A control oriented model with variable valve timing for HCCI combustion timing control

SAE Technical Papers

Volumn 2, Issue , 2013, Pages

  Ebrahimi, Khashayar ^a   Koch, Charles ^a   Schramm, Alex ^a  

^a UNIVERSITY OF ALBERTA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION RATIO (MACHINERY); INTERNAL COMBUSTION ENGINES; REACTION KINETICS; TIMING CIRCUITS;

CONTROL ORIENTED MODELS; DETAILED CHEMICAL KINETIC; HOMOGENEOUS CHARGE COMPRESSION IGNITION; MODEL BASED CONTROLS; PHYSICS-BASED MODELING; REDUCED ORDER MODELS; START OF COMBUSTION; VARIABLE VALVE TIMING;

IGNITION;

EID: 84881207022     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2013-01-0588     Document Type: Conference Paper

References (58)

1. Zhao H.,. HCCI and CAI engines for the automotive industry. CRC Press, 2006.
2. Najt, P. and Foster, D., Compression-Ignited Homogeneous Charge Combustion, SAE Technical Paper 830264, 1983, doi: 10.4271/830264.
3. Atkins M. J. and Koch C. R.,. The effect of fuel octane and diluent on HCCI combustion. Proc. IMechE, Part D, 219: 665-675, 2005.
4. Kirchen P. N., Shahbahkti M., and Koch C. R.,. A skeletal kinetic mechanism for PRF combustion in HCCI engines. Combustion Science and Technology, 179: 1059-1083, 2007.
5. Christensen, M. and Johansson, B., Influence of Mixture Quality on Homogeneous Charge Compression Ignition, SAE Technical Paper 982454, 1998, doi: 10.4271/982454.
6. Martinez-Frias, J., Aceves, S., Flowers, D., Smith, J., et al., Equivalence Ratio-EGR Control of HCCI Engine Operation and the Potential for Transition to Spark-Ignited Operation, SAE Technical Paper 2001-01-3613, 2001, doi: 10.4271/2001-01-3613.
7. Olsson, J., Tunestål, P., and Johansson, B., Closed-Loop Control of an HCCI Engine, SAE Technical Paper 2001-01-1031, 2001, doi: 10.4271/2001-01-1031.
8. Olsson, J., Tunestål, P., Ulfvik, J., and Johansson, B., The Effect of Cooled EGR on Emissions and Performance of a Turbocharged HCCI Engine, SAE Technical Paper 2003-01-0743, 2003, doi: 10.4271/2003-01-0743.
9. Zhao, H., Peng, Z., Williams, J., and Ladommatos, N., Understanding the Effects of Recycled Burnt Gases on the Controlled Autoignition (CAI) Combustion in Four-Stroke Gasoline Engines, SAE Technical Paper 2001-01-3607, 2001, doi: 10.4271/2001-01-3607.
10. Koopmans, L. and Denbratt, I., A Four Stroke Camless Engine, Operated in Homogeneous Charge Compression Ignition Mode with Commercial Gasoline, SAE Technical Paper 2001-01-3610, 2001, doi: 10.4271/2001-01-3610.
11. Law, D., Kemp, D., Allen, J., Kirkpatrick, G., et al., Controlled Combustion in an IC-Engine with a Fully Variable Valve Train, SAE Technical Paper 2001-01-0251, 2001, doi: 10.4271/2001-01-0251.
12. Li, J., Zhao, H., Ladommatos, N., and Ma, T., Research and Development of Controlled Auto-Ignition (CAI) Combustion in a 4-Stroke Multi-Cylinder Gasoline Engine, SAE Technical Paper 2001-01-3608, 2001, doi: 10.4271/2001-01-3608.
13. Christensen, M., Hultqvist, A., and Johansson, B., Demonstrating the Multi Fuel Capability of a Homogeneous Charge Compression Ignition Engine with Variable Compression Ratio, SAE Technical Paper 1999-01-3679, 1999, doi: 10.4271/1999-01-3679.
14. Ryan, T., Callahan, T., and Mehta, D., HCCI in a Variable Compression Ratio Engine-Effects of Engine Variables, SAE Technical Paper 2004-01-1971, 2004, doi: 10.4271/2004-01-1971.
15. Strandh, P., Bengtsson, J., Johansson, R., Tunestål, P., et al., Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine, SAE Technical Paper 2004-01-0941, 2004, doi: 10.4271/2004-01-0941.
16. Audet, A. and Koch, C., Actuator Comparison for Closed Loop Control of HCCIC Combustion Timing, SAE Technical Paper 2009-01-1135, 2009, doi: 10.4271/2009-01-1135.
17. Ghazimirsaied A. and Koch C. R.,. Controlling cyclic combustion timing variations using a symbol-statistics predictive approach in an HCCI engine. Applied Energy, 92 (0): 133-146, 2012.
