Implementing just-in-time philosophy to reverse logistics systems: A review

International Journal of Production Research

Volumn 48, Issue 21, 2010, Pages 6293-6313

  Chan, Hing Kai ^a   Yin, Shizhao ^a   Chan, Felix T S ^b  

^a UNIVERSITY OF EAST ANGLIA   (United Kingdom)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

environment; just in time; reverse logistics; supply chain management

Indexed keywords

DEMAND AND SUPPLY; ENVIRONMENT; IMPACT ON THE ENVIRONMENT; INFORMATION SYSTEM MODEL; JUST IN TIME; LITERATURE REVIEWS; PROCESS MODEL; PRODUCT LIFE CYCLE MANAGEMENT; PRODUCT LIFE CYCLES; REVERSE LOGISTICS;

INFORMATION SYSTEMS; JUST IN TIME PRODUCTION; LIFE CYCLE; PHILOSOPHICAL ASPECTS; SUPPLY CHAIN MANAGEMENT; SUPPLY CHAINS;

LOGISTICS;

EID: 77956696814     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207540903225213     Document Type: Article

References (137)

1. Achanga, P., 2006. Critical success factors for lean implementation within SMEs. Journal of Manufacturing Technology Management, 17 (4), 460-471.
2. Alptekinoglu, A. and Tang, C.S., 2005. A model for analyzing multi-channel distribution systems. European Journal of Operational Research, 163 (3), 802-824.
3. Amini, M., Retzlaff-Roberts, D., and Bienstock, C., 2005. Designing a reverse logistics operation for short cycle time repair services. International Journal of Production Economics, 96 (3), 367-380.
4. Asiedu, Y. and Gu, P., 1998. Product life cycle cost analysis of the art review. International Journal of Production Research, 36 (4), 883-908.
5. Autry, C.W., Daugherty, P.J., and Richey, R.G., 2001. The challenge of reverse logistics in catalog retailing. International Journal of Physical Distribution & Logistics, 31 (1), 26-37.
6. Barros, A.I., Dekker, R., and Scholten, V., 1998. A two-level network for recycling sand: a case study. European Journal of Operational Research, 110, 199-214.
7. Bayndr, Z.P., Dekker, R., and Porras, E., 2006. Determination of recovery effort for a probabilistic recovery system under various inventory control policies. Omega, 34 (6), 571-584.
8. Beltran, J.L. and Krass, D., 2002. Dynamic lot sizing with returning items and disposals. IIE Transactions, 34 (5), 437-448.
9. Bemon, M. and Cullen, J., 2007. An integrated approach to managing reverse logistics. International Journal of Logistics: Research and Applications, 10 (1), 41-56.
10. Beullens, P., 2004. Reverse logistics in effective recovery of products from waste materials. Environmental Science & Bio/Technology, 3, 283-306.
11. Bogataj, M. and Bogataj, L., 2004. On the compact presentation of the lead times perturbations in distribution networks. International Journal of Production Economics, 88 (2), 145-155.
12. Bollen, N., 1999. Real options and product life cycles. Management Science, 45 (5), 670-684.
13. Campbell, A., Clarke, L. and Savelsbergh, M.W.P., 1999. Inventory routing in practice. In: P. Toth and D. Vigo, eds. The vehicle routing problem. United States: Society for Industrial and Applied Mathematics, 309-330.
14. Chan, F.T.S. and Chan, H.K., 2008. A survey on reverse logistics system of mobile phone industry in Hong Kong. Management Decision, 46 (5), 702-708.
15. Chan, F.T.S., Chung, S.H., and Wadhwa, S., 2005. A hybrid genetic algorithm for production and distribution. Omega, 33 (4), 345-355.
16. Chan, H.K., 2007. A proactive and collaborative approach to reverse logistics-a case study. Production Planning & Control, 18 (4), 350-360.
17. Chan, Y., Carter, W.B., and Burnes, M.D., 2001. A multiple-depot, multiple-vehicle, locationrouting problem with stochastically processed demands. Computers & Operations Research, 28 (8), 803-826.
18. Chen, C. and Lee, W., 2004. Multi-objective optimization of multi-echelon supply chain networks with uncertain product demands and prices. Computers & Chemical Engineering, 28 (6-7), 1131-1144.
19. Cheng, T.C.E. and Ngai, E.W.T., 1998. Computer-based technologies to support operations management in Hong Kong. International Journal of Operations & Production Management, 18 (7), 654-660.
20. Chuang, B., Ouyang, L., and Chuang, K., 2004. A note on periodic review inventory model with controllable setup cost and lead time. Computers & Operations Research, 31 (4), 549-561.
