Ceramics in restorative and prosthetic dentistry

Annual Review of Materials Science

Volumn 27, Issue 1, 1997, Pages 443-468

  Kelly, J Robert ^a  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Aesthetics; Ceramics; Clinical failure; Dentistry; Feldspar; Fracture; History; Leucite; Prostheses; Wear

Indexed keywords

BONDING; COMPOSITION; DENTAL CEMENT; DENTAL PROSTHESES; FELDSPAR; FRACTURE; MICROSTRUCTURE; SURFACE TREATMENT; WEAR OF MATERIALS;

CERAMIC RESTORATIVE SYSTEMS; CLINICAL FAILURE; LEUCITE;

CERAMIC MATERIALS;

EID: 0030691360     PISSN: 00846600     EISSN: None     Source Type: Journal    
DOI: 10.1146/annurev.matsci.27.1.443     Document Type: Article

References (145)

1. CraigRG. 1985. Restorative Dental Materials, St. Louis, MO: Mosby. pp. 60-63
2. Anusavice KJ. 1996. Phillips' Science of Dental Materials. 10th ed. Philadelphia, PA: Saunders. pp. 65-66
3. Mörmann WH. Krejci I. 1991. Clinical and SEM evaluation of CEREC inlays after 5 years in situ. In Int. Symp. Computer Restorations: State of the Art of the CEREC Method, ed. WH Mörmann, pp. 25-32. Chicago: Quintessence
4. Rucker LM, Richter W, MacEntee M, Richardson A. 1990. Porcelain and resin veneers clinically evaluated: 2-year results. J. Am. Dent. Assoc. 121:594-96
5. Giordano RA. 1996. Dental ceramic restorative systems. Compendium 17: 779-802
6. Ring ME. 1985. Dentistry, an Illustrated History, pp. 160-81, 193-211. New York: Abrams
7. Jones DW. 1985. Development of dental ceramics. Dent. Clin. North Am. 29:621-44
8. Southan DE. 1975. Dental porcelain. In Scientific Aspects of Dental Materials, ed. JA von Fraunhofer, pp. 277-305. London: Butterworths
9. Norton FH. 1978. Fine Ceramics. Technology and Applications, pp. 17, 181. Malabar, FL: Krieger
10. Kingery DW, Vandiver PB. 1986. Ceramic Masterpieces. Art, Structure, and Technology, pp. 322. New York: Free Press
11. Lehman ML, Isard JO. 1969. X-ray diffraction analysis of dental porcelain. J. Dent. Res. 48:543-45
12. O'Brien WJ. 1989. Dental Materials: Properties and Selection. Chicago: Quintessence, pp. 397-418
13. Hodson JT. 1959. Phase composition of crown and inlay porcelains. J. Dent. Res. 38:483-90
14. Mysen BO. 1988. Structure and Properties of Silicate Melts. Amsterdam: Elsevier. p. 99
15. Hermansson L, Carlsson R. 1978. On the crystallization of the glassy phases in whitewares. Trans. Br. Ceram. Soc. 77(2):32-35
16. Rouf MA, Hermansson L, Carlsson R. 1978. Crystallization of glasses in the primary phase field of leucite in the potassium oxide-aluminum oxide-silicon dioxide system. Trans. Br. Ceram. Soc. 77(2):36-39
17. Piché PW, O'Brien WJ, Groh CL, Boenke KM. 1994. Leucite content of selected dental porcelains. J. Biomed. Mater. Res. 28:603-9
18. Weinstein M, Katz S, Weinstein AB. 1962. U.S. Patent No. 3,052,982
19. Weinstein M, Weinstein AB. 1962. U.S. Patent No. 3,052,983
20. Orlowski HJ. 1944. Dental porcelain. Ohio State Univ. Eng. Exper. Stat. Bull. 118:1-34
21. 20a. Orlowski HJ, Koenig CJ. 1941. Thermal expansion of silicate fluxes in the crystalline and glassy states. J. Am. Ceram. Soc. 24:80-84
22. Mackert JR, Butts MB, Fairhurst CW. 1986. The effect of the leucite transformation on dental porcelain expansion. Dent. Mater. 2:32-36
23. Barreiro MM, Riesgo O, Vincente EE. 1989. Phase identification in dental porcelains for ceramo-metallic restorations. Dent. Mater. 5:51-57
24. Dong JK, Luthy H, Wohlwend A, Schärer P. 1992. Heat-pressed ceramics: technology and strength. Int. J. Prosthodont. 5:9-16
25. Shareef MY, Van Noort R, Messer PF, Piddock V. 1994. The effect of microstructural features on the biaxial flexural strength of leucite reinforced glass-ceramics. J. Mater. Sci. Mater. Med. 5:113-18
26. Grossman DG. 1972. Machinable glass-ceramics based upon tetrasilicic mica. J. Am. Ceram. Soc. 55:446-49
27. MacCulloch WT. 1968. Advances in dental ceramics. Br. Dent. J. 124:361-65
28. Grossman DG. 1985. Cast glass-ceramics. Dent. Clin. North Am. 29:719-23
29. Grossman DG. 1985. Processing a dental ceramic by casting methods. In Proc. Conf. Recent Developments in Dental Ceramics, ed. WJ O'Brien, RG Craig, pp. 19-40. Westerville, OH: Am. Ceram. Soc.
