Overview: Damage resistance of graded ceramic restorative materials

Journal of the European Ceramic Society

Volumn 32, Issue 11, 2012, Pages 2623-2632

  Zhang, Yu ^a  

^a NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

Author keywords

Dental ceramics; Fatigue; Flexural damage resistance; Graded structures; Sliding contact resistance; Zirconia

Indexed keywords

ALL-CERAMIC; DAMAGE RESISTANCE; DENTAL CERAMIC; DENTAL RESTORATIONS; ENGINEERING APPLICATIONS; GRADED CERAMIC; GRADED STRUCTURE; MECHANICAL INTEGRITY; MECHANICAL RESPONSE; RESTORATIVE MATERIALS; SPATIAL GRADIENTS;

BIOMECHANICS; CERAMIC MATERIALS; DENTAL MATERIALS; FATIGUE OF MATERIALS; FATIGUE TESTING; FILLING; ZIRCONIA;

FATIGUE DAMAGE;

EID: 84862825858     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2012.02.020     Document Type: Review

References (75)

1. Lawn B.R., Deng Y., Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent 2001, 86:495-510.
2. European markets for crowns and bridges 2008, Toronto, Ontario, Canada, Millennium Research Group, December 2007.
3. Palmer R, Dentistry without borders. dlpmagazine.comp January 2010;18.
4. Etman M.K., Woolford M.J. Three-year clinical evaluation of two ceramic crown systems: a preliminary study. J Prosthet Dent 2010, 103:80-90.
5. Kelly J.R. Ceramics in restorative and prosthetic dentistry. Ann Rev Mater Sci 1997, 27:443-468.
6. Kokubo Y., Sakurai S., Tsumita M., Ogawa T., Fukushima S. Clinical evaluation of Procera AllCeram crowns in Japanese patients: results after 5 years. J Oral Rehabil 2009, 36:786-791.
7. Marquardt P., Strub J.R. Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence Int 2006, 37:253-259.
8. Oden A., Andersson M., Krystek-Ondracek I., Magnusson D. Five-year clinical evaluation of Procera AllCeram crowns. J Prosthet Dent 1998, 80:450-456.
9. Scherrer S.S., Quinn J.B., Quinn G.D., Kelly J.R. Failure analysis of ceramic clinical cases using qualitative fractography. Int J Prosthodont 2006, 19:185-192.
10. Taskonak B., Sertgoz A. Two-year clinical evaluation of lithia-disilicate-based all-ceramic crowns and fixed partial dentures. Dent Mater 2006, 22:1008-1013.
11. Ortorp A., Kihl M.L., Carlsson G.E. A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice. J Dent 2009, 37:731-736.
12. Raigrodski A.J., Chiche G.J., Potiket N., Hochstedler J.L., Mohamed S.E., Billiot S., et al. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 2006, 96:237-244.
13. Sailer I., Feher A., Filser F., Gauckler L.J., Luthy H., Hammerle C.H. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 2007, 20:383-388.
14. Tinschert J., Schulze K.A., Natt G., Latzke P., Heussen N., Spiekermann H. Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 2008, 21:217-222.
15. Vult von Steyern P., Carlson P., Nilner K. All-ceramic fixed partial dentures designed according to the DC-zirkon technique. A 2-year clinical study. J Oral Rehabil 2005, 32:180-187.
16. Jitcharoen J., Padture N.P., Giannakopoulos A.E., Suresh S. Hertzian-crack suppression in ceramics with elastic-modulus-graded surfaces. J Am Ceram Soc 1998, 81:2301-2308.
17. Suresh S. Graded materials for resistance to contact deformation and damage. Science 2001, 292:2447-2451.
18. Zhang Y., Ma L. Optimization of ceramic strength using elastic gradients. Acta Mater 2009, 57:2721-2729.
19. Kim J.W., Liu L., Zhang Y. Improving the resistance to sliding contact damage of zirconia using elastic gradients. J Biomed Mater Res B: Appl Biomater 2010, 94:347-352.
20. Ren L., Janal M.N., Zhang Y. Sliding contact fatigue of graded zirconia with external esthetic glass. J Dent Res 2011, 90:1116-1121.
21. Suresh S., Olsson M., Giannakopoulos A.E., Padture N.P., Jitcharoen J. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater 1999, 47:3915-3926.
22. Zhang Y., Kim J.W. Graded zirconia glass for resistance to veneer fracture. J Dent Res 2010, 89:1057-1062.
