Multidisciplinary design optimization: A survey of architectures

AIAA Journal

Volumn 51, Issue 9, 2013, Pages 2049-2075

  Martins, Joaquim R R A ^a   Lambe, Andrew B ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b UNIVERSITY OF TORONTO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL ELEMENTS; DECOMPOSITION STRATEGY; MULTI-DISCIPLINARY SYSTEMS; MULTIDISCIPLINARY DESIGN OPTIMIZATION; MULTIPLE DISCIPLINES; NUMERICAL OPTIMIZATION TECHNIQUES; OPTIMIZATION PROBLEMS; PROBLEM FORMULATION;

DESIGN; OPTIMIZATION; SURVEYS;

DESIGN AIDS;

EID: 84880847600     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.J051895     Document Type: Article

References (212)

1. Schmit, L. A., "Structural Design by Systematic Synthesis," 2nd Conference on Electronic Computation, American Society of Civil Engineers, New York, 1960, pp. 105-132.
2. Schmit, L. A., and Thornton, W. A., "Synthesis of an Airfoil at Supersonic Mach Number," NASA CR-144, Jan. 1965.
3. Schmit, L. A., "Structural Synthesis: Its Genesis and Development," AIAA Journal, Vol. 19, No. 10, 1981, pp. 1249-1263. doi:10.2514/3.7859
4. Schmit, L. A., Jr., "Structural Synthesis: Precursor and Catalyst, Recent Experiences in Multidisciplinary Analysis and Optimization," NASA CP-2337, 1984.
5. Haftka, R. T., "Automated Procedure for Design ofWing Structures to Satisfy Strength and Flutter Requirements," NASA Langley Research Center TN-D-7264, Hampton, VA, 1973.
6. Haftka, R. T., Starnes, J. H., Jr., Barton, F. W., and Dixon, S. C., "Comparison of Two Types of Optimization Procedures for Flutter Requirements," AIAA Journal, Vol. 13, No. 10, 1975, pp. 1333-1339. doi:10.2514/3.60545
7. Haftka, R. T., "Optimization of Flexible Wing Structures Subject to Strength and Induced Drag Constraints," AIAA Journal, Vol. 14, No. 8, 1977, pp. 1106-1977. doi:10.2514/3.7400
8. Haftka, R. T., and Shore, C. P., "Approximate Methods for Combined Thermal/Structural Design," NASA TP-1428, June 1979.
9. Ashley, H., "On Making Things the Best: Aeronautical Uses of Optimization," Journal of Aircraft, Vol. 19, No. 1, 1982, pp. 5-28. doi:10.2514/3.57350
10. Green, J. A., "Aeroelastic Tailoring of Aft-Swept High-Aspect-Ratio CompositeWings," Journal of Aircraft,Vol. 24, No. 11, 1987, pp. 812-819. doi:10.2514/3.45525
11. Grossman, B., Gurdal, Z., Strauch, G. J., Eppard,W. M., and Haftka, R. T., "Integrated Aerodynamic/Structural Design of a Sailplane Wing," Journal of Aircraft, Vol. 25, No. 9, 1988, pp. 855-860. doi:10.2514/3.45670
12. Grossman, B., Haftka, R. T., Kao, P.-J., Polen, D. M., and Rais-Rohani, M., "Integrated Aerodynamic-Structural Design of a TransportWing," Journal of Aircraft, Vol. 27, No. 12, 1990, pp. 1050-1056. doi:10.2514/3.45980
13. Livne, E., Schmit, L., and Friedmann, P., "Towards Integrated Multidisciplinary Synthesis of Actively Controlled Fiber Composite Wings," Journal of Aircraft, Vol. 27, No. 12, 1990, pp. 979-992. doi:10.2514/3.45972
14. Livne, E., "Integrated Aeroservoelastic Optimization: Status and Direction," Journal of Aircraft, Vol. 36, No. 1, 1999, pp. 122-145. doi:10.2514/2.2419
15. Jansen, P., Perez, R. E., and Martins, J. R. R. A., "Aerostructural Optimization of Nonplanar Lifting Surfaces," Journal of Aircraft, Vol. 47, No. 5, 2010, pp. 1491-1503. doi:10.2514/1.44727
16. Ning, S. A., and Kroo, I., "Multidisciplinary Considerations in the Design ofWings andWing Tip Devices," Journal of Aircraft, Vol. 47, No. 2, 2010, pp. 534-543. doi:10.2514/1.41833
17. Kroo, I. M., Altus, S., Braun, R. D., Gage, P. J., and Sobieski, I. P., "Multidisciplinary Optimization Methods for Aircraft Preliminary Design," Proceedings of the AIAA 5th Symposium on Multidisciplinary Analysis and Optimization, AIAA Paper 1994-4325, Panama City Beach, FL, 1994.
18. Manning, V. M., "Large-Scale Design of Supersonic Aircraft via Collaborative Optimization," Ph.D. Thesis, Stanford Univ., Stanford, CA, 1999.
19. Antoine, N. E., and Kroo, I. M., "Framework for Aircraft Conceptual Design and Environmental Performance Studies," AIAA Journal, Vol. 43, No. 10, 2005, pp. 2100-2109. doi:10.2514/1.13017
20. Henderson, R. P., Martins, J. R. R. A., and Perez, R. E., "Aircraft Conceptual Design for Optimal Environmental Performance," The Aeronautical Journal, Vol. 116, No. 1175, Jan. 2012, pp. 1-22.
21. Alonso, J. J., and Colonno, M. R., "Multidisciplinary Optimization with Applications to Sonic-Boom Minimization," Annual Review of Fluid Mechanics, Vol. 44, No. 1, 2012, pp. 505-526. doi:10.1146/annurev-fluid-120710- 101133
22. Balling, R., and Rawlings, M. R., "Collaborative Optimization with Disciplinary Conceptual Design," Structural and Multidisciplinary Optimization, Vol. 20, No. 3, 2000, pp. 232-241. doi:10.1007/s001580050151
23. Choudhary, R., Malkawi, A., and Papalambros, P. Y., "Analytic Target Cascading in Simulation-Based Building Design," Automation in Construction, Vol. 14, No. 4, 2005, pp. 551-568. doi:10.1016/j.autcon.2004.11. 004
24. Geyer, P., "Component-Oriented Decomposition for Multidisciplinary Design Optimization in Building Design," Advanced Engineering Informatics, Vol. 23, No. 1, 2009, pp. 12-31. doi:10.1016/j.aei.2008.06.008
25. He, Y., and McPhee, J., "Multidisciplinary Optimization of Multibody Systems with Application to the Design of Rail Vehicles," Multibody System Dynamics, Vol. 14, No. 2, 2005, pp. 111-135. doi:10.1007/s11044-005-4310-0
26. Enblom, R., "Two-Level Numerical Optimization of Ride Comfort in Railway Vehicles," Journal of Rail and Rapid Transit, Vol. 220, No. 1, 2006, pp. 1-11. doi:10.1243/095440905X33279
27. Potsaid, B., Bellouard, Y., and Wen, J. T.-Y., "A Multidisciplinary Design and Optimization Methodology for the Adaptive Scanning Optical Microscope (ASOM)," Proceedings of the SPIE, Vol. 6289, 2006, pp. 62890L1-62890L12. doi:10.1117/12.680450
28. McAllister, C. D., and Simpson, T. W., "Multidisciplinary Robust Design Optimization of an Internal Combustion Engine," Journal of Mechanical Design, Vol. 125, No. 1, 2003, pp. 124-130. doi:10.1115/1.1543978
29. Kokkolaras, M., Louca, L. S., Delagrammatikas, G. J., Michelena, N. F., Filipi, Z. S., Papalambros, P. Y., Stein, J. L., and Assanis, D. N., "Simulation-Based Optimal Design of Heavy Trucks by Model-Based Decomposition: An Extensive Analytical Target Cascading Case Study," International Journal of Heavy Vehicle Systems,Vol. 11, No. 3/4, 2004, pp. 403-433. doi:10.1504/IJHVS.2004.005456
30. Peri, D., and Campana, E. F., "Multidisciplinary Design Optimization of a Naval Surface Combatant," Journal of Ship Research, Vol. 47, No. 1, 2003, pp. 1-12.