30. Grossman DG. 1991. Structure and physical properties of Dicor/MGC glass-ceramic. In Int. Symp. Computer Restorations: State of the Art of the CEREC Method, ed. WH Mörmann, pp. 103-115. Chicago: Quintessence
31. McLean JW, Hughs TH. 1965. The reinforcement of dental porcelain with ceramic oxides. Br. Dent. J. 119:251-67
32. Sozi RB, Riley EJ. 1985. Shrink-free ceramic. Dent. Clin. North Am. 29:707-17
33. Starling LB. 1985. Transfer molded "all ceramic crowns": the Cerestore system. In Proc. Conf. Recent Developments in Dental Ceramics: Ceramic Engineering and Science, ed. WJ O'Brien, RG Craig, 6(1-2):41-56. Columbus, OH: Am. Ceram. Soc.
34. Clause H. 1990. Vita In-Ceram, a new system for producing aluminum oxide crown and bridge substructures (Ger-man). Quint. Zahntech. 16:35-46
35. Bansal NP, Doremus RH. 1986. Handbook of Glass Properties. Orlando, FL: Academic, pp. 305, 604
36. Hornberger H, Marquis PM. 1995. Mechanical properties and microstructure of In-Ceram, a ceramic-glass composite for dental crowns. Glastech. Ber. Sci. Technol. 68:188-94
37. Seghi RR, Sorensen JA. 1995. Relative flexural strength of six new ceramic materials. Int. J. Prosthodont. 8:239-46
38. McLaren EA, Sorensen JA. 1995. Highstrength alumina crowns and fixed partial dentures generated by copy-milling technology. Quint. Dent. Technol. 18:31-38
39. Bindl A, Mörmann WH. 1996. Clinical and technical aspects of the CEREC In-Ceram crown. In CAD/CIM in Aesthetic Dentistry, ed. WH Mörmann, pp. 441-62. Chicago: Quintessence
40. Andersson M, Oden A. 1993. A new all-ceramic crown. A dense-sintered, high purity alumina coping with porcelain. Acta Odont. Scand. 51:59-64
41. Heganbarth EA. 1996. Procera aluminum oxide ceramics: a new way to achieve stability, precision, and aesthetics in all-ceramic restorations. Quint. Dent. Technol. 20:21-34
42. Rosentiel SF, Land MF, Fujimoto J. 1995. The metal-ceramic crown preparation. In Contemporary Fixed Prosthodontics. St. Louis, MO: Mosby-Year Book. pp. 180-93
43. McLean JW. 1980. The Science and Art of Dental Ceramics. Volume II: Bridge Design and Laboratory Procedures in Dental Ceramics. Chicago: Quintessence, pp. 192, 343-46
44. Anusavice KJ. 1995. Development and testing of ceramics for dental restorations. In Bioceramics: Materials and Applications, ed. G Fischman, A Clare, L Hench, 48:101-24. Westerville, OH: Am. Ceram. Soc.