18. Urushihara, T., Hiraya, K., Kakuhou, A., and Itoh, T., Expansion of HCCI Operating Region by the Combination of Direct Fuel Injection, Negative Valve Overlap and Internal Fuel Reformation, SAE Technical Paper 2003-01-0749, 2003, doi: 10.4271/2003-01-0749.
19. Jang, J., Yang, K., Yeom, K., Bae, C., et al., Improvement of DME HCCI Engine Performance by Fuel Injection Strategies and EGR, SAE Int. J. Fuels Lubr. 1 (1): 1075-1083, 2009, doi: 10.4271/2008-01-1659.
20. Christensen, M. and Johansson, B., Homogeneous Charge Compression Ignition with Water Injection, SAE Technical Paper 1999-01-0182, 1999, doi: 10.4271/1999-01-0182.
21. Iwashiro, Y., Tsurushima, T., Nishijima, Y., Asaumi, Y., et al., Fuel Consumption Improvement and Operation Range Expansion in HCCI by Direct Water Injection, SAE Technical Paper 2002-01-0105, 2002, doi: 10.4271/2002-01-0105.
22. Milovanovic, N., Chen, R., and Turner, J., Influence of the Variable Valve Timing Strategy on the Control of a Homogeneous Charge Compression (HCCI) Engine, SAE Technical Paper 2004-01-1899, 2004, doi: 10.4271/2004-01-1899.
23. Bidarvatan, M., Shahbakhti, M., and Jazayeri, S., Model-Based Control of Combustion Phasing in an HCCI Engine, SAE Int. J. Engines 5 (3): 1163-1176, 2012, doi: 10.4271/2012-01-1137.
24. Millet, J., Maroteaux, F., Emery, P., and Sorine, M., A Reduced Model of HCCI Combustion in View of Application to Model Based Engine Control Systems, SAE Technical Paper 2006-01-3297, 2006, doi: 10.4271/2006-01-3297.
25. Blom, D., Karlsson, M., Ekholm, K., Tunestål, P., et al., HCCI Engine Modeling and Control using Conservation Principles, SAE Technical Paper 2008-01-0789, 2008, doi: 10.4271/2008-01-0789.
26. Zhou, N., Xie, H., Li, N., Chen, T., et al., Study on Layered Close Loop Control of 4-Stroke Gasoline HCCI Engine Equipped with 4VVAS, SAE Technical Paper 2008-01-0791, 2008, doi: 10.4271/2008-01-0791.
27. Kongsereeparp P.,. Chemical kinetic based simulation for an HCCI engine and its combustion. PhD thesis, University of Alberta, 2008.
28. Felsch, C., Sloane, T., Han, J., Barths, H., et al., Numerical Investigation of Recompression and Fuel Reforming in a SIDI-HCCI Engine, SAE Technical Paper 2007-01-1878, 2007, doi: 10.4271/2007-01-1878.
29. Szybist, J., McFarlane, J., and Bunting, B., Comparison of Simulated and Experimental Combustion of Biodiesel Blends in a Single Cylinder Diesel HCCI Engine, SAE Technical Paper 2007-01-4010, 2007, doi: 10.4271/2007-01-4010.
30. Fiveland, S. and Assanis, D., Development and Validation of a Quasi-Dimensional Model for HCCI Engine Performance and Emissions Studies Under Turbocharged Conditions, SAE Technical Paper 2002-01-1757, 2002, doi: 10.4271/2002-01-1757.
31. Jia, M., Xie, M., and Peng, Z., A Comparative Study of Multi-zone Combustion Models for HCCI Engines, SAE Technical Paper 2008-01-0064, 2008, doi: 10.4271/2008-01-0064.
32. Babajimopoulos, A., Lavoie, G., and Assanis, D., Modeling HCCI Combustion With High Levels of Residual Gas Fraction-A Comparison of Two VVA Strategies, SAE Technical Paper 2003-01-3220, 2003, doi: 10.4271/2003-01-3220.
33. Fitzgerald, R., Steeper, R., Snyder, J., Hanson, R., et al., Determination of Cycle Temperatures and Residual Gas Fraction for HCCI Negative Valve Overlap Operation, SAE Int. J. Engines 3 (1): 124-141, 2010, doi: 10.4271/2010-01-0343.
34. Bastawissi, H., Yu-Sheng, Z., Elkelawy, M., and Bastawissi, A., Detailed 3D-CFD/Chemistry of CNG-Hydrogen Blend in HCCI Engine, SAE Technical Paper 2010-01-0165, 2010, doi: 10.4271/2010-01-0165.
35. Li, G., Bo, T., Chen, C., and Johns, R., CFD Simulation of HCCI Combustion in a 2-Stroke DI Gasoline Engine, SAE Technical Paper 2003-01-1855, 2003, doi: 10.4271/2003-01-1855.
