERSE LOGISTICS; SENSOREMBEDDED PRODUCTS;

JUST IN TIME PRODUCTION; STOCHASTIC SYSTEMS;

SENSORS;

EID: 84889781332     PISSN: 09537287     EISSN: 13665871     Source Type: Journal    
DOI: 10.1080/09537287.2012.655801     Document Type: Article

References (35)

1. Akcali, E. and Cetinkaya, S., 2011. Quantitative models for inventory and production planning in closed-loop supply chains. International Journal of Production Research, 49 (8), 2373-2407.
2. Akcali, E., Cetinkaya, S., and Uster, H., 2009. Network design for reverse and closed-loop supply chains: an annotated bibliography of models and solution approaches. Networks, 53 (3), 231-248.
3. Chan, H.K., Yin, S., and Chan, F.T.S., 2010. Implementing just-in-time philosophy to reverse logistics systems: a review. International Journal of Production Research, 48 (21), 6293-6313.
4. Cheng, F.T., et al., 2004. A generic embedded device for retrieving and transmitting information of various customized applications. In: Proceedings of the 2004 IEEE international conference on robotics and automation, 26 April-1 May 2004, New Orleans, LA, 978-983.
5. Ferguson, N. and Browne, J., 2001. Issues in end-of-life product recovery and reverse logistics. Production Planning & Control, 12 (5), 534-547.
6. Gungor, A. and Gupta, S.M., 1999. Issues in environmentally conscious manufacturing and product recovery: a survey. Computers and Industrial Engineering, 36 (4), 811-853.
7. Gungor, A. and Gupta, S.M., 2001. A solution approach to the disassembly line balancing problem in the presence of task failures. International Journal of Production Research, 39 (7), 1427-1467.
8. Gungor, A. and Gupta, S.M., 2002. Disassembly line in product recovery. International Journal of Production Research, 40 (11), 2569-2589.
9. Gupta, S.M. and Al-Turki, Y.A.Y., 1997. An algorithm to dynamically adjust the number of kanbans in a stochastic processing times and variable demand environment. Production Planning & Control, 8 (2), 133-141.
10. Ijomah, W.L. and Childe, S.J., 2007. A model of the operations concerned in remanufacture. International Journal of Production Research, 45 (24), 5857-5880.
11. Ilgin, M.A. and Gupta, S.M., 2010. Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. Journal of Environmental Management, 91 (3), 563-591.
12. Kazmierczak, K., Neumann, W.P., and Winkel, J., 2007. A case study of serial-flow car disassembly: ergonomics, productivity and potential system performance. Human Factors and Ergonomics in Manufacturing, 17 (4), 331-351.
13. Kelton, D.W., Sadowski, R.P., and Sadowski, D.A., 2007. Simulation with arena. New York, NY: McGraw-Hill.
14. Kizilkaya, E.A. and Gupta, S.M., 2006. Dynamic kanban system for disassembly line applied to an industrial voice recognition client unit. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing VI, 1-3 October 2006, Boston, MA, 22-29.
15. Klausner, M., Grimm, W.M., and Hendrickson, C., 1998. Reuse of electric motors in consumer products. Journal of Industrial Ecology, 2 (2), 89-102.
16. Lambert, A.J.D. and Gupta, S.M., 2005. Disassembly modeling for assembly, maintenance, reuse, and recycling. Boca Raton, FL: CRC Press.
17. Lambert, A.J.D. and Gupta, S.M., 2008. Methods for optimum and near optimum disassembly sequencing. International Journal of Production Research, 46 (11), 2845-2865.
18. Law, A.M., 2007. Simulation modeling and analysis. New York, NY: McGraw Hill.
19. McGovern, S.M. and Gupta, S.M., 2011. The disassembly line: balancing and modeling. New York: McGraw Hill.
20. Meyer, G.G., Främling, K., and Holmström, J., 2009. Intelligent products: a survey. Computers in Industry, 60 (3), 137-148.
21. Phadke, M.S., 1989. Quality engineering using robust design. Englewood Cliffs, NJ: Prentice Hall.
22. Pochampally, K.K., Nukala, S., and Gupta, S.M., 2009. Strategic planning models for reverse and closed-loop supply chains. Boca Raton, FL: CRC Press.
23. Simon, M., et al., 2001. Modelling of the life cycle of products with data acquisition features. Computers in Industry, 45 (2), 111-122.
24. Taleb, K.N., Gupta, S.M., and Brennan, L., 1997. Disassembly of complex product structures with parts and materials commonality. Production Planning & Control, 8 (3), 255-269.
25. Tang, Y., Zhou, M., and Gao, M., 2006. Fuzzy-petri-net based disassembly planning considering human factors. IEEE Transactions on Systems, Man, and Cybernetics Part A: Systems and Humans, 36 (4), 718-726.
26. Udomsawat, G. and Gupta, S.M., 2005a. The effect of sudden server breakdown on the performance of a disassembly line. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing V, 23-24 October 2005, Boston, MA. Bellingham, WA: SPIE, 93-102.
27. Udomsawat, G. and Gupta, S.M., 2005b. Multi-kanban in disassembly line with component-discriminating demand. In: Proceedings of the 2005 northeast decision sciences institute conference, 30 March-1 April, Philadelphia, PA.
28. Udomsawat, G. and Gupta, S.M., 2005c. Multi-kanban mechanism for appliance disassembly. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing V, 23-24 October 2005, Boston, MA. Bellingham, WA: SPIE, 30-41.
29. Udomsawat, G. and Gupta, S.M., 2006. Controlling disassembly line with multi-kanban system. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing VI, 1-3 October 2006, Boston, MA. Bellingham, WA: SPIE, 42-53.
30. Udomsawat, G. and Gupta, S.M., 2008. Multikanban system for disassembly line. In: S.M. Gupta and A.J.D. Lambert, eds. Environment conscious manufacturing. Boca Raton, FL: CRC Press, 311-330.
31. Udomsawat, G., Gupta, S.M., and Al-Turki, Y.A.Y., 2003a. Multi-kanban model for disassembly line with demand fluctuation. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing III, 29-30 October 2003, Providence, RI. Bellingham, WA: SPIE, 85-93.
32. Udomsawat, G., Gupta, S.M., and Kamarthi, S.V., 2003b. A multi-kanban model for disassembly. In: Proceedings of the 2003 northeast decision sciences institute conference, 27-29 March, Providence, RI, 169-171.
33. Vadde, S., et al., 2008. Product life cycle monitoring via embedded sensors. In: S.M. Gupta and A.J.D. Lambert, eds. Environment conscious manufacturing. Boca Raton, FL: CRC Press, 91-103.
34. Willems, B., Dewulf, W., and Duflou, J.R., 2006. Can largescale disassembly be profitable? A linear programming approach to quantifying the turning point to make disassembly economically viable. International Journal of Production Research, 44 (6), 1125-1146.
35. Yang, X., Moore, P., and Chong, S.K., 2009. Intelligent products: from lifecycle data acquisition to enabling product-related services. Computers in Industry, 60 (3), 184-194.