45. Mackert JR, Butts MB, Morena R, Fairhurst CW. 1986. Phase changes in a leucite-containing dental porcelain frit. J. Am. Ceram. Soc. 69:C69-72
46. Barreiro MM, Vincente EE. 1993. Kinetics of isothermal phase transformations in a dental porcelain. J. Mater. Sci. Mater. Med. 4:431-36
47. Fairhurst CW, Anusavice KJ, Hashinger DT, Ringle RD, Twiggs SW. 1980 Thermal expansion of dental alloys and porcelains. J. Biomed. Mater. Res. 4:435-46
48. Mackert JR, Evans AL. 1991. Quantitative X-ray diffraction determination of leucite thermal instability in dental porcelain. J. Am. Ceram. Soc. 74:450-53
49. International Standards Organization, ISO/TC 106 (Dentistry). 1991. Specification ISO 9693, Dental porcelain fused to metal restorations. Geneva, Switzerland
50. Nielsen JP, Tuccillo JJ. 1972. Calculation of interfacial stresses in dental porcelain bonded to gold alloy substrate. J. Dent. Res. 51:1043-47
51. Mackert JR, Evans AL. 1991. Effect of cooling rate on leucite volume fraction in dental porcelains. J. Dent. Res. 70:137-39
52. Mackert JR, Twiggs SW, Evans AL. 1995. Isothermal anneal effect on leucite content in dental porcelains. J. Dent. Res. 74:1259-65
53. Mackert JR, Butts MB, Fairhurst CW. 1986. The effect of leucite transformation on dental porcelain expansion. Dent. Mater. 2:32-36
54. Anusavice KJ, Gray AE. 1989. Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures. Dent. Mater. 5:58-63
55. Fairhurst CW, Lockwood PE, Ringle RD, Thompson WO. 1992. The effect of glaze on porcelain strength. Dent. Mater. 8:203-7
56. Shareef MY, Van Noort R, Messer PF, Piddock V. 1994. The effect of microstructural features on the biaxial flexure strength of leucite reinforced glass-ceramics. J. Mater. Sci. Mater. Med. 5:113-18
57. Mackert JR, Russell CM, Evans-Williams AL. 1996. Evidence of a critical leucite particle radius for microcracking in dental porcelains. J. Dent. Rex. 75(IADR Abstr.):126:A866
58. Kelly JR, Campbell SD, Bowen HK. 1989. Fracture-surface analysis of dental ceramics. J. Prosthet. Dent. 62:536-41
59. Kelly JR, Giordano R, Pober R, Cima MJ. 1990. Fracture surface analysis of dental ceramics, clinically-failed restorations. Int. J. Prosthodont. 3:430-40
60. Thompson JY, Anusavice KJ, Morris H. 1994. Fracture surface characterization of clinically failed all-ceramic crowns. J. Dent. Res. 73:1824-32
61. Anusavice KJ, Hojjatie B. 1992. Tensile stresses in glass-ceramic crowns: effect of flaws and cement voids. Int. J. Prosthodont. 5:351-58
62. Morris DR, Kelly JR. 1995. Failure loads of bonded ceramics influenced by hydrostatic compressive stresses. J. Dent. Res. 74(Abstr.):220:A666
63. Ellert DO, Kelly JR. 1997. All-ceramic crown failure as a function of occlusal contact location. J. Dent. Res. 76(IADR Abstr.) 392:A3030
64. Moffa JP. 1988. Clinical evaluation of dental restorative materials - final report. Interagency Agreement No. IYOI-DE40001-05, San Francisco: Letterman Army Inst. Res.
65. Malament KA, Grossman DG. 1990. Clinical application of bonded Dicor crowns: a two year report. J. Dent. Res. 69(IADR Abstr.) 299:A1523
66. Malament KA, Grossman DG. 1992. Bonded vs non-bonded Dicor crowns. J. Dent Res. 71(AADR Abstr.) 321:A1720
67. Phillips CJ. 1965. The strength and weakness of brittle materials. Am. Sci. 53:20-51
68. Ritter JE, Lin MR. 1991. Effect of polymer coatings on the strength of indented soda-lime glass. Glass Technol. 32:51-4
69. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH. 1993. Strength of a dental glass-ceramic after surface coating. Dent. Mater. 9:274-79
70. Harvey CK, Kelly JR. 1996. Contact damage as a failure mode during in vitro testing. J. Prosthadont. 5:95-100
71. Kelly JR, Tesk JA, Sorensen JA. 1995. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J. Dent. Res. 74:1253-58
