Particle size and number emissions from rcci with direct injections of two fuels

SAE Technical Papers

Volumn 2, Issue , 2013, Pages

  Kolodziej, Christopher ^a   Wissink, Martin ^b   Splitter, Derek ^b   Hanson, Reed ^b   Reitz, Rolf ^b   Benajes, Jesus ^c  

^a ARGONNE NATIONAL LABORATORY   (United States)

^b University of Wisconsin   (United States)

^c UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

BLENDING; COMBUSTION CHAMBERS; DIESEL FUELS; DUAL FUEL ENGINES; ECONOMIC AND SOCIAL EFFECTS; GASOLINE; IGNITION; NITROGEN OXIDES; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; SIZE DISTRIBUTION;

COMBUSTION EFFICIENCIES; COMPRESSION IGNITION; ENGINE OPERATING CONDITIONS; IN-CYLINDER INJECTION; PORT FUEL INJECTIONS; PRIMARY DILUTION RATIOS; REACTIVITY CONTROL; STABLE MEASUREMENTS;

DIRECT INJECTION;

EID: 84881195495     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2013-01-1661     Document Type: Conference Paper

References (46)

1. Kalghatgi, G., Risberg, P., and Ångström, H., Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel, SAE Technical Paper 2007-01-0006, 2007, doi: 10.4271/2007-01-0006.
2. Dec, J., Yang, Y., and Dronniou, N., Boosted HCCI-Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline, SAE Int. J. Engines 4 (1): 1169-1189, 2011, doi: 10.4271/2011-01-0897.
3. Kokjohn, S. L., Hanson, R. M., Splitter, D. A., Reitz, R. D., Fuel Reactivity Controlled Compression Ignition (RCCI): A Pathway to Controlled High-Efficiency Clean Combustion, Int. J. Engine Res. 12 (3): 209-226, 2011.
4. Foster, D. E., Low Temperature Combustion- A Thermodynamic Pathway to High Efficiency Engines, National Petroleum Council Fuels Study, prepared March 2012.
5. Lavoie, G. A. E., Ortiz-Soto, Babajimopoulos, A., Martz, J. B., Assanis, D.N., Thermodynamic sweet spot under highly dilute and boosted gasoline engine conditions, Int. J. Engine Res. August 16, 2012, doi: 10.1177/1468087412455372.
6. Kittelson, D. B., Engines and Nanoparticles: A Review, J. Aerosol Sci 29 (5/6): 575-588, 1998.
7. Montajir, R., Kawai, T., Goto, Y., and Odaka, M., Thermal Conditioning of Exhaust Gas: Potential for Stabilizing Diesel Nano-Particles, SAE Technical Paper 2005-01-0187, 2005, doi: 10.4271/2005-01-0187.
8. Benajes, J., Novella, R., Arthozoul, S., and Kolodziej, C., Particle Size Distribution Measurements from Early to Late Injection Timing Low Temperature Combustion in a Heavy Duty Diesel Engine, SAE Int. J. Fuels Lubr. 3 (1): 567-581, 2010, doi: 10.4271/2010-01-1121.
9. Tran, H., Investigation of Fuel Property and Biodiesel Effects in a Highly Dilute Low Temperature Combustion Regime with a Light-Duty Diesel Engine, Master of Science Thesis, University of Wisconsin-Madison, 2010.
10. Benajes, J., Novella, R., Arthozoul, S., Kolodziej, C., Injection Timing Effects on Premixed Low Temperature Combustion Particle Emissions from Light and Heavy Duty Diesel Engines, 14th ETH-Conference on Combustion Generated Nanoparticles, ETH-Zurich, Switzerland, August 1-4, 2010.
11. Kolodziej, C., Particulate Matter Emissions from Premixed Diesel Low Temperature Combustion, PhD Thesis, Universitat Politècnica de València, 2012.
12. Kanda, T., Hakozaki, T., Uchimoto, T., Hatano, J., et al., PCCI Operation with Early Injection of Conventional Diesel Fuel, SAE Technical Paper 2005-01-0378, 2005, doi: 10.4271/2005-01-0378.
