In-situ stress and strain measurements around cracks using synchrotron X-ray diffraction

Journal of Strain Analysis for Engineering Design

Volumn 46, Issue 7, 2011, Pages 593-606

  Steuwer, A ^a,b   Daniels, J E ^c  

^a EUROPEAN SPALLATION SOURCE ERIC   (Sweden)

^b NELSON MANDELA METROPOLITAN UNIVERSITY   (South Africa)

^c UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Crack growth; Fracture mechanics; Residual stress; Synchrotron X ray diffraction

Indexed keywords

BULK MATERIALS; ENGINEERING MATERIALS; HIGH SPATIAL RESOLUTION; HIGH-ENERGY SYNCHROTRON X-RAYS; IN-SITU PROCESS; INSITU STRESS; STRAIN FIELDS; SYNCHROTRON X-RAY DIFFRACTION;

CRACK PROPAGATION; CRACKS; FRACTURE MECHANICS; GROWTH (MATERIALS); RESIDUAL STRESSES; STRAIN MEASUREMENT; SYNCHROTRON RADIATION; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

SYNCHROTRONS;

EID: 81455136796     PISSN: 03093247     EISSN: 20413130     Source Type: Journal    
DOI: 10.1177/0309324711408501     Document Type: Article

References (42)

1. Khatibi, G., Lederer, M., Weiss, B., Licht, T., Bernardi, J., and Danninger, H. Accelerated mechanical fatigue testing and lifetime of interconnects in microelectronics. Fatigue, 2010, 2(1), 511-519.
2. Neidel, A., Matijasevic-Lux, B., Riesenbeck, S., Ullrich, T., Volker, J., and Wallich, S. Schäden an Brennerkomponenten von Heavy Duty-Gasturbi-nen (Failure of burner components of heavy duty gas turbines). Prakt. Metallogr., 2010, 47(3), 135-149 (in German).
3. Withers, P. J. Residual stress and its role in failure. Rep. Prog. Phys., 2007, 70(12), 2211-2264.
4. Fitzpatrick, M. E. and Lodini, A. Analysis of residual stresses using neutron and synchrotron radiation, 2003 (Taylor & Francis, London).
5. Kerr, M., Daymond, M. R., Holt, R. A., Almer, J. D., Stafford, S., and Colas, K. B. Fracture of a minority phase at a stress concentration observed with synchrotron X-ray diffraction. Scripta Metall. Mater., 2009, 61(10), 939-942.
6. Steuwer, A., Edwards, L., Pratihar, S., Ganguly, S., Peel, M., Fitzpatrick, M. E., Marrow, T. J., Withers, P. J., Sinclair, I., Singh, K. D., Gao, N., Buslaps, T., and Buffiere, J. Y. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction. Nucl. Instrum. Meth. B, 2006, 246(1), 217-225.
7. Steuwer, A., Daniels, J. E., and Peel, M. J. In situ crack growth studies of hydrided Zircaloy-4 on a single-edge notched tensile specimen. Scripta Metall. Mater., 2009, 61(4), 431-433.
8. Croft, M., Zhong, Z., Jisrawi, N., Zakharchenko, I., Holtz, R. L., Skaritka, J., Fast, T., Sadananda, K., Lakshmipathy, M., and Tsakalakos, T. Strain profiling of fatigue crack overload effects using energy dispersive X-ray diffraction. Int. J. Fatigue, 2005, 27(10-12), 1408-1419. (Pubitemid 41497973)
9. Buffiere, J. Y., Ferrie, E., Proudhon, H., and Ludwig, W. Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography. Mater. Sci. Technol., 2006, 22(9), 1019-1024. (Pubitemid 44535915)
10. Croft, M., Shukla, V., Jisrawi, N. M., Zhong, Z., Sadangi, R. K., Holtz, R. L., Pao, P. S., Horvath, K., Sadananda, K., Ignatov, A., Skaritka, J., and Tsakalakos, T. Mapping and load response of overload strain fields: synchrotron X-ray measurements. Int. J. Fatigue, 2009, 31(11-12), 1669-1677.