23. Zhang Y., Chai H., Lawn B.R. Graded structures for all-ceramic restorations. J Dent Res 2010, 89:417-421.
24. Zhang Y., Kim J.W. Graded structures for damage resistant and aesthetic all-ceramic restorations. Dent Mater 2009, 25:781-790.
25. Zhang Y., Sun M.-J., Zhang D. Designing functionally graded materials with superior load-bearing properties. Acta Biomater 2012, 8:1101-1108. 10.1016/j.actbio.2011.11.033.
26. Suresh S., Giannakopoulos A.E., Alcala J. Spherical indentation of compositionally graded materials: theory and experiments. Acta Mater 1997, 45:1307-1321.
27. Bever M.B., Duwez P.E. Gradients in composite materials. Mater Sci Eng 1972, 10:1-8.
28. Kawasaki A., Watanabe R. Concept and P/M fabrication of functionally gradient materials. Ceram Int 1997, 23:73-83.
29. Koizumi M. Concept of FGM. Ceram Trans 1993, 34:3-10.
30. Kieback B., Neubrand A., Riedel H. Processing techniques for functionally graded materials. Mater Sci Eng A: Struct Mater Prop Microstruct Process 2003, 362:81-105.
31. Moon R.J., Bowman K.P., Trumble K.P., Rödel J. Fracture resistance curve behavior of multilayered alumina-zirconia composites produced by centrifugation. Acta Mater 2001, 49:995-1003.
32. 3 thermal barrier coating. Mater Lett 2002, 57:628-634.
33. Put S., Vleugels J., Anné G., Van der Biest O. Functionally graded ceramic and ceramic-metal composites shaped by electrophoretic deposition. Colloids Surf A: Physicochem Eng Aspects 2003, 222:223-232.
34. Wang J.W., Shaw L.L. Fabrication of functionally graded materials via inkjet color printing. J Am Ceram Soc 2006, 89:3285-3289.
35. Jennifer A.L. Direct-write assembly of ceramics from colloidal inks. Curr Opin Solid State Mater Sci 2002, 6:245-250.
36. Kingery W.D., Bowen H.K., Uhlmann D.R. Introduction to ceramics 1976, John Wiley, New York.
37. Piascik J.R., Thompson J.Y., Bower C.A., Stoner B.R. Stress evolution as a function of substrate bias in rf magnetron sputtered yttria-stabilized zirconia films. J Vac Sci Technol A 2006, 24:1091-1095.
38. Dorthé E., Zhang Y. Load-bearing increase in alumina evoked by introduction of a functional glass gradient. J Eur Ceram Soc 2012, 32:1213-1220. 10.1016/j.jeurceramsoc.2011.11.041.
39. Ren L., Liu L., Bhowmick S., Gerbig Y.B., Janal M.N., Thompson V.P., et al. Improving fatigue damage resistance of alumina through surface grading. J Dent Res 2011, 90:1026-1030.
40. Cannillo V., Manfredini T., Montorsi M., Siligardi C., Sola A. Microstructure-based modelling and experimental investigation of crack propagation in glass-alumina functionally graded materials. J Eur Ceram Soc 2006, 26:3067-3073.
41. Della Bona A., Mecholsky J.J., Barrett A.A., Griggs J.A. Characterization of glass-infiltrated alumina-based ceramics. Dent Mater 2008, 24:1568-1574.
42. Lawn B.R., Deng Y., Miranda P., Pajares A., Chai H., Kim D.K. Overview: damage in brittle layer structures from concentrated loads. J Mater Res 2002, 17:3019-3036.
43. Hamilton G.M. Explicit equations for the stresses beneath a sliding spherical contact. Proc Inst Mech Eng 1983, 197C:53-59.
44. Hamilton G.M., Goodman L.E. The stress field created by a circular sliding contact. J Appl Mech 1966, 33:371-376.
45. Kim J.W., Kim J.H., Thompson V.P., Zhang Y. Sliding contact fatigue damage in layered ceramic structures. J Dent Res 2007, 86:1046-1050.
46. Lawn B.R. Partial cone crack formation in a brittle material loaded with a sliding indenter. Proc R Soc Lond 1967, A299:307-316.
47. Kim J.H., Kim J.W., Myoung S.W., Pines M., Zhang Y. Damage maps for layered ceramics under simulated mastication. J Dent Res 2008, 87:671-675.
48. Kim J.W., Kim J.H., Janal M.N., Zhang Y. Damage maps of veneered zirconia under simulated mastication. J Dent Res 2008, 87:1127-1132.
49. Santana T., Zhang Y., Guess P., Thompson V.P., Rekow E.D., Silva N.R. Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia. Dent Mater 2009, 25:892-898.