13. Kanda, T., Hakozaki, T., Uchimoto, T., Hatano, J., et al., PCCI Operation with Fuel Injection Timing Set Close to TDC, SAE Technical Paper 2006-01-0920, 2006, doi: 10.4271/2006-01-0920.
14. Kashdan, J., Mendez, S., and Bruneaux, G., On the Origin of Unburned Hydrocarbon Emissions in a Wall Guided, Low NOx Diesel Combustion System, SAE Technical Paper 2007-01-1836, 2007, doi: 10.4271/2007-01-1836.
15. Fang, T., Coverdill, R., Lee, C., and White, R., Smokeless Combustion within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector, SAE Technical Paper 2007-01-0203, 2007, doi: 10.4271/2007-01-0203.
16. Fang, T., Coverdill, R. E., Lee, C. F., White, R. A., Effects of Injection Angles on Combustion Processes using Multiple Injection Strategies in an HSDI Diesel Engine, Fuel 87: 3232-3239, 2008.
17. Martin, G., Mueller, C., Milam, D., Radovanovic, M., et al., Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-Included-Angle Nozzle, SAE Int. J. Engines 1 (1): 1057-1082, 2009, doi: 10.4271/2008-01-2400.
18. Benajes, J., García-Oliver, J. M., Novella, R., Kolodziej, C., Increased Particle Emissions from Early Fuel Injection Timing Diesel Low Temperature Combustion, Fuel 94: 184-190, 2012.
19. Payri, F., Benajes, J., Novella, R., and Kolodziej, C., Effect of Intake Oxygen Concentration on Particle Size Distribution Measurements from Diesel Low Temperature Combustion, SAE Int. J. Engines 4 (1): 1888-1902, 2011, doi: 10.4271/2011-01-1355.
20. Raatz, T. and Mueller, E., Examination of Particle Size Distribution of Homogeneous and Conventional Diesel Combustion, SAE Technical Paper 2001-01-3576, 2001, doi: 10.4271/2001-01-3576.
21. Akihama, K., Takatori, Y., Inagaki, K., Sasaki, S., et al., Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature, SAE Technical Paper 2001-01-0655, 2001, doi: 10.4271/2001-01-0655.
22. Sluder, C., Wagner, R., Lewis, S., and Storey, J., Exhaust Chemistry of Low-NOX, Low-PM Diesel Combustion, SAE Technical Paper 2004-01-0114, 2004, doi: 10.4271/2004-01-0114.
23. Ogawa, H., Miyamoto, N., Shimizu, H., and Kido, S., Characteristics of Diesel Combustion in Low Oxygen Mixtures with Ultra-High EGR, SAE Technical Paper 2006-01-1147, 2006, doi: 10.4271/2006-01-1147.
24. Kolodziej, C., Wirojsakunchai, E., Foster, D., Schmidt, N., et al., Comprehensive Characterization of Particulate Emissions from Advanced Diesel Combustion, SAE Technical Paper 2007-01-1945, 2007, doi: 10.4271/2007-01-1945.
25. Northrop, W., Assanis, D., and Bohac, S., Evaluation of Diesel Oxidation Catalyst Conversion of Hydrocarbons and Particulate Matter from Premixed Low Temperature Combustion of Biodiesel, SAE Int. J. Engines 4 (1): 1431-1444, 2011, doi: 10.4271/2011-01-1186.
26. Prikhodko, V., Curran, S., Barone, T., Lewis, S., et al., Emission Characteristics of a Diesel Engine Operating with In-Cylinder Gasoline and Diesel Fuel Blending, SAE Int. J. Fuels Lubr. 3 (2): 946-955, 2010, doi: 10.4271/2010-01-2266.
27. Prikhodko, V. Y., Curran, S. J., Barone, T. L., Lewis, S. A., Storey, J. M., Cho, K., Wagner, R. M., Parks, J. E. II, Diesel Oxidation Catalyst Control of Hydrocarbon Aerosols from Reactivity Controlled Compression Ignition Combustion, ASME IMECE2011-64147, 2011.
28. Zhang, F., Xu, H., Zeraati Rezaei, S., Kalghatgi, G., et al., Combustion and Emission Characteristics of a PPCI Engine Fuelled with Dieseline, SAE Technical Paper 2012-01-1138, 2012, doi: 10.4271/2012-01-1138.
