A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions

Journal of Physics D: Applied Physics

Volumn 46, Issue 40, 2013, Pages

  Sharifi, S ^a   Stack, M M ^a  

^a UNIVERSITY OF STRATHCLYDE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

DENTAL RESTORATIVE MATERIALS; MICROABRASION; PARTICLE ENTRAINMENT; TRIBOLOGICAL BEHAVIOUR; VISCOUS SOLUTION; WEAR RATES;

ABRASION; DENTAL MATERIALS; VISCOSITY; YTTRIUM ALLOYS;

TRIBOLOGY;

EID: 84884689249     PISSN: 00223727     EISSN: 13616463     Source Type: Journal    
DOI: 10.1088/0022-3727/46/40/404008     Document Type: Article

References (55)

1. Smit H J, Grady M L, Finnegan Y E, Hughes S-A C, Cotton J R and Rogers P J 2006 Role of familiarity on effects of caffeine- and glucose-containing soft drinks Physiol. Behavior 87 287-97 (Pubitemid 43188825)
2. Tahmassebi J F, Duggal M S, Malik-Kotru G and Curzon M E J 2006 Soft drinks and dental health: a review of the current literature J. Dentistry 34 2-11 (Pubitemid 41785708)
3. Höland W et al 2009 Future perspectives of biomaterials for dental restoration J. Eur. Ceram. Soc. 29 1291-7
4. Wang L, Liu Y, Si W, Feng H, Tao Y and Ma Z 2012 Friction and wear behaviors of dental ceramics against natural tooth enamel J. Eur. Ceram. Soc. 32 2599-606
5. Preis V, Behr M, Kolbeck C, Hahnel S, Handel G and Rosentritt M 2011 Wear performance of substructure ceramics and veneering porcelains Dental Mater.: Official Publ. Acad. Dental Mater. 27 796-804
6. Lawson S 1995 Environmental degradation of zirconia ceramics J. Eur. Ceram. Soc. 15 485-502
7. Chevalier J, Deville S, Münch E, Jullian R and Lair F 2004 Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis Biomaterials 25 5539-45 (Pubitemid 38610193)
8. Chevalier J 2006 What future for zirconia as a biomaterial? Biomaterials 27 535-43 (Pubitemid 41464249)
9. Manicone P F, Rossi Iommetti P and Raffaelli L 2007 An overview of zirconia ceramics: basic properties and clinical applications J. Dentistry 35 819-26
10. Denry I and Kelly J R 2008 State of the art of zirconia for dental applications Dental Mater.: Official Publ. Acad. Dental Mater. 24 299-307
11. Lorenzo-Martin C et al 2002 Mechanical behaviour of yttria tetragonal zirconia polycrystalline nanoceramics: dependence on the glassy phase content J. Eur. Ceram. Soc. 22 2603-7
12. Medevielle A, Thevenot F and Treheux D 1997 Wear resistance of zirconias. Dielectrical approach Wear 213 13-20 (Pubitemid 127406070)
13. Vale Antunes P and Ramalho A 2003 Study of abrasive resistance of composites for dental restoration by ball-cratering Wear 255 990-8 (Pubitemid 36990825)
14. Sharifi S, Stack M M, Stephen L, Li W-L and Wang M-C 2013 Micro-abrasion of Y-TZP in tea Wear 297 713-21
15. Sobolik V, Zitny R, Tovcigrecko V, Delgado M and Allaf K 2002 Viscosity and electrical conductivity of concentrated solutions of soluble coffee J. Food Eng. 51 93-8 (Pubitemid 33094057)
16. Guler A U, Yilmaz F, Kulunk T, Guler E and Kurt S 2005 Effects of different drinks on stainability of resin composite provisional restorative materials J. Prosthet. Dentistry 94 118-24 (Pubitemid 41020806)
17. Lambrechts P, Debels E, Van Landuyt K, Peumans M and Van Meerbeek B 2006 How to simulate wear? Overview of existing methods Dental Mater. 22 693-701
18. Williams J A and Hyncica A M 1992 Mechanisms of abrasive wear in lubricated contacts Wear 152 57-74
19. da Silva W M and de Mello J D B 2009 Using parallel scratches to simulate abrasive wear Wear 267 1987-997
20. Fleming G J, Jandu H S, Nolan L and Shaini F 2004 The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material J. Dentistry 32 67-74 (Pubitemid 37491401)
21. Ferruzzi M G 2010 The influence of beverage composition on delivery of phenolic compounds from coffee and tea Physiol. Behavior 100 33-41
22. Gant a J and Gee M G 2011 A review of micro-scale abrasion testing J. Phys. D: Appl. Phys. 44 073001
23. Jalabert-Malbos M-L, Mishellany-Dutour A, Woda A and Peyron M-A 2007 Particle size distribution in the food bolus after mastication of natural foods Food Qual. Preference 18 803-12 (Pubitemid 46508678)
24. Shiozawa K 2011 Effects of addition of water on masticatory behavior and the mechanical properties of the food bolus J. Oral Biosci. 53 148-57
25. Mioche L, Bourdiol P, Monier S, Martin J-F and Cormier D 2004 Changes in jaw muscles activity with age: effects on food bolus properties Physiol. Behavior 82 621-7 (Pubitemid 39141076)
26. Mishellany-Dutour A et al 2011 Comparison of food boluses prepared in vivo and by the AM2 mastication simulator Food Qual. Preference 22 326-31
27. Lewis R and Dwyer-Joyce R S 2005 Wear of human teeth: a tribological perspective J. Eng. Tribol. 219 1-18 (Pubitemid 40390291)
