Reliability evaluation of alumina-blasted/acid-etched versus laser-sintered dental implants

Lasers in Medical Science

Volumn 28, Issue 3, 2013, Pages 851-858

  Almeida, Erika O ^a   Júnior, Amilcar C Freitas ^a   Bonfante, Estevam A ^b   Silva, Nelson R F A ^c   Coelho, Paulo G ^a,d  

^a NEW YORK UNIVERSITY   (United States)

^b Inst Ciencias Exatas e da Natureza   (Brazil)

^c FEDERAL UNIVERSITY OF MINAS GERAIS   (Brazil)

^d NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

Author keywords

Dental implant; Laser solid state; Reliability; Step stress accelerated life testing; Weibull analysis

Indexed keywords

ACRYLIC ACID RESIN; DENTAL ALLOY; TOOTH CEMENT;

ALUMINA BLASTED ACID ETCHED DENTAL IMPLANT; ANALYTIC METHOD; ANALYTICAL PARAMETERS; ARTICLE; BETA VALUE; BIOMEDICAL TECHNOLOGY ASSESSMENT; CEMENTATION; CONTROLLED STUDY; DENTAL ABUTMENT; DENTAL TECHNOLOGY; FRACTOGRAPHIC ANALYSIS; INTERMETHOD COMPARISON; LASER SINTERED DENTAL IMPLANT; MATERIALS TESTING; MECHANICAL STRESS; ORAL SCREW; POLARIZATION MICROSCOPY; PRIORITY JOURNAL; PROBABILITY; PROSTHESIS FAILURE; RELIABILITY; SCANNING ELECTRON MICROSCOPY; SOLID STATE LASER; STEP STRESS ACCELERATED LIFE TESTING; TOOTH CROWN; TOOTH IMPLANT; WEIBULL ANALYSIS;

ACID ETCHING, DENTAL; ALUMINUM OXIDE; CROWNS; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL MATERIALS; DENTAL RESTORATION FAILURE; EQUIPMENT FAILURE ANALYSIS; HUMANS; LASERS, SOLID-STATE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; SURFACE PROPERTIES;

EID: 84880704407     PISSN: 02688921     EISSN: 1435604X     Source Type: Journal    
DOI: 10.1007/s10103-012-1170-8     Document Type: Article

References (46)