11. Croft, M. C., Jisrawi, N. M., Zhong, Z., Holtz, R. L., Sadananda, K., Skaritka, J. R., and Tsakalakos, T. Fatigue history and in-situ loading studies of the overload effect using high resolution X-ray strain profiling. Int. J. Fatigue, 2007, 29(9-11), 1726-1736. (Pubitemid 47284425)
12. Belnoue, J. P., Jun, T.-S., Hofmann, F., Abbey, B., and Korsunsky, A. M. Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping. Engng Fract. Mech., 2010, 77(16), 3216-3226.
13. Gross, D. and Seelig, T. Fracture mechanics: With an introduction to micromechanics, 2006 (Springer, Berlin).
14. Suresh, S. Fatigue of materials, 1998 (Cambridge University Press, Cambridge).
15. ASTM. ASTM E647-00, Standard test method for measurement of fatigue crack growth rates, ASTM International, 2000.
16. ISO. ISO 7539-6, Corrosion of metals and alloys-Stress corrosion testing-Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement, 2nd edn, International Organization for Standardization, 2003.
17. Poulsen, H. F., Fu, X., Knudsen, E., Lauridsen, E. M., Margulies, L., and Schmidt, S. 3DXRD: Mapping grains and their dynamics in 3 dimensions. Mater. Sci. Forum, 2004, 467-470, 1363-1372. (Pubitemid 40498571)
18. Latiere, H. J. and Pichard, C. X-ray micro-diffraction study of the plastic zone at the tip of the fatigue cracks in manganese austenitic steels. CR Acad. Sci. II, 1982, 295(1), 1-4.
19. Blyumenauer, K. and Zutkhoff, B. X-ray-diffraction determination of stress-distribution in specimens with fatigue cracks. Strength Mater., 1981, 13(3), 281-283.
20. Braynin, L. Y., Brusilov, Ba., Gashutin, V. P., and Tupilko, V. M. Metallographic and X-ray diffraction analysis of steel fractures with hairline cracks. Phys. Met. Metallogr. USSR, 1968, 25, 129.
21. Dias, A., Lebrun, J. L., and Bignonnet, A. X-ray diffraction studies on fatigue crack plastic zones developed under plane strain state conditions. Fatigue Fract. Engng Mater. Struct., 1999, 22(2), 133-144.
22. Batista, A. C., Costa, J. D., Dias, A. M., and Lebrun, J. L. X-ray fractography on an Al-alloy fatigue fracture surface. In Residual stresses III: science and technology (Eds H. Fujiwara, T. Abe, and K. Tanaka), 1992, vols 1 and 2. pp. 1465-1470 (Elsevier Applied Science, London).
23. Robertson, S. W., Ritchie, R. O., Mehta, A., Gong, X. Y., and Pelton, A. R. Ultrahigh-resolution in situ diffraction characterization of the local mechanics at a growing crack tip in Nitinol. In Proceedings of SMST 2006: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, 7-11 May 2006, pp. 35-41 (ASM International, Materials Park, Ohio, USA).
24. Pyzalla, A., Camin, B., Buslaps, T., Di Michiel, M., Kaminski, H., Kottar, A., Pernack, A., and Reimers, W. Simultaneous tomography and diffraction analysis of creep damage. Science, 2005, 308(5718), 92-95. (Pubitemid 40471004)
25. Buffiere, J. Y., Maire, E., Adrien, J., Masse, J. P., and Boller, E. In situ experiments with X-ray tomography: an attractive tool for experimental mechanics. Exp. Mech., 2010, 50(3), 289-305.
26. Withers, P. J., Lopez-Crespo, P., Kyrieleis, A., and Hung, Y.-C. Insights into fracture mechanics for Ti/SiC fibre composite by 4D X-ray microtomogra-phy. In Proceedings of the 31st Risø Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques (Eds D. Hansen, S. F. Juul Jensen, H. F. Nielsen, Poulsen, and B. Ralph), Risoe National Laboratory, 2010.