72. Kelly JR, Tesk JA. 1995. Clinically relevant all-ceramic FPD mechanical test analogs. J. Dent. Res. 74(Abstr.):159:A1184
73. Grant GT, Kelly JR. 1995. Fabrication and failure behavior of an all-ceramic FPD test analog. J. Dent. Res. 74(Abstr.):160:A1185
74. Fahncke CR, Kelly JR, Antonucci JM. 1997. Influence of veneering material on failure of In-Ceram FPD analogs. J. Dent. Res. 76(IADR Abstr.) 311:A2378
75. Mahalik JA, Knap FJ, Weiter EJ. 1971. Occlusal wear in prosthodontics. J. Am. Dent. Assoc. 82:154-59
76. Monasky GE. 1971. Studies on the wear of porcelain, enamel and gold. J. Prosthet. Dent. 25:299-306
77. DeLong R, Douglas WH, Sakaguchi RL, Pintado MR. 1986. The wear of dental porcelain in an artificial mouth. Dent. Mater. 2:214-19
78. Ekfeldt A, Ilo G. 1988. Occlusal contact wear of prosthodontic materials: an in vivo study. Acta Odontol Scand. 46:159-69
79. Wiley MG. 1989. Effects of porcelain on occluding surfaces of restored teeth. J. Prosthet. Dent. 61:133-37
80. Hacker CH, Wagner WC, Razzoog ME. 1996. An in vitro investigation of the wear of enamel on porcelain and gold in saliva. J. Prothel. Dent. 75:14-17
81. Larsen-Basse J. 1994. Abrasive wear of ceramics. In Friction and Wear of Ceramics, ed. S Jahanmir, pp. 99-115. New York: Dekker
82. Kelly JR, Nishimura I, Campbell SD. 1995. Ceramics in dentistry: historical roots and current perspectives. J. Prosthet. Dent. 75:18-32
83. Gentile MJ, Kelly JR. 1996. Intra-oral wear mechanisms on dental ceramics. J. Dent. Res. 75(Abstr.):50:A264
84. Seghi RR, Rosenstiel SF, Bauer P. 1991. Abrasion of human enamel by different dental ceramics in vitro. J. Dent. Res. 70:221-25
85. Reeves N, Gore K, Meiers JC, Kelly JR. 1993. Enamel wear against In-Ceram and Vitadur-N with various finishes. J. Dent. Res. 72(IADR Abstr.) 187:665
86. George LA, Eichmiller FC. 1996. Wear of enamel against glass-ceramic, porcelain and amalgam. In Challenges in Ceramic Product Development, Manufacture, and Commercialization, ed. A Gosh, R Barks R Rusin, 66:181-88. Westerville, OH: Am. Ceram. Soc.
87. Jacobi R, Shillingburg HT, Duncanson MG. 1991. A comparison of the abrasiveness of six ceramic surfaces and gold. J. Prosthet. Dent. 66:303-9
88. Campbell SD, Kelly JR. 1989. The influence of surface preparation on the strength and surface microstructure of a cast dental ceramic. Int. J. Prosthodont. 2:459-66
89. Denry IL, Rosenstiel SF. 1993. Flexural strength and fracture toughness of Dicorglass-ceramic after embedment modification. J. Dent. Res. 72:572-76
90. Krejci I, Lutz F, Reimer M. 1994. Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements. Quint. Int. 25:199-207
91. DeLong R, Pintado MR, Douglass WH. 1992. The wear of enamel opposing shaded ceramic restorative materials: an in vitro study. J. Prosthet. Dent. 68:42-48
92. Evans AG, Marshall DB. 1981. Wear mechanisms in ceramics. In Fundamentals of Friction and Wear of Materials. ed. DA Rigney, pp. 439-452. Metals Park, OH: Am. Soc. Met.
93. Lawn BR, Wiederhorn SE, Roberts DE. 1984. Effect of sliding friction forces on the strength of brittle materials. J. Mater. Sci. 19:2561-69
94. Fischer TE, Anderson MP, Jahnmir S. 1989. Influence of fracture toughness on the wear resistance of yttria-doped zirconium oxide. J. Am. Ceram. Soc. 72:252-57
95. Jahanmir S, Fischer TE. 1994. Friction and wear of ceramics. In CRC Handbook of Lubrication and Tribology, Vol. III: Monitoring, Materials, Synthetic Lubricants and Applications, ed. ER Booser pp. 103-20. Boca Raton, FL: CRC Press
96. Craig RG, Powers JM. 1976. Wear of dental tissues and materials. Int. J. Dent 26:121-33
97. Powers JM, Bayne SC. 1992. Friction and wear of dental materials. In Friction Lubrication and Wear Technology, ASM Handbook, ed. PJ Blau, 18:665-81. Materials Park, OH: ASM Int.