50. Hertz H. On the contact of elastic solids. J Reine Angewandte Mathematik 1882, 92:156-171.
51. Johnson K.L. Contect mechanics Cambridge 1985, Cambridge University Press.
52. Lawn B.R. Indentation of ceramics with spheres: a century after Hertz. J Am Ceram Soc 1998, 81:1977-1994.
53. Lawn B.R., Padture N.P., Guiberteau F., Cai H. A model for microcrack initiation and propagation beneath Hertzian contacts in polycrystalline ceramics. Acta Metall 1994, 42:1683-1693.
54. Frank F.C., Lawn B.R. On the theory of Hertzian fracture. Proc R Soc Lond 1967, A299:291-306.
55. Lawn B.R. Fracture of brittle solids 1993, Cambridge University Press, Cambridge.
56. Lawn B.R., Wiederhorn S.M., Roberts D.E. Effect of sliding friction forces on the strength of brittle materials. J Mater Sci 1984, 19:2561-2569.
57. Giannakopoulos A.E., Pallot P. Two-dimensional contact analysis of elastic graded materials. J Mech Phys Solids 2000, 48:1597-1631.
58. Guler M.A., Erdogan F. Contact mechanics of graded coatings. Int J Solids Struct 2004, 41:3865-3889.
59. Guler M.A., Erdogan F. The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings. Int J Mech Sci 2007, 49:161-182.
60. Hermann I., Bhowmick S., Zhang Y., Lawn B.R. Competing fracture modes in brittle materials subject to concentrated cyclic loading in liquid environments: trilayer structures. J Mater Res 2006, 21:512-521.
61. Kelly J.R. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthe Dent 1999, 81:652-661.
62. Lawn B.R., Bhowmick S., Bush M.B., Qasim T., Rekow E.D., Zhang Y. Failure modes in ceramic-based layer structures: a basis for materials design of dental crowns. J Am Ceram Soc 2007, 90:1671-1683.
63. Zhang Y., Kim J.W., Bhowmick S., Thompson V.P., Rekow E.D. Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B: Appl Biomater 2009, 88:402-411.
64. ISO International Standard Dental ceramics 1999, ISO.
65. Bhowmick S., Zhang Y., Lawn B.R. Competing fracture modes in brittle materials subject to concentrated cyclic loading in liquid environments: bilayer structures. J Mater Res 2005, 20:2792-2800.
66. Zhang Y., Lawn B. Competing damage modes in all-ceramic crowns: fatigue and lifetime. Bioceramics 2005, 17:697-700.
67. Kim J.W., Zhang Y. Fatigue behavior of glass-infiltrated functionally graded zirconia under simulated mastication. J Dent Res 2010, 89. AADR:Abstract#1298.
68. Crisp R.J., Cowan A.J., Lamb J., Thompson O., Tulloch N., Burke F.J. A clinical evaluation of all-ceramic bridges placed in UK general dental practices: first-year results. Br Dent J 2008, 205:477-482.
69. Edelhoff D., Florian B., Florian W., Johnen C. HIP zirconia fixed partial dentures-clinical results after 3 years of clinical service. Quintessence Int 2008, 39:459-471.
70. Larsson C., Vult von Steyern P., Nilner K. A prospective study of implant-supported full-arch yttria-stabilized tetragonal zirconia polycrystal mandibular fixed dental prostheses: three-year results. Int J Prosthodont 2010, 23:364-369.
71. Larsson C., Vult von Steyern P., Sunzel B., Nilner K. All-ceramic two- to five-unit implant-supported reconstructions. A randomized, prospective clinical trial. Swed Dent J 2006, 30:45-53.
72. Molin M.K., Karlsson S.L. Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont 2008, 21:223-227.
73. Ohlmann B., Rammelsberg P., Schmitter M., Schwarz S., Gabbert O. All-ceramic inlay-retained fixed partial dentures: preliminary results from a clinical study. J Dent 2008, 36:692-696.
74. Pospiech P., Rountree P., Nothdurft F. Clinical evaluation of zirconia-based all-ceramic posterior bridges: two-year results. J Dent Res 2003, 82:114.
75. Schmitter M., Mussotter K., Rammelsberg P., Stober T., Ohlmann B., Gabbert O. Clinical performance of extended zirconia frameworks for fixed dental prostheses: two-year results. J Oral Rehabil 2009, 36:610-615.