36. Ohyama, Y., Air/Fuel Ratio and Residual Gas Fraction Control Using Physical Models for Engines with Widely Variable Valve Timing, SAE Technical Paper 2002-01-2174, 2002, doi: 10.4271/2002-01-2174.
37. Shaver G. M., Gerdes J. C., Roelle M. J., Catton P. A., and Christopher F. E.,. Dynamic modeling of residual-affected homogeneous charge compression ignition engines with variable valve actuation. Journal of Dynamics System, Measurement, and Control, 127: 374-381, 2005.
38. Ogink, R. and Golovitchev, V., Gasoline HCCI Modeling: Computer Program Combining Detailed Chemistry and Gas Exchange Processes, SAE Technical Paper 2001-01-3614, 2001, doi: 10.4271/2001-01-3614.
39. Rausen D. J., Stefanopoulou A. G., Kang J.M., Eng J. A., and Kuo T. W.,. A mean-value model for control of homogeneous charge compression ignition (HCCI) engines. Journal of Dynamics System, Measurement, and Control, 127: 355-362, 2005.
40. http://www.sandia.gov/chemkin/docs/SENKINabs.html.
41. https://www.avl.com/web/ast/boost.
42. Karagiorgis S., Collings N., Glover K., and Petridis T.,. Dynamic modeling of combustion and gas exchange processes for controlled auto-ignition engines. Proceedinds of the 2006 American Control Conference, pages 1880-1885, 2006.
43. Shahbakhti, M. and Koch, C., Dynamic Modeling of HCCI Combustion Timing in Transient Fueling Operation, SAE Int. J. Engines 2 (1): 1098-1113, 2009, doi: 10.4271/2009-01-1136.
44. http://www.erc.wisc.edu/chemicalreaction.php.
45. https://www-pls.llnl.gov.
46. Assanis D. N.,. Turbocharged Turbocompounded diesel engine system for studies of low heat rejection engine performance. PhD thesis, Massachusetts Institue of Technology, 1985.
47. ++ User's Guide. California Institute of Technology, 2002.
48. Souder J.S.,. Closed-Loop Control of a Multi-Cylinder HCCI Engine. PhD thesis, University of California, Berkeley, 2004.
49. Guzzella L.,. Introduction to modeling and control of internal combustion engine systems. Springer, 2004.
50. Bettis J. B.,. Thermodynamic based modelling for nonlinear control of combustion phasing in HCCI engines. Master's thesis, Missouri University of Science and Technology, 2010.
51. Kocher L., Koeberlein E., Alstine D. G. Van, Stricker K., and Shaver G.,. Physically based volumetric efficiency model for diesel engines utilizing variable intake valve actuation. International Journal of Engine Research, 13: 169-184, 2012.
52. Chiang C.J. and Stefanopoulou A.G.,. Sensitivity analysis of combustion timing and duration of homogeneous charge compression ignition (HCCI) engines. In American Control Conference, 2006, page 6 pp., June 2006.
53. Warnatz J., Maas U., and Dibble Robert. W.,. Combustion: physical and chemical fundamentals, modeling and simulation, experiments, pollutant formation. Springer Press, 2006.
54. Seethaler, R., Koch, C., Chladny, R., and Mashkournia, M., Closed Loop Electromagnetic Valve Actuation Motion Control on a Single Cylinder Engine, SAE Technical Paper 2013-01-0594, 2013, doi: 10.4271/2013-01-0594.
55. Ebrahimi K. and Koch C. R.,. HCCI combustion timing control with variable valve timing. Submitted for the American Control Conference, 2013.
56. Babajimopoulos, A., Assanis, D., and Fiveland, S., An Approach for Modeling the Effects of Gas Exchange Processes on HCCI Combustion and Its Application in Evaluating Variable Valve Timing Control Strategies, SAE Technical Paper 2002-01-2829, 2002, doi: 10.4271/2002-01-2829.
57. Guohong, T., Zhi, W., Jianxin, W., Shijin, S., et al., HCCI Combustion Control by Injection Strategy with Negative Valve Overlap in a GDI Engine, SAE Technical Paper 2006-01-0415, 2006, doi: 10.4271/2006-01-0415.
58. Johansson, T., Johansson, B., Tunestål, P., and Aulin, H., HCCI Operating Range in a Turbo-charged Multi Cylinder Engine with VVT and Spray-Guided DI, SAE Technical Paper 2009-01-0494, 2009, doi: 10.4271/2009-01-0494.