98. Jahanmir S, Dong X. 1995. Wear mechanism of a dental glass-ceramic. Wear 181-83:821-25
99. Southan DE. 1970. Strengthening modern dental porcelain by ion exchange. Aust. Dent. J. 15:507-10
100. Dunn B, Levy MN, Reisbeck MH. 1977. Improving the fracture resistance of dental ceramics. J. Dent. Res. 56:1209-13
101. Seghi RR, Crispin BC, Mito W. 1990. The effect of ion exchange on the flexural strength of dental porcelains. Int. J. Prosthodont. 3:130-34
102. Piddock V, Qualtrough AJE, Brough I. 1991. An investigation of an ion strengthening paste for dental porcelains. Int. J. Prosthodont. 4:132-37
103. Giordano RA, Campbell S, Pober R. 1994. Flexural strength of feldspathic porcelain treated with ion exchange, overglaze, and polishing. J. Prosthet. Dent. 71:468-72
104. Seghi RR, Denry I, Brajevic F. 1992. Effects of ion exchange on hardness and fracture toughness of dental ceramics. Int. J. Prosthodont. 5:309-14
105. Denry IL, Rosenstiel SF, Holloway JA, Niemiec MS. 1993. Enhanced chemical strengthening of feldspathic dental porcelain. J. Dent. Res. 72:1429-33
106. Osborn GD, Denry IL, Rosenstiel SF, Holloway JA. 1994. Effect of abrasion on the flexural strength of ion-exchanged porcelain. J. Dent. Res. 73(IADR Abstr.) 320:A1745
107. Holloway JA, Denry IL, Rosenstiel SF. 1994. Strengthening of feldspathic porcelain by one-step dual ion-exchange. J. Dent. Res. 73(IADR Abstr.) 320:A1746
108. Anusavice KJ, Hojjatie B. 1991. Effect of thermal tempering on strength and crack propagation behavior of feldspathic porcelains. J. Dent. Res. 70:1009-13
109. Hojjatie B, Anusavice KJ. 1993. Effects of initial temperature and tempering medium on thermal tempering of dental porcelains. J. Dent. Res. 72:566-71
110. Anusavice KJ, Gray A, Shen C. 1991. Influence of initial flaw size on crack growth in air-tempered porcelain. J. Dent. Res. 70:131-36
111. Anusavice KJ, Shen C, Vermost B, Chow B. 1992. Strengthening of porcelain by ion exchange subsequent to thermal tempering. Dent. Mater. 8:149-52
112. Hojjatie B, Anusavice KJ, Hsiao LI. 1992. Effect of abrasion on strength of thermally tempered dental ceramics. J. Dent. Res. 71(AADR Abstr.) 208:A817
113. DeHoff PH, Vontivillu SB, Anusavice KJ, Wang Z. 1994. Viscoelastic analysis of PFM crowns using finite element methods. J. Dent. Res. 73(IADR Abstr.) 369.A2141
114. Morena R, Lockwood PE, Fairhurst CW. 1986. Fracture toughness of commercial dental porcelains. Dent. Mater. 2:58-62
115. Mackert JR. 1988. Effect of thermally induced changes on porcelain-metal compatibility. In Proc. 4th Int. Symp. on Ceramics, ed. JD Preston, pp. 53-64. Chicago: Quintessence
116. Denry IL, Rosenstiel SF. 1995. Leucite stabilization in feldspathic dental porcelain. In Bioceramics; Materials and Applications II. Ceramic Transactions, ed. RP Rusin, GS Fischman, 63:115-21. Westerville, OH: Am. Ceram. Soc.
