Biomechanical and histomorphometric analysis of etched and non-etched resorbable blasting media processed implant surfaces: An experimental study in dogs

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 3, Issue 5, 2010, Pages 382-391

  Marin, Charles ^a   Granato, Rodrigo ^b   Suzuki, Marcelo ^c   Janal, Malvin N ^d   Gil, Jose N ^b   Nemcovsky, Carlos ^e   Bonfante, Estevam A ^d   Coelho, Paulo G ^d  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^b FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

^c TUFTS UNIVERSITY SCHOOL OF DENTAL MEDICINE   (United States)

^d NEW YORK UNIVERSITY   (United States)

^e TEL AVIV UNIVERSITY   (Israel)

Author keywords

Characterization; Dental implant; In vivo; Resorbable blasting media; Surface

Indexed keywords

ACID-ETCHING; BONE AREA; BONE FORMATION; BONE RESPONSE; BONE-TO-IMPLANT CONTACT; EXPERIMENTAL STUDIES; HISTOMORPHOMETRIC ANALYSIS; IMPLANT SURFACE; IN VIVO; INTERFACE FAILURE; RESORBABLE; TI-6AL-4V;

ALUMINA; ATOMIC FORCE MICROSCOPY; ATOMIC SPECTROSCOPY; BIOMECHANICS; BLASTING; CHARACTERIZATION; DENTAL PROSTHESES; ETCHING; PHOSPHORUS; SCANNING ELECTRON MICROSCOPY; SURFACES; X RAY PHOTOELECTRON SPECTROSCOPY;

BONE;

CALCIUM; PHOSPHORUS; ALUMINUM OXIDE;

ANIMAL EXPERIMENT; ARTICLE; ATOMIC FORCE MICROSCOPY; BIOMECHANICS; CONTROLLED STUDY; DOG; IMPLANT; IN VIVO STUDY; MALE; MORPHOMETRICS; NONHUMAN; OSSIFICATION; PRIORITY JOURNAL; RESORBABLE BLASTING MEDIA PROCESSED IMPLANT; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TIBIA; X RAY PHOTOELECTRON SPECTROSCOPY; ANIMAL; BIODEGRADABLE IMPLANT; EQUIPMENT; EVALUATION; MICROPHOTOGRAPHY; PHYSIOLOGY; TIME; TORQUE;

ABSORBABLE IMPLANTS; ALUMINUM OXIDE; ANIMALS; BIOMECHANICS; CALCIUM; DOGS; EQUIPMENT FAILURE ANALYSIS; MALE; MICROSCOPY, ATOMIC FORCE; MICROSCOPY, ELECTRON, SCANNING; PHOSPHORUS; PHOTOELECTRON SPECTROSCOPY; PHOTOMICROGRAPHY; TIBIA; TIME FACTORS; TORQUE;

EID: 77954985937     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2010.02.002     Document Type: Article

References (43)

