Prospects and challenges of rendering tissue density in Hounsfield units for cone beam computed tomography

Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology

Volumn 116, Issue 1, 2013, Pages 105-119

  Molteni, Roberto ^a  

^a NONE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84879099881     PISSN: 22124403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.oooo.2013.04.013     Document Type: Review

References (47)

1. L.J. Fuh, H.L. Huang, and C.S. Chen Variations in bone density at dental implant sites in different regions of the jawbone J Oral Rehabil 37 2010 346 351
2. I. Turkyilmaz, T.F. Tözüm, C. Tumer, and E.N. Ozbek Assessment of correlation between computerized tomography values of the bone, and maximum torque and resonance frequency values at dental implant placement J Oral Rehabil 33 2006 881 888
3. M. Sogo, K. Ikebe, T.C. Yang, M. Wada, and Y. Maeda Assessment of bone density in the posterior maxilla based on Hounsfield units to enhance the initial stability of implants Clin Implant Dent Relat Res 14 suppl 1 2012 e183 e187
4. R.C. de Oliveira, C.R. Leles, L.M. Normanha, C. Lindh, and R.F. Ribeiro-Rotta Assessments of trabecular bone density at implant sites on CT images Oral Surg Oral Med Oral Pathol Oral Radiol Endod 105 2008 231 238
5. M.R. Norton, and C. Gamble Bone classification: an objective scale of bone density using the computerized tomography scan Clin Oral Implants Res 12 2001 79 84
6. Ribeiro-Rotta RF, de Oliveira RC, Dias DR, Lindh C, Leles CR. Bone tissue microarchitectural characteristics at dental implant sites part 2: correlation with bone classification and primary stability. Clin Oral Implants Res. Epub ahead of print; http://dx.doi.org/10.1111/clr.12046.
7. I.M. Silva, D.Q. Freitas, G.M. Ambrosano, F.N. Bóscolo, and S.M. Almeida Bone density: comparative evaluation of Hounsfield units in multislice and cone-beam computed tomography Braz Oral Res 26 2012 550 556
8. B. Hohlweg-Majert, C. Pautke, H. Deppe, M.C. Metzger, K. Wagner, and D. Schulze Qualitative and quantitative evaluation of bony structures based on DICOM dataset J Oral Maxillofac Surg 69 2011 2763 2770
9. B. Hohlweg-Majert, M.C. Metzger, T. Kummer, and D. Schulze Morphometric analysis - cone beam computed tomography to predict bone quality and quantity J Craniomaxillofac Surg 39 2011 330 334
10. J.A. Bryant, N.A. Drage, and S. Richmond Study of the scan uniformity from an i-CAT cone beam computed tomography dental imaging system Dentomaxillofac Radiol 37 2008 365 374
11. Y. Hua, O. Nackaerts, J. Duyck, F. Maes, and R. Jacobs Bone quality assessment based on cone beam computed tomography imaging Clin Oral Implants Res 20 2009 767 771
12. A. Katsumata, A. Hirukawa, and S. Okumura Relationship between density variability and imaging volume size in cone-beam computerized tomographic scanning of the maxillofacial region: an in vitro study Oral Surg Oral Med Oral Pathol Oral Radiol Endod 107 2009 420 425
13. M.O. Lagravère, J. Carey, M. Ben-Zvi, G.V. Packota, and P.W. Major Effect of object location on the density measurement and Hounsfield conversion in a NewTom 3G cone beam computed tomography unit Dentomaxillofac Radiol 37 2008 305 308
14. M. Naitoh, A. Hirukawa, A. Katsumata, and E. Ariji Evaluation of voxel values in mandibular cancellous bone: relationship between cone-beam computed tomography and multislice helical computed tomography Clin Oral Implants Res 20 2009 503 506
15. M. Naitoh, A. Hirukawa, A. Katsumata, and E. Ariji Prospective study to estimate mandibular cancellous bone density using large-volume cone-beam computed tomography Clin Oral Implants Res 21 2010 1309 1313
16. M.Á. Fuster-Torres, M. Peñarrocha-Diago, D. Peñarrocha-Oltra, and M. Peñarrocha-Diago Relationships between bone density values from cone beam computed tomography, maximum insertion torque, and resonance frequency analysis at implant placement: a pilot study Int J Oral Maxillofac Implants 26 2011 1051 1056
17. A. Katsumata, A. Hirokawa, and S. Okumura Effects of image artifacts on gray-value density in limited-volume cone-beam computerized tomography Oral Surg Oral Med Oral Pathol Oral Radiol Endod 104 2007 829 836
18. P. Mah, T.E. Reeves, and W.D. McDavid Deriving Hounsfield units using grey levels in cone beam computed tomography Dentomaxillofac Radiol 39 2010 323 335
19. Y. Nomura, H. Watanabe, E. Honda, and T. Kurabayashi Reliability of voxel values from cone-beam computed tomography for dental use in evaluating bone mineral density Clin Oral Implants Res 21 2010 558 562