117. Yoon CK, Rasmussen ST, O'Brien WJ, Tien T-Y. 1994. Properties of leucite-glass composites prepared by a coprecipitation process. J. Mater. Res. 9:2285-89
118. Sheu T-S, O'Brien WJ, Rasmussen ST, Tien T-Y. 1994. Mechanical properties and thermal expansion behavior in leucite containing materials. J. Mater. Sci. 29:125-28
119. Denry IL, Rosenstiel SF. 1996. Effect of ion-exchange on the thermal expansion behavior of leucite-reinforced dental porcelain. Presented at Am. Ceram. Soc. Annu. Meet. Indianapolis, IN. Abstr. p. 24
120. Denry IL, Holloway JA, Rosenstiel SF. 1997. Effect of ion-exchange on the crystallization behavior of a low expansion feldspar glass. J. Dent. Res. 76(IADR Abstr.) 138:A993
121. Fischer J, Pospiech P, Gernet W. 1992. Chemical strengthening of leucite-containing dental ceramics. J. Eur. Ceram. Soc. 10:221-27
122. 2 additions. J. Am. Ceram. Soc. 69:C75-77
123. 2-modified dental glass ceramics. J. Mater. Sci. 28:6127-35
124. O'Brien WJ. 1985. Magnesia ceramic jacket crowns. Dent. Clin. North Am. 29:719-23
125. Wang M-C, Wu N-C, Hon M-H. 1994. Preparation of nepheline glass-ceramics and their application as dental porcelain. Mater. Chem. Phys. 37:370-75
126. Anusavice KJ, Zhang N-Z, Moorhead JE. 1993. Influence of colorants on crystallization and properties of lithia-based glass ceramics. J. Dent. Res. 72(IADR Abstr.) 262:A1271
127. Parsell D. 1993. The optimization of glass-ceramic heat treatment schedules. PhD thesis. Univ. Florida, Gainesville. 200 pp.
128. Anusavice KJ, Zhang N-Z. 1996. Effect of nucleation temperature on toughness and flexural strength of canasite glass-ceramic. J. Dent. Res. 75(IADR Abstr.): 67
129. George LA, Eichmiller FC, Bowen RL. 1992. An intrinsically colored microcrystalline glass-ceramic for use in dental restorations. Bull. Am. Ceram. Soc. 71:1073-76
130. Mörmann WH, Bindl A, 1996. The new creativity in ceramic restorations: dental CAD-CIM. Quint. Int. 27:821-28
131. McLaren EA, Sorensen JA. 1994. Fabrication of conservative ceramic restorations using copy milling technology. Quint. Dent. Technol. 17:19-25
132. Lehner CR, Shärer P. 1989. All-ceramic crowns. Curr. Opin. Dent. Curr. Sci. Prosthodont. Endodont. pp. 45-52
133. Luthy H. 1996. Strength and toughness of dental ceramics. In CAD/CIM in Aesthetic Dentistry, ed. WH Mörmann, pp. 229-39. Chicago: Quintessence
134. Hassan R, Caputo AA, Bunshah RF. 1981. Fracture toughness of human enamel. J. Dent. Res. 60:820-27
135. Rasmussen ST, Patchin RE. 1984. Fracture properties of human enamel and dentin in an aqueous environment. J. Dent. Res. 63:1362-68
136. Xu HHK, Smith DT, Jahanmir S, Romberg E, Kelly JR, Thompson VP, Rekow ED. 1997. Indentation damage and mechanical properties of human enamel and dentin. J. Dent. Res. In review
137. Lawn BR, Padture NP, Cai H, Guiberteau F. 1994. Making ceramics "ductile." Science 263:1114-16
138. Wuttiphan S, Lawn BR, Padture NP. 1996. Crack suppression in strongly bonded homogeneous/heterogeneous laminates: a study on glass/glass-ceramic bilayers. J. Am. Ceram. Soc. 79:634-40
139. Liu H, Lawn BR, Hsu SM. 1996. Hertzian contact response of tailored silicon nitride multilayers. J. Am. Ceram. Soc. 79:10009-14
140. Ritter JE. 1978. Engineering design and fatigue failure of brittle materials. In Fracture Mechanics of Ceramics, ed. RC Bradt, DPH Hasselman, FF Lange, 4:667-86. New York: Plenum
141. Jones DW, Sutow EJ. 1987. Stress corrosion failure of dental porcelain. Br. Ceram. Trans. J. 86:40-43
142. Sherrill CA, O'Brien WJ. 1974. Transverse strength of aluminous and feldspathic porcelain. J. Dent. Res. 53:683-90
143. Meyers ML, Ergle JW, Fairhurst CW, Ringle RD. 1994. Fatigue characteristics of a high strength porcelain. Int. J. Prosthodont. 7:253-57
144. Meyers ML, Ergle JW, Fairhurst CW, Ringle RD. 1994. Fatigue failure parameters of IPS-Empress porcelain. Int. J. Prosthodont. 7:549-53
145. Rosenstiel SF, Denry IL, Zhu W, Gupta PK, Van der Sluys RA. 1993 Fluoroalkylethyl silane coatings as a moisture barrier for dental ceramics. J. Biomed. Mater. Res. 27:415-17