31. Kalavalapally, R., Penmetsa, R., and Grandhi, R., "Multidisciplinary Optimization of a Lightweight Torpedo Structure Subjected to an Underwater Explosion," Finite Elements in Analysis and Design, Vol. 43, No. 2, 2006, pp. 103-111. doi:10.1016/j.finel.2006.07.005
32. Takekoshi, Y., Kawamura, T., Yamaguchi, H., Maeda, M., Ishii, N., Kimura, K., Taketani, T., and Fujii, A., "Study on the Design of Propeller Blade Sections Using the Optimization Algorithm," Journal of Marine Science and Technology, Vol. 10, No. 2, 2005, pp. 70-81. doi:10.1007/s00773-005-0197-y
33. Young, Y., Baker, J., and Motley, M., "Reliability-Based Design and Optimization of Adaptive Marine Structures," Composite Structures, Vol. 92, No. 2, 2010, pp. 244-253. doi:10.1016/j.compstruct.2009.07.024
34. Ganguli, R., "Survey of Recent Developments in Rotorcraft Design Optimization," Journal of Aircraft, Vol. 41, No. 3, 2004, pp. 493-510. doi:10.2514/1.58
35. Glaz, B., Friedmann, P. P., and Liu, L., "Helicopter Vibration Reduction Throughout the Entire Flight Envelope Using Surrogate-Based Optimization," Journal of the American Helicopter Society, Vol. 54, No. 1, 2009, pp. 12007-1-12007-15. doi:10.4050/JAHS.54.012007
36. Fuglsang, P., and Madsen, H., "Optimization Method forWind Turbine Rotors," Journal of Wind Engineering and Industrial Aerodynamics, Vol. 80, Nos. 1-2, 1999, pp. 191-206. doi:10.1016/S0167-6105(98)00191-3
37. Fuglsang, P., Bak, C., Schepers, J. G., Bulder, B., Cockerill, T. T., Claiden, P., Olesen, A., and van Rossen, R., "Site-Specific Design Optimization of Wind Turbines," Wind Energy, Vol. 5, No. 4, 2002, pp. 261-279. doi:10.1002/we.61
38. Kenway, G., and Martins, J. R. R. A., "Aerostructural Shape Optimization of Wind Turbine Blades Considering Site-Specific Winds," 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Sept. 2008. doi:10.2514/6.2008-6025
39. Braun, R. D., Moore, A. A., and Kroo, I. M., "Collaborative Approach to LaunchVehicle Design," Journal of Spacecraft and Rockets,Vol. 34, No. 4, 1997, pp. 478-486. doi:10.2514/2.3237
40. Cai, G., Fang, J., Zheng, Y., Tong, X., Chen, J., and Wang, J., "Optimization of System Parameters for Liquid Rocket Engines with Gas-Generator Cycles," Journal of Propulsion and Power, Vol. 26, No. 1, 2010, pp. 113-119. doi:10.2514/1.40649
41. Hwang, J. T., Lee, D. Y., Cutler, J., and Martins, J. R. R. A., "Large-Scale MDO of a Small Satellite Using a Novel Framework for the Solution of Coupled Systems and Their Derivatives," Proceedings of the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, April 2013. doi:10.2514/6.2013-1599
42. Zingg, D. W., Nemec, M., and Pulliam, T. H., "A Comparative Evaluation of Genetic and Gradient-Based Algorithms Applied to Aerodynamic Optimization," European Journal of Computational Mechanics, Vol. 17, Nos. 1-2, Jan. 2008, pp. 103-126. doi:10.2514/1.40649
43. Nocedal, J., and Wright, S. J., Numerical Optimization, 2nd ed., Springer-Verlag, New York, 2006, p. 321.
44. Tappeta, R. V., and Renaud, J. E., "Multiobjective Collaborative Optimization," Journal of Mechanical Design, Vol. 119, No. 3, 1997, pp. 403-411. doi:10.1115/1.2826362
45. Lewis, K., and Mistree, F., "The Other Side of Multidisciplinary Design Optimization: Accommodating a Multiobjective, Uncertain and Non-Deterministic World," Engineering Optimization, Vol. 31, No. 2, 1998, pp. 161-189. doi:10.1080/03052159808941369
46. Miettinen, K. M., Nonlinear Multiobjective Optimization, Kluwer Academic, Norwell, MA, 1998.
47. Haftka, R. T., and Watson, L. T., "Decomposition Theory for Multidisciplinary Design Optimization Problems with Mixed Integer Quasiseparable Subsystems," Optimization and Engineering, Vol. 7, No. 2, 2006, pp. 135-149. doi:10.1007/s11081-006-6836-2
48. Michalek, J. J., and Papalambros, P. Y., "BB-ATC: Analytical Target Cascading Using Branch and Bound for Mixed Integer Nonlinear Programming," Proceedings of the ASME Design Engineering Technical Conference, Philadelphia, PA, DET2006/DAC-99040, 2006.
49. Zadeh, P. M., Toropov, V. V., and Wood, A. S., "Metamodel-Based Collaborative Optimization Framework," Structural and Multidisciplinary Optimization, Vol. 38, No. 2, 2009, pp. 103-115. doi:10.1007/s00158-008-0286-8
50. Conn, A. R., Schienburg, K., and Vicente, L. N., Introduction to Derivative-Free Optimization, Society for Industrial and Applied Mathematics, Philadelphia, 2009.