1. Abrahamsson I., Berglundh T., Linder E., Lang N.P., Lindhe J. Early bone formation adjacent to rough and turned endosseous implant surfaces. An experimental study in the dog. Clin. Oral Implants Res. 2004, 15(4):381-392.
2. Albrektsson T., Sennerby L. State of the art in oral implants. J. Clin. Periodontol. 1991, 18(6):474-481.
3. Albrektsson T., Wennerberg A. Oral implant surfaces: part 1-review focusing on topographic and chemical properties of different surfaces and in vivo responses to them. Int. J. Prosthodont. 2004, 17(5):536-543.
4. Albrektsson T., Wennerberg A. Oral implant surfaces: part 2-review focusing on clinical knowledge of different surfaces. Int. J. Prosthodont. 2004, 17(5):544-564.
5. Albrektsson T., Sennerby L., Wennerberg A. State of the art of oral implants. Periodontol 2000, 47:15-26.
6. Berglundh T., Abrahamsson I., Lang N.P., Lindhe J. De novo alveolar bone formation adjacent to endosseous implants. Clin. Oral Implants Res. 2003, 14(3):251-262.
7. Branemark P.I., Hansson B.O., Adell R., Breine U., Lindstrom J., Hallen O., et al. Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. Scand. J. Plast. Reconstr. Surg. Suppl. 1977, 16:1-132.
8. Buser D., Broggini N., Wieland M., Schenk R.K., Denzer A.J., Cochran D.L., et al. Enhanced bone apposition to a chemically modified SLA titanium surface. J. Dent. Res. 2004, 83(7):529-533.
9. Butz F., Aita H., Wang C.J., Ogawa T. Harder and stiffer bone osseointegrated to roughened titanium. J. Dent. Res. 2006, 85(6):560-565.
10. Cheang P., Khor K.A. Addressing processing problems associated with plasma spraying of hydroxyapatite coatings. Biomaterials 1996, 17(5):537-544.
11. Coelho P.G., Lemons J.E. Physico/chemical characterization and in vivo evaluation of nanothickness bioceramic depositions on alumina-blasted/acid-etched Ti-6Al-4V implant surfaces. J. Biomed. Mater. Res. A 2009, 90(2):351-361.
12. Coelho P.G., Cardaropoli G., Suzuki M., Lemons J.E. Early healing of nanothickness bioceramic coatings on dental implants. An experimental study in dogs. J. Biomed. Mater. Res. B Appl. Biomater. 2009, 88(2):387-393.
13. Coelho P.G., Granjeiro J.M., Romanos G.E., Suzuki M., Silva N.R., Cardaropoli G., et al. Basic research methods and current trends of dental implant surfaces. J. Biomed. Mater. Res. B Appl. Biomater. 2009, 88(2):579-596.
14. Coelho P.G., Suzuki M., Guimaraes M.V., Marin C., Granato R., Gil J.N., et al. Early bone healing around different implant bulk designs and surgical techniques: a study in dogs. Clin. Implant. Dent. Relat. Res. 2009.
15. Davies J.E. Bone bonding at natural and biomaterial surfaces. Biomaterials 2007, 28(34):5058-5067.
16. de Bruijn J.D., Bovell Y.P., van Blitterswijk C.A. Structural arrangements at the interface between plasma sprayed calcium phosphates and bone. Biomaterials 1994, 15(7):543-550.
17. deGroot K K.C., Wolke J.G.C., deBieck-Hogervorst J.M. Plasma-sprayed coating of calcium phosphate. Handbook of Bioactive Ceramics, vol II, Calcium Phosphate and Hydroxyapatite Ceramics 1990, 17-25. CRC Press, Boca Raton. T. H.L. Yamamuro, J. Wilson (Eds.).
18. Donath K., Breuner G. A method for the study of undecalcified bones and teeth with attached soft tissues. The Sage-Schliff (sawing and grinding) technique. J. Oral Pathol. 1982, 11(4):318-326.
19. Granato R., Marin C., Suzuki M., Gil J.N., Janal M.N., Coelho P.G. Biomechanical and histomorphometric evaluation of a thin ion beam bioceramic deposition on plateau root form implants: an experimental study in dogs. J. Biomed. Mater. Res. B Appl. Biomater. 2009, 90(1):396-403.
20. Grizon F., Aguado E., Hure G., Basle M.F., Chappard D. Enhanced bone integration of implants with increased surface roughness: a long term study in the sheep. J. Dent. 2002, 30(5-6):195-203.
21. Huang Y.H., Xiropaidis A.V., Sorensen R.G., Albandar J.M., Hall J., Wikesjo U.M. Bone formation at titanium porous oxide (TiUnite) oral implants in type IV bone. Clin. Oral Implants Res. 2005, 16(1):105-111.
22. Jungner M., Lundqvist P., Lundgren S. Oxidized titanium implants (Nobel Biocare TiUnite) compared with turned titanium implants (Nobel Biocare mark III) with respect to implant failure in a group of consecutive patients treated with early functional loading and two-stage protocol. Clin. Oral Implants Res. 2005, 16(3):308-312.