21. Chung, C.J. and Wee, H.M., 2008. Green-component life-cycle value on design and reverse manufacturing in semi-closed supply chain. International Journal of Production Economics, 113 (2), 528-545.
22. Claycomb, C., Germain, R., and Gröge, C., 1999. Total system JIT outcomes: Inventory, organization and financial effects. International Journal of Physical Distribution & Logistics Management, 29 (10), 612-630.
23. Closs, D.J. and Xu, K., 2000. Logistics information technology practice in manufacturing and merchandising firms. International Journal of Physical Distribution & Logistics Management, 30 (10), 869-886.
24. Culaba, A.B. and Purvis, M.R.I., 1999. A methodology for the life cycle and sustainability analysis of manufacturing process. Journal of Cleaner Production, 7 (6), 435-445.
25. Das, A. and Handfield, R.B., 1997. Just-in-time and logistics in global sourcing: an empirical study. International Journal of Physical Distribution & Logistics, 27 (3/4), 244-259.
26. Dasci, A. and Verter, V., 2001. A continuous model for production-distribution system design. European Journal of Operational Research, 129 (2), 287-298.
27. Daugherty, P., Myers, M.B., and Richey, R.G., 2002. Information support for reverse logistics: the influence of relationship commitment. Journal of Business Logistics, 23 (1), 85-106.
28. Disney, S.M., Naim, M.M., and Towill, D.R., 1997. Dynamic simulation modelling for lean logistics. International Journal of Physical Distribution & Logistics Management, 27 (3/4), 174-196.
29. Dobos, I., 2003. Optimal production-inventory strategies for a HMMS-type reverse logistics system. International Journal of Production Economics, 81/82, 351-360.
30. Dobos, I. and Richter, K., 2006. A production/recycling model with quality consideration. International Journal of Production Economics, 104 (2), 571-579.
31. Dowlatshahi, S., 2000. Developing a theory of reverse logistics. Interfaces, 30 (3), 143-155.
32. Dowlatshahi, S., 2005. A strategic framework for the design and implementation of remanufacturing operations in reverse-logistics. International Journal of Production Research, 43 (16), 3455-3480.
33. Duclos, L., Siha, S., and Lummus, R., 1995. JIT in services: a review of current practices and future direction for research. International Journal of Service Industry Management, 6 (6), 36-52.
34. Ekvall, E., 1999. Key methodological issues for life cycle inventory analysis of paper recycling. Journal of Cleaner Production, 7 (4), 281-294.
35. Eskigun, E., et al., 2005. Outbound supply chain network design with mode selection, lead times and capacitated vehicle distribution centres. European Journal of Operational Research, 165 (1), 182-206.
36. Farahani, R.Z. and Elahipanah, M., 2008. A genetic algorithm to optimize the total cost and service level for just-in-time distribution in a supply chain. International Journal of Production Economics, 111 (2), 229-243.
37. Ferrer, G. and Swaminathan, J.M., 2006. Managing news and remanufactured products. Management Science, 52 (1), 15-26.
38. Figueiredo, J.N. and Mayerle, S.F., 2008. Designing minimum-cost recycling collection networks with required throughput. Transportation Research Part E: Logistics and Transportation Review, 44 (5), 731-752.
39. Fleischmann, M., 2003. Reverse logistics network structures and design. In: V.D.R. Guide and L.N. van Wassenhove, eds. Business aspects of closed-loop supply chains. Pittsburgh, PA: Carnegie Mellon University Press, 117-148.
40. Fleischmann, M., et al., 2000. A characterization of logistics networks for product recovery. Omega, 28 (6), 653-666.
41. Fleischmann, M. and Kuik, R., 2003. On optimal inventory control with independent stochastic item returns. European Journal of Operational Research, 151 (1), 25-37.
42. Flygansvar, B.M., Gadde, L.E., and Haugland, S.A., 2008. Coordinated action in reverse distribution systems. International Journal of Physical Distribution & Logistics Management, 38 (1), 5-20.
43. Fullerton, R.R. and McWatters, C.S., 2001. The production performance benefits from JIT implementation. Journal of Operation Management, 19 (1), 81-96.