51. Rao, S. S., "Game Theory Approach for Multiobjective Structural Optimization," Computers and Structures, Vol. 25, No. 1, 1987, pp. 119-127. doi:10.1016/0045-7949(87)90223-9
52. Lewis, K., and Mistree, F., "Modeling Interactions in Multidisciplinary Design: A Game Theoretic Approach," AIAA Journal, Vol. 35, No. 8, 1997, pp. 1387-1392. doi:10.2514/2.248
53. Honda, T., Cucci, F., and Yang, M. C., "Achieving Pareto Optimality in a Decentralized Design Environment," Proceedings of the International Conference on Engineering Design, Stanford, CA, Aug. 2009.
54. Sobieszczanski-Sobieski, J., Altus, T. D., Phillips, M., and Sandusky, R. R., Jr., "Bilevel Integrated System Synthesis for Concurrent and Distributed Processing," AIAA Journal, Vol. 41, No. 10, 2003, pp. 1996-2003. doi:10.2514/2.1889
55. Tosserams, S., Kokkolaras, M., Etman, L. F. P., and Rooda, J. E., "A Nonhierarchical Formulation of Analytical Target Cascading," Journal of MechanicalDesign,Vol. 132,No. 5, 2010, pp. 051002-1-051002-13. doi:10.1115/1.4001346
56. Roth, B., and Kroo, I., "Enhanced Collaborative Optimization: Application to an Analytic Test Problem and Aircraft Design," 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2008-5841, Sept. 2008.
57. Agte, J., de Weck, O., Sobieszczanski-Sobieski, J., Arendsen, P., Morris, A., and Spieck, M., "MDO: Assessment and Direction for Advancement, An Opinion of One International Group," Structural and Multidisciplinary Optimization, Vol. 40, Nos. 1-6, 2010, pp. 17-33. doi:10.1007/s00158-009-0381-5
58. Kim, H. M., Michelena, N. F., Papalambros, P.Y., and Jiang, T., "Target Cascading in Optimal System Design," Journal of Mechanical Design, Vol. 125, No. 3, 2003, pp. 474-480. doi:10.1115/1.1582501
59. Michelena, N. F., Park, H., and Papalambros, P. Y., "Convergence Properties of Analytical Target Cascading," AIAA Journal, Vol. 41, No. 5, 2003, pp. 897-905. doi:10.2514/2.2025
60. Michalek, J. J., and Papalambros, P. Y., "An Efficient Weighting Update Method to Achieve Acceptable Consistency Deviation in AnalyticalTarget Cascading," Journal of Mechanical Design,Vol. 127, No. 2, 2005, pp. 206-214. doi:10.1115/1.1830046
61. Cramer, E. J., Dennis, J. E., Jr., Frank, P. D., Lewis, R. M., and Shubin, G. R., "Problem Formulation for Multidisciplinary Optimization," SIAM Journal on Optimization, Vol. 4, No. 4, 1994, pp. 754-776. doi:10.1137/0804044
62. Alexandrov, N. M., and Lewis, R. M., "Analytical and Computational Aspects of Collaborative Optimization for Multidisciplinary Design," AIAA Journal, Vol. 40, No. 2, 2002, pp. 301-309. doi:10.2514/2.1646
63. Alexandrov, N. M., and Lewis, R. M., "Reconfigurability in MDO Problem Synthesis, Part 1," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2004-4307, Sept. 2004.
64. Alexandrov, N. M., and Lewis, R. M., "Reconfigurability in MDO Problem Synthesis, Part 2," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2004-4308, Sept. 2004.
65. Wujek, B. A., Renaud, J. E., Batill, S. M., and Brockman, J. B., "Concurrent Subspace Optimization Using DesignVariable Sharing in a Distributed Computing Environment," Concurrent Engineering: Research and Applications, Vol. 4, No. 4, 1996, pp. 361-377. doi:10.1177/1063293X9600400405
66. Haftka, R. T., and Watson, L. T., "Multidisciplinary Design Optimization with Quasiseparable Subsystems," Optimization and Engineering, Vol. 6, No. 1, 2005, pp. 9-20. doi:10.1023/B:OPTE.0000048534.58121.93
67. Sobieszczanski-Sobieski, J., and Haftka, R. T., "Multidisciplinary Aerospace Design Optimization: Survey of Recent Developments," Structural Optimization, Vol. 14, No. 1, 1997, pp. 1-23. doi:10.1007/BF01197554
68. Kodiyalam, S., and Sobieszczanski-Sobieski, J., "Bilevel Integrated System Synthesis with Response Surfaces," AIAA Journal, Vol. 38, No. 8, 2000, pp. 1479-1485. doi:10.2514/2.1126
69. Sellar,R. S., Batill, S. M., and Renaud, J. E., "Response Surface Based, Concurrent Subspace Optimization for Multidisciplinary System Design," 34th AIAA Aerospace Sciences and Meeting Exhibit, AIAA Paper 1996-0714, Jan. 1996.
70. Sobieszczanski-Sobieski, J., Agte, J. S., and Sandusky, R. R., Jr., "Bilevel Integrated System Synthesis," AIAA Journal, Vol. 38, No. 1, 2000, pp. 164-172. doi:10.2514/2.937
71. Shin, M.-K., and Park, G.-J., "Multidisciplinary Design Optimization Based on Independent Subspaces," International Journal for Numerical Methods in Engineering, Vol. 64, 2005, pp. 599-617. doi:10.1002/(ISSN)1097-0207
72. DeMiguel, V., and Murray, W., "A Local Convergence Analysis of Bilevel Decomposition Algorithms," Optimization and Engineering, Vol. 7, No. 2, 2006, pp. 99-133. doi:10.1007/s11081-006-6835-3
73. Braun, R. D., and Kroo, I. M., "Development and Application of the Collaborative Optimization Architecture in a Multidisciplinary Design Environment," Multidisciplinary Design Optimization: State-of-the-Art, edited by Alexandrov, N., and Hussaini, M. Y., Society for Industrial and Applied Mathematics, Philadelphia, 1997, pp. 98-116.
74. Kroo, I. M., "MDOfor Large-Scale Design," Multidisciplinary Design Optimization: State-of-the-Art, edited by Alexandrov, N., and Hussaini, M. Y., Society for Industrial and Applied Mathematics, Philadelphia, 1997, pp. 22-44.
75. Sobieski, I. P., and Kroo, I. M., "Collaborative Optimization Using Response Surface Estimation," AIAA Journal, Vol. 38, No. 10, 2000, pp. 1931-1938. doi:10.2514/2.847
76. Chittick, I. R., and Martins, J. R. R. A., "Aero-Structural Optimization Using Adjoint Coupled Post Optimality Sensitivities," Structural and Multidisciplinary Optimization, Vol. 36, No. 1, 2008, pp. 59-70. doi:10.1007/s00158-007-0200-9
77. Haftka, R. T., Sobieszczanski-Sobieski, J., and Padula, S. L., "On Options for Interdisciplinary Analysis and Design Optimization," Structural Optimization, Vol. 4, No. 2, 1992, pp. 65-74. doi:10.1007/BF01759919
78. Balling, R. J., and Sobieszczanski-Sobieski, J., "Optimization of Coupled Systems:ACritical Overviewof Approaches," AIAA Journal, Vol. 34, No. 1, 1996, pp. 6-17. doi:10.2514/3.13015
79. Alexandrov, N., and Hussaini, M. Y. (eds.), Multidisciplinary Design Optimization: State-of-the-Art, Society for Industrial and Applied Mathematics, Philadelphia, 1997, pp. 22-44.