28. He L 2008 Mechanical behaviour of human enamel and the relationship to its structural and compositional characteristics PhD Thesis University of Sydney
29. Chen J, Khandelwal N, Liu Z and Funami T 2013 Influences of food hardness on the particle size distribution of food boluses Arch. Oral Biol. 58 293-8
30. Kim D-W and Kim K-W 2013 Effects of sliding velocity and normal load on friction and wear characteristics of multi-layered diamond-like carbon (DLC) coating prepared by reactive sputtering Wear 297 722-30
31. Prasad B K, Das S, Jha A K, Modi O P, Dasgupta R and Yegneswaran A H 1997 Factors controlling the abrasive wear response of a zinc-based alloy silicon carbide particle composite Composites A 28 301-8 (Pubitemid 127412137)
32. Zhou Z R and Zheng J 2008 Tribology of dental materials: a review J. Phys. D: Appl. Phys. 41 113001 (Pubitemid 351766686)
33. Sajewicz E and Kulesza Z 2007 A new tribometer for friction and wear studies of dental materials and hard tooth tissues Tribol. Int. 40 885-95 (Pubitemid 44879749)
34. Marcus K and Allen C 1994 The sliding wear of ultrahigh molecular weight polyethylene in an aqueous environment Wear 178 17-28 (Pubitemid 287787)
35. Wannasri S, Panin S V, Ivanova L R, Kornienko L A and Piriyayon S 2009 Increasing wear resistance of UHMWPE by mechanical activation and chemical modification combined with addition of nanofibers Proc. Eng. 1 67-70
36. Heintze S D, Zellweger G, Grunert I, Muñoz-Viveros C A and Hagenbuch K 2012 Laboratory methods for evaluating the wear of denture teeth and their correlation with clinical results Dental Mater.: Official Publ. Acad. Dental Mater. 28 261-72
37. Trezona R I and Hutchings I M 1999 Three-body abrasive wear testing of soft materials Wear 233-235 209-21 (Pubitemid 30087019)
38. Stack M and Mathew M 2003 Micro-abrasion transitions of metallic materials Wear 255 14-22 (Pubitemid 36964961)
39. Baqain Z H, Moqbel W Y and Sawair F A 2012 Early dental implant failure: risk factors Brit. J. Oral Maxillofacial Surg. 50 239-43
40. Ferrazzano G F, Amato I, Ingenito A, De Natale A and Pollio A 2009 Anti-cariogenic effects of polyphenols from plant stimulant beverages (cocoa, coffee, tea) Fitoterapia 80 255-62
41. Sharangi A B 2009 Medicinal and therapeutic potentialities of tea (Camellia sinensis L.) - a review Food Res. Int. 42 529-35
42. Kalin M, Novak S and Vižintin J 2003 Wear and friction behavior of alumina ceramics in aqueous solutions with different pH Wear 254 1141-6 (Pubitemid 37054059)
43. Shabanian M and Richards L C 2002 In vitro wear rates of materials under different loads and varying pH J. Prosthet. Dentistry 87 650-6 (Pubitemid 40433927)
44. Gee M G et al 2003 Progress towards standardisation of ball cratering Wear 255 1-13 (Pubitemid 36967422)
45. Stachowiak G B, Stachowiak G W and Brandt J M 2006 Ball-cratering abrasion tests with large abrasive particles Tribol. Int. 39 1-11 (Pubitemid 41613661)
46. Stack M M, Huang W, Wang G and Hodge C 2011 Some views on the construction of bio-tribo-corrosion maps for titanium alloys in Hank's solution: particle concentration and applied loads effects Tribol. Int. 44 1827-37
47. Ren J S et al 2010 Tea, coffee, carbonated soft drinks and upper gastrointestinal tract cancer risk in a large United States prospective cohort study Eur. J. Cancer (Oxford, England, 1990) 46 1873-81
48. Zheng J and Zhou Z R 2007 Friction and wear behavior of human teeth under various wear conditions Tribol. Int. 40 278-84 (Pubitemid 44415261)
49. Wang H-C, Stack M M, Li W-L, Hong T-F and Wang M-C 2010 On the construction of wear maps for Y-TZP dental ceramics in aqueous environments: pH, exposure time and impact angle effects Tribol. Int. 43 2258-67
50. Stack M M, Jawan H and Mathew M T 2005 On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments Tribol. Int. 38 848-56 (Pubitemid 41114497)
51. Hodge C and Stack M M 2010 Tribo-corrosion mechanisms of stainless steel in soft drinks Wear 270 104-14
52. Papanagiotou H P, Morgano S M, Giordano R A and Pober R 2006 In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics J. Prosthet. Dentistry 96 154-64 (Pubitemid 44380257)
53. Hallmann L, Ulmer P, Reusser E, Louvel M and Hämmerle C H F 2012 Effect of dopants and sintering temperature on microstructure and low temperature degradation of dental Y-TZP-zirconia J. Eur. Ceram. Soc. 32 4091-104
54. Sabrah A H, Cook N B, Luangruangrong P, Hara A T and Bottino M C 2013 Full-contour Y-TZP ceramic surface roughness effect on synthetic hydroxyapatite wear Dental Mater.: Official Publ. Acad. Dental Mater. 29 666-73
55. Preis V, Behr M, Handel G, Schneider-Feyrer S, Hahnel S and Rosentritt M 2012 Wear performance of dental ceramics after grinding and polishing treatments J. Mech. Behavior Biomed. Mater. 10 13-22