44. Giagis, G.M., Tatarakis, I., and Zeimpekis, V., 2004. Minimizing logistics risk through real-time vehicle routing and mobile technologies: research to date and future trends. International Journal of Physical Distribution & Logistics Management, 34 (9), 749-764.
45. Goldsby, T. and Closs, D., 2000. Using activity-based costing to reengineer the reverse logistics channel. International Journal of Physical Distribution & Logistics Management, 30 (6), 500-514.
46. Guide, V.D.R., 2000. Production planning and control for remanufacturing: industry practice and research needs. Journal of Operations Management, 18 (4), 467-483.
47. Gyampah, K.A. and Gargeya, V.B., 2001. Just-in-time manufacturing in Ghana. Industrial Management & Data systems, 101 (3), 106-113.
48. Han, C. and Damrongwongsiri, M., 2005. Stochastic modelling of a two-echelon multiple sourcing supply chain system with genetic algorithm. Journal of Manufacturing Technology, 16 (1), 87-108.
49. Harber, D., et al., 1990. Just-in-time and the issue of implementation. International Journal of Operations & Production Management, 10 (1), 21-30.
50. Hill, R.M., 1999. The optimal production and shipment policy the single-vendor single-buyer integrated production-inventory problem. International Journal of Production Research, 37 (11), 2463-2475.
51. Holweg, M., 2007. The genealogy of lean production. Journal of Operations Management, 25 (2), 420-437.
52. Horvath, P.A., Autry, C.W., and Wilcox, W.E., 2005. Liquidity implications of reverse logistics for retailers: a Markov chain approach.. Journal of Retailing, 81 (2), 191-203.
53. Huang, C.-K., 2004. An optimal policy for a single-vendor single-buyer integrated productioninventory problem with process unreliability consideration. International Journal of Production Economics, 91 (1), 91-98.
54. Inderfurth, K., 2004. Optimal policies in hybrid manufacturing/ remanufacturing systems with product substitution. International Journal of Production Economics, 90 (3), 325-343.
55. Inderfurth, K., 2005. Impact of uncertainties on recovery behaviour in a remanufacturing environment. International Journal of Physical Distribution & Logistics Management, 35 (5), 318-336.
56. Jayaraman, V., 1998. Transportation, facility location and inventory issues in distribution network design: an investigation. International Journal of Operations & Production Management, 18 (5), 471-494.
57. Jayaraman, V., Guide, V.D.R., and Srivastava, R., 1999. A closed-loop logistics model for remanufacturing. Journal of the Operational Research Society, 50 (5), 497-508.
58. Jayaraman, V., Patterson, R.A., and Rolland, E., 2003. The design of reverse distribution networks: models and solution procedures. European Journal of Operational Research, 150 (1), 128-149.
59. Jayaraman, V. and Pirkul, H., 2001. Planning and coordination of production and distribution facilities for multiple commodities. European Journal of Operational Research, 133 (2), 394-408.
60. Jayaraman, V. and Ross, A., 2003. A simulated annealing methodology to distribution network design and management. European Journal of Operational Research, 144 (3), 629-645.
61. Jones, D.T., Hines, P., and Rich, N., 1997. Lean logistics. International Journal of Physical Distribution & Logistics, 27 (3/4), 153-173.
62. Kazazi, A., 1994. A method for assessing JIT effectiveness. Industrial Management & Data System, 94 (7), 14-17.
63. Kelle, P. and Miller, P., 1998. Transition to just-in-time purchasing: handling uncertain deliveries with vendor-purchaser co-operation. International Journal of Operations & Production Management, 18 (1), 53-65.
64. Kiesmüller, G.P., 2003. Optimal control of a one product recovery system with leadtimes. International Journal of Production Economics, 81-82, 333-340.
65. Kim, S.-L. and Ha, D., 2003. A JIT lot-splitting model for supply chain management: enhancing buyer-supplier linkage. International Journal of Production Economics, 86 (1), 1-10.
66. Kleber, R., Minner, S., and Kiesmüller, G., 2002. A continuous time inventory model for a product recovery system with multiple options. International Journal of Production Economics, 79 (2), 121-141.