23. Kay J. Calcium phosphate coatings for dental implants. Dental Clinics of North America. 1992, 36:1-18.
24. Kim H., Camata R.P., Vohra Y.K., Lacefield W.R. Control of phase composition in hydroxyapatite/tetracalcium phosphate biphasic thin coatings for biomedical applications. J. Mater. Sci. Mater. Med. 2005, 16(10):961-966.
25. Klokkevold P.R., Nishimura R.D., Adachi M., Caputo A. Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit. Clin. Oral Implants Res. 1997, 8(6):442-447.
26. Lacefield W.R. Hydroxyapatite coatings. Ann. N Y Acad. Sci. 1988, 523:72-80.
27. Lacefield W.R. Current status of ceramic coatings for dental implants. Implant Dent. 1998, 7(4):315-322.
28. Lemons J.E. Biomaterials, biomechanics, tissue healing, and immediate-function dental implants. J. Oral Implantol. 2004, 30(5):318-324.
29. Leonard G., Coelho P., Polyzois I., Stassen L., Claffey N. A study of the bone healing kinetics of plateau versus screw root design titanium dental implants. Clin. Oral Implants Res. 2009, 20(3):232-239.
30. Marin C., Granato R., Suzuki M., Gil J.N., Piattelli A., Coelho P.G. Removal torque and histomorphometric evaluation of bioceramic grit-blasted/acid-etched and dual acid-etched implant surfaces: an experimental study in dogs. J. Periodontol. 2008, 79(10):1942-1949.
31. Meirelles L., Arvidsson A., Albrektsson T., Wennerberg A. Increased bone formation to unstable nano rough titanium implants. Clin. Oral Implants Res. 2007, 18(3):326-332.
32. Meirelles L., Albrektsson T., Kjellin P., Arvidsson A., Franke-Stenport V., Andersson M., et al. Bone reaction to nano hydroxyapatite modified titanium implants placed in a gap-healing model. J. Biomed. Mater. Res. A 2008, 87(3):624-631.
33. Meirelles L., Arvidsson A., Andersson M., Kjellin P., Albrektsson T., Wennerberg A. Nano hydroxyapatite structures influence early bone formation. J. Biomed. Mater. Res. A 2008, 87(2):299-307.
34. Mendes V.C., Moineddin R., Davies J.E. The effect of discrete calcium phosphate nanocrystals on bone-bonding to titanium surfaces. Biomaterials 2007.
35. Ong J.L., Carnes D.L., Bessho K. Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo. Biomaterials 2004, 25(19):4601-4606.
36. Schnitman P.A., Wohrle P.S., Rubenstein J.E., DaSilva J.D., Wang N.H. Ten-year results for Branemark implants immediately loaded with fixed prostheses at implant placement. Int. J. Oral Maxillofac. Implants. 1997, 12(4):495-503.
37. Shibli J.A., Grassi S., Piattelli A., Pecora G.E., Ferrari D.S., Onuma T., et al. Histomorphometric evaluation of bioceramic molecular impregnated and dual acid-etched implant surfaces in the human posterior maxilla. Clin. Implant. Dent. Relat. Res. 2009.
38. Suzuki M., Guimaraes M.V., Marin C., Granato R., Gil J.N., Coelho P.G. Histomorphometric evaluation of alumina-blasted/acid-etched and thin ion beam-deposited bioceramic surfaces: an experimental study in dogs. J. Oral Maxillofac Surg. 2009, 67(3):602-607.
39. Vercaigne S., Wolke J.G., Naert I., Jansen J.A. A mechanical evaluation of TiO2-gritblasted and Ca-P magnetron sputter coated implants placed into the trabecular bone of the goat: part 1. Clin. Oral Implants Res. 2000, 11(4):305-313.
40. Wennerberg A., Ektessabi A., Albrektsson T., Johansson C., Andersson B. A 1-year follow-up of implants of differing surface roughness placed in rabbit bone. Int. J. Oral Maxillofac. Implants 1997, 12(4):486-494.
41. Xiropaidis A.V., Qahash M., Lim W.H., Shanaman R.H., Rohrer M.D., Wikesjo U.M., et al. Bone-implant contact at calcium phosphate-coated and porous titanium oxide (TiUnite)-modified oral implants. Clin. Oral Implants Res. 2005, 16(5):532-539.
42. Yang C.Y., Wang B.C., Lee T.M., Chang E., Chang G.L. Intramedullary implant of plasma-sprayed hydroxyapatite coating: an interface study. J. Biomed. Mater. Res. 1997, 36(1):39-48.
43. Yang Y., Kim K.H., Ong J.L. A review on calcium phosphate coatings produced using a sputtering process-an alternative to plasma spraying. Biomaterials 2005, 26(3):327-337.