80. Alexandrov, N. M., "Multilevel Methods for MDO," Multidisciplinary Design Optimization: State-of-the-Art, edited by Alexandrov, N. M., and Hussaini, M. Y., Society for Industrial and Applied Mathematics, Philadelphia, 1997, pp. 79-89.
81. Balling, R. J., "Approaches to MDO Which Support Disciplinary Autonomy," Multidisciplinary Design Optimization: State-of-the-Art, edited by Alexandrov, N. M., and Hussaini, M. Y., Society for Industrial and Applied Mathematics, Philadelphia, 1997, pp. 90-97.
82. Willcox, K., and Wakayama, S., "Simultaneous Optimization of a Multiple-Aircraft Family," Journal of Aircraft, Vol. 40, No. 4, 2003, pp. 616-622. doi:10.2514/2.3156
83. Piperni, P., Abdo, M., Kafyeke, F., and Isikveren, A. T., "Preliminary Aerostructural Optimization of a Large Business Jet," Journal of Aircraft, Vol. 44, No. 5, 2007, pp. 1422-1438. doi:10.2514/1.26989
84. Simpson, T. W., and Martins, J. R. R. A., "Multidisciplinary Design Optimization for Complex Engineered Systems Design: Report from an NSFWorkshop," Journal of Mechanical Design, Vol. 133, No. 10, Oct. 2011, pp. 101002-1-101002-10. doi:10.1115/1.4004465
85. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "A Classification of Methods for Distributed System Optimization Based on Formulation Structure," Structural and Multidisciplinary Optimization, Vol. 39, No. 5, 2009, pp. 503-517. doi:10.1007/s00158-008-0347-z
86. Lambe, A. B., and Martins, J. R. R. A., "Extensions to the Design Structure Matrix for the Description of Multidisciplinary Design, Analysis, and Optimization Processes," Structural and Multidisciplinary Optimization, Vol. 46, No. 2, 2012, pp. 273-284. doi:10.1007/s00158-012-0763-y
87. Steward, D.V., "The Design Structure Matrix:AMethod for Managing the Design of Complex Systems," IEEE Transactions on Engineering Management, Vol. 28, 1981, pp. 71-74. doi:10.1109/TEM.1981.6448589
88. Browning, T. R., "Applying the Design Structure Matrix to System Decomposition and Integration Problems: A Review and New Directions," IEEE Transactions on Engineering Management,Vol. 48, No. 3, 2001, pp. 292-306. doi:10.1109/17.946528
89. Haftka, R. T., "Simultaneous Analysis and Design," AIAA Journal, Vol. 23, No. 7, 1985, pp. 1099-1103. doi:10.2514/3.9043
90. Schmit, L. A., Jr., and Ramanathan, R. K., "Multilevel Approach to Minimum Weight Design Including Buckling Constraints," AIAA Journal, Vol. 16, No. 2, 1978, pp. 97-104. doi:10.2514/3.60867
91. Biegler, L. T., Ghattas, O., Heinkenschloss, M., and van Bloemen Waanders, B. (eds.), Large-Scale PDE-Constrained Optimization, Springer-Verlag, New York, 2003.
92. Squire, W., and Trapp, G., "Using Complex Variables to Estimate Derivatives of Real Functions," SIAM Review, Vol. 40, No. 1, 1998, pp. 110-112. doi:10.1137/S003614459631241X
93. Martins, J. R. R. A., Sturdza, P., and Alonso, J. J., "The Complex-Step Derivative Approximation," ACM Transactions on Mathematical Software, Vol. 29, No. 3, 2003, pp. 245-262. doi:10.1145/838250
94. Adelman, H. M., and Haftka, R. T., "Sensitivity Analysis of Discrete Structural Systems," AIAA Journal, Vol. 24, No. 5, 1986, pp. 823-832. doi:10.2514/3.48671
95. Jameson, A., "Aerodynamic Design via Control Theory," Journal of Scientific Computing, Vol. 3, No. 3, 1988, pp. 233-260. doi:10.1007/ BF01061285
96. Giles, M. B., Duta, M. C., Muller, J.-D., and Pierce, N. A., "Algorithm Developments for Discrete Adjoint Methods," AIAA Journal, Vol. 41, No. 2, 2003, pp. 198-205. doi:10.2514/2.1961
97. van Keulen, F., Haftka, R., and Kim, N., "Review of Options for Structural Design Sensitivity Analysis. Part 1: Linear Systems," Computer Methods in Applied Mechanics and Engineering, Vol. 194, Nos. 30-33, 2005, pp. 3213-3243. doi:10.1016/j.cma.2005.02.002
98. Mader, C. A., Martins, J. R. R. A., Alonso, J. J., and van derWeide, E., "ADjoint: An Approach for the Rapid Development of Discrete Adjoint Solvers," AIAA Journal, Vol. 46, No. 4, 2008, pp. 863-873. doi:10.2514/1.29123
99. Martins, J. R. R. A., Alonso, J. J., and Reuther, J. J., "A Coupled-Adjoint Sensitivity Analysis Method for High-Fidelity Aero-Structural Design," Optimization and Engineering, Vol. 6, No. 1, 2005, pp. 33-62. doi:10.1023/B:OPTE.0000048536.47956.62
100. Barcelos, M., Bavestrello, H., and Maute, K., "A Schur-Newton-Krylov Solver for Steady-State Aeroelastic Analysis and Design Sensitivity Analysis," Computer Methods in Applied Mechanics and Engineering, Vol. 195, Nos. 17-18, 2006, pp. 2050-2069. doi:10.1016/j.cma.2004.09.013
101. Hicken, J., and Zingg, D., "Aerodynamic Optimization Algorithm with Integrated Geometry Parameterization and Mesh Movement," AIAA Journal, Vol. 48, No. 2, Feb. 2009, pp. 400-413. doi:10.2514/1.44033
102. Martins, J. R. R. A., and Hwang, J. T., "Review and Unification of Methods for Computing Derivatives of Multidisciplinary Computational Models," AIAA Journal, 2013. doi:10.2514/1.J052184.
103. Bloebaum, C., "Coupling Strength-Based System Reduction for Complex Engineering Design," Structural Optimization, Vol. 10, No. 2, 1995, pp. 113-121. doi:10.1007/BF01743538
104. Kennedy,G. J., and Martins, J. R. R. A., "Parallel Solution Methods for Aerostructural Analysis and Design Optimization," 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, AIAA Paper 2010-9308, Sept. 2010.