67. Klepper, S., 1996. Entry, exit, growth, and innovation over the product life cycle. The American Economic Review, 86 (3), 562-583.
68. Knemeyer, A.M., Ponzurick, T.G., and Logar, C.M., 2002. A qualitative examination of factors affecting reverse logistics systems for end-of-life computers. International Journal of Physical Distribution & Logistics, 32 (6), 455-479.
69. Koh, S.G., et al., 2002. An optimal ordering and recovery policy for reusable items. Computers and Industrial Engineering, 43 (1/2), 59-73.
70. Korpela, J. and Lehmusvaara, A., 1999. A customer oriented approach to warehouse network evaluation and design. International Journal of Production Economics, 59 (1/3), 135-146.
71. Krikke, H.R., Van Harten, A., and Schuur, P.C., 1999. Business case Roteb: recovery strategies for monitors. Computers & Industrial Engineering, 36 (4), 739-757.
72. Krikke, H., et al., 2008. Low-frequency collection of materials disassembled from end-of-life vehicles on the value of on-line monitoring in optimizing route planning. International Journal of Production Economics, 111 (2), 209-228.
73. Kroon, L. and Vrijens, G., 1995. Returnable containers: An example of reverse logistics. International Journal of Physical Distribution & Logistics Management, 25 (2), 56-68.
74. Kros, J., Falasca, M., and Nadler, S., 2006. Impact of just-in-time inventory systems on OEM suppliers. Industrial Management & Data System, 106 (2), 224-241.
75. Kumar, C. and Panneerselvam, R., 2007. Literature review of JIT-KANBAN system. The International Journal of Advanced Manufacturing Technology, 32 (3/4), 393-408.
76. Laan, E., et al., 1999. Inventory control in hybrid systems with remanufacturing. Management Science, 45 (5), 733-747.
77. Liu, S. and Boyle, I.M., 2009. Engineering Design: perspectives, challenges and recent advances. Journal of Engineering Design, 20 (1), 7-19.
78. Liu, S., et al., 2009. Integration of decision support systems to improve decision support performance. Knowledge and Information Systems: An International Journal, in press, DOI: 10.1007/S10115-009-0192-4.
79. Liu, S., McMahon, C.A., and Culley, S.J., 2008. A review of structured document retrieval (SDR) technology to improve information access performance in engineering document management. Computers in Industry, 59 (1), 3-16.
80. Mahadevan, B., Pyke, D.F., and Fleischmann, M., 2003. Periodic review, push inventory policies for remanufacturing. European Journal of Operational Research, 151 (3), 536-551.
81. Mattsson, S., 2007. Inventory control in environments with short lead times. International Journal of Physical Distribution & Logistics Management, 7 (2), 115-130.
82. McLaughlin, C.P., Vastag, G., and Whybark, D.C., 1994. Statistical inventory control in theory and practice. International Journal of Production Economics, 35 (1/3), 161-169.
83. Melachrinoudis, E., Messac, A., and Min, H., 2005. Consolidating a warehouse network: a physical programming approach. International Journal of Production Economics, 97 (1), 1-17.
84. Min, H. and Ko, H.J., 2008. The dynamic design of a reverse logistics network from the perspective of third-party logistics service providers. International Journal of Production Economics, 113 (1), 176-192.
85. Minner, S., 2001. Strategic safety stocks in reverse logistics supply chains. International Journal of Production Economics, 71 (1/3), 417-428.
86. Minner, S., 2003. Multiple-supplier inventory models in supply chain management: a review. International Journal of Production Economics, 81/82, 265-279.
87. Miranda, P.A. and Garrido, R.A., 2004. Incorporating inventory control decisions into a strategic distribution network design model with stochastic demand. Transportation Research Part E: Logistics and Transportation Review, 40 (3), 183-207.
88. Mistry, J.J., 2005. Origins of profitability through JIT processes in the supply chain. Industrial Management & Data System, 105 (6), 752-768.
89. Mitra, S., 2006. Analysis of a two-echelon inventory system with returns. Omega, 37 (1), 106-115.
90. Mitra, S., 2007. Revenue management for remanufactured products. Omega, 35 (5), 553-562.