20. O. Nackaerts, F. Maes, H. Yan, P. Couto Souza, R. Pauwels, and R. Jacobs Analysis of intensity variability in multislice and cone beam computed tomography Clin Oral Implants Res 22 2011 873 879
21. R. Pauwels, H. Stamatakis, and G. Manousaridis Development and applicability of a quality control phantom for dental cone-beam CT J Appl Clin Med Phys 12 2011 245 260
22. Y. Nomura, H. Watanabe, K. Shirotsu, E. Honda, Y. Sumi, and T. Kurabayshi Stability of voxel values from cone-beam computed tomography for dental use in evaluating bone mineral content Clin Oral Implants Res 2012 10.1111/j.1600-0501. 2012.02420.x [e-pub ahead of print]
23. R. Pauwels, O. Nackaerts, Bellaiche N. SEDENTEXCT Project Consortium Variability of dental cone beam CT grey values for density estimations Br J Radiol 86 2013 20120135
24. G.N. Hounsfield Computed medical imaging - nobel lecture, 8 December 1979 J Radiol 61 1980 459 468
25. NIST (National Institute of Science and technology) - X-ray Mass Attenuation Coefficients. Available at: http://www.nist.gov/pml/data/xraycoef/ index.cfm. Accessed March 10, 2013.
26. M. Bhat, J. Pattison, G. Bibbo, and M. Caon Diagnostic X-ray spectra: a comparison of spectra generated by different computational methods with a measured spectrum Med Phys 25 1998 114 120
27. B.R. Lankipalli, W.D. McDavid, S.B. Dove, E. Wieckowska, R.G. Waggener, and J.R. Mercier Comparison of five methods for the derivation of spectra for a constant potential dental X-ray unit Dentomaxillofac Radiol 30 2001 264 269
28. C.E. Misch Contemporary Implant Dentistry 3rd ed. 2008 Mosby St. Louis MO
29. R.A. Jaffin, and C.L. Berman The excessive loss of Brånemark fixtures in type IV bone: a 5 year analysis J Periodont 62 1991 2 4
30. J.A. Bryant, N.A. Drage, and S. Richmond Is it time to set a Hounsfield standard? Dentomaxillofac Radiol 38 2009 306
31. T.E. Reeves, P. Mah, and W.D. McDavid Deriving Hounsfield units using grey levels in cone beam CT: a clinical application Dentomaxillofac Radiol 41 2012 500 508
32. M.O. Lagravère, Y. Fang, J. Carey, R.W. Toogood, G.V. Packota, and P.W. Major Density conversion factor determined using a cone-beam computed tomography unit NewTom QR-DVT 9000 Dentomaxillofac Radiol 35 2006 407 409
33. T. Gomi, K. Koshida, and T. Miyati Development of a cone angle weighted three-dimensional image reconstruction algorithm to reduce cone-beam artefacts Dentomaxillofac Radiol 35 2006 398 406
34. E.P. Rührnschopf, and K. Klingenbeck A general framework and review of scatter correction methods in cone beam CT. Part 2: scatter estimation approaches Med Phys 38 2011 5186 5199
35. J.H. Siewerdsen, and D.A. Jaffray Cone-beam computed tomography with a flat-panel imager: magnitude and effects of X-ray scatter Med Phys 28 2001 220 231
36. J.H. Siewerdsen, M.J. Daly, and B. Bakhtiar A simple, direct method for X-ray scatter estimation and correction in digital radiography and cone-beam CT Med Phys 33 2006 187 197
37. G. Jarry, S.A. Graham, D.J. Moseley, D.J. Jaffray, J.H. Siewerdsen, and F. Verhaegen Characterization of scattered radiation in kV CBCT images using Monte Carlo simulations Med Phys 33 2006 4320 4329
38. A.K. Hunter, and W.D. McDavid Characterization and correction of cupping effect artefacts in cone beam CT Dentomaxillofac Radiol 41 2012 217 223
39. J.F. Barrett, and N. Keat Artifacts in CT: recognition and avoidance RadioGraphics 24 2004 1679 1691
40. A. Katsumata, A. Hirukawa, and Noujeiem M. Image artifact in dental cone-beam CT Oral Surg Oral Med Oral Pathol Oral Radiol Endod 101 2006 652 657
41. E. Meyer, R. Raupach, M. Lell, B. Schmidt, and M. Kachelrieß Frequency split metal artifact reduction (FSMAR) in computed tomography Med Phys 39 2012 1904 1916
42. M. Abdoli, R.A. Dierckx, and H. Zaidi Metal artifact reduction strategies for improved attenuation correction in hybrid PET/CT imaging Med Phys 39 2012 3343 3360
43. S. Tonhak, A.J.H. Mehnert, M. Mahoney, and S. Crozier Dental CT metal artifact reduction based on sequential substitution Dentomaxillofac Radiol 40 2011 184 190
44. B. Bechara, W.S. Moore, C.A. McMahan, and M. Noujeim Metal artifact reduction with cone beam CT: an in vitro study Dentomaxillofac Radiol 41 2012 248 253
45. B. Bechara, C.A. McMahan, H. Geha, and M. Noujeim Evaluation of a cone beam CT artifact reduction algorithm Dentomaxillofac Radiol 41 2012 422 428
46. B. Kratz, I. Weyers, and T. Buzug A fully 3D approach for metal artifact reduction in computer tomography Med Phys 39 2012 7042 7054
47. Gammex General Catalogue - Radiation Oncology Section, Gammex 467, p. 148. Available at: http://www.gammex.com/ace-files/Gammex-Catalog.pdf Accessed March 10, 2013.