105. Vanderplaats, G. N., "An Efficient Feasible Directions Algorithm for Design Synthesis," AIAA Journal, Vol. 22, No. 11, 1984, pp. 1633-1640. doi:10.2514/3.8829
106. Gill, P. E., Murray, W., and Saunders, M. A., "SNOPT: An SQP Algorithm for Large-Scale Constrained Optimization," SIAM Review, Vol. 47, No. 1, 2005, pp. 99-131. doi:10.1137/S0036144504446096
107. Wright, S. J., Primal-Dual Interior Point Methods, Society for Industrial and Applied Mathematics, Philadelphia, 1997.
108. Sobieszczanski-Sobieski, J., "Sensitivity of Complex, Internally Coupled Systems," AIAA Journal, Vol. 28, No. 1, 1990, pp. 153-160. doi:10.2514/3.10366
109. Kenway,G.K.W.,Kennedy,G. J., and Martins, J. R. R. A., "AScalable Parallel Approach for High-Fidelity Steady-State Aeroelastic Analysis and Derivative Computations," AIAA Journal, 2013 (in press).
110. Kenway,G.K.W., and Martins, J. R. R. A., "Multi-Point High-Fidelity Aerostructural Optimization of a Transport Aircraft Configuration," Journal of Aircraft, 2013 (in press).
111. Marriage, C. J., and Martins, J. R. R. A., "Reconfigurable Semi-Analytic Sensitivity Methods and MDO Architectures Within the ?MDO Framework," 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2008-5956, Sept. 2008.
112. Martins, J. R. R. A., and Hwang, J. T., "Review and Unification of Discrete Methods for Computing Derivatives of Single-and Multi-Disciplinary Computational Models," AIAA Journal (in press).
113. Lasdon, L. S., Optimization Theory for Large Systems, Macmillan, New York, 1970, pp. 104-143, Chap. 2.
114. Conejo, A. J., Nogales, F. J., and Prieto, F. J., "A Decomposition Procedure Based on Approximate Newton Directions," Mathematical Programming, Vol. 93, No. 3, 2002, pp. 495-515. doi:10.1007/s10107-002-0304-3
115. Dantzig, G. B., and Wolfe, P., "Decomposition Principle for Linear Programs," Operations Research, Vol. 8, No. 1, 1960, pp. 101-111. doi:10.1287/opre.8.1.101
116. Benders, J. F., "Partitioning Procedures for Solving Mixed Variables Programming Problems," Numerische Mathematik, Vol. 4, No. 1, 1962, pp. 238-252. doi:10.1007/BF01386316
117. Michelena, N. F., and Papalambros, P. Y., "A Network Reliability Approach to Optimal Decomposition of Design Problems," Journal of Mechanical Design, Vol. 117, No. 3, 1995, pp. 433-440. doi:10.1115/1.2826697
118. Michelena, N. F., and Papalambros, P. Y., "A Hypergraph Framework for Optimal Model-Based Decomposition of Design Problems," Computational Optimization and Applications, Vol. 8, No. 2, 1997, pp. 173-196. doi:10.1023/A:1008673321406
119. Tosserams, S., Hofkamp, A. T., Etman, L. F. P., and Rooda, J. E., "A Specification Language for Problem Partitioning in Decomposition-Based Design Optimization," Structural and Multidisciplinary Optimization, Vol. 42, No. 5, 2010, pp. 707-723. doi:10.1007/s00158-010-0512-z
120. Bertsekas, D. P., and Tsitsiklis, J. N., Parallel and Distributed Computation: Numerical Methods, Athena Scientific, Belmont, MA, 1997, pp. 88-104.
121. Zadeh, P. M., and Toropov, V. V., "Multi-Fidelity Multidisciplinary Design Optimization Based on Collaborative Optimization Framework," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, AIAA Paper 2002-5504, Sept. 2002.
122. Robinson, T. D., Willcox, K. E., Eldred, M. S., and Haimes, R., "Multifidelity Optimization for Variable Complexity Design," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2006-7114, Sept. 2006.
123. Chittick, I. R., and Martins, J. R. R. A., "An Asymmetric Suboptimization Approach to Aerostructural Optimization," Optimization and Engineering, Vol. 10, No. 1, 2009, pp. 133-152. doi:10.1007/s11081-008-9046-2
124. Alexandrov, N. M., and Lewis, R. M., "Comparative Properties of Collaborative Optimization and Other Approaches to MDO," NASA Technical Rept. CR-1999-209354, Hampton, VA, July 1999.
125. DeWit, A. J., andVanKeulen, F., "Overviewof Methods for Multilevel and/or Multidisciplinary Optimization," 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2010-2914, April 2010.
126. Geethaikrishnan, C., Mujumdar, P. M., Sudhakar, K., and Adimurthy, V., "A Hybrid MDO Architecture for Launch Vehicle Conceptual Design," 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2010-2757, April 2010.
127. Sobieszczanski-Sobieski, J., "Optimization by Decomposition:AStep from Hierarchic to Non-Hierarchic Systems," NASA Langley Research Center TR-CP-3031, Hampton, VA, Sept. 1988.
128. Bloebaum, C. L., Hajela, P., and Sobieszczanski-Sobieski, J., "Non-Hierarchic System Decomposition in Structural Optimization," Engineering Optimization, Vol. 19, No. 3, 1992, pp. 171-186. doi:10.1080/03052159208941227
129. Shankar, J., Ribbens, C. J., Haftka, R. T., and Watson, L. T., "Computational Study of a Nonhierarchical Decomposition Algorithm," Computational Optimization and Applications, Vol. 2, No. 3, 1993, pp. 273-293. doi:10.1007/BF01299452
130. Renaud, J. E., and Gabriele, G. A., "Approximation in Non-Hierarchic SystemOptimization," AIAAJournal,Vol. 32,No.1, 1994,pp. 198-205. doi:10.2514/3.11967
131. Renaud, J. E., and Gabriele, G. A., "Improved Coordination in Nonhierarchic System Optimization," AIAA Journal, Vol. 31, No. 12, 1993, pp. 2367-2373. doi:10.2514/3.11938
132. Parashar, S., and Bloebaum, C. L., "Multi-Objective Genetic Algorithm Concurrent Subspace Optimization (MOGACSSO) for Multidisciplinary Design," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2006-2047, May 2006.
133. Huang, C.-H., Galuski, J., and Bloebaum, C. L., "Multi-Objective Pareto Concurrent Subspace Optimization for Multidisciplinary Design," AIAA Journal, Vol. 45, No. 8, 2007, pp. 1894-1906. doi:10.2514/1.19972
134. Zhang, K.-S., Han, Z.-H., Li, W.-J., and Song, W.-P., "Bilevel Adaptive Weighted Sum Method for Multidisciplinary Multi-Objective Optimization," AIAA Journal, Vol. 46, No. 10, 2008, pp. 2611-2622. doi:10.2514/1.36853
135. Parashar, S., and Bloebaum, C. L., "Robust Multi-Objective Genetic Algorithm Concurrent Subspace Optimization (R-MOGACSSO) for Multidisciplinary Design," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2006-6907, Sept. 2006.