91. Mollenkopf, D., Russo, I., and Frankel, R., 2007. The returns management process in supply chain strategy. International Journal of Physical Distribution & Logistics Management, 37 (7), 568-592.
92. Nä slund, D., 2008. Lean, six sigma and lean sigma: fads or real process improvement methods̈ Business Process Management Journal, 14 (3), 269-287.
93. Patel, N. and Irani, Z., 1999. Evaluating information technology in dynamic environments: a focus on tailorable information system. Logistics Information Management, 12 (1/2), 32-39.
94. Pokharel, S., 2006. Perception on information and communication technology perspectives in logistics: a study of transportation and warehouses sectors in Singapore. The Journal of Enterprise Information Management, 18 (2), 136-149.
95. Qu, W.W., Bookbinder, J.H., and Iyogun, P., 1999. An integrated inventory-transportation system with modified periodic policy for multiple products. European Journal of Operational Research, 115 (2), 254-269.
96. Reck, R.F., Landeros, R., and Lyth, D.M., 1992. Integrated supply management: the basis for professional development. International Journal of Purchasing and Materials Management, 28 (3), 12-18.
97. Remeny, D. and Smith, M., 1999. Maximise information systems value by continuous participative evaluation. Logistics Information Management, 12 (1/2), 14-31.
98. Richey, R.G., et al., 2004. Reverse logistics: the impact of timing and resources. Journal of Business Logistics, 25 (2), 229-250.
99. Richey, R.G., Genchev, S.E., and Daugherty, P.J., 2005. The role of resource commitment and innovation in reverse logistics performance. International Journal of Physical Distribution & Logistics Management, 35 (4), 233-257.
100. Richter, K. and Dobos, I., 2004. An extended production/recycling model with stationary demand and return rates. International Journal of Production Economics, 90 (3), 311-323.
101. Rogers, D.S. and Tibben-Lembke, R.S., 2001. An examination of reverse logistics practices. Journal of Business Logistics, 22 (2), 129-148.
102. Rubio, S. and Corominas, A., 2008. Optimal Manufacturing-remanufacturing policies in a lean production environment. Computers & Industrial Engineering, 55 (1), 234-242.
103. Sackett, P. and Bryan, M., 1998. Framework for the development of a product data management strategy. International Journal of Operations & Production Management, 18 (2), 168-179.
104. Savaskan, R.C. and Van Wassenhove, L.N., 2006. Reverse channel design: the case of competing retailers. Management Science, 52 (1), 1-14.
105. Schniederjans, M. and Cao, Q., 2001. An alternative analysis of inventory costs of JIT and EOQ purchasing. International Journal of Physical Distribution & Logistics, 31 (2), 109-123.
106. See, W., 2007. Wireless technologies for logistic distribution process. Journal of Manufacturing Technology Management, 18 (7), 876-888.
107. Simpson, M., Sykes, G., and Abdullah, A., 1998. Case study: transitory JIT at Proton Cars, Malaysia. International Journal of Physical Distribution & Logistics, 28 (2), 121-142.
108. Singer, M., Donoso, P., and Traverso, P., 2003. Quality strategies in supply chain alliances of disposable items. Omega, 31 (6), 499-509.
109. Smith, A.D., 2005. Reverse logistics programs: gauging their effects on CRM and online behavior. The Journal of Information and Knowledge Management System, 35 (3), 166-181.
110. Spencer, M.S., Rogers, D.S., and Daugherth, P.J., 1994. JIT systems and external logistics suppliers. International Journal of Operations & Production Management, 14 (6), 60-74.
111. Srinidhi, B. and Tayi, G., 2004. Just in time or just in case? An explanatory model with informational and incentive effects. Journal of Manufacturing Technology Management, 15 (7), 567-574.
112. Srivastava, S.K., 2008. Network design for reverse logistics. Omega, 36 (4), 535-548.
113. Srivastava, S.K. and Srivastava, R.K., 2006. Managing product returns for reverse logistics. International Journal of Physical Distribution & Logistics Management, 36 (7), 524-546.
114. Stock, J., 1997. Applying theories from other disciplines to logistics. International Journal of Physical Distribution & Logistics Management, 27 (9/10), 515-539.