1. Mangano C, Raspanti M, Traini T, Piattelli A, Sammons R (2009) Stereo imaging and cytocompatibility of a model dental implant surface formed by direct laser fabrication. J Biomed Mater Res A 88(3):823-831. doi: 10.1002/jbm.a.32033
2. Traini T, Mangano C, Sammons RL, Mangano F, Macchi A, Piattelli A (2008) Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. Dent Mater 24(11):1525-1533. doi: 10.1016/j.dental.2008.03.029
3. Mangano C, Mangano F, Shibli JA, Luongo G, De Franco M, Briguglio F, Figliuzzi M, Eccellente T, Rapani C, Piombino M, Macchi A (2011) Prospective clinical evaluation of 201 direct laser metal forming implants: results from a 1-year multicenter study. Lasers Med Sci. doi: 10.1007/s10103-011-0904-3
4. Romeo E, Lops D, Margutti E, Ghisolfi M, Chiapasco M, Vogel G (2004) Long-term survival and success of oral implants in the treatment of full and partial arches: a 7-year prospective study with the ITI dental implant system. Int J Oral Maxillofac Implants 19(2):247-259
5. Khayat PG, Milliez SN (2007) Prospective clinical evaluation of 835 multithreaded tapered screw-vent implants: results after two years of functional loading. Journal Oral Implantol 33(4):225-231. doi: 10.1563/1548-1336(2007) 33[225:PCEOMT]2.0.CO;2
6. Astrand P, Engquist B, Dahlgren S, Grondahl K, Engquist E, Feldmann H (2004) Astra Tech and Branemark system implants: a 5-year prospective study of marginal bone reactions. Clin Oral Implants Res 15(4):413-420. doi: 10.1111/j.1600-0501.2004.01028.x
7. Coelho PG, Granjeiro JM, Romanos GE, Suzuki M, Silva NR, Cardaropoli G, Thompson VP, Lemons JE (2009) Basic research methods and current trends of dental implant surfaces. J Biomed Mater Res B Appl Biomater 88(2):579-596. doi: 10.1002/jbm.b.31264
8. Mangano C, Piattelli A, Raspanti M, Mangano F, Cassoni A, Iezzi G, Shibli JA (2011) Scanning electron microscopy (SEM) and X-ray dispersive spectrometry evaluation of direct laser metal sintering surface and human bone interface: a case series. Lasers Med Sci 26(1):133-138. doi: 10.1007/s10103-010-0831-8
9. Frenkel SR, Simon J, Alexander H, Dennis M, Ricci JL (2002) Osseointegration on metallic implant surfaces: effects of microgeometry and growth factor treatment. J Biomed Mater Res 63(6):706-713. doi: 10.1002/jbm.10408
10. Soboyejo WO, Nemetski B, Allameh S, Marcantonio N, Mercer C, Ricci J (2002) Interactions between MC3T3-E1 cells and textured Ti6Al4V surfaces. J Biomed Mater Res 62(1):56-72. doi: 10.1002/jbm.10221
11. Oyonarte R, Pilliar RM, Deporter D, Woodside DG (2005) Peri-implant bone response to orthodontic loading: Part 1. A histomorphometric study of the effects of implant surface design. Am J Orthod Dentofacial Orthop 128(2):173-181. doi: 10.1016/j.ajodo.2004.02.023
12. Pilliar RM, Sagals G, Meguid SA, Oyonarte R, Deporter DA (2006) Threaded versus porous-surfaced implants as anchorage units for orthodontic treatment: three-dimensional finite element analysis of peri-implant bone tissue stresses. Int J Oral Maxillofac Implants 21(6):879-889
13. Palmquist A, Emanuelsson L, Branemark R, Thomsen P (2011) Biomechanical, histological and ultrastructural analyses of laser micro- and nano-structured titanium implant after 6 months in rabbit. J Biomed Mater Res B Appl Biomater 97(2):289-298. doi: 10.1002/jbm.b.31814
14. Witek L, Marin C, Granato R, Bonfante EA, Campos F, Bisinotto J, Suzuki M, Coelho PG (2012) Characterization and in vivo evaluation of laser sintered dental endosseous implants in dogs. J Biomed Mater Res B Appl Biomater. doi: 10.1002/jbm.b.32725
15. Al-Omari WM, Shadid R, Abu-Naba'a L, El Masoud B (2010) Porcelain fracture resistance of screw-retained, cement-retained, and screw-cement- retained implant-supported metal ceramic posterior crowns. J Prosthodont 19(4):263-273. doi: 10.1111/j.1532-849X.2009.00560.x
16. Dittmer MP, Dittmer S, Borchers L, Kohorst P, Stiesch M (2011) Influence of the interface design on the yield force of the implant-abutment complex before and after cyclic mechanical loading. J Prosthodont Res. doi: 10.1016/j.jpor.2011.02.002
17. Kohal RJ, Wolkewitz M, Tsakona A (2011) The effects of cyclic loading and preparation on the fracture strength of zirconium-dioxide implants: an in vitro investigation. Clin Oral Implants Res 22(8):808-814. doi: 10.1111/j.1600-0501. 2010.02067.x
18. Ribeiro CG, Maia ML, Scherrer SS, Cardoso AC, Wiskott HW (2011) Resistance of three implant-abutment interfaces to fatigue testing. J Appl Oral Sci 19:413-420
19. Freitas AC Jr, Bonfante EA, Rocha EP, Silva NR, Marotta L, Coelho PG (2011) Effect of implant connection and restoration design (screwed vs. cemented) in reliability and failure modes of anterior crowns. Eur J Oral Sci 119(4):323-330. doi: 10.1111/j.1600-0722.2011.00837.x
