Graded structures for damage resistant and aesthetic all-ceramic restorations

Dental Materials

Volumn 25, Issue 6, 2009, Pages 781-790

  Zhang, Yu ^a   Kim, Jae Won ^a  

^a NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

Author keywords

Aesthetics; Damage resistance; Dental ceramic; Graded structures; Zirconia

Indexed keywords

AESTHETIC PROPERTIES; AESTHETICS; ALL CERAMICS; CLINICAL STUDIES; CRITICAL LOADS; CRYSTALLINE PHASIS; DAMAGE RESISTANCE; DENTAL CERAMIC; FUNCTIONALLY GRADED; GLASS LAYERS; GLASS POWDERS; GRADED STRUCTURES; NANO INDENTATIONS; OUTER SURFACES; POLYCARBONATE SUBSTRATES; POWER-LAW RELATIONS; RADIAL FRACTURES; SEM; SPHERICAL INDENTER; X-RAY DIFFRACTIONS; YOUNG'S MODULUS; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS; ZIRCONIA POWDERS;

ALUMINA; CEMENTING (SHAFTS); CEMENTS; CERAMIC MATERIALS; DENTAL MATERIALS; ELASTIC MODULI; ELASTICITY; FRACTURE; GLASS; HARDNESS; PLATES (STRUCTURAL COMPONENTS); POWDERS; RESINS; RESTORATION; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

YTTRIUM ALLOYS;

GLASS; GLASS CERAMICS; RESIN CEMENT; YTTRIA STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIUM; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTURE; HARDNESS; MATERIALS TESTING; PLIABILITY; SCANNING ELECTRON MICROSCOPY; SYNTHESIS; TOOTH CROWN; TOOTH PROSTHESIS; X RAY CRYSTALLOGRAPHY; YOUNG MODULUS;

CERAMICS; CROWNS; CRYSTALLOGRAPHY, X-RAY; DENTAL BONDING; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; DENTURE, PARTIAL, FIXED; ELASTIC MODULUS; ESTHETICS, DENTAL; GLASS; HARDNESS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; RESIN CEMENTS; YTTRIUM; ZIRCONIUM;

EID: 67349123824     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.01.002     Document Type: Article

References (33)

1. Lawn B.R., Deng Y., and Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent 86 November (5) (2001) 495-510
2. Burke F.J., Fleming G.J., Nathanson D., and Marquis P.M. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 4 1 (2002) 7-22
3. Blatz M.B., Sadan A., and Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89 March (3) (2003) 268-274
4. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 January (1) (1998) 64-71
5. Zhang Y., Lawn B.R., Malament K.A., Van Thompson P., and Rekow E.D. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 19 September-October (5) (2006) 442-448
6. Zhang Y., Lawn B.R., Rekow E.D., and Thompson V.P. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B: Appl Biomater 71 November (2) (2004) 381-386
7. Sailer I., Holderegger C., Jung R.E., Suter A., Thievent B., Pietrobon N., et al. Clinical study of the color stability of veneering ceramics for zirconia frameworks. Int J Prosthodont 20 May-June (3) (2007) 263-269
8. Jitcharoen J., and Padture N.P. Hertzian-Crack suppression in ceramics with elastic-modulus-graded surfaces. J Am Ceram Soc 81 9 (1998) 2301-2308
9. Suresh S., Giannakopoulos A.E., and Alcala J. Spherical indentation of compositionally graded materials: theory and experiments. Acta Mater 45 4 (1997) 1307-1321
10. Pender D.C., Padture N.P., Giannakopoulos A.E., and Suresh S. Gradients in elastic modulus for improved contact-damage resistance: Part I. The silicon nitride-oxynitride glass system. Acta Mater 49 16 (2001) 3255-3262
11. Suresh S., Olsson M., Giannakopoulos A.E., Padture N.P., and Jitcharoen J. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater 47 14 (1999) 3915-3926
12. Kingery W.D., Bowen H.K., and Uhlmann D.R. Introduction to ceramics. Second ed. (1976), John Wiley, New York
13. Piascik J.R., Thompson J.Y., Bower C.A., and Stoner B.R. Stress evolution as a function of substrate bias in rf magnetron sputtered yttria-stabilized zirconia films. J Vac Sci Technol A 24 July-August (4) (2006) 1091-1095
14. Chevalier J. What future for zirconia as a biomaterial?. Biomaterials 27 (2006) 534-543
15. Chevalier J., Cales B., and Drouin J.M. Low-temperature aging of Y-YZP ceramics. J Am Ceram Soc 82 8 (1999) 2150-2154
16. Piconi C., and Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 20 January (1) (1999) 1-25
17. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res 7 6 (1992) 1564-1583
18. Oliver W.C., and Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19 1 (2004) 3-20
19. Zhang Y., Kim J.W., Bhowmick S., Thompson V.P., and Rekow E.D. Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. J Biomed Mater Res B: Appl Biomater (May 13, 2008) [published online]
20. Kelly J.R. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 81 6 (1999) 652-661
21. Lawn B.R., Bhowmick S., Bush M.B., Qasim T., Rekow E.D., and Zhang Y. Failure modes in ceramic-based layer structures: a basis for materials design of dental crowns. J Am Ceram Soc 90 6 (2007) 1671-1683
22. Lawn B.R., Deng Y., Miranda P., Pajares A., Chai H., and Kim D.K. Overview: damage in brittle layer structures from concentrated loads. J Mater Res 17 12 (2002) 3019-3036
23. Zhang Y., and Lawn B. Long-term strength of ceramics for biomedical applications. J Biomed Mater Res B: Appl Biomater 69 May (2) (2004) 166-172
24. Zhang Y., Pajares A., and Lawn B.R. Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems. J Biomed Mater Res B: Appl Biomater 71 October (1) (2004) 166-171
25. Kim J.W., Bhowmick S., Hermann I., and Lawn B.R. Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns. J Biomed Mater Res B: Appl Biomater 79 October (1) (2006) 58-65
26. Dong J.K., Luthy H., Wohlwend A., and Scharer P. Heat-pressed ceramics: technology and strength. Int J Prosthodont 5 January-February (1) (1992) 9-16
27. Luthy H., Dong J.K., Wohlwend A., and Scharer P. Effects of veneering and glazing on the strength of heat-pressed ceramics. Schweiz Monatsschr Zahnmed 103 10 (1993) 1257-1260
28. Aboushelib M.N., Kleverlaan C.J., and Feilzer A.J. Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent 98 5 (2007) 379-388
29. Sundh A., Molin M., and Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 21 (2005) 476-482
30. Vult von Steyern P., Ebbesson S., Holmgren J., Haag P., and Nilner K. Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling. J Oral Rehabil 33 September (9) (2006) 682-689
31. Zhang Y., and Lawn B.R. Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. J Biomed Mater Res B: Appl Biomater 72 February (2) (2005) 388-392
32. Wegner S.M., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 Summer (2) (2000) 139-147
33. Krejci I., Albert P., and Lutz F. The influence of antagonist standardization on wear. J Dent Res 78 February (2) (1999) 713-719