115. Takahashi, K., Nakamura, N., and Izumi, M., 1997. Concurrent ordering in JIT production systems. International Journal of Operations & Production Management, 17 (3), 267-290.
116. Tang, O., Grubbström, R., and Zanoni, S., 2007. Planned lead time determination in a make-toorder remanufacturing system. International Journal of Production Economics, 108 (1/2), 426-435.
117. Teunter, R. and Van der Laan, E., 2002. On the non-optimality of the average cost approach for inventory models with remanufacturing. International Journal of Production Economics, 79 (1), 67-73.
118. Teunter, R.H., 2001a. Economic ordering quantities for recoverable item inventory systems. Naval Research Logistics, 48 (6), 484-495.
119. Teunter, R.H., 2001b. A reverse logistics valuation method for inventory control. International Journal of Production Research, 39 (9), 2023-2035.
120. Tibben-Lembke, R.S., 1998. The impact of reverse logistics on the total cost of ownership. Journal of Marketing Theory and Practice, 6 (4), 51-66.
121. Tibben-Lembke, R.S., 2002. Life after death: reverse logistics and the product life cycle. International Journal of Physical Distribution & Logistics, 32 (3), 223-244.
122. Tibben-Lembke, R.S. and Rogers, D.S., 2002. Special feature-reverse logistics: differences between forward and reverse logistics in a retail environment. Supply Chain Management: An International Journal, 7 (5), 271-282.
123. Toktay, L.B., Wein, L.M., and Zenios, S.A., 2000. Inventory management of remanufacturable products. Management Science, 46 (11), 1412-1426.
124. Upton, D., 1998. Just-in-time and performance measurement systems. International Journal of Operations and Management, 18 (11), 1101-1110.
125. Urban, T., 2002. The interdependence of inventory management and retail shelf management. International Journal of Physical Distribution & Logistics Management, 32 (1), 41-58.
126. Van der Laan, E., Dekker, R., and Salomon, M., 1996. Product remanufacturing and disposal: a numerical comparison of alternative control strategies. International Journal of Production Economics, 45 (1-3), 489-498.
127. Van, L.H. and Vanmaele, H., 2002. Robust planning: a new paradigm for demand chain planning. Journal of Operations Management, 20 (6), 769-783.
128. Vuppalapati, K., Ahire, S., and Gupta, T., 1995. JIT and TQM: a case for joint implementation. International Journal of Operations & Production Management, 15 (5), 84-94.
129. Wadhwa, S., Madaan, J., and Chan, F.T.S., 2009. Flexible decision modelling of reverse logistics system: a value adding MCDM approach for alternative selection. Robotics and Computer Integrated Manufacturing, 25 (2), 460-469.
130. Wafa, M. and Yasin, M., 1998. A conceptual framework for effective implementation of JIT: an empirical investigation. International Journal of Operations & Production Management, 18 (11), 1111-1124.
131. Waller, M., Williams, B., and Eroglu, C., 2008. Hidden effects of variable order review intervals in inventory control. International Journal of Physical Distribution & Logistics Management, 38 (3), 244-258.
132. Wang, S. and Sarker, B.R., 2006. Optimal models for a multi-stage supply chain system controlled by kanban under just-in-time philosophy. European Journal of Operational Research, 172 (1), 179-200.
133. Wang, W., Fung, R.Y.K., and Chain, Y., 2004. Approach of just-in-time distribution requirements planning for supply chain management. International Journal of Production Economics, 91 (2), 101-107.
134. Weng, Z.K., 1999. Concurrence, postponement and trans-shipment in a two-echelon manufacturing and distribution system. International Journal of Production Research, 37 (2), 341-357.
135. Wu, Y.C., 2003. Lean manufacturing: a perspective of lean suppliers. International Journal of Operations & Production Management, 23 (11), 1349-1376.
136. Yasin, M., Wafa, M., and Small, M., 2004. Benchmarking JIT: an analysis of JIT implementations in the manufacturing service and public sectors. Benchmarking: An international Journal, 11 (1), 74-92.
137. Yu, Z., Yan, H., and Cheng, T.C.E., 2001. Benefits of information sharing with supply chain partnerships. Industrial Management & Data System, 101 (3), 114-119.