27. Steuwer, A., Santisteban, J. R., Turski, M., Withers, P. J., and Buslaps, T. High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data. J. Appl. Crystallogr., 2004, 37(6), 883-889.
28. Turski, M., Bouchard, P. J., Steuwer, A., and Withers, P. J. Residual stress driven creep cracking in AISI Type 316 stainless steel. Acta Mater., 2008, 56(14), 3598-3612.
29. Korsunsky, A. M., Collins, S. P., Owen, R. A., Daymond, M. R., Saida, A., and James, K. A. Fast residual stress mapping using energy-dispersive synchrotron X-ray diffraction on station 16.3 at the SRS. J. Synchrotron Radiat., 2002, 9(2), 77-81.
30. Liss, K. D., Bartels, A., Schreyer, A., and Clemens, H. High-energy X-rays: a tool for advanced bulk investigations in materials science and physics. Texture. Microstruct., 2003, 35(3/4), 219-252. (Pubitemid 38092333)
31. Young, R. E. The Rietveld method, 1993 (Oxford University Press, Oxford).
32. Steuwer, A., Peel, M., and Buslaps, T. Aspects of residual stress determination using energy-dispersive synchrotron X-ray diffraction. Mater. Sci. Forum, 2006, 524-525, 267-272.
33. Daniels, J. E. Determination of directionally dependent structural and microstructural information using high-energy X-ray diffraction. J. Appl. Crystallogr., 2008, 41(6), 1109-1114.
34. Nielsen, S. F., Wolf, A., Poulsen, H. F., Ohler, M., Lienert, U., and Owen, R. A. A conical slit for three-dimensional XRD mapping. J. Synchrotron Radiat., 2000, 7(2), 103-109.
35. Martins, R. V. and Honkimaki, V. Depth resolved investigation of friction stir welds made from AA2024/AA2024 and AA2024/AA6082 using a spiral slit and high energy synchrotron radiation. Mater. Sci. Forum, 2005, 490-491, 424-429. (Pubitemid 47543963)
36. Poulsen, H. F., Wert, J. A., Neuefeind, J., Honkimaki, V., and Daymond, M. Measuring strain distributions in amorphous materials. Nat. Mater., 2005, 4, 33-36. (Pubitemid 40020998)
37. Steuwer, A., Rahman, M., Shterenlikht, A., Fitzpatrick, M. E., Edwards, L., and Withers, P. J. The evolution of crack-tip stresses during a fatigue overload event. Acta Mater. 2010, 58(11), 4039-4052.
38. IAEA. Delayed hydride cracking in zirconium alloys in pressure tube nuclear reactors, IAEA-TECDOC-1410, IAEA, Vienna, 2004.
39. Lanzani, L. and Ruch, M. Comments on the stability of zirconium hydride phases in Zircaloy. J. Nucl. Mater., 2004, 324(2-3), 165-176.
40. Steuwer, A., Santisteban, J. R., Preuss, M., Peel, M. J., Buslaps, T., and Harada, M. Evidence of stress-induced hydrogen ordering in zirconium hydrides. Acta Mater., 2009, 57(1), 145-152.
41. Jones, J. L., Motahari, S. M., Varlioglu, M., Lienert, U., Bernier, J. V., Hoffman, M., and Ustündag, E. Crack tip process zone domain switching in a soft lead zirconate titanate ceramic. Acta Mater., 2007, 55(16), 5538-5548. (Pubitemid 47302377)
42. Pojprapai, S., Russell, J., Man, H., Jones, J. L., Daniels, J. E., and Hoffman, M. Frequency effects on fatigue crack growth and crack tip domain-switching behavior in a lead zirconate titanate ceramic. Acta Mater., 2009, 57(13), 3932-3940.