136. Tappeta, R. V., Nagendra, S., and Renaud, J. E., "A Multidisciplinary Design Optimization Approach for High Temperature Aircraft Engine Components," Structural Optimization, Vol. 18, Nos. 2-3, 1999, pp. 134-145. doi:10.1007/BF01195988
137. Perez, R. E., Liu, H. H. T., and Behdinan, K., "Evaluation of Multidisciplinary Optimization Approaches for Aircraft Conceptual Design," 10th AIAA/ISSMO Muldisciplinary Analysis and Optimization Conference, AIAA Paper 2004-4537, Aug. 2004.
138. Yi, S. I., Shin, J. K., and Park, G. J., "Comparison of MDO Methods with Mathematical Examples," Structural and Multidisciplinary Optimization, Vol. 39, No. 5, 2008, pp. 391-402. doi:10.1007/s00158-007-0150-2
139. Tedford, N. P., and Martins, J. R. R. A., "Benchmarking Multidisciplinary Design Optimization Algorithms," Optimization and Engineering, Vol. 11, No. 1, 2010, pp. 159-183. doi:10.1007/s11081-009-9082-6
140. de Wit, A. J., and van Keulen, F., "Numerical Comparison of Multi-Level Optimization Techniques," 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2007-1895, April 2007.
141. Braun, R. D., "Collaborative Optimization: An Architecture for Large-Scale Distributed Design," Ph.D. Thesis, Stanford Univ., Stanford, CA, 1996.
142. Braun, R. D., Gage, P. J., Kroo, I. M., and Sobieski, I. P., "Implementation and Performance Issues in Collaborative Optimization," 6th AIAA/USAF/NASA/ISSMO Multidisciplinary Analysis and Optimization Symposium, AIAA Paper 1996-4017, Sept. 1996.
143. DeMiguel, A.-V., and Murray, W., "An Analysis of Collaborative Optimization Methods," 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization,AIAAPaper 2000-4720, 2000.
144. Lin, J. G., "Analysis and Enhancement of Collaborative Optimization for Multidisciplinary Design," AIAA Journal, Vol. 42, No. 2, 2004, pp. 348-360. doi:10.2514/1.9098
145. Fiacco, A. V., and McCormick, G. P., Nonlinear Programming: Sequential Unconstrained Minimization Techniques, Society for Industrial and Applied Mathematics, Philadelphia, 1990, pp. 53-72.
146. Brown, N. F., and Olds, J. R., "Evaluation of Multidisciplinary Optimization Techniques Applied to a Reusable Launch Vehicle," Journal of Spacecraft and Rockets, Vol. 43, No. 6, 2006, pp. 1289-1300. doi:10.2514/1.16577
147. Perez, R. E., "A Multidisciplinary Optimization Framework for Flight Dynamics and Control Integration in Aircraft Design," Ph.D. Thesis, Univ. of Toronto, Toronto, 2007.
148. Marriage, C., "Automatic Implementation of Multidisciplinary Design Optimization Architectures Using ?MDO," M.S. Thesis, Univ. of Toronto, Toronto, 2008.
149. Li, X., Li, W., and Liu, C., "Geometric Analysis of Collaborative Optimization," Structural and Multidisciplinary Optimization,Vol. 35, No. 4, 2008, pp. 301-313. doi:10.1007/s00158-007-0127-1
150. Budianto, I. A., and Olds, J. R., "Design and Deployment of a Satellite Constellation Using Collaborative Optimization," Journal of Spacecraft and Rockets, Vol. 41, No. 6, 2004, pp. 956-963. doi:10.2514/1.14254
151. Ledsinger, L. A., and Olds, J. R., "Optimized Solutions for Kistler K-1 Branching Trajectories Using Multidisciplinary Design Optimization Techniques," Journal of Spacecraft and Rockets, Vol. 39, No. 3, 2002, pp. 420-429. doi:10.2514/2.3825
152. Perez, R. E., Liu, H. H. T., and Behdinan, K., "Multidisciplinary Optimization Framework for Control-Configuration Integration in Aircraft Conceptual Design," Journal of Aircraft, Vol. 43, No. 6, 2006, pp. 1937-1948. doi:10.2514/1.22263
153. Allison, J. T., Roth, B., Kokkolaras, M., Kroo, I. M., and Papalambros, P. Y., "Aircraft Family Design Using Decomposition-Based Methods," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2006-6950, Sept. 2006.
154. McAllister, C. D., Simpson, T.W., Hacker, K., Lewis, K., and Messac, A., "Integrating Linear Physical Programming Within Collaborative Optimization for Multiobjective Multidisciplinary Design Optimization," Structural and Multidisciplinary Optimization, Vol. 29, No. 3, 2005, pp. 178-189. doi:10.1007/s00158-004-0481-1
155. Gu, X., Renaud, J. E., Ashe, L. M., Batill, S. M., Budhiraja, A. S., and Krajewski, L. J., "Decision-Based Collaborative Optimization," Journal of Mechanical Design, Vol. 124, No. 1, 2002, pp. 1-13. doi:10.1115/1.1432991
156. Gu, X. S., Renaud, J. E., and Penninger, C. L., "Implicit Uncertainty Propagation for Robust Col-laborative Optimization," Journal of Mechanical Design, Vol. 128, No. 4, 2006, pp. 1001-1013. doi:10.1115/1.2205869
157. Huang, H.-Z., Tao, Y., and Liu, Y., "Multidisciplinary Collaborative Optimization Using Fuzzy Satisfaction Degree and Fuzzy Sufficiency Degree Model," Soft Computing, Vol. 12, No. 10, 2008, pp. 995-1005. doi:10.1007/s00500-007-0268-6
158. Roth, B. D., "Aircraft Family Design Using Enhanced Collaborative Optimization," Ph.D. Thesis, Stanford Univ., Stanford, CA, 2008.
159. Kodiyalam, S., "Evaluation of Methods for Multidisciplinary Design Optimization (MDO), Phase I," NASA CR-1998-208716, Sept. 1998.
160. Kodiyalam, S., and Yuan, C., "Evaluation of Methods for Multidisciplinary Design Optimization (MDO), Part 2," NASA CR-2000-210313, Nov. 2000.
161. Conn, A. R., Gould, N. I. M., and Toint, P. L., Trust Region Methods, Society for Industrial and Applied Mathematics, Philadelphia, 2000.
162. Kim, H., Ragon, S., Soremekun, G., Malone, B., and Sobieszczanski- Sobieski, J., "Flexible Approximation Model Approach for Bi-Level Integrated System Synthesis," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2004-4545, Aug. 2004.