20. Karl M, Kelly JR (2009) Influence of loading frequency on implant failure under cyclic fatigue conditions. Dent Mater 25(11):1426-1432. doi: 10.1016/j.dental.2009.06.015
21. Lee CK, Karl M, Kelly JR (2009) Evaluation of test protocol variables for dental implant fatigue research. Dent Mater 25(11):1419-1425. doi: 10.1016/j.dental.2009.07.003
22. Coelho PG, Bonfante EA, Silva NR, Rekow ED, Thompson VP (2009) Laboratory simulation of Y-TZP all-ceramic crown clinical failures. J Dent Res 88(4):382-386. doi: 10.1177/0022034509333968
23. Silva NR, Bonfante EA, Zavanelli RA, Thompson VP, Ferencz JL, Coelho PG (2010) Reliability of metalloceramic and zirconia-based ceramic crowns. J Dent Res 89(10):1051-1056. doi: 10.1177/0022034510375826
24. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP (2010) Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont 23(5):434-442
25. Bonfante EA, Coelho PG, Navarro JM Jr, Pegoraro LF, Bonfante G, Thompson VP, Silva NR (2010) Reliability and failure modes of implant-supported Y-TZP and MCR three-unit bridges. Clin Implant Dent Relat Res 12(3):235-243. doi: 10.1111/j.1708-8208.2009.00156.x
26. Coelho PG, Silva NR, Bonfante EA, Guess PC, Rekow ED, Thompson VP (2009) Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater 25(9):1122-1127. doi: 10.1016/j.dental.2009.03.009
27. Abernethy R (2006) The new Weibull handbook, 5th edn. Dr. Robert B. Abernethy, North Palm Beach
28. Zhao WE (2005) A general accelerated life model for step-stress testing. IEEE Trans Reliabil 37:1059-1069
29. Reliasoft (2010) The Weibull Distribution and Beta. http://www.weibull. com/hotwire/issue110/hottopics110.htm
30. Nelson W (1990) Accelerated testing: statistical models, test plans and data analysis. Wiley, New York
31. Nelson W (2004) Accelerated testing: statistical models, test plans and data analysis. Wiley, New York
32. Hellsing G (1980) On the regulation of interincisor bite force in man. J Oral Rehabil 7(5):403-411
33. Manda MG, Psyllaki PP, Tsipas DN, Koidis PT (2009) Observations on an in-vivo failure of a titanium dental implant/abutment screw system: a case report. J Biomed Mater Res B Appl Biomater 89(1):264-273. doi: 10.1002/jbm.b.31211
34. Parrington R (2002) Fractography of metals and plastics In: Park M (ed) Practical Failure Analysis. ASM International. 2(5):16-22
35. Rong M, Zhou L, Gou Z, Zhu A, Zhou D (2009) The early osseointegration of the laser-treated and acid-etched dental implants surface: an experimental study in rabbits. J Mater Sci Mater Med 20(8):1721-1728. doi: 10.1007/s10856-009-3730-4
36. Cho SA, Jung SK (2003) A removal torque of the laser-treated titanium implants in rabbit tibia. Biomaterials 24(26):4859-4863
37. Faeda RS, Tavares HS, Sartori R, Guastaldi AC, Marcantonio E Jr (2009) Biological performance of chemical hydroxyapatite coating associated with implant surface modification by laser beam: biomechanical study in rabbit tibias. J Oral Maxillofac Surg 67(8):1706-1715. doi: 10.1016/j.joms.2009.03.046
38. Silva NR, de Souza GM, Coelho PG, Stappert CF, Clark EA, Rekow ED, Thompson VP (2008) Effect of water storage time and composite cement thickness on fatigue of a glass-ceramic trilayer system. J Biomed Mater Res B Appl Biomater 84(1):117-123. doi: 10.1002/jbm.b.30851
39. Zarb GA, Schmitt A (1990) The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part III: problems and complications encountered. J Prosthet Dent 64(2):185-194
40. Naert I, Quirynen M, van Steenberghe D, Darius P (1992) A study of 589 consecutive implants supporting complete fixed prostheses. Part II: prosthetic aspects. J Prosthet Dent 68(6):949-956
41. Pylant T, Triplett RG, Key MC, Brunsvold MA (1992) A retrospective evaluation of endosseous titanium implants in the partially edentulous patient. Int J Oral Maxillofac Implants 7(2):195-202
42. Gunne J, Jemt T, Linden B (1994) Implant treatment in partially edentulous patients: a report on prostheses after 3 years. Int J Prosthodont 7(2):143-148
43. Lekholm U, Gunne J, Henry P, Higuchi K, Linden U, Bergstrom C, van Steenberghe D (1999) Survival of the Branemark implant in partially edentulous jaws: a 10-year prospective multicenter study. Int J Oral Maxillofac Implants 14(5):639-645
44. Henry PJ, Laney WR, Jemt T, Harris D, Krogh PH, Polizzi G, Zarb GA, Herrmann I (1996) Osseointegrated implants for single-tooth replacement: a prospective 5-year multicenter study. Int J Oral Maxillofac Implants 11(4):450-455
45. Adell R, Lekholm U, Rockler B, Branemark PI (1981) A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 10(6):387-416
46. Goodacre CJ, Kan JY, Rungcharassaeng K (1999) Clinical complications of osseointegrated implants. J Prosthet Dent 81(5):537-552