29. Splitter, D., Wissink, M., Kokjohn, S., and Reitz, R., Effect of Compression Ratio and Piston Geometry on RCCI Load Limits and Efficiency, SAE Technical Paper 2012-01-0383, 2012, doi: 10.4271/2012-01-0383.
30. Wissink, M. L., Lim, J. H., Splitter, D. A., Hanson, R. M., Reitz, R. D., Investigation of Injection Strategies to Improve High Efficiency RCCI Combustion with Diesel and Gasoline Direct Injection, ASME ICEF2012-92107, 2012.
31. Eng, J., Characterization of Pressure Waves in HCCI Combustion, SAE Technical Paper 2002-01-2859, 2002, doi: 10.4271/2002-01-2859.
32. Kokjohn, S., Reitz, R., Splitter, D., and Musculus, M., Investigation of Fuel Reactivity Stratification for Controlling PCI Heat-Release Rates Using High-Speed Chemiluminescence Imaging and Fuel Tracer Fluorescence, SAE Int. J. Engines 5 (2): 248-269, 2012, doi: 10.4271/2012-01-0375.
33. Heywood, J. B., Internal Combustion Engines Fundamentals. New York: McGraw-Hill, 1988.
34. Northrop, W. F., Bohac, S. V., Chin, J. Y., Assanis, D. N., Comparison of Filter Smoke Number and Elemental Carbon Mass From Partially Premixed Low Temperature Combustion in a Direct-Injection Diesel Engine, J Eng Gas Turb Power 133 (10): 102804, 2011.
35. Abdul-Khalek, I., Kittelson, D., and Brear, F., The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements, SAE Technical Paper 1999-01-1142, 1999, doi: 10.4271/1999-01-1142.
36. Kamimoto, T. and Bae, M., High Combustion Temperature for the Reduction of Particulate in Diesel Engines, SAE Technical Paper 880423, 1988, doi: 10.4271/880423.
37. Dec, J., A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging, SAE Technical Paper 970873, 1997, doi: 10.4271/970873.
38. Flynn, P., Durrett, R., Hunter, G., zur Loye, A., et al., Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, and Empirical Validation, SAE Technical Paper 1999-01-0509, 1999, doi: 10.4271/1999-01-0509.
39. Musculus, M., Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine, SAE Technical Paper 2006-01-0079, 2006, doi: 10.4271/2006-01-0079.
40. Ekoto, I., Colban, W., Miles, P., Park, S., et al., Sources of UHC Emissions from a Light-Duty Diesel Engine Operating in a Partially Premixed Combustion Regime, SAE Int. J. Engines 2 (1): 1265-1289, 2009, doi: 10.4271/2009-01-1446.
41. Seong, H., Lee, K., Choi, S., Adams, C., et al., Characterization of Particulate Morphology, Nanostructures, and Sizes in Low-Temperature Combustion with Biofuels, SAE Technical Paper 2012-01-0441, 2012, doi: 10.4271/2012-01- 0441.
42. Lapuerta, M., Martos, F. J., Herreros, J. M., Effect of Engine Operating Conditions on the Size of Primary Particles Composing Diesel Soot Agglomerates, J. Aerosol Sci. 38: 455-466, 2007.
43. Lee, K., Zhu, J., Ciatti, S., Yozgatligil, A., et al., Sizes, Graphitic Structures and Fractal Geometry of Light-Duty Diesel Engine Particulates, SAE Technical Paper 2003-01-3169, 2003, doi: 10.4271/2003-01-3169.
44. Lee, K. O., Zhu, J., Song, J., Effects of Exhaust Gas Recirculation on Diesel Particulate Matter Morphology and NOx Emissions, Int. J. Engine Res. 9: 165-175, 2008.
45. De Filippo, A., Maricq, M. M., Diesel Nucleation Mode Particles: Semivolatile or Solid? Environ. Sci. Technol. 42 (21): 7957-7962, 2008.
46. Maricq, M. M., Chemical characterization of particulate emissions from diesel engines: A review, J. Aerosol Sci. 38: 1079-1118, 2007.