163. Ahn, J., and Kwon, J. H., "An Efficient Strategy for Reliability-Based Multidisciplinary Design Optimization Using BLISS," Structural and Multidisciplinary Optimization, Vol. 31, No. 5, 2006, pp. 363-372. doi:10.1007/s00158-005-0565-6
164. LeGresley, P. A., and Alonso, J. J., "Improving the Performance of Design Decomposition Methods with POD," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2004-4465, Aug. 2004.
165. Berkooz, G., Holmes, P., and Lumley, J. L., "The Proper Orthogonal Decomposition in the Analysis of Turbulent Flows," Annual Review of Fluid Mechanics, Vol. 25, 1993, pp. 539-575. doi:10.1146/annurev.fl.25.010193.002543
166. Sobieszczanski-Sobieski, J., "Integrated System-of-Systems Synthesis," AIAA Journal, Vol. 46, No. 5, 2008, pp. 1072-1080. doi:10.2514/1.27953
167. Kim, H. M., "Target Cascading in Optimal System Design," Ph.D. Thesis, Univ. of Michigan, Ann Arbor, MI, 2001.
168. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "Augmented Lagrangian Coordination for Distributed Optimal Design in MDO," International Journal for Numerical Methods in Engineering, Vol. 73, 2008, pp. 1885-1910. doi:10.1002/(ISSN)1097-0207
169. Kim, H. M., Chen,W., andWiecek, M. M., "Lagrangian Coordination for Enhancing the Convergence of Analytical Target Cascading," AIAA Journal, Vol. 44, No. 10, 2006, pp. 2197-2207. doi:10.2514/1.15326
170. Tosserams, S., Etman, L. F. P., Papalambros, P. Y., and Rooda, J. E., "An Augmented Lagrangian Relaxation for Analytical Target Cascading Using the Alternating Direction Method of Multipliers," Structural and Multidisciplinary Optimization, Vol. 31, No. 3, 2006, pp. 176-189. doi:10.1007/s00158-005-0579-0
171. Bertsekas, D. P., Constrained Optimization and Lagrange Multiplier Methods, Athena Scientific, Belmont, MA, 1996, pp. 104-125.
172. Li, Y., Lu, Z., and Michalek, J. J., "Diagonal Quadratic Approximation for Parallelization of Analytical Target Cascading," Journal of Mechanical Design, Vol. 130, No. 5, 2008, pp. 051402-1-051402-11. doi:10.1115/1.2838334
173. Ruszczynski, A., "On Convergence of an Augmented Lagrangian Decomposition Method for Sparse Convex Optimization," Mathematics of Operations Research, Vol. 20, No. 3, 1995, pp. 634-656. doi:10.1287/moor.20.3. 634
174. Han, J., and Papalambros, P. Y., "A Sequential Linear Programming Coordination Algorithm for Analytical Target Cascading," Journal of Mechanical Design, Vol. 132, No. 3, 2010, pp. 021003-1-021003-8. doi:10.1115/1.4000758
175. Bazaara, M. S., Sherali, H. D., and Shetty, C. M., Nonlinear Programming: Theory and Algorithms, Wiley, New York, 2006, pp. 568-576.
176. Chen, T.-Y., "Calculation of the Move Limits for the Sequential Linear Programming Method," International Journal for Numerical Methods in Engineering, Vol. 36, No. 15, 1993, pp. 2661-2679. doi:10.1002/(ISSN)1097-0207
177. Han, J., and Papalambros, P. Y., "A Note on the Convergence of Analytical Target Cascading with Infinite Norms," Journal of Mechanical Design, Vol. 132, No. 3, 2010, pp. 034502-1-034502-6. doi:10.1115/1.4001001
178. Kokkolaras, M., Fellini, R., Kim, H. M., Michelena, N. F., and Papalambros, P. Y., "Extension of the Target Cascading Formulation to the Design of Product Families," Structural and Multidisciplinary Optimization, Vol. 24, No. 4, 2002, pp. 293-301. doi:10.1007/s00158-002-0240-0
179. Kim, H. M., Kokkolaras, M., Louca, L. S., Delagrammatikas, G. J., Michelena, N. F., Filipi, Z. S., Papalambros, P. Y., Stein, J. L., and Assanis, D. N., "Target Cascading in Vehicle Redesign: A Class VI Truck Study," International Journal of Vehicle Design, Vol. 29, No. 3, 2002, pp. 199-225. doi:10.1504/IJVD.2002.002010
180. Kim, H. M., Rideout, D. G., Papalambros, P. Y., and Stein, J. L., "Analytical Target Cascading in Automotive Vehicle Design," Journal of Mechanical Design, Vol. 125, No. 3, 2003, pp. 481-490. doi:10.1115/1.1586308
181. Blouin, V. Y., Fadel, G. M., Haque, I. U.,Wagner, J. R., and Samuels, H. B., "Continuously Variable Transmission Design for Optimum Vehicle Performance by Analytical Target Cascading," International Journal of Heavy Vehicle Systems, Vol. 11, No. 3/4, 2004, pp. 327-348. doi:10.1504/IJHVS.2004. 005454
182. Tajima, J., Momiyama, F., and Yuhara, N., "A New Solution for Two-Bag Air Suspension System with Leaf Spring for Heavy-Duty Vehicle," Vehicle System Dynamics, Vol. 44, No. 2, 2006, pp. 107-138. doi:10.1080/ 00423110500385907
183. Chen, Y., Chen, X., and Lin, Y., "The Application of Analytical Target Cascading in Parallel Hybrid Electric Vehicle," IEEE Vehicle Power and Propulsion Conference, IEEE Publ., Piscataway, NJ, 2009, pp. 1602-1607.
184. Han, J., and Papalambros, P. Y., "Optimal Design of Hybrid Electric Fuel CellVehicles Under Uncer-tainty and Enterprise Considerations," Journal of Fuel Cell Science and Technology, Vol. 7, No. 2, 2010, pp. 021020-1-021020-9. doi:10.1115/1.3179762
185. Allison, J. T., Walsh, D., Kokkolaras, M., Papalambros, P. Y., and Cartmell, M., "Analytical Target Cascading in Aircraft Design," 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1325, Jan. 2006.
