In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics

Journal of Prosthetic Dentistry

Volumn 96, Issue 3, 2006, Pages 154-164

  Papanagiotou, Harry P ^a   Morgano, Steven M ^b   Giordano, Russell A ^a   Pober, Richard ^c  

^a Division of Biomaterials

^b Division of Postdoctoral Prosthodontics   (United States)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

YTTRIA STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIUM;

ARTICLE; CHEMISTRY; DENTAL CARE; MATERIALS TESTING; PLIABILITY; SPECTROMETRY; SURFACE PROPERTY; SURVIVAL; TEMPERATURE; TOOTH BRUSHING; TOOTH PROSTHESIS; X RAY CRYSTALLOGRAPHY;

CRYSTALLOGRAPHY, X-RAY; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; MATERIALS TESTING; PLIABILITY; SPECTROMETRY, X-RAY EMISSION; SURFACE PROPERTIES; SURVIVAL ANALYSIS; TEMPERATURE; YTTRIUM;

EID: 33748596081     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2006.08.004     Document Type: Article

References (41)

1. Webber B., McDonald A., and Knowles J. An in vitro study of the compressive load at fracture of Procera AllCeram crowns with varying thickness of veneer porcelain. J Prosthet Dent 89 (2003) 154-160
2. Tinschert J., Natt G., Mautsch W., Augthum M., and Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 14 (2001) 231-238
3. Probster L., and Diehl J. Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int 23 (1992) 25-31
4. Piconi C., Burger W., Richter G.H., Cittadini A., Maccauro G., Covacci V., et al. Y-TZP ceramics for artificial joint replacements. Biomaterials 19 (1998) 1489-1494
5. Lawn B.R., Deng Y., and Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent 86 (2001) 495-510
6. Yoshinari M., and Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont 7 (1994) 329-338
7. Vult von Steyern P., Jonsson O., and Nilner K. Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs. Int J Prosthodont 14 (2001) 379-384
8. Suarez M.J., Lozano J.F.L., Paz Salido M.P., and Martinez F. Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs. Int J Prosthodont 17 (2004) 35-38
9. Seghi R.R., and Sorensen J.A. Relative flexural strength of six new ceramic materials. Int J Prosthodont 8 (1995) 239-246
10. Kern M., Knode H., and Strubb J.R. The all-porcelain, resin-bonded bridge. Quintessence Int 22 (1991) 257-262
11. McLaren E.A., and White S.N. Survival of In-Ceram crowns in a private practice: a prospective clinical trial. J Prosthet Dent 83 (2000) 216-222
12. Piconi C., and Maccauro G. Zirconia as a ceramic material. Biomaterials 20 (1999) 1-25
13. Giordano R. A comparison of all-ceramic restorative systems: part 2. Gen Dent 48 (2000) 38-40 43-5
14. Guazzato M., Albakry M., Swain M.V., and Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. Int J Prosthodont 15 (2002) 339-346
15. Pallis K., Griggs J.A., Woody R.D., Guillen G.E., and Miller A.W. Fracture resistance of three all-ceramic restorative systems for posterior applications. J Prosthet Dent 91 (2004) 561-569
16. Clarke I.C., Manaka M., Green D.D., Williams P., Pezzotti G., Kim Y.H., et al. Current status of zirconia used in total hip implants. J Bone Joint Surg Am 85 (2003) 73-84
17. Guo X. On the degradation of zirconia ceramics during low-temperature annealing in water or water vapor. J Physics Chem Solids 60 (1999) 539-546
18. Lilley E. Review of low temperature degradation in Y-TZPs. In: Tressler R.E., and McNallan M. (Eds). Ceramic transaction: corrosion and corrosive degradation of ceramics (1990), American Ceramics Society, Westerville 387-407
19. Chevalier J., Cales B., and Drouin J.M. Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc 82 (1999) 2150-2204
20. 2 polycrystals of various grain sizes during low-temperature aging in water. J Am Ceram Soc 81 (1998) 2687-2778
21. Lawson S. Environmental degradation of zirconia ceramics. J Eur Ceram Soc 15 (1995) 485-502
22. Boulc'h F., Dessemond L., and Djurado E. Delay of tetragonal-to-monoclinic transition in water vapour due to nanostructural effect. J Eur Ceram Soc 24 (2004) 1181-1185
23. Deville S., Chevalier J., Fantozzi G., Bartolome J.F., Requena J., Moya J.S., et al. Low-temperature ageing of zirconia-toughened alumina ceramics and its implication in biomedical implants. J Eur Ceram Soc 23 (2003) 2975-2982
24. Guo X., and He J. Hydrothermal degradation of cubic zirconia. Acta Mater 51 (2003) 5123-5130
25. Christel P., Meunier A., Heller M., Torre J.P., and Peille C.N. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 23 (1989) 45-61
26. Luthardt R.G., Holzhuter M.S., Rudolph H., Herold V., and Walter M.H. CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater 20 (2004) 655-662
27. Cales B. Zirconia as a sliding material. Histologic, laboratory, and clinical data. Clin Orthop Relat Res 379 (2000) 94-112
28. Apholt W., Bindl A., Luthy H., and Mormann W.H. Flexural strength of Cerec 2 machined and jointed InCeram-Alumina and InCeram-Zirconia bars. Dent Mater 17 (2001) 260-267
29. Haraguchi K., Sugano N., Nishii T., Miki H., Oka K., and Yoshikawa H. Phase transformation of a zirconia ceramic head after total hip arthroplasty. J Bone Joint Surg Br 83 (2001) 996-1000
30. Ardlin B.I. Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 18 (2002) 590-595
31. Shimizu K., Oka M., Kumar P., Kotoura Y., Yamamuro T., Makinouchi K., et al. Time-dependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 27 (1993) 729-734
32. Kosmac T., Oblak C., Jevnikar P., Funduk N., and Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. J Biomed Mater Res 53 (2000) 304-313
33. Guazzato M., Quach L., Albakry M., and Swain M.V. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 33 (2005) 9-18
34. Tinschert J., Zwez D., Marx R., and Anusavice K.J. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 28 (2000) 529-535
35. 3 nanocomposite and conventional Y-TZP. J Biomed Mater Res A 67 (2003) 200-207
36. Cales B., Stefani Y., and Lilley E. Long-term in vivo and in vitro aging of a zirconia ceramic used in orthopaedy. J Biomed Mater Res 28 (1994) 619-624
37. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
38. Alkhiary Y.M., Morgano S.M., and Giordano R.A. Effects of acid hydrolysis and mechanical polishing on surface residual stresses of low-fusing dental ceramics. J Prosthet Dent 90 (2003) 133-142
39. Roebben G., Basu B., Vleugels J., and Van der Biest O. Transformation-induced damping behaviour of Y-TZP zirconia ceramics. J Eur Ceram Soc 23 (2003) 481-489
40. Gruber A.D., Widenhouse C.W., Mathes S., and Gruber R.P. Exhaustive Soxhlet extraction for the complete removal of residual compounds to provide a nonleaching silicane elastomer. J Biomed Mater Res 53 (2000) 445-448
41. Oblak C., Jevnikar P., Kosmac T., Funduk N., and Marion L. Fracture resistance and reliability of new zirconia posts. J Prosthet Dent 91 (2004) 342-348