186. Li, Z., Kokkolaras, M., Papalambros, P. Y., and Hu, S. J., "Product and Process Tolerance Allocation in Multistation Compliant Assembly Using Analytical Target Cascading," Journal of Mechanical Design, Vol. 130, No. 9, 2008, pp. 091701-1-091701-9. doi:10.1115/1.2943296
187. Huang, G. Q., and Qu, T., "Extending Analytical Target Cascading for Optimal Configuration of Supply Chains with Alternative Autonomous Suppliers," International Journal of Production Economics, Vol. 115, No. 1, 2008, pp. 39-54. doi:10.1016/j.ijpe.2008.04.008
188. Michalek, J. J., Feinberg, F. M., and Papalambros, P. Y., "Linking Marketing and Engineering Product Design Decisions via Analytical Target Cascading," Journal of Product Innovation Management, Vol. 22, No. 1, 2005, pp. 42-62. doi:10.1111/jpim.2005.22.issue-1
189. Huang, G. Q., Qu, T., Cheung, D. W. L., and Liang, L., "Extensible Multi-Agent System for Optimal Design of Complex Systems Using Analytical Target Cascading," International Journal of Advanced Manufacturing Technology, Vol. 30, Nos. 1-10, 2006, pp. 917-926. doi:10.1007/s00170-005-0064-3
190. Etman, L. F. P., Kokkolaras, M., Hofkamp, A. T., Papalambros, P. Y., and Rooda, J. E., "Coordination Specification in Distributed Optimal Design of Multilevel Systems Using the ? Language," Structural and Multidisciplinary Optimization, Vol. 29, No. 3, 2005, pp. 198-212. doi:10.1007/s00158-004-0467-z
191. Kokkolaras, M., Mourelatos, Z. P., and Papalambros, P. Y., "Design Optimization of Hierarchically Decomposed Multilevel Systems Under Uncertainty," Journal of Mechanical Design, Vol. 128, No. 2, 2006, pp. 503-508. doi:10.1115/1.2168470
192. Liu, H., Chen,W.,Kokkolaras, M., Papalambros, P.Y., and Kim, H. M., "Probabilistic Analytical Target Cascading: A Moment Matching Formulation for Multilevel Optimization Under Uncertainty," Journal of Mechanical Design, Vol. 128, No. 4, 2006, pp. 991-1000. doi:10.1115/1.2205870
193. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "Block-Separable Linking Constraints in Augmented Lagrangian Coordination in MDO," Structural and Multidisciplinary Optimization, Vol. 37, No. 5, 2009, pp. 521-527. doi:10.1007/s00158-008-0244-5
194. DeMiguel, A.-V., "Two Decomposition Algorithms for Nonconvex Optimization Problems with GlobalVariables," Ph.D. Thesis, Stanford Univ., Stanford, CA, 2001.
195. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "An Augmented Lagrangian Decomposition Method for Quasiseparable Problems in MDO," Structural and Multidisciplinary Optimization, Vol. 34, No. 3, 2007, pp. 211-227. doi:10.1007/s00158-006-0077-z
196. Shin, M. K., Kang, B. S., and Park, G. J., "Application of the Multidisciplinary Design Optimization Algorithm to the Design of a Belt-Integrated Seat While Considering Crashworthiness," Journal of Automobile Engineering, Vol. 219, No. 11, 2005, pp. 1281-1292. doi:10.1243/095440705X34928
197. Liu, B., Haftka, R. T., and Watson, L. T., "Global-Local Structural Optimization Using Response Surfaces of Local Optimization Margins," Structural and Multidisciplinary Optimization, Vol. 27, No. 5, 2004, pp. 352-359. doi:10.1007/s00158-004-0393-0
198. Martins, J. R. R. A., Alonso, J. J., and Reuther, J. J., "High-Fidelity Aerostructural Design Optimization of a Supersonic Business Jet," Journal of Aircraft, Vol. 41, No. 3, 2004, pp. 523-530. doi:10.2514/1.11478
199. Kennedy, G., Martins, J. R. R. A., and Hansen, J. S., "Aerostructural Optimization of Aircraft Structures Using Asymmetric Subspace Optimization," 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2008-5847, Sept. 2008.
200. Kaufman, M., Balabanov, V., Burgee, S. L., Giunta, A. A., Grossman, B., Haftka, R. T., Mason, W. H., and Watson, L. T., "Variable-Complexity Response Surface Approximations for Wing Structural Weight in HSCT Design," Computational Mechanics, Vol. 18, No. 2, 1996, pp. 112-126. doi:10.1007/BF00350530
201. Hosder, S., Watson, L. T., Grossman, B., Mason, W. H., Kim, H., Haftka, R. T., and Cox, S. E., "Polynomial Response Surface Approximations for the Multidisciplinary Design Optimization of a High Speed Civil Transport," Optimization and Engineering, Vol. 2, No. 4, 2001, pp. 431-452. doi:10.1023/A:1016094522761
202. Hulme, K. F., and Bloebaum, C. L., "A Simulation-Based Comparison of Multidisciplinary Design Optimization Solution Strategies Using CASCADE," Structural and Multidisciplinary Optimization, Vol. 19, No. 1, 2000, pp. 17-35. doi:10.1007/s001580050083
203. Allison, J. T., Kokkolaras, M., and Papalambros, P. Y., "On Selecting Single-Level Formulations for Complex System Design Optimization," Journal of Mechanical Design, Vol. 129, No. 9, 2007, pp. 898-906. doi:10.1115/1.2747632
204. Martins, J. R. R. A., Marriage, C., and Tedford, N., "pyMDO: An Object-Oriented Framework for Multidisciplinary Design Optimization," ACM Transactions on Mathematical Software, Vol. 36, No. 4, 2009, pp. 20:1-20:25. doi:10.1145/1555386
205. Gray, J., Moore, K. T., and Naylor, B. A., "OpenMDAO: An Open Source Framework for Multidisciplinary Analysis and Optimization," 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, AIAA Paper 2010-9101, Sept. 2010.
206. Lu, Z., and Martins, J. R. R. A., "Graph Partitioning-Based Coordination Methods for Large-Scale Multidisciplinary Design Optimization Problems," Proceedings of the 14th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Indianapolis, IN, AIAA Paper 2012-5522, 2012.
207. Padula, S. L., and Gillian, R. E., "Multidisciplinary Environments: A History of Engineering Framework Development," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, AIAA Paper 2006-7083, Sept. 2006.
208. Kodiyalam, S., and Sobieszczanski-Sobieski, J., "Multidisciplinary Design Optimization: Somemal Methods, Framework Requirements, and Application to Vehicle Design," International Journal of Vehicle Design, Vol. 25, No. 1/2, 2001, pp. 3-22. doi:10.1504/IJVD.2001.001904
209. Kodiyalam, S., Kremenetsky, M., and Posey, S., "Balanced HPC Infrastructure forCFD and Associated Multi-Discipline Simulations of Engineering Systems," Journal of Aerospace Sciences and Technologies, Vol. 61, No. 3, 2009, pp. 434-443.
210. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "A Micro-Accelerometer MDO Benchmark Problem," Structural and Multidisciplinary Optimization, Vol. 41, No. 2, 2010, pp. 255-275. doi:10.1007/s00158-009-0422-0
211. Tosserams, S., Etman, L. F. P., and Rooda, J. E., "Multi-Modality in Augmented Lagrangian Co-ordination for Distributed Optimal Design," Structural and Multidisciplinary Optimization, Vol. 40, Nos. 1-6, 2010, pp. 329-352. doi:10.1007/s00158-009-0371-7
212. Padula, S. L., Alexandrov, N., and Green, L. L., "MDO Test Suite at NASA Langley Research Center," 6th AIAA/NASA/ISSMOSymposium on Multidisciplinary Analysis and Optimization, AIAA Paper 1996-4028, Sept. 1996.